arm64: dts: imx8mp-evk: Add MX8-DLVDS-LCD1 display module support

MX8-DLVDS-LCD1 display module integrates a KOE TX26D202VM0BWA LCD panel
and a touch IC.  Add an overlay to support the LCD panel on i.MX8MP EVK.
Specify 148.5MHz clock frequency in panel-timing node to accommodate
3.5-fold 519.75MHz media_ldb clock which is derived from 1.0395GHz
video_pll1 clock.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/Makefile

@@ -191,6 +191,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 
+imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb
+
 imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
 imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb

arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	panel-lvds {
+		compatible = "koe,tx26d202vm0bwa";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vext_3v3>;
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1200>;
+			hfront-porch = <130>;
+			hback-porch = <70>;
+			hsync-len = <30>;
+			vfront-porch = <5>;
+			vback-porch = <5>;
+			vsync-len = <5>;
+			de-active = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+
+				panel_in_odd: endpoint {
+					remote-endpoint = <&ldb_lvds_ch0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+
+				panel_in_even: endpoint {
+					remote-endpoint = <&ldb_lvds_ch1>;
+				};
+			};
+		};
+	};
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_odd>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_even>;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/freescale/imx8mp-evk.dts

@@ -16,6 +16,16 @@ chosen {
 		stdout-path = &uart2;
 	};
 
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		power-supply = <&reg_per_12v>;
+		status = "disabled";
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -96,6 +106,15 @@ reg_pcie0: regulator-pcie {
 		enable-active-high;
 	};
 
+	reg_per_12v: regulator-per-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "PER_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca6416 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";