ARM: dts: imx53-qsb: Provide the TVE DAC regulators

On imx53-qsb the TVE DAC regulator comes from:

- LDO7 on the board with the Dialog DA9052 PMIC
- VDAC on the board with the MC34708 PMIC

Pass them in the 'dac-supply' node.

While at it, remove the 'regulator-always-on/regulator-boot-on'
properties as the TVE driver will properly handle it.

Tested on a imx53-qsb board with a Dialog DA9052 PMIC.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx53-qsb.dts

@@ -90,7 +90,6 @@ ldo6_reg: ldo6 {
 			ldo7_reg: ldo7 {
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
 			};
 
 			ldo8_reg: ldo8 {
@@ -113,3 +112,7 @@ ldo10_reg: ldo10 {
 		};
 	};
 };
+
+&tve {
+	dac-supply = <&ldo7_reg>;
+};

arch/arm/boot/dts/imx53-qsrb.dts

@@ -130,8 +130,6 @@ vdac_reg: vdac {
 				regulator-name = "VDAC";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
 			};
 
 			vgen1_reg: vgen1 {
@@ -152,3 +150,7 @@ vgen2_reg: vgen2 {
 		};
 	};
 };
+
+&tve {
+	dac-supply = <&vdac_reg>;
+};