Merge tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here is an overdue pull request for pin control fixes, the most
  prominent feature is to make Intel Chromebooks (and I suspect any
  other Cherryview-based Intel thing) happy again, which we really want
  to see.

  There is a patch hitting drivers/firmware/* that I was uncertain to
  who actually manages, but I got Andy Shevchenko's and Dmitry Torokov's
  review tags on it and I trust them both 100% to do the right thing for
  Intel platform drivers.

  Summary:

   - Make a few Intel Chromebooks with Cherryview DMI firmware work
     smoothly.

   - A fix for some bogus allocations in the generic group management
     code.

   - Some GPIO descriptor lookup table stubs. Merged through the pin
     control tree for administrative reasons.

   - Revert the "bi-directional" and "output-enable" generic properties:
     we need more discussions around this. It seems other SoCs are using
     input/output gate enablement and these terms are not correct.

   - Fix mux and drive strength atomically in the MXS driver.

   - Fix the SPDIF function on sunxi A83T.

   - OF table terminators and other small fixes"

* tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: Fix SPDIF function name for A83T
  pinctrl: mxs: atomically switch mux and drive strength config
  pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems
  firmware: dmi: Add DMI_PRODUCT_FAMILY identification string
  pinctrl: core: Fix warning by removing bogus code
  gpiolib: Add stubs for gpiod lookup table interface
  Revert "pinctrl: generic: Add bi-directional and output-enable"
  pinctrl: cherryview: Add terminate entry for dmi_system_id tables

Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

@@ -247,7 +247,6 @@ bias-bus-hold		- latch weakly
 bias-pull-up		- pull up the pin
 bias-pull-down		- pull down the pin
 bias-pull-pin-default	- use pin-default pull state
-bi-directional		- pin supports simultaneous input/output operations
 drive-push-pull		- drive actively high and low
 drive-open-drain	- drive with open drain
 drive-open-source	- drive with open source
@@ -260,7 +259,6 @@ input-debounce		- debounce mode with debound time X
 power-source		- select between different power supplies
 low-power-enable	- enable low power mode
 low-power-disable	- disable low power mode
-output-enable		- enable output on pin regardless of output value
 output-low		- set the pin to output mode with low level
 output-high		- set the pin to output mode with high level
 slew-rate		- set the slew rate

drivers/firmware/dmi-id.c

@@ -47,6 +47,7 @@ DEFINE_DMI_ATTR_WITH_SHOW(product_name,		0444, DMI_PRODUCT_NAME);
 DEFINE_DMI_ATTR_WITH_SHOW(product_version,	0444, DMI_PRODUCT_VERSION);
 DEFINE_DMI_ATTR_WITH_SHOW(product_serial,	0400, DMI_PRODUCT_SERIAL);
 DEFINE_DMI_ATTR_WITH_SHOW(product_uuid,		0400, DMI_PRODUCT_UUID);
+DEFINE_DMI_ATTR_WITH_SHOW(product_family,	0400, DMI_PRODUCT_FAMILY);
 DEFINE_DMI_ATTR_WITH_SHOW(board_vendor,		0444, DMI_BOARD_VENDOR);
 DEFINE_DMI_ATTR_WITH_SHOW(board_name,		0444, DMI_BOARD_NAME);
 DEFINE_DMI_ATTR_WITH_SHOW(board_version,	0444, DMI_BOARD_VERSION);
@@ -191,6 +192,7 @@ static void __init dmi_id_init_attr_table(void)
 	ADD_DMI_ATTR(product_version,   DMI_PRODUCT_VERSION);
 	ADD_DMI_ATTR(product_serial,    DMI_PRODUCT_SERIAL);
 	ADD_DMI_ATTR(product_uuid,      DMI_PRODUCT_UUID);
+	ADD_DMI_ATTR(product_family,      DMI_PRODUCT_FAMILY);
 	ADD_DMI_ATTR(board_vendor,      DMI_BOARD_VENDOR);
 	ADD_DMI_ATTR(board_name,        DMI_BOARD_NAME);
 	ADD_DMI_ATTR(board_version,     DMI_BOARD_VERSION);

drivers/firmware/dmi_scan.c

@@ -430,6 +430,7 @@ static void __init dmi_decode(const struct dmi_header *dm, void *dummy)
 		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
 		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
 		dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8);
+		dmi_save_ident(dm, DMI_PRODUCT_FAMILY, 26);
 		break;
 	case 2:		/* Base Board Information */
 		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);

drivers/pinctrl/core.c

@@ -680,30 +680,16 @@ EXPORT_SYMBOL_GPL(pinctrl_generic_remove_group);
  * pinctrl_generic_free_groups() - removes all pin groups
  * @pctldev: pin controller device
  *
- * Note that the caller must take care of locking.
+ * Note that the caller must take care of locking. The pinctrl groups
+ * are allocated with devm_kzalloc() so no need to free them here.
  */
 static void pinctrl_generic_free_groups(struct pinctrl_dev *pctldev)
 {
 	struct radix_tree_iter iter;
-	struct group_desc *group;
-	unsigned long *indices;
 	void **slot;
-	int i = 0;
-
-	indices = devm_kzalloc(pctldev->dev, sizeof(*indices) *
-			       pctldev->num_groups, GFP_KERNEL);
-	if (!indices)
-		return;
 
 	radix_tree_for_each_slot(slot, &pctldev->pin_group_tree, &iter, 0)
-		indices[i++] = iter.index;
-
-	for (i = 0; i < pctldev->num_groups; i++) {
-		group = radix_tree_lookup(&pctldev->pin_group_tree,
-					  indices[i]);
-		radix_tree_delete(&pctldev->pin_group_tree, indices[i]);
-		devm_kfree(pctldev->dev, group);
-	}
+		radix_tree_delete(&pctldev->pin_group_tree, iter.index);
 
 	pctldev->num_groups = 0;
 }

drivers/pinctrl/freescale/pinctrl-mxs.c

@@ -194,6 +194,16 @@ static int mxs_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static void mxs_pinctrl_rmwl(u32 value, u32 mask, u8 shift, void __iomem *reg)
+{
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp &= ~(mask << shift);
+	tmp |= value << shift;
+	writel(tmp, reg);
+}
+
 static int mxs_pinctrl_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
 			       unsigned group)
 {
@@ -211,8 +221,7 @@ static int mxs_pinctrl_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
 		reg += bank * 0x20 + pin / 16 * 0x10;
 		shift = pin % 16 * 2;
 
-		writel(0x3 << shift, reg + CLR);
-		writel(g->muxsel[i] << shift, reg + SET);
+		mxs_pinctrl_rmwl(g->muxsel[i], 0x3, shift, reg);
 	}
 
 	return 0;
@@ -279,8 +288,7 @@ static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev,
 			/* mA */
 			if (config & MA_PRESENT) {
 				shift = pin % 8 * 4;
-				writel(0x3 << shift, reg + CLR);
-				writel(ma << shift, reg + SET);
+				mxs_pinctrl_rmwl(ma, 0x3, shift, reg);
 			}
 
 			/* vol */

drivers/pinctrl/intel/pinctrl-cherryview.c

@@ -1539,15 +1539,29 @@ static void chv_gpio_irq_handler(struct irq_desc *desc)
  * is not listed below.
  */
 static const struct dmi_system_id chv_no_valid_mask[] = {
-	{
 	/* See https://bugzilla.kernel.org/show_bug.cgi?id=194945 */
-		.ident = "Acer Chromebook (CYAN)",
+	{
+		.ident = "Intel_Strago based Chromebooks (All models)",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Edgar"),
-			DMI_MATCH(DMI_BIOS_DATE, "05/21/2016"),
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"),
 		},
-	}
+	},
+	{
+		.ident = "Acer Chromebook R11 (Cyan)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"),
+		},
+	},
+	{
+		.ident = "Samsung Chromebook 3 (Celes)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Celes"),
+		},
+	},
+	{}
 };
 
 static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)

drivers/pinctrl/pinconf-generic.c

@@ -35,7 +35,6 @@ static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
 				"input bias pull to pin specific state", NULL, false),
 	PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false),
-	PCONFDUMP(PIN_CONFIG_BIDIRECTIONAL, "bi-directional pin operations", NULL, false),
 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false),
 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false),
 	PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false),
@@ -161,7 +160,6 @@ static const struct pinconf_generic_params dt_params[] = {
 	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
 	{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
 	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
-	{ "bi-directional", PIN_CONFIG_BIDIRECTIONAL, 1 },
 	{ "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 },
 	{ "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 },
 	{ "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 },
@@ -174,7 +172,6 @@ static const struct pinconf_generic_params dt_params[] = {
 	{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
 	{ "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 },
 	{ "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 },
-	{ "output-enable", PIN_CONFIG_OUTPUT, 1, },
 	{ "output-high", PIN_CONFIG_OUTPUT, 1, },
 	{ "output-low", PIN_CONFIG_OUTPUT, 0, },
 	{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },

drivers/pinctrl/pinmux.c

@@ -826,30 +826,17 @@ EXPORT_SYMBOL_GPL(pinmux_generic_remove_function);
  * pinmux_generic_free_functions() - removes all functions
  * @pctldev: pin controller device
  *
- * Note that the caller must take care of locking.
+ * Note that the caller must take care of locking. The pinctrl
+ * functions are allocated with devm_kzalloc() so no need to free
+ * them here.
  */
 void pinmux_generic_free_functions(struct pinctrl_dev *pctldev)
 {
 	struct radix_tree_iter iter;
-	struct function_desc *function;
-	unsigned long *indices;
 	void **slot;
-	int i = 0;
-
-	indices = devm_kzalloc(pctldev->dev, sizeof(*indices) *
-			       pctldev->num_functions, GFP_KERNEL);
-	if (!indices)
-		return;
 
 	radix_tree_for_each_slot(slot, &pctldev->pin_function_tree, &iter, 0)
-		indices[i++] = iter.index;
-
-	for (i = 0; i < pctldev->num_functions; i++) {
-		function = radix_tree_lookup(&pctldev->pin_function_tree,
-					     indices[i]);
-		radix_tree_delete(&pctldev->pin_function_tree, indices[i]);
-		devm_kfree(pctldev->dev, function);
-	}
+		radix_tree_delete(&pctldev->pin_function_tree, iter.index);
 
 	pctldev->num_functions = 0;
 }

drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c

@@ -394,7 +394,7 @@ static const struct sunxi_desc_pin sun8i_a83t_pins[] = {
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 18),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x3, "owa")),		/* DOUT */
+		  SUNXI_FUNCTION(0x3, "spdif")),	/* DOUT */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 19),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out")),

include/linux/gpio/machine.h

@@ -56,7 +56,14 @@ struct gpiod_lookup_table {
 	.flags = _flags,                                                  \
 }
 
+#ifdef CONFIG_GPIOLIB
 void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
 void gpiod_remove_lookup_table(struct gpiod_lookup_table *table);
+#else
+static inline
+void gpiod_add_lookup_table(struct gpiod_lookup_table *table) {}
+static inline
+void gpiod_remove_lookup_table(struct gpiod_lookup_table *table) {}
+#endif
 
 #endif /* __LINUX_GPIO_MACHINE_H */

include/linux/mod_devicetable.h

@@ -467,6 +467,7 @@ enum dmi_field {
 	DMI_PRODUCT_VERSION,
 	DMI_PRODUCT_SERIAL,
 	DMI_PRODUCT_UUID,
+	DMI_PRODUCT_FAMILY,
 	DMI_BOARD_VENDOR,
 	DMI_BOARD_NAME,
 	DMI_BOARD_VERSION,

include/linux/pinctrl/pinconf-generic.h

@@ -42,8 +42,6 @@
  * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high
  *	impedance to VDD). If the argument is != 0 pull-up is enabled,
  *	if it is 0, pull-up is total, i.e. the pin is connected to VDD.
- * @PIN_CONFIG_BIDIRECTIONAL: the pin will be configured to allow simultaneous
- *	input and output operations.
  * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
  *	collector) which means it is usually wired with other output ports
  *	which are then pulled up with an external resistor. Setting this
@@ -98,7 +96,6 @@ enum pin_config_param {
 	PIN_CONFIG_BIAS_PULL_DOWN,
 	PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
 	PIN_CONFIG_BIAS_PULL_UP,
-	PIN_CONFIG_BIDIRECTIONAL,
 	PIN_CONFIG_DRIVE_OPEN_DRAIN,
 	PIN_CONFIG_DRIVE_OPEN_SOURCE,
 	PIN_CONFIG_DRIVE_PUSH_PULL,