Skip to content

L
lx2160a_build
Commit 10c5ead0 authored by Rabeeh Khoury's avatar Rabeeh Khoury
Browse files
Options

linux patches 

Signed-off-by: default avatarRabeeh Khoury <rabeeh@solid-run.com>
parent f383cd50
Show whitespace changes
Inline Side-by-side
Showing with 297 additions and 0 deletions
patches/linux/0001-arm64-dts-lx2160a-add-lx2160acex7-device-tree-build.patch 0 → 100644
View file @ 10c5ead0
From 7eedfa6d3725d1a10499a14415d34de1b4666e7a Mon Sep 17 00:00:00 2001
From: Rabeeh Khoury <rabeeh@solid-run.com>
Date: Sun, 28 Jul 2019 14:18:55 +0300
Subject: [PATCH 1/3] arm64: dts: lx2160a: add lx2160acex7 device tree build
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index c46538f38181..3a72b3d3a67a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -29,3 +29,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-cex7.dtb
--
2.17.1
patches/linux/0002-arm64-dts-lx2160a-add-lx2160acex7-device-tree.patch 0 → 100644
View file @ 10c5ead0
From 35dc5b03bb8f7b93fb474c39d7689d39062ff81a Mon Sep 17 00:00:00 2001
From: Rabeeh Khoury <rabeeh@solid-run.com>
Date: Sun, 28 Jul 2019 14:21:06 +0300
Subject: [PATCH 2/3] arm64: dts: lx2160a: add lx2160acex7 device tree
The device tree enables the following features -
1. dpmac17 RGMII MAC connected to Atheros AR8035 phy
2. 2x MDIO busses
3. 2x USB 3.0 controllers
4. 4x SATA ports
5. MT35X 512Mb SPI flash
6. Temperature sensor on i2c0 channel 3
7. AMC6821 temperature and PWM fan controller
The module supports AMC6821 and EMC2301 PWM controllers where either can
be assembled, but not both together since the PWM and TACH signals are
shared between them.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
---
.../boot/dts/freescale/fsl-lx2160a-cex7.dts | 190 ++++++++++++++++++
1 file changed, 190 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dts
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dts
new file mode 100644
index 000000000000..872fcf9e724d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A-CEx7
+//
+// Copyright 2019 SolidRun ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+ model = "SolidRun LX2160A COM express type 7 module";
+ compatible = "fsl,lx2160a-cex7", "fsl,lx2160a";
+
+ aliases {
+ crypto = &crypto;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "RT7290";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ status = "okay";
+};
+
+
+/*
+i2c busses are -
+/dev/i2c0 - CTRL #0 - connected to PCA9547 I2C switch
+/dev/i2c1 - CTRL #2 - COM module to carrier (general I2C_CK/I2C_DAT)
+/dev/i2c2 - CTRL #4 - Connected to RTC PCF2129AT (0x51), EEPROM (0x54,0x55,0x56,0x57)
+
+I2C switch -
+/dev/i2c3 - CH0 - SO-DIMMs SPD (0x51, 0x53), 2Kb EEPROM (0x57), bootable 512Kb eeprom (0x50)
+/dev/i2c4 - CH1 - 100MHz clk gen (address 0x6a)
+/dev/i2c5 - CH2 - LTC3882 DC-DC controller on 0x63
+/dev/i2c6 - CH3 - SA56004ED (0x4c), SA56004FD (0x4d), COM module SMB_CK,SMB_DAT and COM module 10G_LED_SDA,10G_LED_SCL
+/dev/i2c7 - CH4 - SFP #0 I2C
+/dev/i2c8 - CH5 - SFP #1 I2C
+/dev/i2c9 - CH6 - SFP #2 I2C
+/dev/i2c10 - CH7 - SFP #3 I2C
+
+
+*/
+
+
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ fan-temperature-ctrlr@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ cooling-min-state = <0>;
+ cooling-max-state = <9>;
+ #cooling-cells = <2>;
+ };
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ temperature-sensor@48 {
+ compatible = "nxp,sa56004";
+ reg = <0x48>;
+ vcc-supply = <&sb_3v3>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ // IRQ10_B
+ interrupts = <0 150 0x4>;
+ };
+};
+
+&fspi {
+ status = "okay";
+ flash0: mt35xu512aba@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,m25p80";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+ spi-rx-bus-width = <8>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&emdio1 {
+ status = "okay";
+ rgmii_phy1: ethernet-phy@1 {
+ /* AR8035 PHY - "compatible" property not strictly needed */
+ compatible = "ethernet-phy-id004d.d072";
+ reg = <0x1>;
+ /* Poll mode - no "interrupts" property defined */
+ };
+};
+
+&emdio2 {
+ status = "okay";
+};
+
+&dpmac17 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-id";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
--
2.17.1
patches/linux/0003-arm64-dts-lx2160a-misc-fixes.patch 0 → 100644
View file @ 10c5ead0
From 1107c2ef83700a58ba086376123cc4c4f2a17645 Mon Sep 17 00:00:00 2001
From: Rabeeh Khoury <rabeeh@solid-run.com>
Date: Sun, 28 Jul 2019 14:25:43 +0300
Subject: [PATCH 3/3] arm64: dts: lx2160a: misc fixes
those are misc fixes that will be removed in some point.
the first is build amc6821 support
the second is setting default amc6821 default poalirty to be active
high; this modification will not be needed in REV 1.4 of the COM express
module since the inversion will be on the module.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
---
arch/arm64/configs/lsdk.config | 11 +++++++++++
drivers/hwmon/amc6821.c | 2 +-
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/configs/lsdk.config b/arch/arm64/configs/lsdk.config
index 7f0618f99e21..1bccccf5d502 100644
--- a/arch/arm64/configs/lsdk.config
+++ b/arch/arm64/configs/lsdk.config
@@ -106,3 +106,14 @@ CONFIG_CGROUP_FREEZER=y
# docker
CONFIG_OVERLAY_FS=y
+
+# fan controller and temperature
+CONFIG_SENSORS_AMC6821=y
+
+# GPIO sysfs
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_SENSORS_LM90=y
+
+# PKTGEN
+CONFIG_NET_PKTGEN=y
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 46b4e35fd555..7d884a610078 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -43,7 +43,7 @@ static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e,
* Insmod parameters
*/
-static int pwminv; /*Inverted PWM output. */
+static int pwminv = 1; /*Inverted PWM output. */
module_param(pwminv, int, S_IRUGO);
static int init = 1; /*Power-on initialization.*/
--
2.17.1
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7