Merge tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Add some missing type definitions to properties

   - Drop unneeded quotes and use absolute paths in bindings

   - Remove redundant "binding" or "schema" in binding titles

   - Add bindings for Ralink SoCs interrupt controller, QCA2066
     Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
     lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
     ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52

  DT core:

   - Improve the reserved-memory range allocation to maximize contiguous
     space

   - Use device_set_node() helper in place of open coding"

* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
  dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
  dt-bindings: PCI: dwc: rockchip: Update for RK3588
  dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
  dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
  dt-bindings: pwm: drop unneeded quotes
  dt-bindings: crypto: drop unneeded quotes
  dt-bindings: arm: socionext: add Synquacer platforms
  dt-bindings: connector: usb: allow a single HS port
  dt-bindings: bus: ti-sysc: fix typo
  of: reserved_mem: Use stable allocation order
  of: reserved_mem: Try to keep range allocations contiguous
  dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
  dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
  dt-bindings: dvfs: drop unneeded quotes
  dt-bindings: gpu: drop unneeded quotes
  dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
  dt-bindings: rockchip: grf: drop unneeded quotes
  dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
  dt-bindings: Remove last usage of "binding" or "schema" in titles
  dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
  ...

Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml

@@ -122,14 +122,14 @@ properties:
   arm,vexpress,position:
     description: When daughterboards are stacked on one site, their position
       in the stack be be described this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
   arm,vexpress,dcc:
     description: When describing tiles consisting of more than one DCC, its
       number can be specified with this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
@@ -180,13 +180,13 @@ patternProperties:
               - const: simple-bus
           arm,v2m-memory-map:
             description: This describes the memory map type.
-            $ref: '/schemas/types.yaml#/definitions/string'
+            $ref: /schemas/types.yaml#/definitions/string
             enum:
               - rs1
               - rs2
 
           arm,hbi:
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             description: This indicates the ARM HBI (Hardware Board ID), this is
               ARM's unique board model ID, visible on the PCB's silkscreen.
 
@@ -197,7 +197,7 @@ patternProperties:
               property, describing the physical location of the children nodes.
               0 means motherboard site, while 1 and 2 are daughterboard sites, and
               0xf means "sisterboard" which is the site containing the main CPU tile.
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 15
 

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -153,6 +153,7 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,cortex-r52
       - arm,cortex-x1
       - arm,cortex-x1c
       - arm,cortex-x2
@@ -196,7 +197,7 @@ properties:
       - qcom,scorpion
 
   enable-method:
-    $ref: '/schemas/types.yaml#/definitions/string'
+    $ref: /schemas/types.yaml#/definitions/string
     oneOf:
       # On ARM v8 64-bit this property is required
       - enum:
@@ -245,8 +246,8 @@ properties:
 
   cpu-release-addr:
     oneOf:
-      - $ref: '/schemas/types.yaml#/definitions/uint32'
-      - $ref: '/schemas/types.yaml#/definitions/uint64'
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
     description:
       The DT specification defines this as 64-bit always, but some 32-bit Arm
       systems have used a 32-bit value which must be supported.
@@ -254,7 +255,7 @@ properties:
         property value of "spin-table".
 
   cpu-idle-states:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
     description: |
@@ -270,7 +271,7 @@ properties:
   cci-control-port: true
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The
@@ -307,7 +308,7 @@ properties:
       PM domain provider, must be "psci".
 
   qcom,saw:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the SAW* node associated with this CPU.
 
@@ -317,7 +318,7 @@ properties:
       * arm/msm/qcom,saw2.txt
 
   qcom,acc:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the ACC* node associated with this CPU.
 
@@ -328,7 +329,7 @@ properties:
       * arm/msm/qcom,kpss-acc.txt
 
   rockchip,pmu:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the syscon node controlling the cpu core power domains.
 
@@ -338,7 +339,7 @@ properties:
       the cpu-core power-domains.
 
   secondary-boot-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Required for systems that have an "enable-method" property value of
       "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".

Documentation/devicetree/bindings/arm/psci.yaml

@@ -100,7 +100,7 @@ properties:
 
 patternProperties:
   "^power-domain-":
-    $ref: "../power/power-domain.yaml#"
+    $ref: /schemas/power/power-domain.yaml#
 
     type: object
     description: |

Documentation/devicetree/bindings/arm/socionext/synquacer.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/synquacer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext Synquacer platform
+
+maintainers:
+  - Masahisa Kojima <masahisa.kojima@linaro.org>
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description:
+  Socionext SC2A11B (Synquacer) SoC based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - socionext,developer-box
+          - const: socionext,synquacer
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml

@@ -40,6 +40,7 @@ properties:
   linux,keymap: true
 
   linux,no-autorepeat:
+    type: boolean
     description: Disable keyrepeat
 
   default-brightness-level:

Documentation/devicetree/bindings/bus/ti-sysc.yaml

@@ -97,7 +97,7 @@ properties:
       - enum: [ ick, fck, sys_clk ]
       - items:
           - const: fck
-          - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
+          - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ]
       - items:
           - const: fck
           - const: phy-clk

Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM63268 Timer Clock and Reset Device Tree Bindings
+title: Broadcom BCM63268 Timer Clock and Reset
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>

Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8MP AudioMIX Block Control Binding
+title: NXP i.MX8MP AudioMIX Block Control
 
 maintainers:
   - Marek Vasut <marex@denx.de>

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -168,6 +168,13 @@ properties:
       offer the power, Capability Mismatch is set. Required for power sink and
       power dual role.
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: OF graph bindings modeling a data bus to the connector, e.g.
+      there is a single High Speed (HS) port present in this connector. If there
+      is more than one bus (several port, with 'reg' property), they can be grouped
+      under 'ports'.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     description: OF graph bindings modeling any data bus to the connector
@@ -322,6 +329,19 @@ examples:
         };
     };
 
+  # USB-C connector attached to SoC with a single High-Speed controller
+  - |
+    connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+
+        port {
+            high_speed_ep: endpoint {
+                remote-endpoint = <&usb_hs_ep>;
+            };
+        };
+    };
+
   # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
   # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and
   # the output of MUX is connected to the SoC.

Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml

@@ -19,8 +19,8 @@ properties:
 
   interrupts:
     items:
-      - description: "Interrupt for flow 0"
-      - description: "Interrupt for flow 1"
+      - description: Interrupt for flow 0
+      - description: Interrupt for flow 1
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml

@@ -103,6 +103,12 @@ properties:
       wakeup-source: true
 
       linux,keycode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 116
+        deprecated: true
+
+      linux,keycodes:
+        maxItems: 1
         default: 116
 
     required:

Documentation/devicetree/bindings/crypto/fsl-dcp.yaml

@@ -11,9 +11,15 @@ maintainers:
 
 properties:
   compatible:
-    enum:
+    oneOf:
+      - enum:
           - fsl,imx23-dcp
           - fsl,imx28-dcp
+      - items:
+          - enum:
+              - fsl,imx6sl-dcp
+              - fsl,imx6ull-dcp
+          - const: fsl,imx28-dcp
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml

@@ -2,8 +2,8 @@
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP4xx cryptographic engine
 
@@ -21,7 +21,7 @@ properties:
     const: intel,ixp4xx-crypto
 
   intel,npe-handle:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       - items:
           - description: phandle to the NPE this crypto engine

Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml

@@ -26,6 +26,7 @@ properties:
     const: dp
 
   force-hpd:
+    type: boolean
     description:
       Indicate driver need force hpd when hpd detect failed, this
       is used for some eDP screen which don not have a hpd signal.

Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml

@@ -20,6 +20,7 @@ properties:
     maxItems: 1
 
   video-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0x230145
     maximum: 0xffffff
     description:

Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml

@@ -67,6 +67,7 @@ properties:
     items:
       - enum:
           - sainsmart18
+          - shineworld,lh133k
       - const: panel-mipi-dbi-spi
 
   write-only:
@@ -86,6 +87,8 @@ properties:
       Logic level supply for interface signals (Vddi).
       No need to set if this is the same as power-supply.
 
+  spi-3wire: true
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/dvfs/performance-domain.yaml

@@ -42,7 +42,7 @@ properties:
     enum: [ 0, 1 ]
 
   performance-domains:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       A phandle and performance domain specifier as defined by bindings of the
       performance controller/provider specified by phandle.

Documentation/devicetree/bindings/eeprom/at25.yaml

@@ -33,6 +33,7 @@ properties:
               - microchip,25lc040
               - st,m95m02
               - st,m95256
+              - st,m95640
               - cypress,fm25
 
           - const: atmel,at25

Documentation/devicetree/bindings/example-schema.yaml

@@ -52,8 +52,7 @@ properties:
               - vendor,soc4-ip
               - vendor,soc3-ip
               - vendor,soc2-ip
-          - enum:
-              - vendor,soc1-ip
+          - const: vendor,soc1-ip
         # additionalItems being false is implied
         # minItems/maxItems equal to 2 is implied
       - items:
@@ -85,6 +84,9 @@ properties:
       discouraged.
 
   clock-names:
+    # For single-entry lists in clocks, resets etc., the xxx-names often do not
+    # bring any value, especially if they copy the IP block name.  In such case
+    # just skip the xxx-names.
     items:
       - const: bus
 

Documentation/devicetree/bindings/firmware/arm,scmi.yaml

@@ -214,7 +214,7 @@ properties:
         patternProperties:
           '^regulator@[0-9a-f]+$':
             type: object
-            $ref: "../regulator/regulator.yaml#"
+            $ref: /schemas/regulator/regulator.yaml#
             unevaluatedProperties: false
 
             properties:

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -86,7 +86,7 @@ properties:
     const: 2
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The

Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml

@@ -92,7 +92,7 @@ properties:
   dma-coherent: true
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The

Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Conor Culhane <conor.culhane@silvaco.com>
 
 allOf:
-  - $ref: "i3c.yaml#"
+  - $ref: i3c.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml

@@ -55,7 +55,7 @@ patternProperties:
 
       interrupt-names: true
 
-      linux-keycodes:
+      linux,keycodes:
         maxItems: 1
 
       wakeup-source: true

Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml → Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml

 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml#
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microchip External Interrupt Controller

Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoCs Interrupt Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description:
+  This interrupt controller support a central point for interrupt aggregation
+  for platform related blocks.
+
+properties:
+  compatible:
+    const: ralink,rt2880-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@200 {
+      compatible = "ralink,rt2880-intc";
+      reg = <0x200 0x100>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>;
+    };
+...

Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml

@@ -36,7 +36,7 @@ properties:
     description:
       A list of channels tied to this function, used for matching
       the function to a set of virtual channels.
-    $ref: "/schemas/types.yaml#/definitions/string-array"
+    $ref: /schemas/types.yaml#/definitions/string-array
     items:
       - const: fastrpcglink-apps-dsp
 
@@ -48,14 +48,14 @@ properties:
   qcom,smd-channels:
     description:
       Channel name used for the RPM communication
-    $ref: "/schemas/types.yaml#/definitions/string-array"
+    $ref: /schemas/types.yaml#/definitions/string-array
     items:
       - const: fastrpcsmd-apps-dsp
 
   qcom,vmids:
     description:
       Virtual machine IDs for remote processor.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   "#address-cells":
     const: 1

Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml

@@ -24,11 +24,12 @@ properties:
       - nxp,88w8997-bt
 
   fw-init-baudrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 115200
     description:
       Chip baudrate after FW is downloaded and initialized.
       This property depends on the module vendor's
-      configuration. If this property is not specified,
-      115200 is set as default.
+      configuration.
 
 required:
   - compatible

Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml

@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,qca2066-bt
       - qcom,qca6174-bt
       - qcom,qca9377-bt
       - qcom,wcn3990-bt
@@ -98,6 +99,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qca2066-bt
               - qcom,qca6174-bt
     then:
       required:

Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

@@ -41,20 +41,24 @@ properties:
       - const: config
 
   clocks:
+    minItems: 5
     items:
       - description: AHB clock for PCIe master
       - description: AHB clock for PCIe slave
       - description: AHB clock for PCIe dbi
       - description: APB clock for PCIe
       - description: Auxiliary clock for PCIe
+      - description: PIPE clock
 
   clock-names:
+    minItems: 5
     items:
       - const: aclk_mst
       - const: aclk_slv
       - const: aclk_dbi
       - const: pclk
       - const: aux
+      - const: pipe
 
   msi-map: true
 
@@ -70,13 +74,19 @@ properties:
     maxItems: 1
 
   ranges:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reset-names:
-    const: pipe
+    oneOf:
+      - const: pipe
+      - items:
+          - const: pwr
+          - const: pipe
 
   vpcie3v3-supply: true
 

Documentation/devicetree/bindings/power/reset/restart-handler.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Restart and shutdown handler generic binding
+title: Restart and shutdown handler Common Properties
 
 maintainers:
   - Sebastian Reichel <sre@kernel.org>

Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Claudiu Beznea <claudiu.beznea@microchip.com>
 
 allOf:
-  - $ref: "pwm.yaml#"
+  - $ref: pwm.yaml#
 
 properties:
   compatible:

Documentation/devicetree/bindings/pwm/mxs-pwm.yaml

@@ -25,7 +25,7 @@ properties:
     const: 3
 
   fsl,pwm-number:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the number of PWM devices
 
 required:

Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common TI PRU Consumer Binding
+title: TI PRU Consumer Common Properties
 
 maintainers:
   - Suman Anna <s-anna@ti.com>

Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: /reserved-memory framebuffer node bindings
+title: /reserved-memory framebuffer node
 
 maintainers:
   - devicetree-spec@vger.kernel.org

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

@@ -119,7 +119,7 @@ allOf:
         usbphy:
           type: object
 
-          $ref: "/schemas/phy/rockchip-usb-phy.yaml#"
+          $ref: /schemas/phy/rockchip-usb-phy.yaml#
 
           unevaluatedProperties: false
 
@@ -134,14 +134,14 @@ allOf:
         gpio:
           type: object
 
-          $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+          $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
 
           unevaluatedProperties: false
 
         power-controller:
           type: object
 
-          $ref: "/schemas/power/rockchip,power-controller.yaml#"
+          $ref: /schemas/power/rockchip,power-controller.yaml#
 
           unevaluatedProperties: false
 
@@ -156,7 +156,7 @@ allOf:
         mipi-dphy-rx0:
           type: object
 
-          $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+          $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml#
 
           unevaluatedProperties: false
 
@@ -184,7 +184,7 @@ allOf:
         reboot-mode:
           type: object
 
-          $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+          $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
 
           unevaluatedProperties: false
 
@@ -238,7 +238,7 @@ allOf:
         io-domains:
           type: object
 
-          $ref: "/schemas/power/rockchip-io-domain.yaml#"
+          $ref: /schemas/power/rockchip-io-domain.yaml#
 
           unevaluatedProperties: false
 

Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml

@@ -14,7 +14,7 @@ description: |+
   for multiple SoCs to control a single SPMI master.
 
 allOf:
-  - $ref: "spmi.yaml"
+  - $ref: spmi.yaml
 
 properties:
   compatible:

Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml

@@ -31,9 +31,13 @@ properties:
           - enum:
               - fsl,imx6sl-gpt
               - fsl,imx6sx-gpt
+              - fsl,imx8mp-gpt
               - fsl,imxrt1050-gpt
               - fsl,imxrt1170-gpt
           - const: fsl,imx6dl-gpt
+      - items:
+          - const: fsl,imx6ul-gpt
+          - const: fsl,imx6sx-gpt
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -139,6 +139,8 @@ properties:
           - infineon,ir38164
             # Infineon IR38263 Voltage Regulator
           - infineon,ir38263
+            # Infineon IRPS5401 Voltage Regulator (PMIC)
+          - infineon,irps5401
             # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
           - infineon,slb9635tt
             # Infineon SLB9645 I2C TPM (new protocol, max 400khz)

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -1189,6 +1189,8 @@ patternProperties:
     description: SHIFT GmbH
   "^shimafuji,.*":
     description: Shimafuji Electric, Inc.
+  "^shineworld,.*":
+    description: ShineWorld Innovations
   "^shiratech,.*":
     description: Shiratech Solutions
   "^si-en,.*":
@@ -1339,6 +1341,8 @@ patternProperties:
     description: Technologic Systems
   "^techstar,.*":
     description: Shenzhen Techstar Electronics Co., Ltd.
+  "^teejet,.*":
+    description: TeeJet
   "^teltonika,.*":
     description: Teltonika Networks
   "^tempo,.*":

MAINTAINERS

@@ -13808,6 +13808,7 @@ MICROCHIP EIC DRIVER
 M:	Claudiu Beznea <claudiu.beznea@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
+F:	Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
 F:	drivers/irqchip/irq-mchp-eic.c
 
 MICROCHIP I2C DRIVER

drivers/of/of_reserved_mem.c

@@ -77,6 +77,57 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
 	return;
 }
 
+/*
+ * __reserved_mem_alloc_in_range() - allocate reserved memory described with
+ *	'alloc-ranges'. Choose bottom-up/top-down depending on nearby existing
+ *	reserved regions to keep the reserved memory contiguous if possible.
+ */
+static int __init __reserved_mem_alloc_in_range(phys_addr_t size,
+	phys_addr_t align, phys_addr_t start, phys_addr_t end, bool nomap,
+	phys_addr_t *res_base)
+{
+	bool prev_bottom_up = memblock_bottom_up();
+	bool bottom_up = false, top_down = false;
+	int ret, i;
+
+	for (i = 0; i < reserved_mem_count; i++) {
+		struct reserved_mem *rmem = &reserved_mem[i];
+
+		/* Skip regions that were not reserved yet */
+		if (rmem->size == 0)
+			continue;
+
+		/*
+		 * If range starts next to an existing reservation, use bottom-up:
+		 *	|....RRRR................RRRRRRRR..............|
+		 *	       --RRRR------
+		 */
+		if (start >= rmem->base && start <= (rmem->base + rmem->size))
+			bottom_up = true;
+
+		/*
+		 * If range ends next to an existing reservation, use top-down:
+		 *	|....RRRR................RRRRRRRR..............|
+		 *	              -------RRRR-----
+		 */
+		if (end >= rmem->base && end <= (rmem->base + rmem->size))
+			top_down = true;
+	}
+
+	/* Change setting only if either bottom-up or top-down was selected */
+	if (bottom_up != top_down)
+		memblock_set_bottom_up(bottom_up);
+
+	ret = early_init_dt_alloc_reserved_memory_arch(size, align,
+			start, end, nomap, res_base);
+
+	/* Restore old setting if needed */
+	if (bottom_up != top_down)
+		memblock_set_bottom_up(prev_bottom_up);
+
+	return ret;
+}
+
 /*
  * __reserved_mem_alloc_size() - allocate reserved memory described by
  *	'size', 'alignment'  and 'alloc-ranges' properties.
@@ -137,8 +188,8 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 			end = start + dt_mem_next_cell(dt_root_size_cells,
 						       &prop);
 
-			ret = early_init_dt_alloc_reserved_memory_arch(size,
-					align, start, end, nomap, &base);
+			ret = __reserved_mem_alloc_in_range(size, align,
+					start, end, nomap, &base);
 			if (ret == 0) {
 				pr_debug("allocated memory for '%s' node: base %pa, size %lu MiB\n",
 					uname, &base,
@@ -217,6 +268,11 @@ static int __init __rmem_cmp(const void *a, const void *b)
 	if (ra->size > rb->size)
 		return 1;
 
+	if (ra->fdt_node < rb->fdt_node)
+		return -1;
+	if (ra->fdt_node > rb->fdt_node)
+		return 1;
+
 	return 0;
 }
 

drivers/of/platform.c

@@ -140,8 +140,8 @@ struct platform_device *of_device_alloc(struct device_node *np,
 		}
 	}
 
-	dev->dev.of_node = of_node_get(np);
-	dev->dev.fwnode = &np->fwnode;
+	/* setup generic device info */
+	device_set_node(&dev->dev, of_fwnode_handle(np));
 	dev->dev.parent = parent ? : &platform_bus;
 
 	if (bus_id)
@@ -239,8 +239,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 	dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
 
 	/* setup generic device info */
-	dev->dev.of_node = of_node_get(node);
-	dev->dev.fwnode = &node->fwnode;
+	device_set_node(&dev->dev, of_fwnode_handle(node));
 	dev->dev.parent = parent ? : &platform_bus;
 	dev->dev.platform_data = platform_data;
 	if (bus_id)

drivers/of/unittest.c

@@ -2658,7 +2658,7 @@ static struct i2c_driver unittest_i2c_dev_driver = {
 	.driver = {
 		.name = "unittest-i2c-dev",
 	},
-	.probe_new = unittest_i2c_dev_probe,
+	.probe = unittest_i2c_dev_probe,
 	.remove = unittest_i2c_dev_remove,
 	.id_table = unittest_i2c_dev_id,
 };
@@ -2735,7 +2735,7 @@ static struct i2c_driver unittest_i2c_mux_driver = {
 	.driver = {
 		.name = "unittest-i2c-mux",
 	},
-	.probe_new = unittest_i2c_mux_probe,
+	.probe = unittest_i2c_mux_probe,
 	.remove = unittest_i2c_mux_remove,
 	.id_table = unittest_i2c_mux_id,
 };