Commit 33dc2efd authored by Hans de Goede's avatar Hans de Goede

platform/x86: thinkpad_acpi: Make tpacpi_driver_event() return if it handled the event

tpacpi_driver_event() already only responds to hkey events which it knows
about. Make it return a bool and return true when it has handled the event.

This avoids the need to list TP_HKEY_EV_foo values to which it responds
both in its caller and in the function itself.

Instead callers can now call it unconditionally and check the return value.
Tested-by: default avatarMark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarMark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: default avatarIlpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-8-hdegoede@redhat.com
parent 9e5d6b98
......@@ -1918,7 +1918,7 @@ static u32 hotkey_acpi_mask; /* events enabled in firmware */
static u16 *hotkey_keycode_map;
static void tpacpi_driver_event(const unsigned int hkey_event);
static bool tpacpi_driver_event(const unsigned int hkey_event);
static void hotkey_driver_event(const unsigned int scancode);
static void hotkey_poll_setup(const bool may_warn);
......@@ -3726,13 +3726,8 @@ static bool adaptive_keyboard_hotkey_notify_hotkey(const u32 hkey)
static bool hotkey_notify_extended_hotkey(const u32 hkey)
{
switch (hkey) {
case TP_HKEY_EV_PRIVACYGUARD_TOGGLE:
case TP_HKEY_EV_AMT_TOGGLE:
case TP_HKEY_EV_PROFILE_TOGGLE:
tpacpi_driver_event(hkey);
if (tpacpi_driver_event(hkey))
return true;
}
if (hkey >= TP_HKEY_EV_EXTENDED_KEY_START &&
hkey <= TP_HKEY_EV_EXTENDED_KEY_END) {
......@@ -11081,24 +11076,28 @@ static struct platform_driver tpacpi_hwmon_pdriver = {
* HKEY event callout for other subdrivers go here
* (yes, it is ugly, but it is quick, safe, and gets the job done
*/
static void tpacpi_driver_event(const unsigned int hkey_event)
static bool tpacpi_driver_event(const unsigned int hkey_event)
{
if (ibm_backlight_device) {
switch (hkey_event) {
case TP_HKEY_EV_BRGHT_UP:
case TP_HKEY_EV_BRGHT_DOWN:
if (ibm_backlight_device)
tpacpi_brightness_notify_change();
}
}
if (alsa_card) {
switch (hkey_event) {
/*
* Key press events are suppressed by default hotkey_user_mask
* and should still be reported if explicitly requested.
*/
return false;
case TP_HKEY_EV_VOL_UP:
case TP_HKEY_EV_VOL_DOWN:
case TP_HKEY_EV_VOL_MUTE:
if (alsa_card)
volume_alsa_notify_change();
}
}
if (tp_features.kbdlight && hkey_event == TP_HKEY_EV_KBD_LIGHT) {
/* Key events are suppressed by default hotkey_user_mask */
return false;
case TP_HKEY_EV_KBD_LIGHT:
if (tp_features.kbdlight) {
enum led_brightness brightness;
mutex_lock(&kbdlight_mutex);
......@@ -11116,15 +11115,17 @@ static void tpacpi_driver_event(const unsigned int hkey_event)
mutex_unlock(&kbdlight_mutex);
}
if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) {
/* Key events are suppressed by default hotkey_user_mask */
return false;
case TP_HKEY_EV_THM_CSM_COMPLETED:
lapsensor_refresh();
/* If we are already accessing DYTC then skip dytc update */
if (!atomic_add_unless(&dytc_ignore_event, -1, 0))
dytc_profile_refresh();
}
if (lcdshadow_dev && hkey_event == TP_HKEY_EV_PRIVACYGUARD_TOGGLE) {
return true;
case TP_HKEY_EV_PRIVACYGUARD_TOGGLE:
if (lcdshadow_dev) {
enum drm_privacy_screen_status old_hw_state;
bool changed;
......@@ -11137,16 +11138,22 @@ static void tpacpi_driver_event(const unsigned int hkey_event)
if (changed)
drm_privacy_screen_call_notifier_chain(lcdshadow_dev);
}
if (hkey_event == TP_HKEY_EV_AMT_TOGGLE) {
return true;
case TP_HKEY_EV_AMT_TOGGLE:
/* If we're enabling AMT we need to force balanced mode */
if (!dytc_amt_active)
/* This will also set AMT mode enabled */
dytc_profile_set(NULL, PLATFORM_PROFILE_BALANCED);
else
dytc_control_amt(!dytc_amt_active);
}
if (hkey_event == TP_HKEY_EV_PROFILE_TOGGLE)
return true;
case TP_HKEY_EV_PROFILE_TOGGLE:
platform_profile_cycle();
return true;
}
return false;
}
static void hotkey_driver_event(const unsigned int scancode)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment