Skip to content

L
linux
Commit 17289c01 authored by Richard Acayan's avatar Richard Acayan Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: sdm670: add opps for peripherals 

The interconnects are now in place. Add Operating Performance Points for
them to allow the kernel to properly manage them.
Signed-off-by: default avatarRichard Acayan <mailingradian@gmail.com>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201010020.84586-3-mailingradian@gmail.com
parent 96ce9227
Hide whitespace changes
Inline Side-by-side
Showing with 109 additions and 0 deletions
arch/arm64/boot/dts/qcom/sdm670.dtsi
View file @ 17289c01
......@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/power/qcom-rpmpd.h>
......@@ -430,6 +431,10 @@ sdhc_1: mmc@7c4000 {
<&gcc GCC_SDCC1_ICE_CORE_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
clock-names = "iface", "core", "xo", "ice", "bus";
interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>;
interconnect-names = "sdhc-ddr", "cpu-sdhc";
operating-points-v2 = <&sdhc1_opp_table>;
iommus = <&apps_smmu 0x140 0xf>;
......@@ -442,6 +447,38 @@ sdhc_1: mmc@7c4000 {
non-removable;
status = "disabled";
sdhc1_opp_table: opp-table {
compatible = "operating-points-v2";
opp-20000000 {
opp-hz = /bits/ 64 <20000000>;
required-opps = <&rpmhpd_opp_min_svs>;
opp-peak-kBps = <80000 80000>;
opp-avg-kBps = <52286 80000>;
};
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <200000 100000>;
opp-avg-kBps = <130718 100000>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
opp-peak-kBps = <200000 130000>;
opp-avg-kBps = <130718 130000>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmhpd_opp_nom>;
opp-peak-kBps = <4096000 4096000>;
opp-avg-kBps = <1338562 1338562>;
};
};
};
gpi_dma0: dma-controller@800000 {
......@@ -477,6 +514,8 @@ qupv3_id_0: geniqup@8c0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>;
interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
......@@ -490,6 +529,10 @@ i2c0: i2c@880000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -507,6 +550,10 @@ i2c1: i2c@884000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -524,6 +571,10 @@ i2c2: i2c@888000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -541,6 +592,10 @@ i2c3: i2c@88c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -558,6 +613,10 @@ i2c4: i2c@890000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -575,6 +634,10 @@ i2c5: i2c@894000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -592,6 +655,10 @@ i2c6: i2c@898000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -609,6 +676,10 @@ i2c7: i2c@89c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
<&gpi_dma0 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -649,6 +720,8 @@ qupv3_id_1: geniqup@ac0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>;
interconnect-names = "qup-core";
status = "disabled";
i2c8: i2c@a80000 {
......@@ -662,6 +735,10 @@ i2c8: i2c@a80000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -679,6 +756,10 @@ i2c9: i2c@a84000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -696,6 +777,10 @@ i2c10: i2c@a88000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -713,6 +798,10 @@ i2c11: i2c@a8c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -730,6 +819,10 @@ i2c12: i2c@a90000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -747,6 +840,10 @@ i2c13: i2c@a94000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -764,6 +861,10 @@ i2c14: i2c@a98000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -781,6 +882,10 @@ i2c15: i2c@a9c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
<&gpi_dma1 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
......@@ -1028,6 +1133,10 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>,
<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
status = "disabled";
usb_1_dwc3: usb@a600000 {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7