OpPlace object changed, User and RttConfig obsolete

src/wbl/pwrb/src/pwrb_c_opplace.wb_load

 ! 
-!  Proview   $Id: pwrb_c_opplace.wb_load,v 1.7 2006-03-31 14:47:15 claes Exp $
+!  Proview   $Id$
 !  Copyright (C) 2005 SSAB Oxelösund AB.
 !
 !  This program is free software; you can redistribute it and/or 
@@ -20,7 +20,7 @@
 !
 SObject pwrb:Class
 !/**
-!  @Version 1.0
+!  @Version 2.0
 !  @Group Operator,NodeConfiguration
 !  @Summary Configures a logical operator station for operator
 !  Configures a logical operator station for operator
@@ -33,42 +33,7 @@ SObject pwrb:Class
 !  Node Configuration.
 !  
 !  There may be one or more OpPlace objects below a $Node
-!  object. This will be the case when the node consists of
-!  both a work station and an X-terminal; see figure 3-32
-!  on p. 3-238.
-!  There may exist one and only one user category, i.e.
-!  only one User object (see p. 3-368), for every OpPlace
-!  object. If an operator station has to be configured for
-!  different user categories there is a need for one
-!  OpPlace object per category.
-!  
-!  When an event-message, which demand an acknowledgement,
-!  arrives the acoustic signal is activated according to
-!  BellVolume and BellDelay.
-!  In two different situations it is possible to avoid
-!  continually activating the acoustic signal:
-!  
-!  1 At 'alarm streams' this may be done by demanding a
-!    certain time between acknowledgement ( of acoustic
-!    signal or event ) until an arriving event that
-!    demands acknowledgement once again is allowed to
-!    activate the acoustic signal in the normal way. This
-!    blocking time is specified by means of
-!    TimeBeforeNextBell.
-!
-!  2 Reminder of any unacknowledged event. To remind the
-!    operator, after an acknowledgement of acoustic
-!    signal or after an alarm acknowledgement,   about
-!    remaining unacknowledged events a short acoustic
-!    signal sounds with the period of ReactivateBellTime.
-!    After a certain number of such periods 
-!    (ReactivateBellCount specifies the numbers) the
-!    reminder time has  expired and the acoustic signal
-!    is activated in the normal way again. If there is no
-!    unacknowledged event at present and
-!    TimeBeforeNextBell > 0 then an arriving event that
-!    demands acknowledgement first will be announced by
-!    the reminder function.
+!  object. 
 !*/
   Object OpPlace $ClassDef 164 
     Body SysBody
@@ -88,18 +53,31 @@ SObject pwrb:Class
         EndBody
       EndObject
       !/**
-      !  The logical operator stations are numbered in a unique
-      !  way within each node in the PROVIEW/R system. Sometimes
-      !  one numbering is done all over the nodes in PROVIEW/R
-      !  system; e.g. 1, 2, ....
-      !  OpNumber is also an attribute in User object. A
-      !  specific OpPlace object and a specific User object is
-      !  connected to each other by specifying the same value to
-      !  OpNumber in both objects.
+      !  Proview user. The user with the specified username is fetched from the
+      !  user database and determines the privileges for the operator.
+      !
+      !  If no value is assigned, or if the username is invalid, the loginframe is
+      !  displayed, where the operator can login with username and password.
+      !
+      !  Note! If XttUseOpsysUser is set in the Security object, this value is
+      !  overrided, and the username is fetched from the current operator system user.
+      !
+      !  The UserName is a constant value and can not be changed in runtime.	
       !*/
-      Object OpNumber $Attribute 2 
+      Object UserName $Attribute 28 
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Int32"
+          Attr TypeRef = "pwrs:Type-$String32"
+	  Attr Flags |= PWR_MASK_CONST
+        EndBody
+      EndObject
+      !/**
+      !  Only if the user has logged in to the operator system
+      !  as this user he has authority to start this operator place.
+      !*/
+      Object DedicatedOpsysUser $Attribute 29 
+        Body SysBody
+          Attr TypeRef = "pwrs:Type-$String32"
+	  Attr Flags |= PWR_MASK_CONST
         EndBody
       EndObject
       !/**
@@ -113,353 +91,173 @@ SObject pwrb:Class
       Object Display $Attribute 3
         Body SysBody
           Attr TypeRef = "pwrs:Type-$String80"
+	  Attr Flags |= PWR_MASK_CONST
         EndBody
       EndObject
       !/**
-      !  When there is application-written code behind any
-      !  GMS-graphic the actual files are linked together in an
-      !  exe-file whose directory and filename is specified
-      !  here.
-      !  
-      !  The attribute is left blank if there is only codeless
-      !  GMS-graphics for the logical operator station. In such
-      !  cases pwr_exe:ps-cont.exe will execute to handle
-      !  Operator Window, forms, and GMS-graphics.
+      !  Specifies language.
       !*/
-      Object OpWinProgram $Attribute 4 
+      Object Language $Attribute 30
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$String80"
+          Attr TypeRef = "pwrb:Type-LanguageEnum"
         EndBody
       EndObject
       !/**
-      !  Specifies the logical name, e.g. pwr_lang: , on the
-      !  path to the PROVIEW/R distribution's *.frm, *.m1 etc
-      !  files;.
-      !  
-      !  The most effective handling is set up by the following
-      !  steps:
-      !  1  Put FilePath[0] to ' pwr_lang:' and leave the other
-      !  FilePath attributes blank. ( 'lang' in pwr_lang
-      !  comes from language)
-      !  2 Put the path 'pwrp_exe' of the project's *.frm, *.m1
-      !  etc files by the command
-      !  
-      !        $ set default pwrp_exe
-      !  3 Activate the operator communication by the command:
-      !  
-      !         $  pwr_pop <name of actual OpPlace object>
-      !  
-      !  FilePath[1] specifies another path to *.frm, *.m1, .... files.
-      !  
-      !  If the method described below FilePath[0] is not used
-      !  the logical name of the path of the project's *.frm,
-      !  *.m1, .... has to be specified here, i.e. pwrp_exe:
-      !  
-      !  FilePath[2],FilePath[3] specifies further paths to look for files. If there is
-      !  none, leave the attributes blank.
+      !  Start java process.
       !*/
-      Object FilePath $Attribute 5 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$String80"
-          Attr Flags |= PWR_MASK_ARRAY
-	  Attr Elements = 4
-        EndBody
-      EndObject
-      !/**
-      !  Specifies if the process that handles the presentation
-      !  of alarm list, event list, blocked alarm list and alarm
-      !  limits is to be included in the operator dialogue or
-      !  not. FALSE means that no presentation is to be included
-      !  in the operator dialogue and TRUE that it is to be
-      !  included.
-      !  
-      !  The attribute has no influence on the alarm
-      !  supervision.
-      !  When the alarm presentation is included in the operator
-      !  dialogue the presentation may be displayed on a
-      !  separate monitor if AlarmDisplay is defined, otherwise
-      !  on the same monitor as the rest of the operator
-      !  dialogue.
-      !*/
-      Object AlarmProcess $Attribute 6 
+      Object StartJavaProcess $Attribute 31
         Body SysBody
           Attr TypeRef = "pwrs:Type-$Boolean"
         EndBody
       EndObject
       !/**
-      !  The attribute is used to define a separate monitor for
-      !  presentation of the alarm handling when AlarmProcess is
-      !  TRUE. The syntax is the same as for Display, se above.
+      !  Each attribute specifies the complete name of a Form or
+      !  Graph object which is to be activated by a function
+      !  button in the operator window. The name has to be
+      !  filled on in a consecutive way with the beginning of
+      !  FastAvail[0], representing the first function button in
+      !  the first row.
       !*/
-      Object AlarmDisplay $Attribute 7 
+      Object FastAvail $Attribute 32
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$String80"
+          Attr TypeRef = "pwrs:Type-$AttrRef"
+          Attr Flags |= PWR_MASK_ARRAY
+	  Attr Elements = 25
         EndBody
       EndObject
       !/**
-      !  Specifies if there will be a button in the Operator
-      !  Window to activate the Runtime Navigator or not. FALSE
-      !  means that the Operator Window has no button to
-      !  activate the Runtime Navigator and TRUE that the button
-      !  exist.
+      !  Specifies if the alarmlist should be placed
+      !  on top of the screen when an alarm arrives.
       !*/
-      Object Navigator $Attribute 8 
+      Object OpWindPop $Attribute 33
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Boolean"
-        EndBody
-      EndObject
-      Object HistEvent $Attribute 9 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$Boolean"
+          Attr TypeRef = "pwrb:Type-OpWindPopMask"
         EndBody
       EndObject
       !/**
-      !  Specifies if there will be a button in the Operator
-      !  Window to activate the historical trend graphs or not.
-      !  FALSE means that the Operator Window has no button to
-      !  activate the historical trend graphs and TRUE that the
-      !  button exist.
+      !  Specifies the layout of the operator window.
       !*/
-      Object HistTrend $Attribute 10 
+      Object OpWindLayout $Attribute 34
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Boolean"
+          Attr TypeRef = "pwrb:Type-OpWindLayoutMask"
         EndBody
       EndObject
       !/**
-      !  Specifies if the alternative 'Exit Operator' will be
-      !  visible in the Window Manager menu of the Operator
-      !  Window or not. By choosing 'Exit Operator' it is
-      !  possible to exit the operator environment.
-      !  
-      !  FALSE means that the alternative 'Exit Operator' will
-      !  be unvisible in Window Manager menu and TRUE that it is
-      !  made visible.
+      !  The bell is activated when unacknowledged alarms are present.
       !*/
-      Object ExitButton $Attribute 11 
+      Object AlarmBell $Attribute 35
         Body SysBody
           Attr TypeRef = "pwrs:Type-$Boolean"
         EndBody
       EndObject
       !/**
-      !  The strength of the beep on the operator station is
-      !  specified in the range 0 - 10, where 0 switches the
-      !  beep off.
-      !  
-      !  The acoustic signal (the beep) is used, for instance,
-      !  to pay attention to receiving of alarms.
-      !*/
-      Object BellVolume $Attribute 12 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$UInt8"
-        EndBody
-      EndObject
-      !/**
       !  Specifies, in milliseconds, the delay between two
       !  consecutive beeps, two acoustic signals.
       !*/
-      Object BellDelay $Attribute 13 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$Float32"
-        EndBody
-      EndObject
-      !/**
-      !  The blocking time, the time when the normal acoustic
-      !  signal is disabled, is counted from the latest
-      !  acknowledgement ( of acoustic signal or event ) and has
-      !  the duration TimeBeforeNextBell. The unit is in tens of
-      !  seconds. During this time no arriving event that
-      !  demands acknowledgement may activate the acoustic
-      !  signal the normal way.
-      !*/
-      Object TimeBeforeNextBell $Attribute 14 
+      Object BellDelay $Attribute 36
         Body SysBody
           Attr TypeRef = "pwrs:Type-$Float32"
         EndBody
       EndObject
       !/**
-      !  Reminder of any unacknowledged event during the
-      !  reminder time.
-      !  This acoustic signal, which is much shorter then the
-      !  normal signal, will be reactivated with the period
-      !  ReactivateBellTime when,
-      !  
-      !  · any unacknowledged event exist
-      !  · there is no unacknowledged event at present and
-      !  TimeBeforeNextBell > 0 but an event that demands
-      !  acknowledgement arrives
-      !  
-      !  The reminder time is as longest ReactivateBellTime *
-      !  ReactivateBellCount and is counted from the moment when
-      !  the acoustic signal is acknowledged or alarm
-      !  acknowledgement is done. If TimeBeforeNextBell = 0 the
-      !  reminder function is discontinued directly as soon as
-      !  an event that demand acknowledgement arrives.
-      !  
-      !  ReactivateBellTime is specified in tens of seconds.
+      !  Attach audio hardware.
       !*/
-      Object ReactivateBellTime $Attribute 15 
+      Object AttachAudio $Attribute 37
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Float32"
-        EndBody
-      EndObject
-      !/**
-      !  The duration of the reminder time is determined by
-      !  ReactivateBellTime ReactivateBellCount. During this
-      !  time sounds maximally ReactivateBellCount short
-      !  acoustic signals
-      !*/
-      Object ReactivateBellCount $Attribute 16 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$UInt16"
-        EndBody
-      EndObject
-      !/**
-      !  Messages from message handlers are sent to out units in
-      !  the PROVIEW/R system. Each out unit receives this
-      !  messages in a queue according to its Select-attributes.
-      !  
-      !  The operator dialogue is an out unit represented by a
-      !  User object.
-      !  MhScanInterval specifies, in tens of seconds, how often
-      !  this message queue is emptied.
-      !*/
-      Object MhScanInterval $Attribute 17 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$Float32"
-        EndBody
-      EndObject      
-      !/**
-      !  Specifies, in tens of seconds, the updating period for
-      !  all subscriptions to none-local objects made by the
-      !  operator dialogue.
-      !  It is suitable to specify the period of subscription in
-      !  a way that will match UpdateInterval in Graph objects
-      !  etc. Times less then one second is not recommended.
-      !*/
-      Object SubscriptionInterval $Attribute 18 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$Float32"
-        EndBody
-      EndObject
-      Object GraphicsUpdateInterval $Attribute 19 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$Float32"
-        EndBody
-      EndObject
-      !/**
-      !  Specifies the name of the printer queue used to
-      !  ANSI-files, e.g. event list, blocked alarm list and
-      !  alarm statistics. Qualifiers of Print command may be
-      !  used.
-      !  Example: LPS17_ANSI/notify/del
-      !*/
-      Object ANSIQueue $Attribute 20 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$String80"
-        EndBody
-      EndObject
-      !/**
-      !  Specifies the name of the PostScript printer queue used
-      !  to print process graphics etc. The Print command
-      !  qualifiers may be used.
-      !  
-      !  Example:. LPS17_PS/notify/del
-      !*/
-      Object PostScriptQueue $Attribute 21 
-        Body SysBody
-          Attr TypeRef = "pwrs:Type-$String80"
+          Attr TypeRef = "pwrs:Type-$Boolean"
         EndBody
       EndObject
       !/**
-      !  The value of the attribute follows the acoustic signal.
-      !  By supervise the condition of the attribute, from a PLC
-      !  program for instance, it is possible to use the
-      !  acoustic signal to handle more activities.
-      !  
-      !  The attribute is FALSE when the acoustic signal is off
-      !  and TRUE when the signal is on.
+      !  Specifies the maximum number of contemporary alarms in
+      !  the user's alarm list.
+      !  The number should exceed the maximum number of 
+      !  concurrent alarms in the system.
+      !  If the limit is exceeded, alarms might be lost.
       !*/
-      Object IsBellOn $Attribute 22 
+      Object MaxNoOfAlarms $Attribute 38
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Boolean"
-          Attr Flags |= PWR_MASK_INVISIBLE
+          Attr TypeRef = "pwrs:Type-$UInt32"
         EndBody
       EndObject
       !/**
-      !  Specifies if there is any current unacknowledged
-      !  A-alarm or not. FALSE means no unacknowledged A-alarm
-      !  and TRUE indicates current, existing or none-existing,
-      !  unacknowledged A-alarm.
+      !  Specifies the maximum number of contemporary events in
+      !  the user's event list, i.e. the skyline of the events.
+      !  When the number of events exceeds MaxNoOfEvents the
+      !  oldest event disappears from the list.
+      !  To this list events are sent from the message handler
+      !  in respective node. In each node the message handler
+      !  has its own skyline of events (also named MaxNoOfEvents)
+      !  defined by a MessageHandler object. In principle, the
+      !  User object's skyline of events should be selected as å
+      !  MaxNoOfEvents, added up over MaxNoOfEvents in the
+      !  MessageHandler objects in all nodes throughout the
+      !  PROVIEW/R system, or make it simple and assign the
+      !  attribute e.g. 200.
       !*/
-      Object UnackedAAlarm $Attribute 23 
+      Object MaxNoOfEvents $Attribute 39
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Boolean"
-          Attr Flags |= PWR_MASK_INVISIBLE
+          Attr TypeRef = "pwrs:Type-$UInt32"
+          Attr Flags = 0
         EndBody
       EndObject
       !/**
-      !  Specifies if there is any current unacknowledged
-      !  B-alarm or not. FALSE means no unacknowledged B-alarm
-      !  and TRUE indicates current, existing or none-existing,
-      !  unacknowledged B-alarm.
+      !  If the selectlist is modified, this attribute has to be set to notify the
+      !  modification.
       !*/
-      Object UnackedBAlarm $Attribute 24 
+      Object SelectListIsUpdated $Attribute 40
         Body SysBody
           Attr TypeRef = "pwrs:Type-$Boolean"
+          Attr Flags |= PWR_MASK_STATE
 	  Attr Flags |= PWR_MASK_INVISIBLE
         EndBody
       EndObject
       !/**
-      !  Specifies if there is any current unacknowledged
-      !  C-alarm or not. FALSE means no unacknowledged C-alarm
-      !  and TRUE indicates current, existing or none-existing,
-      !  unacknowledged C-alarm.
+      !  A message created by an ASup or DSup object gets the
+      !  same identity as the supervised object. Messages
+      !  produced in an application by means of mh_ApplMessage
+      !  (see PROVIEW/R Programmer's Reference Manual) get an
+      !  identity according to the calling parameter EventName.
+      !  
+      !  SelectList specifies the hierarchies from which
+      !  messages are to be sent to the user. Up to 8 different
+      !  hierarchies can be specified. If messages from e.g. a
+      !  Watchdog object in a node will be received, then the
+      !  name of the node will be specified.
+      !  
+      !  Note! If the SelectList is left blank no message at all is
+      !  sent to the user.
       !*/
-      Object UnackedCAlarm $Attribute 25 
+      Object SelectList $Attribute 41 
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Boolean"
-          Attr Flags |= PWR_MASK_INVISIBLE
+          Attr TypeRef = "pwrs:Type-$String80"
+          Attr Flags |= PWR_MASK_ARRAY
+	  Attr Elements = 20
         EndBody
       EndObject
       !/**
-      !  Specifies if there is any current unacknowledged
-      !  D-alarm or not. FALSE means no unacknowledged D-alarm
-      !  and TRUE indicates current, existing or none-existing,
-      !  unacknowledged D-alarm.
+      !  Specifies the type of events viewed in the eventlist.
       !*/
-      Object UnackedDAlarm $Attribute 26 
+      Object EventListEvents $Attribute 42 
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$Boolean"
-          Attr Flags |= PWR_MASK_INVISIBLE
+          Attr TypeRef = "pwrb:Type-EventListMask"
         EndBody
       EndObject
       !/**
-      !  Used by the Package Handler; see PROVIEW/R Programmer's
-      !  Reference Manual.
+      !  Setup script file.
+      !  The default script file is xtt_setup.rtt_com on the
+      !  login directory for the user. If another scriptfile
+      !  should be used, this file is specified here.
       !*/
-      Object Address $Attribute 27 
+      Object SetupScript $Attribute 43
         Body SysBody
-          Attr TypeRef = "pwrs:Type-$UInt32"
-          Attr Flags |= PWR_MASK_INVISIBLE
+          Attr TypeRef = "pwrs:Type-$String80"
         EndBody
       EndObject
     EndObject
     Object Template OpPlace
       Body RtBody
-        Attr FilePath[0] = "pwr_lang:"
-        Attr FilePath[1] = "pwrp_exe:"
-        Attr AlarmProcess = 1
-        Attr Navigator = 1
-        Attr HistEvent = 1
-        Attr ExitButton = 1
-        Attr BellVolume = 7
-        Attr BellDelay = 1.5
-	Attr TimeBeforeNextBell = 0
-	Attr ReactivateBellTime = 8.0
-	Attr ReactivateBellCount = 10
-	Attr MhScanInterval = 1.0
-	Attr SubscriptionInterval = 1.0
-        Attr GraphicsUpdateInterval = 0.25
+        Attr AlarmBell = 1
+        Attr BellDelay = 2
       EndBody
     EndObject
     Object PostCreate $DbCallBack
@@ -522,5 +320,314 @@ SObject pwrb:Class
 	EndObject
       EndObject
     EndObject
+    Object ConfiguratorPoson $Menu
+      Object Pointed $Menu
+	Object ConnectFastAvail $MenuCascade
+	  Body SysBody
+	    Attr ButtonName = "Connect FastAvail"
+	  EndBody
+	  Object Rowl $MenuCascade
+	    Body SysBody
+	      Attr ButtonName = "Row 1"
+	    EndBody
+	    Object Column1 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 1"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[0]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[0]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column2 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 2"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[1]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[1]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column3 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 3"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[2]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[2]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column4 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 4"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[3]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[3]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column5 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 5"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[4]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[4]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	  EndObject
+	  Object Row2 $MenuCascade
+	    Body SysBody
+	      Attr ButtonName = "Row 2"
+	    EndBody
+	    Object Column1 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 1"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[5]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[5]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column2 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 2"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[6]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[6]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column3 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 3"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[7]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[7]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column4 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 4"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[8]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[8]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column5 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 5"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[9]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[9]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	  EndObject
+	  Object Row3 $MenuCascade
+	    Body SysBody
+	      Attr ButtonName = "Row 3"
+	    EndBody
+	    Object Column1 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 1"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[10]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[10]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column2 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 2"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[11]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[11]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column3 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 3"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[12]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[12]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column4 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 4"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[13]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[13]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column5 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 5"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[14]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[14]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	  EndObject
+	  Object Row4 $MenuCascade
+	    Body SysBody
+	      Attr ButtonName = "Row 4"
+	    EndBody
+	    Object Column1 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 1"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[15]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[15]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column2 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 2"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[16]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[16]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column3 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 3"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[17]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[17]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column4 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 4"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[18]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[18]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column5 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 5"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[19]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[19]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	  EndObject
+	  Object Row5 $MenuCascade
+	    Body SysBody
+	      Attr ButtonName = "Row 5"
+	    EndBody
+	    Object Column1 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 1"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[20]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[20]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column2 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 2"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[21]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[21]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column3 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 3"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[22]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[22]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column4 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 4"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[23]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[23]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	    Object Column5 $MenuButton
+	      Body SysBody
+	        Attr ButtonName = "Column 5"
+	        Attr MethodName = "$Objid-Connect"
+	        Attr MethodArguments[0] = "FastAvail[24]"
+	        Attr MethodArguments[1] = "XttGraph"
+	        Attr FilterName = "$Objid-IsOkConnect"
+	        Attr FilterArguments[0] = "FastAvail[24]"
+	        Attr FilterArguments[1] = "XttGraph"
+	      EndBody
+	    EndObject
+	  EndObject
+        EndObject
+      EndObject
+    EndObject
   EndObject
 EndSObject

src/wbl/pwrb/src/pwrb_c_rttconfig.wb_load

@@ -23,6 +23,8 @@ SObject pwrb:Class
 !  @Version 1.0
 !  @Group Operator,NodeConfiguration
 !  @Summary Configuration of rtt and xtt.
+!  <h2>Obsolete from V4.7.0
+!
 !  Configuration of rtt and xtt.
 !*/
   Object RttConfig $ClassDef 276

src/wbl/pwrb/src/pwrb_c_user.wb_load

@@ -23,6 +23,8 @@ SObject pwrb:Class
 !  @Version 2.0
 !  @Group Operator,NodeConfiguration
 !  @Summary Configures a user category of an operator station
+!  <h2>Obsolete from V4.7.0
+!
 !  Configures a user category of an operator station.
 !  
 !  Configures a user category below the OpPlace

src/wbl/pwrb/src/pwrb_td_eventlistmask.wb_load

+! 
+!  Proview   $Id$
+!  Copyright (C) 2005 SSAB Oxelsund AB.
+!
+!  This program is free software; you can redistribute it and/or 
+!  modify it under the terms of the GNU General Public License as 
+!  published by the Free Software Foundation, either version 2 of 
+!  the License, or (at your option) any later version.
+!
+!  This program is distributed in the hope that it will be useful 
+!  but WITHOUT ANY WARRANTY; without even the implied warranty of 
+!  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
+!  GNU General Public License for more details.
+!
+!  You should have received a copy of the GNU General Public License 
+!  along with the program, if not, write to the Free Software 
+!  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+!
+!  pwrb_eventlistmask.wb_load -- Defines the mask type EventListMask
+!
+SObject pwrb:Type
+!/**
+!  @Version 1.0
+!  @Group Types
+!  Bitmask for events displayed in the eventlist.
+!
+! @b See also
+!  @classlink OpPlace pwrb_opplace.html
+!*/
+  Object EventListMask $TypeDef 52
+    Body SysBody
+      Attr Type = pwr_eType_Mask
+      Attr Size = 4
+      Attr TypeRef = "pwrs:Type-$Mask"
+      Attr Elements = 1
+    EndBody
+    !/**
+    !  Display alarm return events.
+    !*/
+    Object AlarmReturn $Bit
+     Body SysBody
+       Attr PgmName = "AlarmReturn"
+       Attr Text = "AlarmReturn"
+       Attr Value = 1
+     EndBody
+    EndObject
+    !/**
+    !  Display alarm acknowledge events.
+    !*/
+    Object AlarmAck $Bit
+     Body SysBody
+       Attr PgmName = "AlarmAck"
+       Attr Text = "AlarmAck"
+       Attr Value = 2
+     EndBody
+    EndObject
+  EndObject
+EndSObject
+
+
+
+

src/wbl/pwrb/src/pwrb_td_languageenum.wb_load

+! 
+!  Proview   $Id$
+!  Copyright (C) 2005 SSAB Oxelsund AB.
+!
+!  This program is free software; you can redistribute it and/or 
+!  modify it under the terms of the GNU General Public License as 
+!  published by the Free Software Foundation, either version 2 of 
+!  the License, or (at your option) any later version.
+!
+!  This program is distributed in the hope that it will be useful 
+!  but WITHOUT ANY WARRANTY; without even the implied warranty of 
+!  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
+!  GNU General Public License for more details.
+!
+!  You should have received a copy of the GNU General Public License 
+!  along with the program, if not, write to the Free Software 
+!  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+!
+!  pwrb_td_languageenum.wb_load -- Defines the enum type LanguageEnum
+!
+SObject pwrb:Type
+!/**
+!  @Version 1.0
+!  @Group Types
+!  Enumeration for language.
+!*/
+  Object LanguageEnum $TypeDef 51
+    Body SysBody
+      Attr TypeRef = "pwrs:Type-$Enum"
+      Attr PgmName = "LanguageEnum"
+    EndBody
+    !/**
+    !  English.
+    !*/
+    Object English $Value
+     Body SysBody
+       Attr PgmName = "English"
+       Attr Text = "English"
+       Attr Value = 0
+     EndBody
+    EndObject
+    !/**
+    !  Swedish.
+    !*/
+    Object Swedish $Value
+     Body SysBody
+       Attr PgmName = "Swedish"
+       Attr Text = "Swedish"
+       Attr Value = 1
+     EndBody
+    EndObject
+    !/**
+    !  German.
+    !*/
+    Object German $Value
+     Body SysBody
+       Attr PgmName = "German"
+       Attr Text = "German"
+       Attr Value = 2
+     EndBody
+    EndObject
+    !/**
+    !  French.
+    !*/
+    Object French $Value
+     Body SysBody
+       Attr PgmName = "French"
+       Attr Text = "French"
+       Attr Value = 3
+     EndBody
+    EndObject
+  EndObject
+EndSObject
+
+
+
+
+
+
+
+

src/wbl/pwrb/src/pwrb_td_onoffenum.wb_load

+! 
+!  Proview   $Id$
+!  Copyright (C) 2005 SSAB Oxelsund AB.
+!
+!  This program is free software; you can redistribute it and/or 
+!  modify it under the terms of the GNU General Public License as 
+!  published by the Free Software Foundation, either version 2 of 
+!  the License, or (at your option) any later version.
+!
+!  This program is distributed in the hope that it will be useful 
+!  but WITHOUT ANY WARRANTY; without even the implied warranty of 
+!  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
+!  GNU General Public License for more details.
+!
+!  You should have received a copy of the GNU General Public License 
+!  along with the program, if not, write to the Free Software 
+!  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+!
+!  pwrb_td_onoffenum.wb_load -- Defines the enum type OnOff
+!
+SObject pwrb:Type
+!/**
+!  @Version 1.0
+!  @Group Types
+!  Enumeration for on/off.
+!*/
+  Object OnOffEnum $TypeDef 48
+    Body SysBody
+      Attr TypeRef = "pwrs:Type-$Enum"
+      Attr PgmName = "OnOffEnum"
+    EndBody
+    !/**
+    !  Off.
+    !*/
+    Object Off $Value
+     Body SysBody
+       Attr PgmName = "Off"
+       Attr Text = "Off"
+       Attr Value = 0
+     EndBody
+    EndObject
+    !/**
+    !  On.
+    !*/
+    Object On $Value
+     Body SysBody
+       Attr PgmName = "On"
+       Attr Text = "On"
+       Attr Value = 1
+     EndBody
+    EndObject
+  EndObject
+EndSObject
+
+
+
+
+
+
+
+

src/wbl/pwrb/src/pwrb_td_opwindlayoutmask.wb_load

+! 
+!  Proview   $Id$
+!  Copyright (C) 2005 SSAB Oxelsund AB.
+!
+!  This program is free software; you can redistribute it and/or 
+!  modify it under the terms of the GNU General Public License as 
+!  published by the Free Software Foundation, either version 2 of 
+!  the License, or (at your option) any later version.
+!
+!  This program is distributed in the hope that it will be useful 
+!  but WITHOUT ANY WARRANTY; without even the implied warranty of 
+!  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
+!  GNU General Public License for more details.
+!
+!  You should have received a copy of the GNU General Public License 
+!  along with the program, if not, write to the Free Software 
+!  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+!
+!  pwrb_opwindlayoutmask.wb_load -- Defines the mask type OpWindLayoutMask
+!
+SObject pwrb:Type
+!/**
+!  @Version 1.0
+!  @Group Types
+!  Bitmask for layout of operator window.
+!
+! @b See also
+!  @classlink OpPlace pwrb_opplace.html
+!*/
+  Object OpWindLayoutMask $TypeDef 50
+    Body SysBody
+      Attr Type = pwr_eType_Mask
+      Attr Size = 4
+      Attr TypeRef = "pwrs:Type-$Mask"
+      Attr Elements = 1
+    EndBody
+    !/**
+    !  Hide Operator Window.
+    !*/
+    Object HideOperatorWindow $Bit
+     Body SysBody
+       Attr PgmName = "HideOperatorWindow"
+       Attr Text = "HideOperatorWindow"
+       Attr Value = 1
+     EndBody
+    EndObject
+    !/**
+    !  Hide Licence Window.
+    !*/
+    Object HideLicenceWindow $Bit
+     Body SysBody
+       Attr PgmName = "HideLicenceWindow"
+       Attr Text = "HideLicenceWindow"
+       Attr Value = 2
+     EndBody
+    EndObject
+    !/**
+    !  Hide Status bar.
+    !*/
+    Object HideStatusBar $Bit
+     Body SysBody
+       Attr PgmName = "HideStatusBar"
+       Attr Text = "HideStatusBar"
+       Attr Value = 4
+     EndBody
+    EndObject
+    !/**
+    !  Close button.
+    !*/
+    Object HideCloseButton $Bit
+     Body SysBody
+       Attr PgmName = "HideCloseButton"
+       Attr Text = "HideCloseButton"
+       Attr Value = 8
+     EndBody
+    EndObject
+  EndObject
+EndSObject
+
+
+
+

src/wbl/pwrb/src/pwrb_td_opwindpopmask.wb_load

+! 
+!  Proview   $Id$
+!  Copyright (C) 2005 SSAB Oxelsund AB.
+!
+!  This program is free software; you can redistribute it and/or 
+!  modify it under the terms of the GNU General Public License as 
+!  published by the Free Software Foundation, either version 2 of 
+!  the License, or (at your option) any later version.
+!
+!  This program is distributed in the hope that it will be useful 
+!  but WITHOUT ANY WARRANTY; without even the implied warranty of 
+!  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
+!  GNU General Public License for more details.
+!
+!  You should have received a copy of the GNU General Public License 
+!  along with the program, if not, write to the Free Software 
+!  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+!
+!  pwrb_opwindpopmask.wb_load -- Defines the mask type OpWindPopMask
+!
+SObject pwrb:Type
+!/**
+!  @Version 1.0
+!  @Group Types
+!  Bitmask for pop of operator window.
+!
+! @b See also
+!  @classlink OpPlace pwrb_opplace.html
+!*/
+  Object OpWindPopMask $TypeDef 49
+    Body SysBody
+      Attr Type = pwr_eType_Mask
+      Attr Size = 4
+      Attr TypeRef = "pwrs:Type-$Mask"
+      Attr Elements = 1
+    EndBody
+    !/**
+    !  Pop for A alarms.
+    !*/
+    Object Aalarm $Bit
+     Body SysBody
+       Attr PgmName = "Aalarm"
+       Attr Text = "Aalarm"
+       Attr Value = 1
+     EndBody
+    EndObject
+    !/**
+    !  Pop for B alarms.
+    !*/
+    Object Balarm $Bit
+     Body SysBody
+       Attr PgmName = "Balarm"
+       Attr Text = "Balarm"
+       Attr Value = 2
+     EndBody
+    EndObject
+    !/**
+    !  Pop for C alarms.
+    !*/
+    Object Calarm $Bit
+     Body SysBody
+       Attr PgmName = "Calarm"
+       Attr Text = "Calarm"
+       Attr Value = 4
+     EndBody
+    EndObject
+    !/**
+    !  Pop for D larms.
+    !*/
+    Object Dalarm $Bit
+     Body SysBody
+       Attr PgmName = "Dalarm"
+       Attr Text = "Dalarm"
+       Attr Value = 8
+     EndBody
+    EndObject
+    !/**
+    !  Pop for InfoMsg larms.
+    !*/
+    Object InfoMsg $Bit
+     Body SysBody
+       Attr PgmName = "InfoMsg"
+       Attr Text = "InfoMsg"
+       Attr Value = 16
+     EndBody
+    EndObject
+  EndObject
+EndSObject
+
+
+
+

src/wbl/pwrb/src/pwrb_td_truefalseenum.wb_load

@@ -22,7 +22,7 @@ SObject pwrb:Type
 !/**
 !  @Version 1.0
 !  @Group Types
-!  Enumeration for yes no.
+!  Enumeration for true/false.
 !*/
   Object TrueFalseEnum $TypeDef 45
     Body SysBody

src/wbl/pwrb/src/pwrb_td_yesnoenum.wb_load

@@ -22,7 +22,7 @@ SObject pwrb:Type
 !/**
 !  @Version 1.0
 !  @Group Types
-!  Enumeration for yes no.
+!  Enumeration for yes/no.
 !*/
   Object YesNoEnum $TypeDef 44
     Body SysBody