powerpc: Remove MMU_FTR_SLB

We now only support cpus that use an SLB, so we don't need an MMU
feature to indicate that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/include/asm/cputable.h

@@ -195,8 +195,7 @@ extern const char *powerpc_base_platform;
 
 #define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
 
-#define MMU_FTR_PPCAS_ARCH_V2 	(MMU_FTR_SLB | MMU_FTR_TLBIEL | \
-				 MMU_FTR_16M_PAGE)
+#define MMU_FTR_PPCAS_ARCH_V2 	(MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE)
 
 /* We only set the altivec features if the kernel was compiled with altivec
  * support

arch/powerpc/include/asm/mmu.h

@@ -64,9 +64,9 @@
  */
 #define MMU_FTR_USE_PAIRED_MAS		ASM_CONST(0x01000000)
 
-/* MMU is SLB-based
+/* Doesn't support the B bit (1T segment) in SLBIE
  */
-#define MMU_FTR_SLB			ASM_CONST(0x02000000)
+#define MMU_FTR_NO_SLBIE_B		ASM_CONST(0x02000000)
 
 /* Support 16M large pages
  */
@@ -88,10 +88,6 @@
  */
 #define MMU_FTR_1T_SEGMENT		ASM_CONST(0x40000000)
 
-/* Doesn't support the B bit (1T segment) in SLBIE
- */
-#define MMU_FTR_NO_SLBIE_B		ASM_CONST(0x80000000)
-
 /* MMU feature bit sets for various CPUs */
 #define MMU_FTRS_DEFAULT_HPTE_ARCH_V2	\
 	MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2

arch/powerpc/include/asm/mmu_context.h

@@ -76,7 +76,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 * sub architectures.
 	 */
 #ifdef CONFIG_PPC_STD_MMU_64
-	if (mmu_has_feature(MMU_FTR_SLB))
 	switch_slb(tsk, next);
 #else
 	/* Out of line for now */

arch/powerpc/kernel/entry_64.S

@@ -482,16 +482,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)
 	ld	r8,KSP(r4)	/* new stack pointer */
 #ifdef CONFIG_PPC_BOOK3S
 BEGIN_FTR_SECTION
-  BEGIN_FTR_SECTION_NESTED(95)
 	clrrdi	r6,r8,28	/* get its ESID */
 	clrrdi	r9,r1,28	/* get current sp ESID */
-  FTR_SECTION_ELSE_NESTED(95)
+FTR_SECTION_ELSE
 	clrrdi	r6,r8,40	/* get its 1T ESID */
 	clrrdi	r9,r1,40	/* get current sp 1T ESID */
-  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95)
-FTR_SECTION_ELSE
-	b	2f
-ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT)
 	clrldi.	r0,r6,2		/* is new ESID c00000000? */
 	cmpd	cr1,r6,r9	/* or is new ESID the same as current ESID? */
 	cror	eq,4*cr1+eq,eq

arch/powerpc/kernel/process.c

@@ -1175,7 +1175,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 #endif
 
 #ifdef CONFIG_PPC_STD_MMU_64
-	if (mmu_has_feature(MMU_FTR_SLB)) {
+	{
 		unsigned long sp_vsid;
 		unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
 

arch/powerpc/kernel/prom.c

@@ -155,7 +155,6 @@ static struct ibm_pa_feature {
 } ibm_pa_features[] __initdata = {
 	{0, 0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
 	{0, 0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
-	{0, MMU_FTR_SLB, 0,		0, 2, 0},
 	{CPU_FTR_CTRL, 0, 0,		0, 3, 0},
 	{CPU_FTR_NOEXECUTE, 0, 0,	0, 6, 0},
 	{CPU_FTR_NODSISRALIGN, 0, 0,	1, 1, 1},

arch/powerpc/mm/hash_utils_64.c

@@ -828,7 +828,6 @@ void __init early_init_mmu(void)
 	htab_initialize();
 
 	/* Initialize SLB management */
-	if (mmu_has_feature(MMU_FTR_SLB))
 	slb_initialize();
 }
 
@@ -840,7 +839,6 @@ void early_init_mmu_secondary(void)
 		mtspr(SPRN_SDR1, _SDR1);
 
 	/* Initialize SLB */
-	if (mmu_has_feature(MMU_FTR_SLB))
 	slb_initialize();
 }
 #endif /* CONFIG_SMP */

arch/powerpc/xmon/xmon.c

@@ -2690,7 +2690,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 }
 
 #ifdef CONFIG_PPC_BOOK3S_64
-static void dump_slb(void)
+void dump_segments(void)
 {
 	int i;
 	unsigned long esid,vsid,valid;
@@ -2722,12 +2722,6 @@ static void dump_slb(void)
 		}
 	}
 }
-
-void dump_segments(void)
-{
-	if (mmu_has_feature(MMU_FTR_SLB))
-		dump_slb();
-}
 #endif
 
 #ifdef CONFIG_PPC_STD_MMU_32