Commit 342b6b61 authored by Stefan Binding's avatar Stefan Binding Committed by Takashi Iwai

ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants

All current variants (Bullseye/Warlock/Cyborg) should be using
reduced volume (-6dB) for better speaker protection.

Refactor to make more explicit the meaning and setting of
Full Scale Volume setting to avoid future confusion.
Signed-off-by: default avatarStefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: default avatarVitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328115614.15761-4-vitalyr@opensource.cirrus.comSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent bdc159df
......@@ -733,6 +733,7 @@ static void cs42l42_resume(struct sub_codec *cs42l42)
{ 0x130A, 0x00 },
{ 0x130F, 0x00 },
};
int fsv_old, fsv_new;
/* Bring CS42L42 out of Reset */
gpio_data = snd_hda_codec_read(codec, CS8409_PIN_AFG, 0, AC_VERB_GET_GPIO_DATA, 0);
......@@ -749,8 +750,13 @@ static void cs42l42_resume(struct sub_codec *cs42l42)
/* Clear interrupts, by reading interrupt status registers */
cs8409_i2c_bulk_read(cs42l42, irq_regs, ARRAY_SIZE(irq_regs));
if (cs42l42->full_scale_vol)
cs8409_i2c_write(cs42l42, 0x2001, 0x01);
fsv_old = cs8409_i2c_read(cs42l42, 0x2001);
if (cs42l42->full_scale_vol == CS42L42_FULL_SCALE_VOL_0DB)
fsv_new = fsv_old & ~CS42L42_FULL_SCALE_VOL_MASK;
else
fsv_new = fsv_old & CS42L42_FULL_SCALE_VOL_MASK;
if (fsv_new != fsv_old)
cs8409_i2c_write(cs42l42, 0x2001, fsv_new);
/* we have to explicitly allow unsol event handling even during the
* resume phase so that the jack event is processed properly
......@@ -997,21 +1003,15 @@ void cs8409_cs42l42_fixups(struct hda_codec *codec, const struct hda_fixup *fix,
* Additionally set HSBIAS_SENSE_EN and Full Scale volume for some variants.
*/
switch (codec->fixup_id) {
case CS8409_WARLOCK:
spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0020;
spec->scodecs[CS8409_CODEC0]->full_scale_vol = 1;
break;
case CS8409_BULLSEYE:
spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0020;
spec->scodecs[CS8409_CODEC0]->full_scale_vol = 0;
break;
case CS8409_CYBORG:
spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x00a0;
spec->scodecs[CS8409_CODEC0]->full_scale_vol = 1;
spec->scodecs[CS8409_CODEC0]->full_scale_vol =
CS42L42_FULL_SCALE_VOL_MINUS6DB;
break;
default:
spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0003;
spec->scodecs[CS8409_CODEC0]->full_scale_vol = 1;
spec->scodecs[CS8409_CODEC0]->hsbias_hiz = 0x0020;
spec->scodecs[CS8409_CODEC0]->full_scale_vol =
CS42L42_FULL_SCALE_VOL_MINUS6DB;
break;
}
......@@ -1222,6 +1222,9 @@ void dolphin_fixups(struct hda_codec *codec, const struct hda_fixup *fix, int ac
cs8409_fix_caps(codec, DOLPHIN_LO_PIN_NID);
cs8409_fix_caps(codec, DOLPHIN_AMIC_PIN_NID);
spec->scodecs[CS8409_CODEC0]->full_scale_vol = CS42L42_FULL_SCALE_VOL_MINUS6DB;
spec->scodecs[CS8409_CODEC1]->full_scale_vol = CS42L42_FULL_SCALE_VOL_MINUS6DB;
break;
case HDA_FIXUP_ACT_PROBE:
/* Fix Sample Rate to 48kHz */
......
......@@ -235,6 +235,9 @@ enum cs8409_coefficient_index_registers {
#define CS42L42_I2C_SLEEP_US (2000)
#define CS42L42_PDN_TIMEOUT_US (250000)
#define CS42L42_PDN_SLEEP_US (2000)
#define CS42L42_FULL_SCALE_VOL_MASK (2)
#define CS42L42_FULL_SCALE_VOL_0DB (1)
#define CS42L42_FULL_SCALE_VOL_MINUS6DB (0)
/* Dell BULLSEYE / WARLOCK / CYBORG Specific Definitions */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment