Skip to content

L
linux
Commit 0fbfd125 authored by Adrian Hunter's avatar Adrian Hunter Committed by Ulf Hansson
Browse files
Options

mmc: block: Remove code no longer needed after the switch to blk-mq 

Remove code no longer needed after the switch to blk-mq.
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Tested-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent 1bec43a3
Show whitespace changes
Inline Side-by-side
Showing with 16 additions and 964 deletions
drivers/mmc/core/block.c
View file @ 0fbfd125
......@@ -967,8 +967,7 @@ static inline bool mmc_blk_in_tran_state(u32 status)
}
static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
bool hw_busy_detect, struct request *req,
u32 *resp_errs)
struct request *req, u32 *resp_errs)
{
unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
int err = 0;
......@@ -988,11 +987,6 @@ static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
if (resp_errs)
*resp_errs |= status;
/* We may rely on the host hw to handle busy detection.*/
if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) &&
hw_busy_detect)
break;
/*
* Timeout if the device never becomes ready for data and never
* leaves the program state.
......@@ -1014,243 +1008,6 @@ static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
return err;
}
static int card_busy_detect_err(struct mmc_card *card, unsigned int timeout_ms,
bool hw_busy_detect, struct request *req,
bool *gen_err)
{
u32 resp_errs = 0;
int err;
err = card_busy_detect(card, timeout_ms, hw_busy_detect, req,
&resp_errs);
if (resp_errs & R1_ERROR) {
pr_err("%s: %s: error sending status cmd, status %#x\n",
req->rq_disk->disk_name, __func__, resp_errs);
*gen_err = true;
}
return err;
}
static int send_stop(struct mmc_card *card, unsigned int timeout_ms,
struct request *req, bool *gen_err, u32 *stop_status)
{
struct mmc_host *host = card->host;
struct mmc_command cmd = {};
int err;
bool use_r1b_resp = rq_data_dir(req) == WRITE;
/*
* Normally we use R1B responses for WRITE, but in cases where the host
* has specified a max_busy_timeout we need to validate it. A failure
* means we need to prevent the host from doing hw busy detection, which
* is done by converting to a R1 response instead.
*/
if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
use_r1b_resp = false;
cmd.opcode = MMC_STOP_TRANSMISSION;
if (use_r1b_resp) {
cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
cmd.busy_timeout = timeout_ms;
} else {
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
}
err = mmc_wait_for_cmd(host, &cmd, 5);
if (err)
return err;
*stop_status = cmd.resp[0];
/* No need to check card status in case of READ. */
if (rq_data_dir(req) == READ)
return 0;
if (!mmc_host_is_spi(host) &&
(*stop_status & R1_ERROR)) {
pr_err("%s: %s: general error sending stop command, resp %#x\n",
req->rq_disk->disk_name, __func__, *stop_status);
*gen_err = true;
}
return card_busy_detect_err(card, timeout_ms, use_r1b_resp, req,
gen_err);
}
#define ERR_NOMEDIUM 3
#define ERR_RETRY 2
#define ERR_ABORT 1
#define ERR_CONTINUE 0
static int mmc_blk_cmd_error(struct request *req, const char *name, int error,
bool status_valid, u32 status)
{
switch (error) {
case -EILSEQ:
/* response crc error, retry the r/w cmd */
pr_err("%s: %s sending %s command, card status %#x\n",
req->rq_disk->disk_name, "response CRC error",
name, status);
return ERR_RETRY;
case -ETIMEDOUT:
pr_err("%s: %s sending %s command, card status %#x\n",
req->rq_disk->disk_name, "timed out", name, status);
/* If the status cmd initially failed, retry the r/w cmd */
if (!status_valid) {
pr_err("%s: status not valid, retrying timeout\n",
req->rq_disk->disk_name);
return ERR_RETRY;
}
/*
* If it was a r/w cmd crc error, or illegal command
* (eg, issued in wrong state) then retry - we should
* have corrected the state problem above.
*/
if (status & (R1_COM_CRC_ERROR | R1_ILLEGAL_COMMAND)) {
pr_err("%s: command error, retrying timeout\n",
req->rq_disk->disk_name);
return ERR_RETRY;
}
/* Otherwise abort the command */
return ERR_ABORT;
default:
/* We don't understand the error code the driver gave us */
pr_err("%s: unknown error %d sending read/write command, card status %#x\n",
req->rq_disk->disk_name, error, status);
return ERR_ABORT;
}
}
/*
* Initial r/w and stop cmd error recovery.
* We don't know whether the card received the r/w cmd or not, so try to
* restore things back to a sane state. Essentially, we do this as follows:
* - Obtain card status. If the first attempt to obtain card status fails,
* the status word will reflect the failed status cmd, not the failed
* r/w cmd. If we fail to obtain card status, it suggests we can no
* longer communicate with the card.
* - Check the card state. If the card received the cmd but there was a
* transient problem with the response, it might still be in a data transfer
* mode. Try to send it a stop command. If this fails, we can't recover.
* - If the r/w cmd failed due to a response CRC error, it was probably
* transient, so retry the cmd.
* - If the r/w cmd timed out, but we didn't get the r/w cmd status, retry.
* - If the r/w cmd timed out, and the r/w cmd failed due to CRC error or
* illegal cmd, retry.
* Otherwise we don't understand what happened, so abort.
*/
static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
struct mmc_blk_request *brq, bool *ecc_err, bool *gen_err)
{
bool prev_cmd_status_valid = true;
u32 status, stop_status = 0;
int err, retry;
if (mmc_card_removed(card))
return ERR_NOMEDIUM;
/*
* Try to get card status which indicates both the card state
* and why there was no response. If the first attempt fails,
* we can't be sure the returned status is for the r/w command.
*/
for (retry = 2; retry >= 0; retry--) {
err = __mmc_send_status(card, &status, 0);
if (!err)
break;
/* Re-tune if needed */
mmc_retune_recheck(card->host);
prev_cmd_status_valid = false;
pr_err("%s: error %d sending status command, %sing\n",
req->rq_disk->disk_name, err, retry ? "retry" : "abort");
}
/* We couldn't get a response from the card. Give up. */
if (err) {
/* Check if the card is removed */
if (mmc_detect_card_removed(card->host))
return ERR_NOMEDIUM;
return ERR_ABORT;
}
/* Flag ECC errors */
if ((status & R1_CARD_ECC_FAILED) ||
(brq->stop.resp[0] & R1_CARD_ECC_FAILED) ||
(brq->cmd.resp[0] & R1_CARD_ECC_FAILED))
*ecc_err = true;
/* Flag General errors */
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
if ((status & R1_ERROR) ||
(brq->stop.resp[0] & R1_ERROR)) {
pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n",
req->rq_disk->disk_name, __func__,
brq->stop.resp[0], status);
*gen_err = true;
}
/*
* Check the current card state. If it is in some data transfer
* mode, tell it to stop (and hopefully transition back to TRAN.)
*/
if (R1_CURRENT_STATE(status) == R1_STATE_DATA ||
R1_CURRENT_STATE(status) == R1_STATE_RCV) {
unsigned int timeout;
timeout = mmc_blk_data_timeout_ms(card->host, &brq->data);
err = send_stop(card, timeout, req, gen_err, &stop_status);
if (err) {
pr_err("%s: error %d sending stop command\n",
req->rq_disk->disk_name, err);
/*
* If the stop cmd also timed out, the card is probably
* not present, so abort. Other errors are bad news too.
*/
return ERR_ABORT;
}
if (stop_status & R1_CARD_ECC_FAILED)
*ecc_err = true;
}
/* Check for set block count errors */
if (brq->sbc.error)
return mmc_blk_cmd_error(req, "SET_BLOCK_COUNT", brq->sbc.error,
prev_cmd_status_valid, status);
/* Check for r/w command errors */
if (brq->cmd.error)
return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error,
prev_cmd_status_valid, status);
/* Data errors */
if (!brq->stop.error)
return ERR_CONTINUE;
/* Now for stop errors. These aren't fatal to the transfer. */
pr_info("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
req->rq_disk->disk_name, brq->stop.error,
brq->cmd.resp[0], status);
/*
* Subsitute in our own stop status as this will give the error
* state which happened during the execution of the r/w command.
*/
if (stop_status) {
brq->stop.resp[0] = stop_status;
brq->stop.error = 0;
}
return ERR_CONTINUE;
}
static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host,
int type)
{
......@@ -1285,14 +1042,6 @@ static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type)
md->reset_done &= ~type;
}
static void mmc_blk_end_request(struct request *req, blk_status_t error)
{
if (req->mq_ctx)
blk_mq_end_request(req, error);
else
blk_end_request_all(req, error);
}
/*
* The non-block commands come back from the block layer after it queued it and
* processed it with all other requests and then they get issued in this
......@@ -1354,7 +1103,7 @@ static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req)
break;
}
mq_rq->drv_op_result = ret;
mmc_blk_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK);
blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK);
}
static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
......@@ -1397,7 +1146,7 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
else
mmc_blk_reset_success(md, type);
fail:
mmc_blk_end_request(req, status);
blk_mq_end_request(req, status);
}
static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
......@@ -1467,7 +1216,7 @@ static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
if (!err)
mmc_blk_reset_success(md, type);
out:
mmc_blk_end_request(req, status);
blk_mq_end_request(req, status);
}
static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
......@@ -1477,7 +1226,7 @@ static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
int ret = 0;
ret = mmc_flush_cache(card);
mmc_blk_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK);
blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK);
}
/*
......@@ -1557,116 +1306,6 @@ static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq)
}
}
static enum mmc_blk_status mmc_blk_err_check(struct mmc_card *card,
struct mmc_async_req *areq)
{
struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req,
areq);
struct mmc_blk_request *brq = &mq_mrq->brq;
struct request *req = mmc_queue_req_to_req(mq_mrq);
int need_retune = card->host->need_retune;
bool ecc_err = false;
bool gen_err = false;
/*
* sbc.error indicates a problem with the set block count
* command. No data will have been transferred.
*
* cmd.error indicates a problem with the r/w command. No
* data will have been transferred.
*
* stop.error indicates a problem with the stop command. Data
* may have been transferred, or may still be transferring.
*/
mmc_blk_eval_resp_error(brq);
if (brq->sbc.error || brq->cmd.error ||
brq->stop.error || brq->data.error) {
switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) {
case ERR_RETRY:
return MMC_BLK_RETRY;
case ERR_ABORT:
return MMC_BLK_ABORT;
case ERR_NOMEDIUM:
return MMC_BLK_NOMEDIUM;
case ERR_CONTINUE:
break;
}
}
/*
* Check for errors relating to the execution of the
* initial command - such as address errors. No data
* has been transferred.
*/
if (brq->cmd.resp[0] & CMD_ERRORS) {
pr_err("%s: r/w command failed, status = %#x\n",
req->rq_disk->disk_name, brq->cmd.resp[0]);
return MMC_BLK_ABORT;
}
/*
* Everything else is either success, or a data error of some
* kind. If it was a write, we may have transitioned to
* program mode, which we have to wait for it to complete.
*/
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
int err;
/* Check stop command response */
if (brq->stop.resp[0] & R1_ERROR) {
pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
req->rq_disk->disk_name, __func__,
brq->stop.resp[0]);
gen_err = true;
}
err = card_busy_detect_err(card, MMC_BLK_TIMEOUT_MS, false, req,
&gen_err);
if (err)
return MMC_BLK_CMD_ERR;
}
/* if general error occurs, retry the write operation. */
if (gen_err) {
pr_warn("%s: retrying write for general error\n",
req->rq_disk->disk_name);
return MMC_BLK_RETRY;
}
/* Some errors (ECC) are flagged on the next commmand, so check stop, too */
if (brq->data.error || brq->stop.error) {
if (need_retune && !brq->retune_retry_done) {
pr_debug("%s: retrying because a re-tune was needed\n",
req->rq_disk->disk_name);
brq->retune_retry_done = 1;
return MMC_BLK_RETRY;
}
pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n",
req->rq_disk->disk_name, brq->data.error ?: brq->stop.error,
(unsigned)blk_rq_pos(req),
(unsigned)blk_rq_sectors(req),
brq->cmd.resp[0], brq->stop.resp[0]);
if (rq_data_dir(req) == READ) {
if (ecc_err)
return MMC_BLK_ECC_ERR;
return MMC_BLK_DATA_ERR;
} else {
return MMC_BLK_CMD_ERR;
}
}
if (!brq->data.bytes_xfered)
return MMC_BLK_RETRY;
if (blk_rq_bytes(req) != brq->data.bytes_xfered)
return MMC_BLK_PARTIAL;
return MMC_BLK_SUCCESS;
}
static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
int disable_multi, bool *do_rel_wr_p,
bool *do_data_tag_p)
......@@ -1782,8 +1421,6 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
brq->data.sg_len = i;
}
mqrq->areq.mrq = &brq->mrq;
if (do_rel_wr_p)
*do_rel_wr_p = do_rel_wr;
......@@ -1987,8 +1624,6 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
brq->mrq.sbc = &brq->sbc;
}
mqrq->areq.err_check = mmc_blk_err_check;
}
#define MMC_MAX_RETRIES 5
......@@ -2018,7 +1653,7 @@ static int mmc_blk_fix_state(struct mmc_card *card, struct request *req)
mmc_blk_send_stop(card, timeout);
err = card_busy_detect(card, timeout, false, req, NULL);
err = card_busy_detect(card, timeout, req, NULL);
mmc_retune_release(card->host);
......@@ -2242,7 +1877,7 @@ static int mmc_blk_card_busy(struct mmc_card *card, struct request *req)
if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ)
return 0;
err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req, &status);
err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, req, &status);
/*
* Do not assume data transferred correctly if there are any error bits
......@@ -2622,350 +2257,6 @@ enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req)
}
}
static bool mmc_blk_rw_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
struct mmc_blk_request *brq, struct request *req,
bool old_req_pending)
{
bool req_pending;
/*
* If this is an SD card and we're writing, we can first
* mark the known good sectors as ok.
*
* If the card is not SD, we can still ok written sectors
* as reported by the controller (which might be less than
* the real number of written sectors, but never more).
*/
if (mmc_card_sd(card)) {
u32 blocks;
int err;
err = mmc_sd_num_wr_blocks(card, &blocks);
if (err)
req_pending = old_req_pending;
else
req_pending = blk_end_request(req, BLK_STS_OK, blocks << 9);
} else {
req_pending = blk_end_request(req, BLK_STS_OK, brq->data.bytes_xfered);
}
return req_pending;
}
static void mmc_blk_rw_cmd_abort(struct mmc_queue *mq, struct mmc_card *card,
struct request *req,
struct mmc_queue_req *mqrq)
{
if (mmc_card_removed(card))
req->rq_flags |= RQF_QUIET;
while (blk_end_request(req, BLK_STS_IOERR, blk_rq_cur_bytes(req)));
mq->qcnt--;
}
/**
* mmc_blk_rw_try_restart() - tries to restart the current async request
* @mq: the queue with the card and host to restart
* @req: a new request that want to be started after the current one
*/
static void mmc_blk_rw_try_restart(struct mmc_queue *mq, struct request *req,
struct mmc_queue_req *mqrq)
{
if (!req)
return;
/*
* If the card was removed, just cancel everything and return.
*/
if (mmc_card_removed(mq->card)) {
req->rq_flags |= RQF_QUIET;
blk_end_request_all(req, BLK_STS_IOERR);
mq->qcnt--; /* FIXME: just set to 0? */
return;
}
/* Else proceed and try to restart the current async request */
mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq);
mmc_start_areq(mq->card->host, &mqrq->areq, NULL);
}
static void mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *new_req)
{
struct mmc_blk_data *md = mq->blkdata;
struct mmc_card *card = md->queue.card;
struct mmc_blk_request *brq;
int disable_multi = 0, retry = 0, type, retune_retry_done = 0;
enum mmc_blk_status status;
struct mmc_queue_req *mqrq_cur = NULL;
struct mmc_queue_req *mq_rq;
struct request *old_req;
struct mmc_async_req *new_areq;
struct mmc_async_req *old_areq;
bool req_pending = true;
if (new_req) {
mqrq_cur = req_to_mmc_queue_req(new_req);
mq->qcnt++;
}
if (!mq->qcnt)
return;
do {
if (new_req) {
/*
* When 4KB native sector is enabled, only 8 blocks
* multiple read or write is allowed
*/
if (mmc_large_sector(card) &&
!IS_ALIGNED(blk_rq_sectors(new_req), 8)) {
pr_err("%s: Transfer size is not 4KB sector size aligned\n",
new_req->rq_disk->disk_name);
mmc_blk_rw_cmd_abort(mq, card, new_req, mqrq_cur);
return;
}
mmc_blk_rw_rq_prep(mqrq_cur, card, 0, mq);
new_areq = &mqrq_cur->areq;
} else
new_areq = NULL;
old_areq = mmc_start_areq(card->host, new_areq, &status);
if (!old_areq) {
/*
* We have just put the first request into the pipeline
* and there is nothing more to do until it is
* complete.
*/
return;
}
/*
* An asynchronous request has been completed and we proceed
* to handle the result of it.
*/
mq_rq = container_of(old_areq, struct mmc_queue_req, areq);
brq = &mq_rq->brq;
old_req = mmc_queue_req_to_req(mq_rq);
type = rq_data_dir(old_req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE;
switch (status) {
case MMC_BLK_SUCCESS:
case MMC_BLK_PARTIAL:
/*
* Reset success, and accept bytes_xfered. For
* MMC_BLK_PARTIAL re-submit the remaining request. For
* MMC_BLK_SUCCESS error out the remaining request (it
* could not be re-submitted anyway if a next request
* had already begun).
*/
mmc_blk_reset_success(md, type);
req_pending = blk_end_request(old_req, BLK_STS_OK,
brq->data.bytes_xfered);
/*
* If the blk_end_request function returns non-zero even
* though all data has been transferred and no errors
* were returned by the host controller, it's a bug.
*/
if (status == MMC_BLK_SUCCESS && req_pending) {
pr_err("%s BUG rq_tot %d d_xfer %d\n",
__func__, blk_rq_bytes(old_req),
brq->data.bytes_xfered);
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
return;
}
break;
case MMC_BLK_CMD_ERR:
/*
* For SD cards, get bytes written, but do not accept
* bytes_xfered if that fails. For MMC cards accept
* bytes_xfered. Then try to reset. If reset fails then
* error out the remaining request, otherwise retry
* once (N.B mmc_blk_reset() will not succeed twice in a
* row).
*/
req_pending = mmc_blk_rw_cmd_err(md, card, brq, old_req, req_pending);
if (mmc_blk_reset(md, card->host, type)) {
if (req_pending)
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
else
mq->qcnt--;
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
return;
}
if (!req_pending) {
mq->qcnt--;
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
return;
}
break;
case MMC_BLK_RETRY:
/*
* Do not accept bytes_xfered, but retry up to 5 times,
* otherwise same as abort.
*/
retune_retry_done = brq->retune_retry_done;
if (retry++ < 5)
break;
/* Fall through */
case MMC_BLK_ABORT:
/*
* Do not accept bytes_xfered, but try to reset. If
* reset succeeds, try once more, otherwise error out
* the request.
*/
if (!mmc_blk_reset(md, card->host, type))
break;
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
return;
case MMC_BLK_DATA_ERR: {
int err;
/*
* Do not accept bytes_xfered, but try to reset. If
* reset succeeds, try once more. If reset fails with
* ENODEV which means the partition is wrong, then error
* out the request. Otherwise attempt to read one sector
* at a time.
*/
err = mmc_blk_reset(md, card->host, type);
if (!err)
break;
if (err == -ENODEV) {
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
return;
}
/* Fall through */
}
case MMC_BLK_ECC_ERR:
/*
* Do not accept bytes_xfered. If reading more than one
* sector, try reading one sector at a time.
*/
if (brq->data.blocks > 1) {
/* Redo read one sector at a time */
pr_warn("%s: retrying using single block read\n",
old_req->rq_disk->disk_name);
disable_multi = 1;
break;
}
/*
* After an error, we redo I/O one sector at a
* time, so we only reach here after trying to
* read a single sector.
*/
req_pending = blk_end_request(old_req, BLK_STS_IOERR,
brq->data.blksz);
if (!req_pending) {
mq->qcnt--;
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
return;
}
break;
case MMC_BLK_NOMEDIUM:
/* Do not accept bytes_xfered. Error out the request */
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
return;
default:
/* Do not accept bytes_xfered. Error out the request */
pr_err("%s: Unhandled return value (%d)",
old_req->rq_disk->disk_name, status);
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
return;
}
if (req_pending) {
/*
* In case of a incomplete request
* prepare it again and resend.
*/
mmc_blk_rw_rq_prep(mq_rq, card,
disable_multi, mq);
mmc_start_areq(card->host,
&mq_rq->areq, NULL);
mq_rq->brq.retune_retry_done = retune_retry_done;
}
} while (req_pending);
mq->qcnt--;
}
void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
{
int ret;
struct mmc_blk_data *md = mq->blkdata;
struct mmc_card *card = md->queue.card;
if (req && !mq->qcnt)
/* claim host only for the first request */
mmc_get_card(card, NULL);
ret = mmc_blk_part_switch(card, md->part_type);
if (ret) {
if (req) {
blk_end_request_all(req, BLK_STS_IOERR);
}
goto out;
}
if (req) {
switch (req_op(req)) {
case REQ_OP_DRV_IN:
case REQ_OP_DRV_OUT:
/*
* Complete ongoing async transfer before issuing
* ioctl()s
*/
if (mq->qcnt)
mmc_blk_issue_rw_rq(mq, NULL);
mmc_blk_issue_drv_op(mq, req);
break;
case REQ_OP_DISCARD:
/*
* Complete ongoing async transfer before issuing
* discard.
*/
if (mq->qcnt)
mmc_blk_issue_rw_rq(mq, NULL);
mmc_blk_issue_discard_rq(mq, req);
break;
case REQ_OP_SECURE_ERASE:
/*
* Complete ongoing async transfer before issuing
* secure erase.
*/
if (mq->qcnt)
mmc_blk_issue_rw_rq(mq, NULL);
mmc_blk_issue_secdiscard_rq(mq, req);
break;
case REQ_OP_FLUSH:
/*
* Complete ongoing async transfer before issuing
* flush.
*/
if (mq->qcnt)
mmc_blk_issue_rw_rq(mq, NULL);
mmc_blk_issue_flush(mq, req);
break;
default:
/* Normal request, just issue it */
mmc_blk_issue_rw_rq(mq, req);
card->host->context_info.is_waiting_last_req = false;
break;
}
} else {
/* No request, flushing the pipeline with NULL */
mmc_blk_issue_rw_rq(mq, NULL);
card->host->context_info.is_waiting_last_req = false;
}
out:
if (!mq->qcnt)
mmc_put_card(card, NULL);
}
static inline int mmc_blk_readonly(struct mmc_card *card)
{
return mmc_card_readonly(card) ||
......
drivers/mmc/core/block.h
View file @ 0fbfd125
......@@ -5,8 +5,6 @@
struct mmc_queue;
struct request;
void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req);
void mmc_blk_cqe_recovery(struct mmc_queue *mq);
enum mmc_issued;
......
drivers/mmc/core/queue.c
View file @ 0fbfd125
......@@ -24,22 +24,6 @@
#include "card.h"
#include "host.h"
/*
* Prepare a MMC request. This just filters out odd stuff.
*/
static int mmc_prep_request(struct request_queue *q, struct request *req)
{
struct mmc_queue *mq = q->queuedata;
if (mq && mmc_card_removed(mq->card))
return BLKPREP_KILL;
req->rq_flags |= RQF_DONTPREP;
req_to_mmc_queue_req(req)->retries = 0;
return BLKPREP_OK;
}
static inline bool mmc_cqe_dcmd_busy(struct mmc_queue *mq)
{
/* Allow only 1 DCMD at a time */
......@@ -181,86 +165,6 @@ static void mmc_mq_recovery_handler(struct work_struct *work)
blk_mq_run_hw_queues(q, true);
}
static int mmc_queue_thread(void *d)
{
struct mmc_queue *mq = d;
struct request_queue *q = mq->queue;
struct mmc_context_info *cntx = &mq->card->host->context_info;
current->flags |= PF_MEMALLOC;
down(&mq->thread_sem);
do {
struct request *req;
spin_lock_irq(q->queue_lock);
set_current_state(TASK_INTERRUPTIBLE);
req = blk_fetch_request(q);
mq->asleep = false;
cntx->is_waiting_last_req = false;
cntx->is_new_req = false;
if (!req) {
/*
* Dispatch queue is empty so set flags for
* mmc_request_fn() to wake us up.
*/
if (mq->qcnt)
cntx->is_waiting_last_req = true;
else
mq->asleep = true;
}
spin_unlock_irq(q->queue_lock);
if (req || mq->qcnt) {
set_current_state(TASK_RUNNING);
mmc_blk_issue_rq(mq, req);
cond_resched();
} else {
if (kthread_should_stop()) {
set_current_state(TASK_RUNNING);
break;
}
up(&mq->thread_sem);
schedule();
down(&mq->thread_sem);
}
} while (1);
up(&mq->thread_sem);
return 0;
}
/*
* Generic MMC request handler. This is called for any queue on a
* particular host. When the host is not busy, we look for a request
* on any queue on this host, and attempt to issue it. This may
* not be the queue we were asked to process.
*/
static void mmc_request_fn(struct request_queue *q)
{
struct mmc_queue *mq = q->queuedata;
struct request *req;
struct mmc_context_info *cntx;
if (!mq) {
while ((req = blk_fetch_request(q)) != NULL) {
req->rq_flags |= RQF_QUIET;
__blk_end_request_all(req, BLK_STS_IOERR);
}
return;
}
cntx = &mq->card->host->context_info;
if (cntx->is_waiting_last_req) {
cntx->is_new_req = true;
wake_up_interruptible(&cntx->wait);
}
if (mq->asleep)
wake_up_process(mq->thread);
}
static struct scatterlist *mmc_alloc_sg(int sg_len, gfp_t gfp)
{
struct scatterlist *sg;
......@@ -311,12 +215,6 @@ static int __mmc_init_request(struct mmc_queue *mq, struct request *req,
return 0;
}
static int mmc_init_request(struct request_queue *q, struct request *req,
gfp_t gfp)
{
return __mmc_init_request(q->queuedata, req, gfp);
}
static void mmc_exit_request(struct request_queue *q, struct request *req)
{
struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req);
......@@ -469,9 +367,6 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
blk_queue_max_segments(mq->queue, host->max_segs);
blk_queue_max_segment_size(mq->queue, host->max_seg_size);
/* Initialize thread_sem even if it is not used */
sema_init(&mq->thread_sem, 1);
INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);
......@@ -559,51 +454,15 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
spinlock_t *lock, const char *subname)
{
struct mmc_host *host = card->host;
int ret = -ENOMEM;
mq->card = card;
mq->use_cqe = host->cqe_enabled;
if (mq->use_cqe || mmc_host_use_blk_mq(host))
return mmc_mq_init(mq, card, lock);
mq->queue = blk_alloc_queue(GFP_KERNEL);
if (!mq->queue)
return -ENOMEM;
mq->queue->queue_lock = lock;
mq->queue->request_fn = mmc_request_fn;
mq->queue->init_rq_fn = mmc_init_request;
mq->queue->exit_rq_fn = mmc_exit_request;
mq->queue->cmd_size = sizeof(struct mmc_queue_req);
mq->queue->queuedata = mq;
mq->qcnt = 0;
ret = blk_init_allocated_queue(mq->queue);
if (ret) {
blk_cleanup_queue(mq->queue);
return ret;
}
blk_queue_prep_rq(mq->queue, mmc_prep_request);
mmc_setup_queue(mq, card);
mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s",
host->index, subname ? subname : "");
if (IS_ERR(mq->thread)) {
ret = PTR_ERR(mq->thread);
goto cleanup_queue;
}
return 0;
cleanup_queue:
blk_cleanup_queue(mq->queue);
return ret;
}
static void mmc_mq_queue_suspend(struct mmc_queue *mq)
void mmc_queue_suspend(struct mmc_queue *mq)
{
blk_mq_quiesce_queue(mq->queue);
......@@ -615,71 +474,22 @@ static void mmc_mq_queue_suspend(struct mmc_queue *mq)
mmc_release_host(mq->card->host);
}
static void mmc_mq_queue_resume(struct mmc_queue *mq)
void mmc_queue_resume(struct mmc_queue *mq)
{
blk_mq_unquiesce_queue(mq->queue);
}
static void __mmc_queue_suspend(struct mmc_queue *mq)
{
struct request_queue *q = mq->queue;
unsigned long flags;
if (!mq->suspended) {
mq->suspended |= true;
spin_lock_irqsave(q->queue_lock, flags);
blk_stop_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
down(&mq->thread_sem);
}
}
static void __mmc_queue_resume(struct mmc_queue *mq)
{
struct request_queue *q = mq->queue;
unsigned long flags;
if (mq->suspended) {
mq->suspended = false;
up(&mq->thread_sem);
spin_lock_irqsave(q->queue_lock, flags);
blk_start_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
}
void mmc_cleanup_queue(struct mmc_queue *mq)
{
struct request_queue *q = mq->queue;
unsigned long flags;
if (q->mq_ops) {
/*
* The legacy code handled the possibility of being suspended,
* so do that here too.
*/
if (blk_queue_quiesced(q))
blk_mq_unquiesce_queue(q);
goto out_cleanup;
}
/* Make sure the queue isn't suspended, as that will deadlock */
mmc_queue_resume(mq);
/* Then terminate our worker thread */
kthread_stop(mq->thread);
/* Empty the queue */
spin_lock_irqsave(q->queue_lock, flags);
q->queuedata = NULL;
blk_start_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
out_cleanup:
blk_cleanup_queue(q);
/*
......@@ -692,38 +502,6 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
mq->card = NULL;
}
/**
* mmc_queue_suspend - suspend a MMC request queue
* @mq: MMC queue to suspend
*
* Stop the block request queue, and wait for our thread to
* complete any outstanding requests. This ensures that we
* won't suspend while a request is being processed.
*/
void mmc_queue_suspend(struct mmc_queue *mq)
{
struct request_queue *q = mq->queue;
if (q->mq_ops)
mmc_mq_queue_suspend(mq);
else
__mmc_queue_suspend(mq);
}
/**
* mmc_queue_resume - resume a previously suspended MMC request queue
* @mq: MMC queue to resume
*/
void mmc_queue_resume(struct mmc_queue *mq)
{
struct request_queue *q = mq->queue;
if (q->mq_ops)
mmc_mq_queue_resume(mq);
else
__mmc_queue_resume(mq);
}
/*
* Prepare the sg list(s) to be handed of to the host driver
*/
......
drivers/mmc/core/queue.h
View file @ 0fbfd125
......@@ -34,7 +34,6 @@ static inline struct request *mmc_queue_req_to_req(struct mmc_queue_req *mqr)
return blk_mq_rq_from_pdu(mqr);
}
struct task_struct;
struct mmc_blk_data;
struct mmc_blk_ioc_data;
......@@ -44,7 +43,6 @@ struct mmc_blk_request {
struct mmc_command cmd;
struct mmc_command stop;
struct mmc_data data;
int retune_retry_done;
};
/**
......@@ -66,7 +64,6 @@ enum mmc_drv_op {
struct mmc_queue_req {
struct mmc_blk_request brq;
struct scatterlist *sg;
struct mmc_async_req areq;
enum mmc_drv_op drv_op;
int drv_op_result;
void *drv_op_data;
......@@ -76,22 +73,10 @@ struct mmc_queue_req {
struct mmc_queue {
struct mmc_card *card;
struct task_struct *thread;
struct semaphore thread_sem;
struct mmc_ctx ctx;
struct blk_mq_tag_set tag_set;
bool suspended;
bool asleep;
struct mmc_blk_data *blkdata;
struct request_queue *queue;
/*
* FIXME: this counter is not a very reliable way of keeping
* track of how many requests that are ongoing. Switch to just
* letting the block core keep track of requests and per-request
* associated mmc_queue_req data.
*/
int qcnt;
int in_flight[MMC_ISSUE_MAX];
unsigned int cqe_busy;
#define MMC_CQE_DCMD_BUSY BIT(0)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7