add include/linux/hdlc/ioctl.h

Need to add include/linux/hdlc/ioctl.h because it is not present
in older releases.
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>

include/linux/hdlc/ioctl.h

+#ifndef __HDLC_IOCTL_H__
+#define __HDLC_IOCTL_H__
+
+
+#define GENERIC_HDLC_VERSION 4	/* For synchronization with sethdlc utility */
+
+#define CLOCK_DEFAULT   0	/* Default setting */
+#define CLOCK_EXT	1	/* External TX and RX clock - DTE */
+#define CLOCK_INT	2	/* Internal TX and RX clock - DCE */
+#define CLOCK_TXINT	3	/* Internal TX and external RX clock */
+#define CLOCK_TXFROMRX	4	/* TX clock derived from external RX clock */
+
+
+#define ENCODING_DEFAULT	0 /* Default setting */
+#define ENCODING_NRZ		1
+#define ENCODING_NRZI		2
+#define ENCODING_FM_MARK	3
+#define ENCODING_FM_SPACE	4
+#define ENCODING_MANCHESTER	5
+
+
+#define PARITY_DEFAULT		0 /* Default setting */
+#define PARITY_NONE		1 /* No parity */
+#define PARITY_CRC16_PR0	2 /* CRC16, initial value 0x0000 */
+#define PARITY_CRC16_PR1	3 /* CRC16, initial value 0xFFFF */
+#define PARITY_CRC16_PR0_CCITT	4 /* CRC16, initial 0x0000, ITU-T version */
+#define PARITY_CRC16_PR1_CCITT	5 /* CRC16, initial 0xFFFF, ITU-T version */
+#define PARITY_CRC32_PR0_CCITT	6 /* CRC32, initial value 0x00000000 */
+#define PARITY_CRC32_PR1_CCITT	7 /* CRC32, initial value 0xFFFFFFFF */
+
+#define LMI_DEFAULT		0 /* Default setting */
+#define LMI_NONE		1 /* No LMI, all PVCs are static */
+#define LMI_ANSI		2 /* ANSI Annex D */
+#define LMI_CCITT		3 /* ITU-T Annex A */
+#define LMI_CISCO		4 /* The "original" LMI, aka Gang of Four */
+
+typedef struct { 
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+} sync_serial_settings;          /* V.35, V.24, X.21 */
+
+typedef struct { 
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+	unsigned int slot_map;
+} te1_settings;                  /* T1, E1 */
+
+typedef struct {
+	unsigned short encoding;
+	unsigned short parity;
+} raw_hdlc_proto;
+
+typedef struct {
+	unsigned int t391;
+	unsigned int t392;
+	unsigned int n391;
+	unsigned int n392;
+	unsigned int n393;
+	unsigned short lmi;
+	unsigned short dce; /* 1 for DCE (network side) operation */
+} fr_proto;
+
+typedef struct {
+	unsigned int dlci;
+} fr_proto_pvc;          /* for creating/deleting FR PVCs */
+
+typedef struct {
+	unsigned int dlci;
+	char master[IFNAMSIZ];	/* Name of master FRAD device */
+}fr_proto_pvc_info;		/* for returning PVC information only */
+
+typedef struct {
+    unsigned int interval;
+    unsigned int timeout;
+} cisco_proto;
+
+/* PPP doesn't need any info now - supply length = 0 to ioctl */
+
+#endif /* __HDLC_IOCTL_H__ */