arm64: rename stext to primary_entry

For historical reasons, the primary entry routine living somewhere in
the inittext section is called stext(), which is confusing, given that
there is also a section marker called _stext which lives at a fixed
offset in the image (either 64 or 4096 bytes, depending on whether
CONFIG_EFI is enabled)

Let's rename stext to primary_entry(), which is a better description
and reflects the secondary_entry() routine that already exists for
SMP boot.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200326171423.3080-1-ardb@kernel.orgReviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

arch/arm64/kernel/efi-entry.S

@@ -19,7 +19,7 @@ SYM_CODE_START(efi_enter_kernel)
 	 * point stored in x0. Save those values in registers which are
 	 * callee preserved.
 	 */
-	ldr	w2, =stext_offset
+	ldr	w2, =primary_entry_offset
 	add	x19, x0, x2		// relocated Image entrypoint
 	mov	x20, x1			// DTB address
 

arch/arm64/kernel/head.S

@@ -70,9 +70,9 @@ _head:
 	 * its opcode forms the magic "MZ" signature required by UEFI.
 	 */
 	add	x13, x18, #0x16
-	b	stext
+	b	primary_entry
 #else
-	b	stext				// branch to kernel start, magic
+	b	primary_entry			// branch to kernel start, magic
 	.long	0				// reserved
 #endif
 	le64sym	_kernel_offset_le		// Image load offset from start of RAM, little-endian
@@ -98,14 +98,13 @@ pe_header:
 	 * primary lowlevel boot path:
 	 *
 	 *  Register   Scope                      Purpose
-	 *  x21        stext() .. start_kernel()  FDT pointer passed at boot in x0
-	 *  x23        stext() .. start_kernel()  physical misalignment/KASLR offset
+	 *  x21        primary_entry() .. start_kernel()        FDT pointer passed at boot in x0
+	 *  x23        primary_entry() .. start_kernel()        physical misalignment/KASLR offset
 	 *  x28        __create_page_tables()                   callee preserved temp register
 	 *  x19/x20    __primary_switch()                       callee preserved temp registers
-	 *  x24        __primary_switch() .. relocate_kernel()
-	 *                                        current RELR displacement
+	 *  x24        __primary_switch() .. relocate_kernel()  current RELR displacement
 	 */
-SYM_CODE_START(stext)
+SYM_CODE_START(primary_entry)
 	bl	preserve_boot_args
 	bl	el2_setup			// Drop to EL1, w0=cpu_boot_mode
 	adrp	x23, __PHYS_OFFSET
@@ -121,7 +120,7 @@ SYM_CODE_START(stext)
 	mov	x0, #ARM64_CPU_BOOT_PRIMARY
 	bl	__cpu_setup			// initialise processor
 	b	__primary_switch
-SYM_CODE_END(stext)
+SYM_CODE_END(primary_entry)
 
 /*
  * Preserve the arguments passed by the bootloader in x0 .. x3

arch/arm64/kernel/image-vars.h

@@ -13,7 +13,7 @@
 #ifdef CONFIG_EFI
 
 __efistub_kernel_size		= _edata - _text;
-__efistub_stext_offset		= stext - _text;
+__efistub_primary_entry_offset	= primary_entry - _text;
 
 
 /*

arch/arm64/kernel/vmlinux.lds.S

@@ -72,8 +72,8 @@ jiffies = jiffies_64;
 
 /*
  * The size of the PE/COFF section that covers the kernel image, which
- * runs from stext to _edata, must be a round multiple of the PE/COFF
- * FileAlignment, which we set to its minimum value of 0x200. 'stext'
+ * runs from _stext to _edata, must be a round multiple of the PE/COFF
+ * FileAlignment, which we set to its minimum value of 0x200. '_stext'
  * itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
  * boundary should be sufficient.
  */