[PATCH] saa7134 update

Major saa7134 driver update.  Changes:
 * add a bunch of new cards.
 * add dvb card support (Pinnacle 300i only for now ...).
 * update empress encoder card support,
   use the new v4l2 mpeg API for the settings.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/media/video/Kconfig

@@ -249,7 +249,9 @@ config VIDEO_SAA7134
 
 config VIDEO_SAA7134_DVB
 	tristate "DVB Support for saa7134 based TV cards"
-	depends on VIDEO_SAA7134 && DVB_CORE && BROKEN
+	depends on VIDEO_SAA7134 && DVB_CORE
+	select VIDEO_BUF_DVB
+	select DVB_MT352
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.

drivers/media/video/saa7134/Makefile

@@ -8,3 +8,4 @@ obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o
 
 EXTRA_CFLAGS += -I$(src)/..
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends

drivers/media/video/saa7134/saa7134-core.c

 /*
- * $Id: saa7134-core.c,v 1.15 2004/11/07 14:44:59 kraxel Exp $
+ * $Id: saa7134-core.c,v 1.28 2005/02/22 09:56:29 kraxel Exp $
  *
  * device driver for philips saa7134 based TV cards
  * driver core
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/kmod.h>
@@ -88,7 +89,7 @@ MODULE_PARM_DESC(card,     "card type");
 static DECLARE_MUTEX(devlist_lock);
 LIST_HEAD(saa7134_devlist);
 static LIST_HEAD(mops_list);
-unsigned int saa7134_devcount;
+static unsigned int saa7134_devcount;
 
 #define dprintk(fmt, arg...)	if (core_debug) \
 	printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
@@ -620,7 +621,7 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 			dump_statusregs(dev);
 #endif
 
-		if (report & SAA7134_IRQ_REPORT_INTL)
+		if (report & SAA7134_IRQ_REPORT_RDCAP /* _INTL */)
 			saa7134_irq_video_intl(dev);
 
 		if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
@@ -642,8 +643,8 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 			       SAA7134_IRQ_REPORT_GPIO18)) &&
 		    dev->remote)
 			saa7134_input_irq(dev);
+	}
 
-	};
 	if (10 == loop) {
 		print_irqstatus(dev,loop,report,status);
 		if (report & SAA7134_IRQ_REPORT_PE) {
@@ -651,6 +652,13 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 			printk(KERN_WARNING "%s/irq: looping -- "
 			       "clearing PE (parity error!) enable bit\n",dev->name);
 			saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
+		} else if (report & (SAA7134_IRQ_REPORT_GPIO16 |
+				     SAA7134_IRQ_REPORT_GPIO18)) {
+			/* disable gpio IRQs */
+			printk(KERN_WARNING "%s/irq: looping -- "
+			       "clearing GPIO enable bits\n",dev->name);
+			saa_clearl(SAA7134_IRQ2, (SAA7134_IRQ2_INTE_GPIO16 |
+						  SAA7134_IRQ2_INTE_GPIO18));
 		} else {
 			/* disable all irqs */
 			printk(KERN_WARNING "%s/irq: looping -- "
@@ -725,20 +733,7 @@ static int saa7134_hwinit2(struct saa7134_dev *dev)
 
 	/* enable IRQ's */
 	saa_writel(SAA7134_IRQ1, 0);
-	saa_writel(SAA7134_IRQ2,
-		   SAA7134_IRQ2_INTE_GPIO18  |
-		   SAA7134_IRQ2_INTE_GPIO18A |
-		   SAA7134_IRQ2_INTE_GPIO16  |
-		   SAA7134_IRQ2_INTE_SC2     |
-		   SAA7134_IRQ2_INTE_SC1     |
-		   SAA7134_IRQ2_INTE_SC0     |
-		   /* SAA7134_IRQ2_INTE_DEC5    |  FIXME: TRIG_ERR ??? */
-		   SAA7134_IRQ2_INTE_DEC3    |
-		   SAA7134_IRQ2_INTE_DEC2    |
-		   /* SAA7134_IRQ2_INTE_DEC1    | */
-		   SAA7134_IRQ2_INTE_DEC0    |
-		   SAA7134_IRQ2_INTE_PE      |
-		   SAA7134_IRQ2_INTE_AR);
+	saa_writel(SAA7134_IRQ2, dev->irq2_mask);
 
 	return 0;
 }
@@ -959,6 +954,13 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	}
 
 	/* initialize hardware #1 */
+   	dev->irq2_mask =
+		SAA7134_IRQ2_INTE_DEC3    |
+		SAA7134_IRQ2_INTE_DEC2    |
+		SAA7134_IRQ2_INTE_DEC1    |
+		SAA7134_IRQ2_INTE_DEC0    |
+		SAA7134_IRQ2_INTE_PE      |
+		SAA7134_IRQ2_INTE_AR;
 	saa7134_board_init1(dev);
 	saa7134_hwinit1(dev);
 
@@ -1060,6 +1062,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	}
 	list_add_tail(&dev->devlist,&saa7134_devlist);
 	up(&devlist_lock);
+
+	/* check for signal */
+	saa7134_irq_video_intl(dev);
 	return 0;
 
  fail5:
@@ -1207,6 +1212,8 @@ static int saa7134_init(void)
 
 static void saa7134_fini(void)
 {
+	if (pending_registered)
+		unregister_module_notifier(&pending_notifier);
 	pci_unregister_driver(&saa7134_pci_driver);
 }
 

drivers/media/video/saa7134/saa7134-dvb.c

 /*
- * $Id: saa7134-dvb.c,v 1.4 2004/11/07 14:44:59 kraxel Exp $
+ * $Id: saa7134-dvb.c,v 1.12 2005/02/18 12:28:29 kraxel Exp $
  *
  * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
  *
@@ -30,35 +30,211 @@
 #include "saa7134-reg.h"
 #include "saa7134.h"
 
+#include "dvb-pll.h"
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
+#include "tda1004x.h"
+
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
 
+static unsigned int antenna_pwr = 0;
+module_param(antenna_pwr, int, 0444);
+MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
+
 /* ------------------------------------------------------------------ */
 
-static int dvb_init(struct saa7134_dev *dev)
+static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
 {
-	printk("%s: %s\n",dev->name,__FUNCTION__);
+	u32 ok;
+
+	if (!on) {
+		saa_setl(SAA7134_GPIO_GPMODE0 >> 2,     (1 << 26));
+		saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
+		return 0;
+	}
+
+	saa_setl(SAA7134_GPIO_GPMODE0 >> 2,     (1 << 26));
+	saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2,   (1 << 26));
+	udelay(10);
+
+	saa_setl(SAA7134_GPIO_GPMODE0 >> 2,     (1 << 28));
+	saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
+	udelay(10);
+	saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2,   (1 << 28));
+	udelay(10);
+	ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
+	printk("%s: %s %s\n", dev->name, __FUNCTION__,
+	       ok ? "on" : "off");
+
+	if (!ok)
+		saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2,   (1 << 26));
+	return ok;
+}
+
+static int mt352_pinnacle_init(struct dvb_frontend* fe)
+{
+	static u8 clock_config []  = { CLOCK_CTL,  0x3d, 0x28 };
+	static u8 reset []         = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0xa0 };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
+	static u8 fsm_ctl_cfg[]    = { 0x7b,       0x04 };
+	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x0f };
+	static u8 scan_ctl_cfg []  = { SCAN_CTL,   0x0d };
+	static u8 irq_cfg []       = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
+	struct saa7134_dev *dev= fe->dvb->priv;
+
+	printk("%s: %s called\n",dev->name,__FUNCTION__);
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+
+	mt352_write(fe, fsm_ctl_cfg,    sizeof(fsm_ctl_cfg));
+	mt352_write(fe, scan_ctl_cfg,   sizeof(scan_ctl_cfg));
+	mt352_write(fe, irq_cfg,        sizeof(irq_cfg));
+	return 0;
+}
+
+static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
+				  struct dvb_frontend_parameters* params,
+				  u8* pllbuf)
+{
+	static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
+	static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
+	struct saa7134_dev *dev = fe->dvb->priv;
+	struct v4l2_frequency f;
+
+	/* set frequency (mt2050) */
+	f.tuner     = 0;
+	f.type      = V4L2_TUNER_DIGITAL_TV;
+	f.frequency = params->frequency / 1000 * 16 / 1000;
+	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+	saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
+	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
+
+	pinnacle_antenna_pwr(dev, antenna_pwr);
+
+	/* mt352 setup */
+	mt352_pinnacle_init(fe);
+	pllbuf[0] = 0xc2;
+	pllbuf[1] = 0x00;
+	pllbuf[2] = 0x00;
+	pllbuf[3] = 0x80;
+	pllbuf[4] = 0x00;
+	return 0;
+}
+
+static struct mt352_config pinnacle_300i = {
+	.demod_address = 0x3c >> 1,
+	.adc_clock     = 20333,
+	.if2           = 36150,
+	.no_tuner      = 1,
+	.demod_init    = mt352_pinnacle_init,
+	.pll_set       = mt352_pinnacle_pll_set,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int medion_cardbus_init(struct dvb_frontend* fe)
+{
+	/* anything to do here ??? */
+	return 0;
+}
+
+static int medion_cardbus_pll_set(struct dvb_frontend* fe,
+				  struct dvb_frontend_parameters* params)
+{
+	struct saa7134_dev *dev = fe->dvb->priv;
+	struct v4l2_frequency f;
+
+	/*
+	 * this instructs tuner.o to set the frequency, the call will
+	 * end up in tuner_command(), VIDIOC_S_FREQUENCY switch.
+	 * tda9887.o will see that as well.
+	 */
+	f.tuner     = 0;
+	f.type      = V4L2_TUNER_DIGITAL_TV;
+	f.frequency = params->frequency / 1000 * 16 / 1000;
+	saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
+	return 0;
+}
 
+static int fe_request_firmware(struct dvb_frontend* fe,
+			       const struct firmware **fw, char* name)
+{
+	struct saa7134_dev *dev = fe->dvb->priv;
+	return request_firmware(fw, name, &dev->pci->dev);
+}
+
+struct tda1004x_config medion_cardbus = {
+	.demod_address = 0x08,  /* not sure this is correct */
+	.invert        = 0,
+        .invert_oclk   = 0,
+        .pll_init      = medion_cardbus_init,
+        .pll_set       = medion_cardbus_pll_set,
+        .request_firmware = fe_request_firmware,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int dvb_init(struct saa7134_dev *dev)
+{
 	/* init struct videobuf_dvb */
+	dev->ts.nr_bufs    = 32;
+	dev->ts.nr_packets = 32*4;
 	dev->dvb.name = dev->name;
 	videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
 			    dev->pci, &dev->slock,
 			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			    V4L2_FIELD_TOP,
+			    V4L2_FIELD_ALTERNATE,
 			    sizeof(struct saa7134_buf),
 			    dev);
 
-	/* TODO: init frontend */
+	switch (dev->board) {
+	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+		printk("%s: pinnacle 300i dvb setup\n",dev->name);
+		dev->dvb.frontend = mt352_attach(&pinnacle_300i,
+						 &dev->i2c_adap);
+		break;
+	case SAA7134_BOARD_MD7134:
+		dev->dvb.frontend = tda10046_attach(&medion_cardbus,
+						    &dev->i2c_adap);
 		if (NULL == dev->dvb.frontend)
+			printk("%s: Hmm, looks like this is the old MD7134 "
+			       "version without DVB-T support\n",dev->name);
+		break;
+	default:
+		printk("%s: Huh? unknown DVB card?\n",dev->name);
+		break;
+	}
+
+	if (NULL == dev->dvb.frontend) {
+		printk("%s: frontend initialization failed\n",dev->name);
 		return -1;
+	}
 
 	/* register everything else */
-	return videobuf_dvb_register(&dev->dvb);
+	return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
 }
 
 static int dvb_fini(struct saa7134_dev *dev)
 {
+	static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
+
 	printk("%s: %s\n",dev->name,__FUNCTION__);
+
+	switch (dev->board) {
+	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+		/* otherwise we don't detect the tuner on next insmod */
+		saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+		break;
+	};
 	videobuf_dvb_unregister(&dev->dvb);
 	return 0;
 }
@@ -86,6 +262,5 @@ module_exit(dvb_unregister);
 /*
  * Local variables:
  * c-basic-offset: 8
- * compile-command: "make DVB=1"
  * End:
  */

drivers/media/video/saa7134/saa7134-empress.c

 /*
- * $Id: saa7134-empress.c,v 1.3 2004/11/07 13:17:15 kraxel Exp $
+ * $Id: saa7134-empress.c,v 1.10 2005/02/03 10:24:33 kraxel Exp $
  *
  * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
  *
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -50,16 +51,21 @@ MODULE_PARM_DESC(debug,"enable debug messages");
 
 static void ts_reset_encoder(struct saa7134_dev* dev)
 {
+	if (!dev->empress_started)
+		return;
+
 	saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
 	msleep(10);
    	saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
 	msleep(100);
+	dev->empress_started = 0;
 }
 
-static int ts_init_encoder(struct saa7134_dev* dev, void* arg)
+static int ts_init_encoder(struct saa7134_dev* dev)
 {
 	ts_reset_encoder(dev);
-	saa7134_i2c_call_clients(dev, MPEG_SETPARAMS, arg);
+	saa7134_i2c_call_clients(dev, VIDIOC_S_MPEGCOMP, NULL);
+	dev->empress_started = 1;
  	return 0;
 }
 
@@ -81,18 +87,19 @@ static int ts_open(struct inode *inode, struct file *file)
 		return -ENODEV;
 
 	dprintk("open minor=%d\n",minor);
-	down(&dev->empress_tsq.lock);
 	err = -EBUSY;
-	if (dev->empress_users)
+	if (down_trylock(&dev->empress_tsq.lock))
 		goto done;
+	if (dev->empress_users)
+		goto done_up;
 
 	dev->empress_users++;
 	file->private_data = dev;
-	ts_init_encoder(dev, NULL);
 	err = 0;
 
- done:
+done_up:
 	up(&dev->empress_tsq.lock);
+done:
 	return err;
 }
 
@@ -105,6 +112,7 @@ static int ts_release(struct inode *inode, struct file *file)
 	down(&dev->empress_tsq.lock);
 	if (dev->empress_tsq.reading)
 		videobuf_read_stop(&dev->empress_tsq);
+	videobuf_mmap_free(&dev->empress_tsq);
 	dev->empress_users--;
 
 	/* stop the encoder */
@@ -119,6 +127,9 @@ ts_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
 {
 	struct saa7134_dev *dev = file->private_data;
 
+	if (!dev->empress_started)
+		ts_init_encoder(dev);
+
 	return videobuf_read_stream(&dev->empress_tsq,
 				    data, count, ppos, 0,
 				    file->f_flags & O_NONBLOCK);
@@ -281,8 +292,13 @@ static int ts_do_ioctl(struct inode *inode, struct file *file,
 	case VIDIOC_S_CTRL:
 		return saa7134_common_ioctl(dev, cmd, arg);
 
-	case MPEG_SETPARAMS:
-		return ts_init_encoder(dev, arg);
+	case VIDIOC_S_MPEGCOMP:
+		saa7134_i2c_call_clients(dev, VIDIOC_S_MPEGCOMP, arg);
+		ts_init_encoder(dev);
+		return 0;
+	case VIDIOC_G_MPEGCOMP:
+		saa7134_i2c_call_clients(dev, VIDIOC_G_MPEGCOMP, arg);
+		return 0;
 
 	default:
 		return -ENOIOCTLCMD;
@@ -320,6 +336,26 @@ static struct video_device saa7134_empress_template =
 	.minor	       = -1,
 };
 
+static void empress_signal_update(void* data)
+{
+	struct saa7134_dev* dev = (struct saa7134_dev*) data;
+
+	if (dev->nosignal) {
+		dprintk("no video signal\n");
+		ts_reset_encoder(dev);
+	} else {
+		dprintk("video signal acquired\n");
+		if (dev->empress_users)
+			ts_init_encoder(dev);
+	}
+}
+
+static void empress_signal_change(struct saa7134_dev *dev)
+{
+	schedule_work(&dev->empress_workqueue);
+}
+
+
 static int empress_init(struct saa7134_dev *dev)
 {
 	int err;
@@ -335,6 +371,8 @@ static int empress_init(struct saa7134_dev *dev)
 		 "%s empress (%s)", dev->name,
 		 saa7134_boards[dev->board].name);
 
+	INIT_WORK(&dev->empress_workqueue, empress_signal_update, (void*) dev);
+
 	err = video_register_device(dev->empress_dev,VFL_TYPE_GRABBER,
 				    empress_nr[dev->nr]);
 	if (err < 0) {
@@ -353,6 +391,8 @@ static int empress_init(struct saa7134_dev *dev)
 			    V4L2_FIELD_ALTERNATE,
 			    sizeof(struct saa7134_buf),
 			    dev);
+
+	empress_signal_update(dev);
 	return 0;
 }
 
@@ -362,6 +402,7 @@ static int empress_fini(struct saa7134_dev *dev)
 
 	if (NULL == dev->empress_dev)
 		return 0;
+	flush_scheduled_work();
 	video_unregister_device(dev->empress_dev);
 	dev->empress_dev = NULL;
 	return 0;
@@ -371,6 +412,7 @@ static struct saa7134_mpeg_ops empress_ops = {
 	.type          = SAA7134_MPEG_EMPRESS,
 	.init          = empress_init,
 	.fini          = empress_fini,
+	.signal_change = empress_signal_change,
 };
 
 static int __init empress_register(void)

drivers/media/video/saa7134/saa7134-i2c.c

 /*
- * $Id: saa7134-i2c.c,v 1.7 2004/11/07 13:17:15 kraxel Exp $
+ * $Id: saa7134-i2c.c,v 1.10 2005/01/24 17:37:23 kraxel Exp $
  *
  * device driver for philips saa7134 based TV cards
  * i2c interface support
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -205,7 +206,8 @@ static inline int i2c_send_byte(struct saa7134_dev *dev,
 	dword &= 0x0f;
 	dword |= (attr << 6);
 	dword |= ((__u32)data << 8);
-	dword |= 0x00 << 16;
+	dword |= 0x00 << 16;  /* 100 kHz */
+//	dword |= 0x40 << 16;  /* 400 kHz */
 	dword |= 0xf0 << 24;
 	saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword);
 #endif
@@ -248,13 +250,24 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
 		if (!i2c_reset(dev))
 			return -EIO;
 
+	d2printk("start xfer\n");
 	d1printk(KERN_DEBUG "%s: i2c xfer:",dev->name);
 	for (i = 0; i < num; i++) {
 		if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) {
 			/* send address */
+			d2printk("send address\n");
 			addr  = msgs[i].addr << 1;
 			if (msgs[i].flags & I2C_M_RD)
 				addr |= 1;
+			if (i > 0 && msgs[i].flags & I2C_M_RD) {
+				/* workaround for a saa7134 i2c bug
+				 * needed to talk to the mt352 demux
+				 * thanks to pinnacle for the hint */
+				int quirk = 0xfd;
+				d1printk(" [%02x quirk]",quirk);
+				i2c_send_byte(dev,START,quirk);
+				i2c_recv_byte(dev);
+			}
 			d1printk(" < %02x", addr);
 			rc = i2c_send_byte(dev,START,addr);
 			if (rc < 0)
@@ -262,6 +275,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
 		}
 		if (msgs[i].flags & I2C_M_RD) {
 			/* read bytes */
+			d2printk("read bytes\n");
 			for (byte = 0; byte < msgs[i].len; byte++) {
 				d1printk(" =");
 				rc = i2c_recv_byte(dev);
@@ -272,6 +286,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
 			}
 		} else {
 			/* write bytes */
+			d2printk("write bytes\n");
 			for (byte = 0; byte < msgs[i].len; byte++) {
 				data = msgs[i].buf[byte];
 				d1printk(" %02x", data);
@@ -281,6 +296,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
 			}
 		}
 	}
+	d2printk("xfer done\n");
 	d1printk(" >");
 	i2c_set_attr(dev,STOP);
 	rc = -EIO;
@@ -313,18 +329,6 @@ static u32 functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_EMUL;
 }
 
-#ifndef I2C_PEC
-static void inc_use(struct i2c_adapter *adap)
-{
-	MOD_INC_USE_COUNT;
-}
-
-static void dec_use(struct i2c_adapter *adap)
-{
-	MOD_DEC_USE_COUNT;
-}
-#endif
-
 static int attach_inform(struct i2c_client *client)
 {
         struct saa7134_dev *dev = client->adapter->algo_data;
@@ -345,12 +349,7 @@ static struct i2c_algorithm saa7134_algo = {
 };
 
 static struct i2c_adapter saa7134_adap_template = {
-#ifdef I2C_PEC
 	.owner         = THIS_MODULE,
-#else
-	.inc_use       = inc_use,
-	.dec_use       = dec_use,
-#endif
 #ifdef I2C_CLASS_TV_ANALOG
 	.class         = I2C_CLASS_TV_ANALOG,
 #endif

drivers/media/video/saa7134/saa7134-input.c

 /*
- * $Id: saa7134-input.c,v 1.12 2004/11/07 13:17:15 kraxel Exp $
+ * $Id: saa7134-input.c,v 1.16 2004/12/10 12:33:39 kraxel Exp $
  *
  * handle saa7134 IR remotes via linux kernel input layer.
  *
@@ -20,6 +20,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
@@ -258,6 +259,55 @@ static IR_KEYTAB_TYPE md2819_codes[IR_KEYTAB_SIZE] = {
 	[ 17 ] = KEY_CHANNELDOWN,	// CHANNEL/PAGE-
 	[ 49 ] = KEY_CHANNELUP		// CHANNEL/PAGE+
 };
+
+static IR_KEYTAB_TYPE videomate_tv_pvr_codes[IR_KEYTAB_SIZE] = {
+	[ 20 ] = KEY_MUTE,
+	[ 36 ] = KEY_ZOOM,
+
+	[  1 ] = KEY_DVD,
+	[ 35 ] = KEY_RADIO,
+	[  0 ] = KEY_TV,
+
+	[ 10 ] = KEY_REWIND,
+	[  8 ] = KEY_PLAYPAUSE,
+	[ 15 ] = KEY_FORWARD,
+
+	[  2 ] = KEY_PREVIOUS,
+	[  7 ] = KEY_STOP,
+	[  6 ] = KEY_NEXT,
+
+	[ 12 ] = KEY_UP,
+	[ 14 ] = KEY_DOWN,
+	[ 11 ] = KEY_LEFT,
+	[ 13 ] = KEY_RIGHT,
+	[ 17 ] = KEY_OK,
+
+	[  3 ] = KEY_MENU,
+	[  9 ] = KEY_SETUP,
+	[  5 ] = KEY_VIDEO,
+	[ 34 ] = KEY_CHANNEL,
+
+	[ 18 ] = KEY_VOLUMEUP,
+	[ 21 ] = KEY_VOLUMEDOWN,
+	[ 16 ] = KEY_CHANNELUP,
+	[ 19 ] = KEY_CHANNELDOWN,
+
+	[  4 ] = KEY_RECORD,
+
+	[ 22 ] = KEY_KP1,
+	[ 23 ] = KEY_KP2,
+	[ 24 ] = KEY_KP3,
+	[ 25 ] = KEY_KP4,
+	[ 26 ] = KEY_KP5,
+	[ 27 ] = KEY_KP6,
+	[ 28 ] = KEY_KP7,
+	[ 29 ] = KEY_KP8,
+	[ 30 ] = KEY_KP9,
+	[ 31 ] = KEY_KP0,
+
+	[ 32 ] = KEY_LANGUAGE,
+	[ 33 ] = KEY_SLEEP,
+};
 /* ---------------------------------------------------------------------- */
 
 static int build_key(struct saa7134_dev *dev)
@@ -335,6 +385,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		break;
 	case SAA7134_BOARD_CINERGY400:
 	case SAA7134_BOARD_CINERGY600:
+	case SAA7134_BOARD_CINERGY600_MK3:
 		ir_codes     = cinergy_codes;
 		mask_keycode = 0x00003f;
 		mask_keyup   = 0x040000;
@@ -353,6 +404,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		polling      = 50; // ms
 		break;
 	case SAA7134_BOARD_MD2819:
+	case SAA7134_BOARD_AVERMEDIA_305:
 	case SAA7134_BOARD_AVERMEDIA_307:
 		ir_codes     = md2819_codes;
 		mask_keycode = 0x0007C8;
@@ -362,6 +414,12 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
 		saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
 		break;
+	case SAA7134_BOARD_VIDEOMATE_TV_PVR:
+		ir_codes     = videomate_tv_pvr_codes;
+		mask_keycode = 0x00003F;
+		mask_keyup   = 0x400000;
+		polling      = 50; // ms
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",

drivers/media/video/saa7134/saa7134-oss.c

 /*
- * $Id: saa7134-oss.c,v 1.11 2004/11/07 13:17:15 kraxel Exp $
+ * $Id: saa7134-oss.c,v 1.13 2004/12/10 12:33:39 kraxel Exp $
  *
  * device driver for philips saa7134 based TV cards
  * oss dsp interface
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/soundcard.h>
@@ -543,6 +544,7 @@ mixer_recsrc_7134(struct saa7134_dev *dev)
 		break;
 	case LINE1:
 	case LINE2:
+	case LINE2_LEFT:
 		analog_io = (LINE1 == dev->oss.input) ? 0x00 : 0x08;
 		rate = (32000 == dev->oss.rate) ? 0x01 : 0x03;
 		saa_andorb(SAA7134_ANALOG_IO_SELECT,  0x08, analog_io);
@@ -566,6 +568,7 @@ mixer_recsrc_7133(struct saa7134_dev *dev)
 		value = 0xbbbb32;  /* AUX1 */
 		break;
 	case LINE2:
+	case LINE2_LEFT:
 		value = 0xbbbb54;  /* AUX2 */
 		break;
 	}
@@ -608,6 +611,7 @@ mixer_level(struct saa7134_dev *dev, enum saa7134_audio_in src, int level)
 				   (100 == level) ? 0x00 : 0x10);
 			break;
 		case LINE2:
+		case LINE2_LEFT:
 			saa_andorb(SAA7134_ANALOG_IO_SELECT,  0x20,
 				   (100 == level) ? 0x00 : 0x20);
 			break;

drivers/media/video/saa7134/saa7134-ts.c

 /*
- * $Id: saa7134-ts.c,v 1.12 2004/11/07 13:17:15 kraxel Exp $
+ * $Id: saa7134-ts.c,v 1.14 2005/02/03 10:24:33 kraxel Exp $
  *
  * device driver for philips saa7134 based TV cards
  * video4linux video interface
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -220,10 +221,10 @@ void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status)
 	if (dev->ts_q.curr) {
 		field = dev->ts_q.curr->vb.field;
 		if (field == V4L2_FIELD_TOP) {
-			if ((status & 0x100000) != 0x100000)
+			if ((status & 0x100000) != 0x000000)
 				goto done;
 		} else {
-			if ((status & 0x100000) != 0x000000)
+			if ((status & 0x100000) != 0x100000)
 				goto done;
 		}
 		saa7134_buffer_finish(dev,&dev->ts_q,STATE_DONE);

drivers/media/video/saa7134/saa7134-tvaudio.c

 /*
- * $Id: saa7134-tvaudio.c,v 1.17 2004/11/07 13:17:15 kraxel Exp $
+ * $Id: saa7134-tvaudio.c,v 1.22 2005/01/07 13:11:19 kraxel Exp $
  *
  * device driver for philips saa7134 based TV cards
  * tv audio decoder (fm stereo, nicam, ...)
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -237,13 +238,14 @@ static void mute_input_7134(struct saa7134_dev *dev)
 
 	if (PCI_DEVICE_ID_PHILIPS_SAA7134 == dev->pci->device)
 		/* 7134 mute */
-		saa_writeb(SAA7134_AUDIO_MUTE_CTRL, mute ? 0xff : 0xbb);
+		saa_writeb(SAA7134_AUDIO_MUTE_CTRL, mute ? 0xbf : 0xbb);
 
 	/* switch internal audio mux */
 	switch (in->amux) {
 	case TV:         ausel=0xc0; ics=0x00; ocs=0x02; break;
 	case LINE1:      ausel=0x80; ics=0x00; ocs=0x00; break;
 	case LINE2:      ausel=0x80; ics=0x08; ocs=0x01; break;
+	case LINE2_LEFT: ausel=0x80; ics=0x08; ocs=0x05; break;
 	}
 	saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, ausel);
 	saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x08, ics);
@@ -437,15 +439,16 @@ static int tvaudio_getstereo(struct saa7134_dev *dev, struct saa7134_tvaudio *au
 		nicam = saa_readb(SAA7134_NICAM_STATUS);
 		dprintk("getstereo: nicam=0x%x\n",nicam);
 		switch (nicam & 0x0b) {
-		case 0x08:
-			retval = V4L2_TUNER_SUB_MONO;
-			break;
 		case 0x09:
 			retval = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
 			break;
 		case 0x0a:
 			retval = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 			break;
+		case 0x08:
+		default:
+			retval = V4L2_TUNER_SUB_MONO;
+			break;
 		}
 		break;
 	}
@@ -748,9 +751,16 @@ static int mute_input_7133(struct saa7134_dev *dev)
 	int mask;
 
 	switch (dev->input->amux) {
-	case TV:    reg = 0x02; break;
-	case LINE1: reg = 0x00; break;
-	case LINE2: reg = 0x01; break;
+	case TV:
+		reg = 0x02;
+		break;
+	case LINE1:
+		reg = 0x00;
+		break;
+	case LINE2:
+	case LINE2_LEFT:
+		reg = 0x01;
+		break;
 	}
 	if (dev->ctl_mute)
 		reg = 0x07;
@@ -869,6 +879,21 @@ static int tvaudio_thread_ddep(void *data)
 /* ------------------------------------------------------------------ */
 /* common stuff + external entry points                               */
 
+static void saa7134_enable_i2s(struct saa7134_dev *dev)
+{
+	int i2s_format;
+
+	if (!card_is_empress(dev))
+		return;
+	i2s_format = (dev->input->amux == TV) ? 0x00 : 0x01;
+
+	/* enable I2S audio output for the mpeg encoder */
+	saa_writeb(SAA7134_I2S_OUTPUT_SELECT,  0x80);
+	saa_writeb(SAA7134_I2S_OUTPUT_FORMAT,  i2s_format);
+	saa_writeb(SAA7134_I2S_OUTPUT_LEVEL,   0x0F);
+	saa_writeb(SAA7134_I2S_AUDIO_OUTPUT,   0x01);
+}
+
 int saa7134_tvaudio_rx2mode(u32 rx)
 {
 	u32 mode;
@@ -911,6 +936,7 @@ void saa7134_tvaudio_setinput(struct saa7134_dev *dev,
 		mute_input_7133(dev);
 		break;
 	}
+	saa7134_enable_i2s(dev);
 }
 
 void saa7134_tvaudio_setvolume(struct saa7134_dev *dev, int level)
@@ -946,18 +972,6 @@ int saa7134_tvaudio_init2(struct saa7134_dev *dev)
 	DECLARE_MUTEX_LOCKED(sem);
 	int (*my_thread)(void *data) = NULL;
 
-	/* enable I2S audio output */
-	if (card_is_empress(dev)) {
-		int i2sform = (48000 == dev->oss.rate)
-			? 0x01 : 0x00;
-
-		/* enable I2S output */
-		saa_writeb(SAA7134_I2S_OUTPUT_SELECT,  0x80);
-		saa_writeb(SAA7134_I2S_OUTPUT_FORMAT,  i2sform);
-		saa_writeb(SAA7134_I2S_OUTPUT_LEVEL,   0x0F);
-		saa_writeb(SAA7134_I2S_AUDIO_OUTPUT,   0x01);
-	}
-
 	switch (dev->pci->device) {
 	case PCI_DEVICE_ID_PHILIPS_SAA7134:
 		my_thread = tvaudio_thread;
@@ -977,9 +991,10 @@ int saa7134_tvaudio_init2(struct saa7134_dev *dev)
 		if (dev->thread.pid < 0)
 			printk(KERN_WARNING "%s: kernel_thread() failed\n",
 			       dev->name);
-		wake_up_interruptible(&dev->thread.wq);
+		saa7134_tvaudio_do_scan(dev);
 	}
 
+	saa7134_enable_i2s(dev);
 	return 0;
 }
 

drivers/media/video/saa7134/saa7134-vbi.c

 /*
- * $Id: saa7134-vbi.c,v 1.5 2004/11/07 13:17:15 kraxel Exp $
+ * $Id: saa7134-vbi.c,v 1.6 2004/12/10 12:33:39 kraxel Exp $
  *
  * device driver for philips saa7134 based TV cards
  * video4linux video interface
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 

drivers/media/video/saa7134/saa7134-video.c

 /*
- * $Id: saa7134-video.c,v 1.19 2004/11/07 14:44:59 kraxel Exp $
+ * $Id: saa7134-video.c,v 1.28 2005/02/15 15:59:35 kraxel Exp $
  *
  * device driver for philips saa7134 based TV cards
  * video4linux video interface
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 
@@ -267,6 +268,24 @@ static struct saa7134_tvnorm tvnorms[] = {
 		.chroma_ctrl2  = 0x06,
 		.vgate_misc    = 0x1c,
 
+	},{
+		.name          = "PAL-60",
+		.id            = V4L2_STD_PAL_60,
+
+		.h_start       = 0,
+		.h_stop        = 719,
+		.video_v_start = 22,
+		.video_v_stop  = 22+239,
+		.vbi_v_start   = 10, /* FIXME */
+		.vbi_v_stop    = 21, /* FIXME */
+		.src_timing    = 1,
+
+		.sync_control  = 0x18,
+		.luma_control  = 0x40,
+		.chroma_ctrl1  = 0x81,
+		.chroma_gain   = 0x2a,
+		.chroma_ctrl2  = 0x06,
+		.vgate_misc    = 0x1c,
 	}
 };
 #define TVNORMS ARRAY_SIZE(tvnorms)
@@ -443,11 +462,10 @@ void res_free(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bits)
 
 static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
 {
-	int luma_control,sync_control,mux,nosignal;
+	int luma_control,sync_control,mux;
 
 	dprintk("set tv norm = %s\n",norm->name);
 	dev->tvnorm = norm;
-        nosignal = (0 == (saa_readb(SAA7134_STATUS_VIDEO1) & 0x03));
 
 	mux = card_in(dev,dev->ctl_input).vmux;
 	luma_control = norm->luma_control;
@@ -455,7 +473,7 @@ static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
 
 	if (mux > 5)
 		luma_control |= 0x80; /* svideo */
-	if (noninterlaced || nosignal)
+	if (noninterlaced || dev->nosignal)
 		sync_control |= 0x20;
 
 	/* setup cropping */
@@ -1359,6 +1377,9 @@ static int video_release(struct inode *inode, struct file *file)
 		res_free(dev,fh,RESOURCE_VBI);
 	}
 
+	/* free stuff */
+	videobuf_mmap_free(&fh->cap);
+	videobuf_mmap_free(&fh->vbi);
 	saa7134_pgtable_free(dev->pci,&fh->pt_cap);
 	saa7134_pgtable_free(dev->pci,&fh->pt_vbi);
 
@@ -1472,6 +1493,7 @@ static int saa7134_try_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh,
 			f->fmt.pix.width = maxw;
 		if (f->fmt.pix.height > maxh)
 			f->fmt.pix.height = maxh;
+		f->fmt.pix.width &= ~0x03;
 		f->fmt.pix.bytesperline =
 			(f->fmt.pix.width * fmt->depth) >> 3;
 		f->fmt.pix.sizeimage =
@@ -2267,7 +2289,7 @@ int saa7134_video_init1(struct saa7134_dev *dev)
 	dev->ctl_hue        = ctrl_by_id(V4L2_CID_HUE)->default_value;
 	dev->ctl_saturation = ctrl_by_id(V4L2_CID_SATURATION)->default_value;
 	dev->ctl_volume     = ctrl_by_id(V4L2_CID_AUDIO_VOLUME)->default_value;
-	dev->ctl_mute       = ctrl_by_id(V4L2_CID_AUDIO_MUTE)->default_value;
+	dev->ctl_mute       = 1; // ctrl_by_id(V4L2_CID_AUDIO_MUTE)->default_value;
 	dev->ctl_invert     = ctrl_by_id(V4L2_CID_PRIVATE_INVERT)->default_value;
 	dev->ctl_automute   = ctrl_by_id(V4L2_CID_PRIVATE_AUTOMUTE)->default_value;
 
@@ -2317,24 +2339,31 @@ int saa7134_video_fini(struct saa7134_dev *dev)
 void saa7134_irq_video_intl(struct saa7134_dev *dev)
 {
 	static const char *st[] = {
-		"no signal", "found NTSC", "found PAL", "found SECAM" };
-	int norm;
-
-	norm = saa_readb(SAA7134_STATUS_VIDEO1) & 0x03;
-	dprintk("DCSDT: %s\n",st[norm]);
-
-	if (0 != norm) {
-		/* wake up tvaudio audio carrier scan thread */
-		saa7134_tvaudio_do_scan(dev);
-		if (!noninterlaced)
-			saa_clearb(SAA7134_SYNC_CTRL, 0x20);
-	} else {
+		"(no signal)", "NTSC", "PAL", "SECAM" };
+	u32 st1,st2;
+
+	st1 = saa_readb(SAA7134_STATUS_VIDEO1);
+	st2 = saa_readb(SAA7134_STATUS_VIDEO2);
+	dprintk("DCSDT: pll: %s, sync: %s, norm: %s\n",
+		(st1 & 0x40) ? "not locked" : "locked",
+		(st2 & 0x40) ? "no"         : "yes",
+		st[st1 & 0x03]);
+	dev->nosignal = (st1 & 0x40) || (st2 & 0x40);
+
+	if (dev->nosignal) {
 		/* no video signal -> mute audio */
 		if (dev->ctl_automute)
 			dev->automute = 1;
 		saa7134_tvaudio_setmute(dev);
 		saa_setb(SAA7134_SYNC_CTRL, 0x20);
+	} else {
+		/* wake up tvaudio audio carrier scan thread */
+		saa7134_tvaudio_do_scan(dev);
+		if (!noninterlaced)
+			saa_clearb(SAA7134_SYNC_CTRL, 0x20);
 	}
+	if (dev->mops && dev->mops->signal_change)
+		dev->mops->signal_change(dev);
 }
 
 void saa7134_irq_video_done(struct saa7134_dev *dev, unsigned long status)

drivers/media/video/saa7134/saa7134.h

 /*
- * $Id: saa7134.h,v 1.27 2004/11/04 11:03:52 kraxel Exp $
+ * $Id: saa7134.h,v 1.38 2005/03/07 12:01:51 kraxel Exp $
  *
  * v4l2 device driver for philips saa7134 based TV cards
  *
@@ -64,6 +64,7 @@ enum saa7134_audio_in {
 	TV    = 1,
 	LINE1 = 2,
 	LINE2 = 3,
+	LINE2_LEFT,
 };
 
 enum saa7134_video_out {
@@ -156,11 +157,11 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVACSSMARTTV     32
 #define SAA7134_BOARD_AVERMEDIA_DVD_EZMAKER 33
 #define SAA7134_BOARD_NOVAC_PRIMETV7133 34
-#define SAA7134_BOARD_AVERMEDIA_305    35
+#define SAA7134_BOARD_AVERMEDIA_STUDIO_305 35
 #define SAA7133_BOARD_UPMOST_PURPLE_TV 36
 #define SAA7134_BOARD_ITEMS_MTV005     37
 #define SAA7134_BOARD_CINERGY200       38
-#define SAA7134_BOARD_FLYTVPLATINUM    39
+#define SAA7134_BOARD_FLYTVPLATINUM_MINI 39
 #define SAA7134_BOARD_VIDEOMATE_TV_PVR 40
 #define SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUS 41
 #define SAA7134_BOARD_SABRENT_SBTTVFM  42
@@ -169,6 +170,14 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_307    45
 #define SAA7134_BOARD_AVERMEDIA_CARDBUS 46
 #define SAA7134_BOARD_CINERGY400_CARDBUS 47
+#define SAA7134_BOARD_CINERGY600_MK3   48
+#define SAA7134_BOARD_VIDEOMATE_GOLD_PLUS 49
+#define SAA7134_BOARD_PINNACLE_300I_DVBT_PAL 50
+#define SAA7134_BOARD_PROVIDEO_PV952   51
+#define SAA7134_BOARD_AVERMEDIA_305    52
+#define SAA7135_BOARD_ASUSTeK_TVFM7135 53
+#define SAA7134_BOARD_FLYTVPLATINUM_FM 54
+#define SAA7134_BOARD_FLYDVBTDUO 55
 
 #define SAA7134_MAXBOARDS 8
 #define SAA7134_INPUT_MAX 8
@@ -355,6 +364,7 @@ struct saa7134_mpeg_ops {
 	struct list_head           next;
 	int                        (*init)(struct saa7134_dev *dev);
 	int                        (*fini)(struct saa7134_dev *dev);
+	void                       (*signal_change)(struct saa7134_dev *dev);
 };
 
 /* global device status */
@@ -390,6 +400,7 @@ struct saa7134_dev {
 	unsigned int               tuner_type;
 	unsigned int               tda9887_conf;
 	unsigned int               gpio_value;
+	unsigned int               irq2_mask;
 
 	/* i2c i/o */
 	struct i2c_adapter         i2c_adap;
@@ -437,6 +448,7 @@ struct saa7134_dev {
 	struct saa7134_input       *hw_input;
 	unsigned int               hw_mute;
 	int                        last_carrier;
+	int                        nosignal;
 
 	/* SAA7134_MPEG_* */
 	struct saa7134_ts          ts;
@@ -447,6 +459,8 @@ struct saa7134_dev {
 	struct video_device        *empress_dev;
 	struct videobuf_queue      empress_tsq;
 	unsigned int               empress_users;
+	struct work_struct         empress_workqueue;
+	int                        empress_started;
 
 	/* SAA7134_MPEG_DVB only */
 	struct videobuf_dvb        dvb;
@@ -476,7 +490,6 @@ struct saa7134_dev {
 /* saa7134-core.c                                              */
 
 extern struct list_head  saa7134_devlist;
-extern unsigned int      saa7134_devcount;
 
 void saa7134_print_ioctl(char *name, unsigned int cmd);
 void saa7134_track_gpio(struct saa7134_dev *dev, char *msg);

include/media/saa6752hs.h

@@ -18,14 +18,14 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#ifndef _SAA6752HS_H
+#if 0 /* ndef _SAA6752HS_H */
 #define _SAA6752HS_H
 
-enum mpeg_bitrate_mode {
-	MPEG_BITRATE_MODE_VBR = 0, /* Variable bitrate */
-	MPEG_BITRATE_MODE_CBR = 1, /* Constant bitrate */
+enum mpeg_video_bitrate_mode {
+	MPEG_VIDEO_BITRATE_MODE_VBR = 0, /* Variable bitrate */
+	MPEG_VIDEO_BITRATE_MODE_CBR = 1, /* Constant bitrate */
 
-	MPEG_BITRATE_MODE_MAX
+	MPEG_VIDEO_BITRATE_MODE_MAX
 };
 
 enum mpeg_audio_bitrate {
@@ -35,16 +35,33 @@ enum mpeg_audio_bitrate {
 	MPEG_AUDIO_BITRATE_MAX
 };
 
+enum mpeg_video_format {
+	MPEG_VIDEO_FORMAT_D1 = 0,
+	MPEG_VIDEO_FORMAT_2_3_D1 = 1,
+	MPEG_VIDEO_FORMAT_1_2_D1 = 2,
+	MPEG_VIDEO_FORMAT_SIF = 3,
+
+	MPEG_VIDEO_FORMAT_MAX
+};
+
 #define MPEG_VIDEO_TARGET_BITRATE_MAX 27000
 #define MPEG_VIDEO_MAX_BITRATE_MAX 27000
 #define MPEG_TOTAL_BITRATE_MAX 27000
+#define MPEG_PID_MAX ((1 << 14) - 1)
 
 struct mpeg_params {
-	enum mpeg_bitrate_mode bitrate_mode;
+	enum mpeg_video_bitrate_mode video_bitrate_mode;
 	unsigned int video_target_bitrate;
 	unsigned int video_max_bitrate; // only used for VBR
 	enum mpeg_audio_bitrate audio_bitrate;
 	unsigned int total_bitrate;
+
+   	unsigned int pmt_pid;
+	unsigned int video_pid;
+	unsigned int audio_pid;
+	unsigned int pcr_pid;
+
+	enum mpeg_video_format video_format;
 };
 
 #define MPEG_SETPARAMS             _IOW('6',100,struct mpeg_params)