arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM

Add TC9595 DSI-to-DPI and DSI-to-(e)DP bridge to
DH electronics i.MX8M Plus DHCOM SoM . The bridge
is populated on the SoM, but disabled by default
unless used for display output.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi

@@ -232,6 +232,36 @@ &i2c3 {
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
+	tc_bridge: bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		reg = <0xf>;
+		clock-names = "ref";
+		clocks = <&clk IMX8MP_CLK_CLKOUT2>;
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT2_SEL>,
+				  <&clk IMX8MP_CLK_CLKOUT2>,
+				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tc_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
 	pmic: pmic@25 {
 		compatible = "nxp,pca9450c";
 		reg = <0x25>;
@@ -398,6 +428,22 @@ &i2c5 {	/* HDMI EDID bus */
 	status = "okay";
 };
 
+&mipi_dsi {
+	samsung,burst-clock-frequency = <160000000>;
+	samsung,esc-clock-frequency = <10000000>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&tc_bridge_in>;
+			};
+		};
+	};
+};
+
 &pwm1 {
 	pinctrl-0 = <&pinctrl_pwm1>;
 	pinctrl-names = "default";
@@ -863,6 +909,15 @@ MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x40000080
 		>;
 	};
 
+	pinctrl_tc9595: dhcom-tc9595-grp {
+		fsl,pins = <
+			/* RESET_DSIBRIDGE */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000146
+			/* DSI-CONV_INT Interrupt */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x141
+		>;
+	};
+
 	pinctrl_touch: dhcom-touch-grp {
 		fsl,pins = <
 			/* #TOUCH_INT */