Merge tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:

 - switch xtensa arch to the generic noncoherent direct mapping
   operations

 - add support for DMA_ATTR_NO_KERNEL_MAPPING attribute

 - clean up users of platform/hardware.h in generic Xtensa code

 - fix assembly cache maintenance code for long cache lines

 - rework noMMU cache attributes initialization

 - add big-endian HiFi2 test_kc705_be CPU variant

* tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add test_kc705_be variant
  xtensa: clean up boot-elf/bootstrap.S
  xtensa: make bootparam parsing optional
  xtensa: drop variant IRQ support
  xtensa: drop unneeded platform/hardware.h headers
  xtensa: move PLATFORM_NR_IRQS to Kconfig
  xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_START
  xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZE
  xtensa: rework noMMU cache attributes initialization
  xtensa: increase ranges in ___invalidate_{i,d}cache_all
  xtensa: limit offsets in __loop_cache_{all,page}
  xtensa: platform-specific handling of coherent memory
  xtensa: support DMA_ATTR_NO_KERNEL_MAPPING attribute
  xtensa: use generic dma_noncoherent_ops

arch/xtensa/Kconfig

@@ -4,12 +4,15 @@ config ZONE_DMA
 
 config XTENSA
 	def_bool y
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_NO_COHERENT_DMA_MMAP if !MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
+	select DMA_NONCOHERENT_OPS
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_SHOW
@@ -72,9 +75,6 @@ config TRACE_IRQFLAGS_SUPPORT
 config MMU
 	def_bool n
 
-config VARIANT_IRQ_SWITCH
-	def_bool n
-
 config HAVE_XTENSA_GPIO32
 	def_bool n
 
@@ -244,6 +244,23 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 
 	  If in doubt, say Y.
 
+config MEMMAP_CACHEATTR
+	hex "Cache attributes for the memory address space"
+	depends on !MMU
+	default 0x22222222
+	help
+	  These cache attributes are set up for noMMU systems. Each hex digit
+	  specifies cache attributes for the corresponding 512MB memory
+	  region: bits 0..3 -- for addresses 0x00000000..0x1fffffff,
+	  bits 4..7 -- for addresses 0x20000000..0x3fffffff, and so on.
+
+	  Cache attribute values are specific for the MMU type, so e.g.
+	  for region protection MMUs: 2 is cache bypass, 4 is WB cached,
+	  1 is WT cached, f is illegal. For ful MMU: bit 0 makes it executable,
+	  bit 1 makes it writable, bits 2..3 meaning is 0: cache bypass,
+	  1: WB cache, 2: WT cache, 3: special (c and e are illegal, f is
+	  reserved).
+
 config KSEG_PADDR
 	hex "Physical address of the KSEG mapping"
 	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU
@@ -413,6 +430,10 @@ config XTENSA_PLATFORM_XTFPGA
 
 endchoice
 
+config PLATFORM_NR_IRQS
+	int
+	default 3 if XTENSA_PLATFORM_XT2000
+	default 0
 
 config XTENSA_CPU_CLOCK
 	int "CPU clock rate [MHz]"
@@ -450,6 +471,15 @@ config BUILTIN_DTB
 	string "DTB to build into the kernel image"
 	depends on OF
 
+config PARSE_BOOTPARAM
+	bool "Parse bootparam block"
+	default y
+	help
+	  Parse parameters passed to the kernel from the bootloader. It may
+	  be disabled if the kernel is known to run without the bootloader.
+
+	  If unsure, say Y.
+
 config BLK_DEV_SIMDISK
 	tristate "Host file-based simulated block device support"
 	default n
@@ -506,25 +536,13 @@ config PLATFORM_WANT_DEFAULT_MEM
 	def_bool n
 
 config DEFAULT_MEM_START
-	hex "Physical address of the default memory area start"
-	depends on PLATFORM_WANT_DEFAULT_MEM
-	default 0x00000000 if MMU
-	default 0x60000000 if !MMU
-	help
-	  This is the base address of the default memory area.
-	  Default memory area has platform-specific meaning, it may be used
-	  for e.g. early cache initialization.
-
-	  If unsure, leave the default value here.
-
-config DEFAULT_MEM_SIZE
-	hex "Maximal size of the default memory area"
-	depends on PLATFORM_WANT_DEFAULT_MEM
-	default 0x04000000
+	hex
+	prompt "PAGE_OFFSET/PHYS_OFFSET" if !MMU && PLATFORM_WANT_DEFAULT_MEM
+	default 0x60000000 if PLATFORM_WANT_DEFAULT_MEM
+	default 0x00000000
 	help
-	  This is the size of the default memory area.
-	  Default memory area has platform-specific meaning, it may be used
-	  for e.g. early cache initialization.
+	  This is the base address used for both PAGE_OFFSET and PHYS_OFFSET
+	  in noMMU configurations.
 
 	  If unsure, leave the default value here.
 

arch/xtensa/boot/boot-elf/bootstrap.S

@@ -15,10 +15,6 @@
  */
 
 #include <asm/bootparam.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/cacheasm.h>
 #include <asm/initialize_mmu.h>
 #include <asm/vectors.h>
 #include <linux/linkage.h>
@@ -33,16 +29,18 @@ _ResetVector:
 	.begin  no-absolute-literals
 	.literal_position
 
-	.align 4
-RomInitAddr:
 #if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \
 	XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
-	.word	CONFIG_KERNEL_LOAD_ADDRESS
+	.literal RomInitAddr, CONFIG_KERNEL_LOAD_ADDRESS
 #else
-	.word	KERNELOFFSET
+	.literal RomInitAddr, KERNELOFFSET
 #endif
-RomBootParam:
-	.word _bootparam
+#ifndef CONFIG_PARSE_BOOTPARAM
+	.literal RomBootParam, 0
+#else
+	.literal RomBootParam, _bootparam
+
+	.align 4
 _bootparam:
 	.short	BP_TAG_FIRST
 	.short	4
@@ -50,6 +48,7 @@ _bootparam:
 	.short	BP_TAG_LAST
 	.short	0
 	.long	0
+#endif
 
 	.align  4
 _SetupMMU:

arch/xtensa/configs/nommu_kc705_defconfig

@@ -33,13 +33,13 @@ CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212"
 # CONFIG_XTENSA_VARIANT_MMU is not set
 CONFIG_XTENSA_UNALIGNED_USER=y
 CONFIG_PREEMPT=y
+CONFIG_MEMMAP_CACHEATTR=0xfff2442f
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@0x60000000"
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB="kc705_nommu"
-CONFIG_DEFAULT_MEM_SIZE=0x10000000
 CONFIG_BINFMT_FLAT=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/xtensa/include/asm/Kbuild

@@ -3,6 +3,7 @@ generic-y += compat.h
 generic-y += device.h
 generic-y += div64.h
 generic-y += dma-contiguous.h
+generic-y += dma-mapping.h
 generic-y += emergency-restart.h
 generic-y += exec.h
 generic-y += extable.h

arch/xtensa/include/asm/cacheasm.h

@@ -31,16 +31,32 @@
  *
  */
 
-	.macro	__loop_cache_all ar at insn size line_width
 
-	movi	\ar, 0
+	.macro	__loop_cache_unroll ar at insn size line_width max_immed
+
+	.if	(1 << (\line_width)) > (\max_immed)
+	.set	_reps, 1
+	.elseif	(2 << (\line_width)) > (\max_immed)
+	.set	_reps, 2
+	.else
+	.set	_reps, 4
+	.endif
+
+	__loopi	\ar, \at, \size, (_reps << (\line_width))
+	.set	_index, 0
+	.rep	_reps
+	\insn	\ar, _index << (\line_width)
+	.set	_index, _index + 1
+	.endr
+	__endla	\ar, \at, _reps << (\line_width)
+
+	.endm
+
 
-	__loopi	\ar, \at, \size, (4 << (\line_width))
-	\insn	\ar, 0 << (\line_width)
-	\insn	\ar, 1 << (\line_width)
-	\insn	\ar, 2 << (\line_width)
-	\insn	\ar, 3 << (\line_width)
-	__endla	\ar, \at, 4 << (\line_width)
+	.macro	__loop_cache_all ar at insn size line_width max_immed
+
+	movi	\ar, 0
+	__loop_cache_unroll \ar, \at, \insn, \size, \line_width, \max_immed
 
 	.endm
 
@@ -57,14 +73,9 @@
 	.endm
 
 
-	.macro	__loop_cache_page ar at insn line_width
+	.macro	__loop_cache_page ar at insn line_width max_immed
 
-	__loopi	\ar, \at, PAGE_SIZE, 4 << (\line_width)
-	\insn	\ar, 0 << (\line_width)
-	\insn	\ar, 1 << (\line_width)
-	\insn	\ar, 2 << (\line_width)
-	\insn	\ar, 3 << (\line_width)
-	__endla	\ar, \at, 4 << (\line_width)
+	__loop_cache_unroll \ar, \at, \insn, PAGE_SIZE, \line_width, \max_immed
 
 	.endm
 
@@ -72,7 +83,8 @@
 	.macro	___unlock_dcache_all ar at
 
 #if XCHAL_DCACHE_LINE_LOCKABLE && XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -81,7 +93,8 @@
 	.macro	___unlock_icache_all ar at
 
 #if XCHAL_ICACHE_LINE_LOCKABLE && XCHAL_ICACHE_SIZE
-	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE \
+		XCHAL_ICACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -90,7 +103,8 @@
 	.macro	___flush_invalidate_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -99,7 +113,8 @@
 	.macro	___flush_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -108,8 +123,8 @@
 	.macro	___invalidate_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
-			 XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at dii XCHAL_DCACHE_SIZE \
+			 XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -118,8 +133,8 @@
 	.macro	___invalidate_icache_all ar at
 
 #if XCHAL_ICACHE_SIZE
-	__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
-			 XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_all \ar \at iii XCHAL_ICACHE_SIZE \
+			 XCHAL_ICACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -166,7 +181,7 @@
 	.macro	___flush_invalidate_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -175,7 +190,7 @@
 	.macro ___flush_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -184,7 +199,7 @@
 	.macro	___invalidate_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -193,7 +208,7 @@
 	.macro	___invalidate_icache_page ar as
 
 #if XCHAL_ICACHE_SIZE
-	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH 1020
 #endif
 
 	.endm

arch/xtensa/include/asm/dma-mapping.h

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 - 2005 Tensilica Inc.
- * Copyright (C) 2015 Cadence Design Systems Inc.
- */
-
-#ifndef _XTENSA_DMA_MAPPING_H
-#define _XTENSA_DMA_MAPPING_H
-
-#include <asm/cache.h>
-#include <asm/io.h>
-
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-
-extern const struct dma_map_ops xtensa_dma_map_ops;
-
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
-{
-	return &xtensa_dma_map_ops;
-}
-
-#endif	/* _XTENSA_DMA_MAPPING_H */

arch/xtensa/include/asm/initialize_mmu.h

@@ -177,36 +177,36 @@
 #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
 	  XCHAL_HAVE_SPANNING_WAY */
 
-#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \
-		(XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE)
-	/* Enable data and instruction cache in the DEFAULT_MEMORY region
-	 * if the processor has DTLB and ITLB.
-	 */
+	.endm
+
+	.macro	initialize_cacheattr
 
-	movi	a5, PLATFORM_DEFAULT_MEM_START | XCHAL_SPANNING_WAY
+#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS
+#if CONFIG_MEMMAP_CACHEATTR == 0x22222222 && XCHAL_HAVE_PTP_MMU
+#error Default MEMMAP_CACHEATTR of 0x22222222 does not work with full MMU.
+#endif
+
+	movi	a5, XCHAL_SPANNING_WAY
 	movi	a6, ~_PAGE_ATTRIB_MASK
-	movi	a7, CA_WRITEBACK
+	movi	a4, CONFIG_MEMMAP_CACHEATTR
 	movi	a8, 0x20000000
-	movi	a9, PLATFORM_DEFAULT_MEM_SIZE
-	j	2f
 1:
-	sub	a9, a9, a8
-2:
-#if XCHAL_DCACHE_SIZE
 	rdtlb1	a3, a5
+	xor	a3, a3, a4
 	and	a3, a3, a6
-	or	a3, a3, a7
+	xor	a3, a3, a4
 	wdtlb	a3, a5
-#endif
-#if XCHAL_ICACHE_SIZE
-	ritlb1	a4, a5
-	and	a4, a4, a6
-	or	a4, a4, a7
-	witlb	a4, a5
-#endif
+	ritlb1	a3, a5
+	xor	a3, a3, a4
+	and	a3, a3, a6
+	xor	a3, a3, a4
+	witlb	a3, a5
+
 	add	a5, a5, a8
-	bltu	a8, a9, 1b
+	srli	a4, a4, 4
+	bgeu	a5, a8, 1b
 
+	isync
 #endif
 
 	.endm

arch/xtensa/include/asm/irq.h

@@ -12,32 +12,17 @@
 #define _XTENSA_IRQ_H
 
 #include <linux/init.h>
-#include <platform/hardware.h>
 #include <variant/core.h>
 
-#ifdef CONFIG_VARIANT_IRQ_SWITCH
-#include <variant/irq.h>
+#ifdef CONFIG_PLATFORM_NR_IRQS
+# define PLATFORM_NR_IRQS CONFIG_PLATFORM_NR_IRQS
 #else
-static inline void variant_irq_enable(unsigned int irq) { }
-static inline void variant_irq_disable(unsigned int irq) { }
-#endif
-
-#ifndef VARIANT_NR_IRQS
-# define VARIANT_NR_IRQS 0
-#endif
-#ifndef PLATFORM_NR_IRQS
 # define PLATFORM_NR_IRQS 0
 #endif
 #define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS
-#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS + 1)
+#define NR_IRQS (XTENSA_NR_IRQS + PLATFORM_NR_IRQS + 1)
 #define XTENSA_PIC_LINUX_IRQ(hwirq) ((hwirq) + 1)
 
-#if VARIANT_NR_IRQS == 0
-static inline void variant_init_irq(void) { }
-#else
-void variant_init_irq(void) __init;
-#endif
-
 static __inline__ int irq_canonicalize(int irq)
 {
 	return (irq);

arch/xtensa/include/asm/kmem_layout.h

@@ -63,12 +63,6 @@
 #error XCHAL_KSEG_PADDR is not properly aligned to XCHAL_KSEG_ALIGNMENT
 #endif
 
-#else
-
-#define XCHAL_KSEG_CACHED_VADDR	__XTENSA_UL_CONST(0xd0000000)
-#define XCHAL_KSEG_BYPASS_VADDR	__XTENSA_UL_CONST(0xd8000000)
-#define XCHAL_KSEG_SIZE		__XTENSA_UL_CONST(0x08000000)
-
 #endif
 
 #ifndef CONFIG_KASAN

arch/xtensa/include/asm/page.h

@@ -14,7 +14,6 @@
 #include <asm/processor.h>
 #include <asm/types.h>
 #include <asm/cache.h>
-#include <platform/hardware.h>
 #include <asm/kmem_layout.h>
 
 /*
@@ -31,8 +30,8 @@
 #define MAX_LOW_PFN	(PHYS_PFN(XCHAL_KSEG_PADDR) + \
 			 PHYS_PFN(XCHAL_KSEG_SIZE))
 #else
-#define PAGE_OFFSET	PLATFORM_DEFAULT_MEM_START
-#define PHYS_OFFSET	PLATFORM_DEFAULT_MEM_START
+#define PAGE_OFFSET	_AC(CONFIG_DEFAULT_MEM_START, UL)
+#define PHYS_OFFSET	_AC(CONFIG_DEFAULT_MEM_START, UL)
 #define MAX_LOW_PFN	PHYS_PFN(0xfffffffful)
 #endif
 

arch/xtensa/include/asm/pgtable.h

@@ -66,6 +66,7 @@
 #define FIRST_USER_ADDRESS	0UL
 #define FIRST_USER_PGD_NR	(FIRST_USER_ADDRESS >> PGDIR_SHIFT)
 
+#ifdef CONFIG_MMU
 /*
  * Virtual memory area. We keep a distance to other memory regions to be
  * on the safe side. We also use this area for cache aliasing.
@@ -80,6 +81,13 @@
 #define TLBTEMP_SIZE		ICACHE_WAY_SIZE
 #endif
 
+#else
+
+#define VMALLOC_START		__XTENSA_UL_CONST(0)
+#define VMALLOC_END		__XTENSA_UL_CONST(0xffffffff)
+
+#endif
+
 /*
  * For the Xtensa architecture, the PTE layout is as follows:
  *

arch/xtensa/include/asm/platform.h

@@ -75,4 +75,31 @@ extern void platform_calibrate_ccount (void);
  */
 void cpu_reset(void) __attribute__((noreturn));
 
+/*
+ * Memory caching is platform-dependent in noMMU xtensa configurations.
+ * The following set of functions should be implemented in platform code
+ * in order to enable coherent DMA memory operations when CONFIG_MMU is not
+ * enabled. Default implementations do nothing and issue a warning.
+ */
+
+/*
+ * Check whether p points to a cached memory.
+ */
+bool platform_vaddr_cached(const void *p);
+
+/*
+ * Check whether p points to an uncached memory.
+ */
+bool platform_vaddr_uncached(const void *p);
+
+/*
+ * Return pointer to an uncached view of the cached sddress p.
+ */
+void *platform_vaddr_to_uncached(void *p);
+
+/*
+ * Return pointer to a cached view of the uncached sddress p.
+ */
+void *platform_vaddr_to_cached(void *p);
+
 #endif	/* _XTENSA_PLATFORM_H */

arch/xtensa/include/asm/processor.h

@@ -11,7 +11,6 @@
 #define _XTENSA_PROCESSOR_H
 
 #include <variant/core.h>
-#include <platform/hardware.h>
 
 #include <linux/compiler.h>
 #include <asm/ptrace.h>

arch/xtensa/include/asm/vectors.h

@@ -19,7 +19,6 @@
 #define _XTENSA_VECTORS_H
 
 #include <variant/core.h>
-#include <platform/hardware.h>
 #include <asm/kmem_layout.h>
 
 #if XCHAL_HAVE_PTP_MMU

arch/xtensa/kernel/head.S

@@ -181,6 +181,8 @@ ENTRY(_startup)
 
 	isync
 
+	initialize_cacheattr
+
 #ifdef CONFIG_HAVE_SMP
 	movi	a2, CCON	# MX External Register to Configure Cache
 	movi	a3, 1

arch/xtensa/kernel/irq.c

@@ -158,7 +158,6 @@ void __init init_IRQ(void)
 #ifdef CONFIG_SMP
 	ipi_init();
 #endif
-	variant_init_irq();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

arch/xtensa/kernel/pci-dma.c

@@ -16,26 +16,25 @@
  */
 
 #include <linux/dma-contiguous.h>
+#include <linux/dma-noncoherent.h>
 #include <linux/dma-direct.h>
 #include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/string.h>
 #include <linux/types.h>
 #include <asm/cacheflush.h>
 #include <asm/io.h>
+#include <asm/platform.h>
 
-static void do_cache_op(dma_addr_t dma_handle, size_t size,
+static void do_cache_op(phys_addr_t paddr, size_t size,
 			void (*fn)(unsigned long, unsigned long))
 {
-	unsigned long off = dma_handle & (PAGE_SIZE - 1);
-	unsigned long pfn = PFN_DOWN(dma_handle);
+	unsigned long off = paddr & (PAGE_SIZE - 1);
+	unsigned long pfn = PFN_DOWN(paddr);
 	struct page *page = pfn_to_page(pfn);
 
 	if (!PageHighMem(page))
-		fn((unsigned long)bus_to_virt(dma_handle), size);
+		fn((unsigned long)phys_to_virt(paddr), size);
 	else
 		while (size > 0) {
 			size_t sz = min_t(size_t, size, PAGE_SIZE - off);
@@ -49,14 +48,13 @@ static void do_cache_op(dma_addr_t dma_handle, size_t size,
 		}
 }
 
-static void xtensa_sync_single_for_cpu(struct device *dev,
-				       dma_addr_t dma_handle, size_t size,
-				       enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
 	case DMA_FROM_DEVICE:
-		do_cache_op(dma_handle, size, __invalidate_dcache_range);
+		do_cache_op(paddr, size, __invalidate_dcache_range);
 		break;
 
 	case DMA_NONE:
@@ -68,15 +66,14 @@ static void xtensa_sync_single_for_cpu(struct device *dev,
 	}
 }
 
-static void xtensa_sync_single_for_device(struct device *dev,
-					  dma_addr_t dma_handle, size_t size,
-					  enum dma_data_direction dir)
+void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
 	case DMA_TO_DEVICE:
 		if (XCHAL_DCACHE_IS_WRITEBACK)
-			do_cache_op(dma_handle, size, __flush_dcache_range);
+			do_cache_op(paddr, size, __flush_dcache_range);
 		break;
 
 	case DMA_NONE:
@@ -88,43 +85,66 @@ static void xtensa_sync_single_for_device(struct device *dev,
 	}
 }
 
-static void xtensa_sync_sg_for_cpu(struct device *dev,
-				   struct scatterlist *sg, int nents,
-				   enum dma_data_direction dir)
+#ifdef CONFIG_MMU
+bool platform_vaddr_cached(const void *p)
 {
-	struct scatterlist *s;
-	int i;
+	unsigned long addr = (unsigned long)p;
 
-	for_each_sg(sg, s, nents, i) {
-		xtensa_sync_single_for_cpu(dev, sg_dma_address(s),
-					   sg_dma_len(s), dir);
-	}
+	return addr >= XCHAL_KSEG_CACHED_VADDR &&
+	       addr - XCHAL_KSEG_CACHED_VADDR < XCHAL_KSEG_SIZE;
 }
 
-static void xtensa_sync_sg_for_device(struct device *dev,
-				      struct scatterlist *sg, int nents,
-				      enum dma_data_direction dir)
+bool platform_vaddr_uncached(const void *p)
 {
-	struct scatterlist *s;
-	int i;
+	unsigned long addr = (unsigned long)p;
 
-	for_each_sg(sg, s, nents, i) {
-		xtensa_sync_single_for_device(dev, sg_dma_address(s),
-					      sg_dma_len(s), dir);
-	}
+	return addr >= XCHAL_KSEG_BYPASS_VADDR &&
+	       addr - XCHAL_KSEG_BYPASS_VADDR < XCHAL_KSEG_SIZE;
+}
+
+void *platform_vaddr_to_uncached(void *p)
+{
+	return p + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR;
+}
+
+void *platform_vaddr_to_cached(void *p)
+{
+	return p + XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
+}
+#else
+bool __attribute__((weak)) platform_vaddr_cached(const void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return true;
+}
+
+bool __attribute__((weak)) platform_vaddr_uncached(const void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return false;
+}
+
+void __attribute__((weak)) *platform_vaddr_to_uncached(void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return p;
+}
+
+void __attribute__((weak)) *platform_vaddr_to_cached(void *p)
+{
+	WARN_ONCE(1, "Default %s implementation is used\n", __func__);
+	return p;
 }
+#endif
 
 /*
  * Note: We assume that the full memory space is always mapped to 'kseg'
  *	 Otherwise we have to use page attributes (not implemented).
  */
 
-static void *xtensa_dma_alloc(struct device *dev, size_t size,
-			      dma_addr_t *handle, gfp_t flag,
-			      unsigned long attrs)
+void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+		gfp_t flag, unsigned long attrs)
 {
-	unsigned long ret;
-	unsigned long uncached;
 	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	struct page *page = NULL;
 
@@ -147,6 +167,10 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size,
 
 	*handle = phys_to_dma(dev, page_to_phys(page));
 
+	if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) {
+		return page;
+	}
+
 #ifdef CONFIG_MMU
 	if (PageHighMem(page)) {
 		void *p;
@@ -161,27 +185,21 @@ static void *xtensa_dma_alloc(struct device *dev, size_t size,
 		return p;
 	}
 #endif
-	ret = (unsigned long)page_address(page);
-	BUG_ON(ret < XCHAL_KSEG_CACHED_VADDR ||
-	       ret > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
-
-	uncached = ret + XCHAL_KSEG_BYPASS_VADDR - XCHAL_KSEG_CACHED_VADDR;
-	__invalidate_dcache_range(ret, size);
-
-	return (void *)uncached;
+	BUG_ON(!platform_vaddr_cached(page_address(page)));
+	__invalidate_dcache_range((unsigned long)page_address(page), size);
+	return platform_vaddr_to_uncached(page_address(page));
 }
 
-static void xtensa_dma_free(struct device *dev, size_t size, void *vaddr,
-			    dma_addr_t dma_handle, unsigned long attrs)
+void arch_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, unsigned long attrs)
 {
 	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	unsigned long addr = (unsigned long)vaddr;
 	struct page *page;
 
-	if (addr >= XCHAL_KSEG_BYPASS_VADDR &&
-	    addr - XCHAL_KSEG_BYPASS_VADDR < XCHAL_KSEG_SIZE) {
-		addr += XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
-		page = virt_to_page(addr);
+	if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) {
+		page = vaddr;
+	} else if (platform_vaddr_uncached(vaddr)) {
+		page = virt_to_page(platform_vaddr_to_cached(vaddr));
 	} else {
 #ifdef CONFIG_MMU
 		dma_common_free_remap(vaddr, size, VM_MAP);
@@ -192,72 +210,3 @@ static void xtensa_dma_free(struct device *dev, size_t size, void *vaddr,
 	if (!dma_release_from_contiguous(dev, page, count))
 		__free_pages(page, get_order(size));
 }
-
-static dma_addr_t xtensa_map_page(struct device *dev, struct page *page,
-				  unsigned long offset, size_t size,
-				  enum dma_data_direction dir,
-				  unsigned long attrs)
-{
-	dma_addr_t dma_handle = page_to_phys(page) + offset;
-
-	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xtensa_sync_single_for_device(dev, dma_handle, size, dir);
-
-	return dma_handle;
-}
-
-static void xtensa_unmap_page(struct device *dev, dma_addr_t dma_handle,
-			      size_t size, enum dma_data_direction dir,
-			      unsigned long attrs)
-{
-	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		xtensa_sync_single_for_cpu(dev, dma_handle, size, dir);
-}
-
-static int xtensa_map_sg(struct device *dev, struct scatterlist *sg,
-			 int nents, enum dma_data_direction dir,
-			 unsigned long attrs)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i) {
-		s->dma_address = xtensa_map_page(dev, sg_page(s), s->offset,
-						 s->length, dir, attrs);
-	}
-	return nents;
-}
-
-static void xtensa_unmap_sg(struct device *dev,
-			    struct scatterlist *sg, int nents,
-			    enum dma_data_direction dir,
-			    unsigned long attrs)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i) {
-		xtensa_unmap_page(dev, sg_dma_address(s),
-				  sg_dma_len(s), dir, attrs);
-	}
-}
-
-int xtensa_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-const struct dma_map_ops xtensa_dma_map_ops = {
-	.alloc = xtensa_dma_alloc,
-	.free = xtensa_dma_free,
-	.map_page = xtensa_map_page,
-	.unmap_page = xtensa_unmap_page,
-	.map_sg = xtensa_map_sg,
-	.unmap_sg = xtensa_unmap_sg,
-	.sync_single_for_cpu = xtensa_sync_single_for_cpu,
-	.sync_single_for_device = xtensa_sync_single_for_device,
-	.sync_sg_for_cpu = xtensa_sync_sg_for_cpu,
-	.sync_sg_for_device = xtensa_sync_sg_for_device,
-	.mapping_error = xtensa_dma_mapping_error,
-};
-EXPORT_SYMBOL(xtensa_dma_map_ops);

arch/xtensa/kernel/setup.c

@@ -47,8 +47,6 @@
 #include <asm/smp.h>
 #include <asm/sysmem.h>
 
-#include <platform/hardware.h>
-
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = {
 	.orig_x = 0,
@@ -81,6 +79,7 @@ static char __initdata command_line[COMMAND_LINE_SIZE];
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 #endif
 
+#ifdef CONFIG_PARSE_BOOTPARAM
 /*
  * Boot parameter parsing.
  *
@@ -178,6 +177,13 @@ static int __init parse_bootparam(const bp_tag_t* tag)
 
 	return 0;
 }
+#else
+static int __init parse_bootparam(const bp_tag_t *tag)
+{
+	pr_info("Ignoring boot parameters at %p\n", tag);
+	return 0;
+}
+#endif
 
 #ifdef CONFIG_OF
 

arch/xtensa/kernel/vmlinux.lds.S

@@ -20,7 +20,7 @@
 
 #include <asm/vectors.h>
 #include <variant/core.h>
-#include <platform/hardware.h>
+
 OUTPUT_ARCH(xtensa)
 ENTRY(_start)
 

arch/xtensa/platforms/iss/include/platform/hardware.h

-/*
- * include/asm-xtensa/platform-iss/hardware.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 Tensilica Inc.
- */
-
-/*
- * This file contains the default configuration of ISS.
- */
-
-#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H
-#define _XTENSA_PLATFORM_ISS_HARDWARE_H
-
-/*
- * Memory configuration.
- */
-
-#define PLATFORM_DEFAULT_MEM_START	0x00000000
-#define PLATFORM_DEFAULT_MEM_SIZE	0x08000000
-
-/*
- * Interrupt configuration.
- */
-
-#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */

arch/xtensa/platforms/xt2000/include/platform/hardware.h

@@ -17,17 +17,6 @@
 
 #include <variant/core.h>
 
-/* 
- * Memory configuration.
- */
-
-#define PLATFORM_DEFAULT_MEM_START 0x00000000
-#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
-
-/*
- * Number of platform IRQs
- */
-#define PLATFORM_NR_IRQS 3
 /*
  * On-board components.
  */

arch/xtensa/platforms/xtfpga/include/platform/hardware.h

@@ -17,15 +17,6 @@
 #ifndef __XTENSA_XTAVNET_HARDWARE_H
 #define __XTENSA_XTAVNET_HARDWARE_H
 
-/* Memory configuration. */
-
-#define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START)
-#define PLATFORM_DEFAULT_MEM_SIZE  __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE)
-
-/* Interrupt configuration. */
-
-#define PLATFORM_NR_IRQS	0
-
 /* Default assignment of LX60 devices to external interrupts. */
 
 #ifdef CONFIG_XTENSA_MX

arch/xtensa/variants/test_kc705_be/include/variant/tie.h

+/* 
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+   that extend basic Xtensa core functionality.  It is customized to this
+   Xtensa processor configuration.
+
+   Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			2	/* number of coprocessors */
+#define XCHAL_CP_MAX			8	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x82	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x80	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP1_NAME			"AudioEngineLX"
+#define XCHAL_CP1_IDENT			AudioEngineLX
+#define XCHAL_CP1_SA_SIZE		120	/* size of state save area */
+#define XCHAL_CP1_SA_ALIGN		8	/* min alignment of save area */
+#define XCHAL_CP_ID_AUDIOENGINELX   	1	/* coprocessor ID (0..7) */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP           	7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		36
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		160	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		8	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	9
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	18
+#define XCHAL_CP1_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,1,0,     ae_ovf_sar, 8, 4, 4,0x03F0,  ur,240,  7,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_bithead, 4, 4, 4,0x03F1,  ur,241, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2,  ur,242, 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ae_sd_no, 4, 4, 4,0x03F3,  ur,243, 28,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_cbegin0, 4, 4, 4,0x03F6,  ur,246, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ae_cend0, 4, 4, 4,0x03F7,  ur,247, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep0, 8, 8, 8,0x0060, aep,0  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep1, 8, 8, 8,0x0061, aep,1  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep2, 8, 8, 8,0x0062, aep,2  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep3, 8, 8, 8,0x0063, aep,3  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep4, 8, 8, 8,0x0064, aep,4  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep5, 8, 8, 8,0x0065, aep,5  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep6, 8, 8, 8,0x0066, aep,6  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep7, 8, 8, 8,0x0067, aep,7  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq0, 8, 8, 8,0x0068, aeq,0  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq1, 8, 8, 8,0x0069, aeq,1  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq2, 8, 8, 8,0x006A, aeq,2  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq3, 8, 8, 8,0x006B, aeq,3  , 56,0,0,0)
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8
+/* Byte length of instruction from its first byte, per FLIX.  */
+#define XCHAL_BYTE0_FORMAT_LENGTHS	\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,\
+	2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
+	2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
+	2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,\
+	3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3, 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
+
+#endif /*_XTENSA_CORE_TIE_H*/
+

drivers/irqchip/irq-xtensa-mx.c

@@ -98,14 +98,12 @@ static void xtensa_mx_irq_unmask(struct irq_data *d)
 
 static void xtensa_mx_irq_enable(struct irq_data *d)
 {
-	variant_irq_enable(d->hwirq);
 	xtensa_mx_irq_unmask(d);
 }
 
 static void xtensa_mx_irq_disable(struct irq_data *d)
 {
 	xtensa_mx_irq_mask(d);
-	variant_irq_disable(d->hwirq);
 }
 
 static void xtensa_mx_irq_ack(struct irq_data *d)

drivers/irqchip/irq-xtensa-pic.c

@@ -55,14 +55,12 @@ static void xtensa_irq_unmask(struct irq_data *d)
 
 static void xtensa_irq_enable(struct irq_data *d)
 {
-	variant_irq_enable(d->hwirq);
 	xtensa_irq_unmask(d);
 }
 
 static void xtensa_irq_disable(struct irq_data *d)
 {
 	xtensa_irq_mask(d);
-	variant_irq_disable(d->hwirq);
 }
 
 static void xtensa_irq_ack(struct irq_data *d)