HID: amd_sfh: Add command response to check command status

Sometimes sensor enable/disable may take time, without checking the
actual status bits from MP2 FW can lead the amd-sfh to misbehave.

Hence add a status check of enable/disable command
by waiting on the command response before sending the next
command to FW.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/amd-sfh-hid/amd_sfh_client.c

@@ -123,14 +123,24 @@ static void amd_sfh_work_buffer(struct work_struct *work)
 	int i;
 
 	for (i = 0; i < cli_data->num_hid_devices; i++) {
-		report_size = get_input_report(i, cli_data->sensor_idx[i], cli_data->report_id[i],
-					       in_data);
+		if (cli_data->sensor_sts[i] == SENSOR_ENABLED) {
+			report_size = get_input_report
+				(i, cli_data->sensor_idx[i], cli_data->report_id[i], in_data);
 			hid_input_report(cli_data->hid_sensor_hubs[i], HID_INPUT_REPORT,
 					 in_data->input_report[i], report_size, 0);
 		}
+	}
 	schedule_delayed_work(&cli_data->work_buffer, msecs_to_jiffies(AMD_SFH_IDLE_LOOP));
 }
 
+u32 amd_sfh_wait_for_response(struct amd_mp2_dev *mp2, u8 sid, u32 sensor_sts)
+{
+	if (mp2->mp2_ops->response)
+		sensor_sts = mp2->mp2_ops->response(mp2, sid, sensor_sts);
+
+	return sensor_sts;
+}
+
 int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
 {
 	struct amd_input_data *in_data = &privdata->in_data;
@@ -139,8 +149,8 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
 	struct device *dev;
 	u32 feature_report_size;
 	u32 input_report_size;
+	int rc, i, status;
 	u8 cl_idx;
-	int rc, i;
 
 	dev = &privdata->pdev->dev;
 
@@ -155,7 +165,7 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
 		in_data->sensor_virt_addr[i] = dma_alloc_coherent(dev, sizeof(int) * 8,
 								  &cl_data->sensor_dma_addr[i],
 								  GFP_KERNEL);
-		cl_data->sensor_sts[i] = 0;
+		cl_data->sensor_sts[i] = SENSOR_DISABLED;
 		cl_data->sensor_requested_cnt[i] = 0;
 		cl_data->cur_hid_dev = i;
 		cl_idx = cl_data->sensor_idx[i];
@@ -201,7 +211,10 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
 		if (rc)
 			return rc;
 		privdata->mp2_ops->start(privdata, info);
-		cl_data->sensor_sts[i] = 1;
+		status = amd_sfh_wait_for_response
+				(privdata, cl_data->sensor_idx[i], SENSOR_ENABLED);
+		if (status == SENSOR_ENABLED)
+			cl_data->sensor_sts[i] = SENSOR_ENABLED;
 	}
 	schedule_delayed_work(&cl_data->work_buffer, msecs_to_jiffies(AMD_SFH_IDLE_LOOP));
 	return 0;
@@ -224,10 +237,17 @@ int amd_sfh_hid_client_deinit(struct amd_mp2_dev *privdata)
 {
 	struct amdtp_cl_data *cl_data = privdata->cl_data;
 	struct amd_input_data *in_data = cl_data->in_data;
-	int i;
+	int i, status;
 
-	for (i = 0; i < cl_data->num_hid_devices; i++)
-		privdata->mp2_ops->stop(privdata, i);
+	for (i = 0; i < cl_data->num_hid_devices; i++) {
+		if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
+			privdata->mp2_ops->stop(privdata, cl_data->sensor_idx[i]);
+			status = amd_sfh_wait_for_response
+					(privdata, cl_data->sensor_idx[i], SENSOR_DISABLED);
+			if (status != SENSOR_ENABLED)
+				cl_data->sensor_sts[i] = SENSOR_DISABLED;
+		}
+	}
 
 	cancel_delayed_work_sync(&cl_data->work);
 	cancel_delayed_work_sync(&cl_data->work_buffer);

drivers/hid/amd-sfh-hid/amd_sfh_pcie.c

@@ -13,6 +13,7 @@
 #include <linux/dmi.h>
 #include <linux/interrupt.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 
@@ -31,6 +32,20 @@ static int sensor_mask_override = -1;
 module_param_named(sensor_mask, sensor_mask_override, int, 0444);
 MODULE_PARM_DESC(sensor_mask, "override the detected sensors mask");
 
+static int amd_sfh_wait_response_v2(struct amd_mp2_dev *mp2, u8 sid, u32 sensor_sts)
+{
+	union cmd_response cmd_resp;
+
+	/* Get response with status within a max of 800 ms timeout */
+	if (!readl_poll_timeout(mp2->mmio + AMD_P2C_MSG(0), cmd_resp.resp,
+				(cmd_resp.response_v2.response == sensor_sts &&
+				cmd_resp.response_v2.status == 0 && (sid == 0xff ||
+				cmd_resp.response_v2.sensor_id == sid)), 500, 800000))
+		return cmd_resp.response_v2.response;
+
+	return SENSOR_DISABLED;
+}
+
 static void amd_start_sensor_v2(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info)
 {
 	union sfh_cmd_base cmd_base;
@@ -183,6 +198,7 @@ static const struct amd_mp2_ops amd_sfh_ops_v2 = {
 	.start = amd_start_sensor_v2,
 	.stop = amd_stop_sensor_v2,
 	.stop_all = amd_stop_all_sensor_v2,
+	.response = amd_sfh_wait_response_v2,
 };
 
 static const struct amd_mp2_ops amd_sfh_ops = {

drivers/hid/amd-sfh-hid/amd_sfh_pcie.h

@@ -24,12 +24,16 @@
 #define AMD_C2P_MSG2	0x10508
 
 #define AMD_C2P_MSG(regno) (0x10500 + ((regno) * 4))
+#define AMD_P2C_MSG(regno) (0x10680 + ((regno) * 4))
 
 /* MP2 P2C Message Registers */
 #define AMD_P2C_MSG3	0x1068C /* Supported Sensors info */
 
 #define V2_STATUS	0x2
 
+#define SENSOR_ENABLED     4
+#define SENSOR_DISABLED    5
+
 #define HPD_IDX		16
 
 /* SFH Command register */
@@ -51,6 +55,19 @@ union sfh_cmd_base {
 	} cmd_v2;
 };
 
+union cmd_response {
+	u32 resp;
+	struct {
+		u32 status	: 2;
+		u32 out_in_c2p	: 1;
+		u32 rsvd1	: 1;
+		u32 response	: 4;
+		u32 sub_cmd	: 8;
+		u32 sensor_id	: 6;
+		u32 rsvd2	: 10;
+	} response_v2;
+};
+
 union sfh_cmd_param {
 	u32 ul;
 	struct {
@@ -117,5 +134,6 @@ struct amd_mp2_ops {
 	 void (*start)(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info);
 	 void (*stop)(struct amd_mp2_dev *privdata, u16 sensor_idx);
 	 void (*stop_all)(struct amd_mp2_dev *privdata);
+	 int (*response)(struct amd_mp2_dev *mp2, u8 sid, u32 sensor_sts);
 };
 #endif