{
  "type": "object",
  "$schema": "http://json-schema.org/draft-04/schema",
  "title": "Input Parameters",
  "properties": {
{%- if rf_mode == 'fdd' %}
    "rrh": {
      "title": "RRH",
      "description": "RRH",
      "type": "string",
      "default": "ORS",
      "enum": [
        "ORS",
        "Lopcomm ORAN"
      ]
    },
    "cpri_mult": {
      "title": "cpri_mult",
      "description": "Select the CPRI line bit rate in terms of multiple of option 1 (614.4 Mbps). E.g set 4 for option 3, 8 for option 5 and 16 for option 7.",
      "type": "number",
      "default": 16
    },
    "cpri_rx_delay": {
      "title": "cpri_rx_delay",
      "description": "Delay between TX and RX position in CPRI frame. This should be set to the value of (T2a + T3a - Toffset) provided by the RRH specification.",
      "type": "number",
      "default": 0
    },
    "cpri_tx_delay": {
      "title": "cpri_tx_delay",
      "description": "Advance Start of Frame relative to PPS to compensate for delays in transmit line and RRH. This should be set to T12 + T2a.",
      "type": "number",
      "default": 0
    },
    "cpri_tx_dbm": {
      "title": "cpri_tx_dbm",
      "description": "Optional floating point value in dBm (default 0). Needed by ENB/GNB to have a notion of actual output power. Computed from maximum power output of the RRH for a 0dBFS input signal (full scale). ",
      "type": "number",
      "default": 0
    },
    "dnsmasq": {
      "default": false,
      "title": "dnsmasq",
      "description": "dnsmasq",
      "type": "boolean"
    },
    "rrh_mac_addr": {
      "default": "00:0a:00:00:10:20",
      "title": "RRH MAC address",
      "description": "RRH MAC address used for DNSMASQ",
      "type": "string"
    },
    "txa0cc00_active": {
      "title": "Lopcomm ORAN TX array carriers (TXA0CC00)",
      "description": "Activate or inactivate Lopcomm ORAN TX array carriers (TXA0CC00)",
      "type": "string",
      "default": "INACTIVE",
      "enum": [
        "ACTIVE",
        "INACTIVE"
      ]
    },
    "rxa0cc00_active": {
      "title": "Lopcomm ORAN RX array carriers (RXA0CC00)",
      "description": "Activate or inactivate Lopcomm ORAN RX array carriers (RXA0CC00)",
      "type": "string",
      "default": "INACTIVE",
      "enum": [
        "ACTIVE",
        "INACTIVE"
      ]
    },
    "txa0cc00_center_frequency_earfcn": {
      "title": "Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
      "description": "Lopcomm ORAN Center Frequency EARFCN (TXA0CC00)",
      "type": "number",
      "default": 300
    },
    "txa0cc00_center_frequency": {
      "title": "Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
      "description": "Lopcomm ORAN Center Frequency in Hz (TXA0CC00)",
      "type": "number",
      "default": 2140000000
    },
    "txa0cc00_bandwidth": {
      "title": "Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
      "description": "Lopcomm ORAN bandwidth in Hz (TXA0CC00)",
      "type": "number",
      "default": 20000000
    },
    "rxa0cc00_center_frequency_earfcn": {
      "title": "Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
      "description": "Lopcomm ORAN Center Frequency EARFCN (RXA0CC00)",
      "type": "number",
      "default": 18300
    },
    "rxa0cc00_center_frequency": {
      "title": "Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
      "description": "Lopcomm ORAN Center Frequency in Hz (RXA0CC00)",
      "type": "number",
      "default": 1950000000
    },
    "rxa0cc00_bandwidth": {
      "title": "Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
      "description": "Lopcomm ORAN bandwidth in Hz (RXA0CC00)",
      "type": "number",
      "default": 20000000
    },
{%- endif %}
    "log_phy_debug": {
      "title": "Physical layer log debug",
      "description": "Enable debug mode for physical layer logs",
      "type": "boolean",
      "default": false
    },
    "tx_gain": {
      "title": "Tx gain",
      "description": "Tx gain (in dB)",
      "type": "number"
    },
    "rx_gain": {
      "title": "Rx gain",
      "description": "Rx gain (in dB)",
      "type": "number"
    },
    "gps_sync": {
      "default": false,
      "title": "GPS synchronisation",
      "description": "True if GPS should be used for synchronisation",
      "type": "boolean"
    },
    "n_antenna_dl": {
      "title": "Number of DL antennas",
      "description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
      "type": "number",
      "default": {{ default_n_antenna_dl }}
    },
    "n_antenna_ul": {
      "title": "Number of UL antennas",
      "description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
      "type": "number",
      "default": {{ default_n_antenna_ul }}
    },
    "dl_earfcn": {
      "title": "DL EARFCN",
      "description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
      "type": "number"
    },
    "n_rb_dl": {
      "title": "DL RB",
      "description": "number of DL resource blocks",
      "type": "number",
      "default": {{ default_lte_n_rb_dl }}
    },
    "mme_list": {
      "title": "MME list",
      "description": "Optionnal. List of MME to which the gNodeB is connected",
      "patternProperties": {
        ".*": {
          "properties": {
            "mme_addr": {
              "title": "MME Address",
              "description": "IP address (and optional port) of S1AP SCTP connection to the MME. The default port is 36412.",
              "type": "string"
            }
          },
          "type": "object"
        }
      },
      "type": "object",
      "default": {}
    },
    "enb_id": {
      "title": "eNB ID",
      "description": "eNB ID",
      "type": "string",
      "default": "0x1A2D0"
    },
    "pci": {
      "title": "Physical Cell ID",
      "description": "Physical Cell ID",
      "type": "number",
      "default": 1
    },
    "tac": {
      "title": "Tracking Area Code",
      "description": "Tracking Area Code in hexadecimal representation (range 0x0000 to 0xffff)",
      "default": "0x0001",
      "type": "string"
    },
    "plmn_list": {
      "title": "PLMN list",
      "description": "List of PLMNs broadcasted by the eNodeB, at most 6 (default: 00101)",
      "patternProperties": {
        ".*": {
          "properties": {
            "plmn": {
              "default": "00101",
              "title": "Public Land Mobile Network",
              "description": "Public Land Mobile Network",
              "type": "string"
            },
            "attach_without_pdn": {
              "default": false,
              "title": "Attach Without PDN",
              "description": "Optional boolean. Indicates if PLMN supports attach without PDN connectivity.",
              "type": "boolean"
            },
            "reserved": {
              "default": false,
              "title": "Reserved",
              "description": "True if the cell is reserved for operator use.",
              "type": "boolean"
            }
          },
          "type": "object"
        }
      },
      "type": "object",
      "default": {}
    },
    "inactivity_timer": {
      "title": "Inactivity Timer",
      "description": "Send RRC connection release after this time (in ms) of network inactivity.",
      "type": "number",
      "default": {{ default_lte_inactivity_timer }}
    },
    "tdd_ul_dl_config": {
      "title": "TDD",
      "description": "TDD",
      "type": "string",
      "enum": [
        "[Configuration 2] 5ms 2UL 6DL (default)",
        "[Configuration 6] 5ms 5UL 3DL (maximum uplink)"
      ],
      "default": "5ms 2UL 7DL 4/6 (default)"
    },
    "disable_sdr": {
      "default": false,
      "title": "Disable SDR",
      "description": "Disables radio",
      "type": "boolean"
    },
    "use_ipv4": {
      "default": false,
      "title": "Use IPv4",
      "description": "Set to true to use IPv4 for AMF / MME addresses",
      "type": "boolean"
    },
    "enb_stats_fetch_period": {
      "title": "eNB statistics fetch period (seconds)",
      "description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics",
      "type": "number",
      "default": 60
    },
    "enb_drb_stats_enabled": {
      "title": "Enable eNB drb statistics",
      "description": "Enable eNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
      "type": "boolean",
      "default": true
    },
    "max_rx_sample_db": {
      "title": "Maximum RX sample value (dB)",
      "description": "Maximum RX sample threshold above which RX saturated promise will fail",
      "type": "number",
      "default": 0
    },
    "min_txrx_delay": {
      "title": "Minimum available time for radio front end processing (ms)",
      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
      "type": "number",
      "default": 5
    },
    "avg_txrx_delay": {
      "title": "Average available time for radio front end processing (ms)",
      "description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
      "type": "number",
      "default": 7
    },
    "xlog_fluentbit_forward_host": {
      "title": "Address to Forward Xlog by Fluenbit",
      "description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
      "type": "string"
    },
    "xlog_fluentbit_forward_port": {
      "title": "Port to Forward Xlog by Fluentbit",
      "description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
      "type": "string"
    },
    "xlog_fluentbit_forward_shared_key": {
      "title": "Shared Key to Forward Xlog by Fluentbit",
      "description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
      "type": "string"
    }
  }
}
