ARM: dts: imx53: Update USB configuration on M53Menlo

Turn USBH1 into Host and update the GPIO polarity of the
regulator to match new hardware.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -50,7 +50,8 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -268,8 +269,10 @@ MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
 
 		pinctrl_usb: usbgrp {
 			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x1d5
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1d5
+				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
+				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
+				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
 			>;
 		};
 	};
@@ -322,7 +325,7 @@ &usbh1 {
 	pinctrl-0 = <&pinctrl_usb>;
 	vbus-supply = <&reg_usbh1_vbus>;
 	phy_type = "utmi";
-	dr_mode = "peripheral";
+	dr_mode = "host";
 	status = "okay";
 };