ASoC: ti: Kconfig: Remove the deprecated options

We no longer have these options used anywhere.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/ti/Kconfig

@@ -46,14 +46,10 @@ config SND_SOC_OMAP_DMIC
 	  Say Y or M here if you want to have support for DMIC IP found in
 	  OMAP4 and OMAP5.
 
-config SND_OMAP_SOC_MCBSP
-	tristate
-
 config SND_SOC_OMAP_MCBSP
 	tristate "Multichannel Buffered Serial Port (McBSP) support"
 	depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST
 	select SND_SOC_TI_SDMA_PCM
-	select SND_OMAP_SOC_MCBSP
 	help
 	  Say Y or M here if you want to have support for McBSP IP found in
 	  Texas Instruments OMAP1/2/3/4/5 SoCs.
@@ -209,160 +205,5 @@ config SND_SOC_DM365_VOICE_CODEC
 	  Say Y if you want to add support for SoC On-chip voice codec
 endchoice
 
-menu "Deprecated kconfig options:"
-
-config SND_AM33XX_SOC_EVM
-	tristate "SoC Audio for the AM33XX chip based boards"
-	depends on SOC_AM33XX && I2C
-	select SND_SOC_TLV320AIC3X
-	select SND_SOC_DAVINCI_MCASP
-	help
-	  Say Y or M if you want to add support for SoC audio on AM33XX
-	  boards using McASP and TLV320AIC3X codec. For example AM335X-EVM,
-	  AM335X-EVMSK, and BeagelBone with AudioCape boards have this
-	  setup.
-
-config SND_DAVINCI_SOC_EVM
-	tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
-	depends on ARCH_DAVINCI && I2C
-	depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM
-	select SND_SOC_DAVINCI_EVM
-	help
-	  Say Y if you want to add support for SoC audio on TI
-	  DaVinci DM6446, DM355 or DM365 EVM platforms.
-
-choice
-	prompt "DM365 codec select"
-	depends on SND_DAVINCI_SOC_EVM
-	depends on MACH_DAVINCI_DM365_EVM
-
-config SND_DM365_AIC3X_CODEC
-	tristate "Audio Codec - AIC3101"
-	select SND_SOC_DM365_AIC3X_CODEC
-	help
-	  Say Y if you want to add support for AIC3101 audio codec
-
-config SND_DM365_VOICE_CODEC
-	tristate "Voice Codec - CQ93VC"
-	select SND_SOC_DM365_VOICE_CODEC
-	help
-	  Say Y if you want to add support for SoC On-chip voice codec
-endchoice
-
-config  SND_DM6467_SOC_EVM
-	tristate "SoC Audio support for DaVinci DM6467 EVM"
-	depends on MACH_DAVINCI_DM6467_EVM && I2C
-	select SND_SOC_DAVINCI_EVM
-
-	help
-	  Say Y if you want to add support for SoC audio on TI
-
-config  SND_DA830_SOC_EVM
-	tristate "SoC Audio support for DA830/OMAP-L137 EVM"
-	depends on MACH_DAVINCI_DA830_EVM && I2C
-	select SND_SOC_DAVINCI_EVM
-
-	help
-	  Say Y if you want to add support for SoC audio on TI
-	  DA830/OMAP-L137 EVM
-
-config  SND_DA850_SOC_EVM
-	tristate "SoC Audio support for DA850/OMAP-L138 EVM"
-	depends on MACH_DAVINCI_DA850_EVM && I2C
-	select SND_SOC_DAVINCI_EVM
-	help
-	  Say Y if you want to add support for SoC audio on TI
-	  DA850/OMAP-L138 EVM
-
-config SND_OMAP_SOC_HDMI_AUDIO
-	tristate "HDMI audio support for OMAP4+ based SoCs"
-	select SND_SOC_OMAP_HDMI
-	help
-	  For HDMI audio to work OMAPDSS HDMI support should be
-	  enabled.
-	  The hdmi audio driver implements cpu-dai component using the
-	  callbacks provided by OMAPDSS and registers the component
-	  under DSS HDMI device. Omap-pcm is registered for platform
-	  component also under DSS HDMI device. Dummy codec is used as
-	  as codec component. The hdmi audio driver implements also
-	  the card and registers it under its own platform device.
-	  The device for the driver is registered by OMAPDSS hdmi
-	  driver.
-
-config SND_OMAP_SOC_N810
-	tristate "SoC Audio support for Nokia N810"
-	depends on MACH_NOKIA_N810 && I2C
-	select SND_SOC_NOKIA_N810
-	help
-	  Say Y if you want to add support for SoC audio on Nokia N810.
-
-config SND_OMAP_SOC_RX51
-	tristate "SoC Audio support for Nokia N900 (RX-51)"
-	depends on ARM && I2C && GPIOLIB && ARCH_OMAP3
-	select SND_SOC_NOKIA_RX51
-	help
-	  Say Y if you want to add support for SoC audio on Nokia N900
-	  cellphone.
-
-config SND_OMAP_SOC_AMS_DELTA
-	tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
-	depends on MACH_AMS_DELTA && TTY
-	select SND_SOC_OMAP_AMS_DELTA
-	help
-	  Say Y  if you want to add support  for SoC audio device  connected to
-	  a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
-
-	  Note that in order to get those devices fully supported,  you have to
-	  build  the kernel  with  standard  serial port  driver  included  and
-	  configured for at least 4 ports.  Then, from userspace, you must load
-	  a line discipline #19 on the modem (ttyS3) serial line.  The simplest
-	  way to achieve this is to install util-linux-ng  and use the included
-	  ldattach  utility.  This  can be  started  automatically  from  udev,
-	  a simple rule like this one should do the trick (it does for me):
-	  	ACTION=="add", KERNEL=="controlC0", \
-				RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
-
-config SND_OMAP_SOC_OSK5912
-	tristate "SoC Audio support for omap osk5912"
-	depends on MACH_OMAP_OSK && I2C
-	select SND_SOC_OMAP_OSK5912
-	help
-	  Say Y if you want to add support for SoC audio on osk5912.
-
-config SND_OMAP_SOC_OMAP_TWL4030
-	tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
-	depends on TWL4030_CORE
-	select SND_SOC_OMAP3_TWL4030
-	help
-	  Say Y if you want to add support for SoC audio on TI SoC based boards
-	  using twl4030 as c codec. This driver currently supports:
-	  - Beagleboard or Devkit8000
-	  - Gumstix Overo or CompuLab CM-T35/CM-T3730
-	  - IGEP v2
-	  - OMAP3EVM
-	  - SDP3430
-	  - Zoom2
-
-config SND_OMAP_SOC_OMAP_ABE_TWL6040
-	tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
-	depends on TWL6040_CORE && COMMON_CLK
-	depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
-	select SND_SOC_OMAP_ABE_TWL6040
-	help
-	  Say Y if you want to add support for SoC audio on OMAP boards using
-	  ABE and twl6040 codec. This driver currently supports:
-	  - SDP4430/Blaze boards
-	  - PandaBoard (4430)
-	  - PandaBoardES (4460)
-	  - omap5-uevm (5432)
-
-config SND_OMAP_SOC_OMAP3_PANDORA
-	tristate "SoC Audio support for OMAP3 Pandora"
-	depends on TWL4030_CORE
-	select SND_SOC_OMAP3_PANDORA
-	help
-	  Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
-endmenu
-
 endmenu