Merge tag 'fixes-for-v5.6-rc1' of...

Merge tag 'fixes-for-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

USB: fixes for v5.6-rc1

DWC3 learned that we can't always depend on Event Status bits. A
problem was solved which would only surface with scatter list on IN
endpoints.

DWC2 got a fix for feature requests (both set and clear) and GetStatus
request.

The serial gadget got a fix for a TX stall bug.

Composite framework now works better for SSP devices.

* tag 'fixes-for-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: dwc3: debug: fix string position formatting mixup with ret and len
  usb: gadget: serial: fix Tx stall after buffer overflow
  usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows
  usb: dwc2: Fix in ISOC request length checking
  usb: gadget: composite: Support more than 500mA MaxPower
  usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
  usb: gadget: u_audio: Fix high-speed max packet size
  usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields

drivers/usb/dwc2/gadget.c

@@ -1083,11 +1083,6 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
 	else
 		packets = 1;	/* send one packet if length is zero. */
 
-	if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
-		dev_err(hsotg->dev, "req length > maxpacket*mc\n");
-		return;
-	}
-
 	if (dir_in && index != 0)
 		if (hs_ep->isochronous)
 			epsize = DXEPTSIZ_MC(packets);
@@ -1391,6 +1386,13 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 	req->actual = 0;
 	req->status = -EINPROGRESS;
 
+	/* Don't queue ISOC request if length greater than mps*mc */
+	if (hs_ep->isochronous &&
+	    req->length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
+		dev_err(hs->dev, "req length > maxpacket*mc\n");
+		return -EINVAL;
+	}
+
 	/* In DDMA mode for ISOC's don't queue request if length greater
 	 * than descriptor limits.
 	 */
@@ -1632,6 +1634,7 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
 	struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
 	struct dwc2_hsotg_ep *ep;
 	__le16 reply;
+	u16 status;
 	int ret;
 
 	dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
@@ -1643,11 +1646,10 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
 
 	switch (ctrl->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_DEVICE:
-		/*
-		 * bit 0 => self powered
-		 * bit 1 => remote wakeup
-		 */
-		reply = cpu_to_le16(0);
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		status |= hsotg->remote_wakeup_allowed <<
+			  USB_DEVICE_REMOTE_WAKEUP;
+		reply = cpu_to_le16(status);
 		break;
 
 	case USB_RECIP_INTERFACE:
@@ -1758,7 +1760,10 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
 	case USB_RECIP_DEVICE:
 		switch (wValue) {
 		case USB_DEVICE_REMOTE_WAKEUP:
+			if (set)
 				hsotg->remote_wakeup_allowed = 1;
+			else
+				hsotg->remote_wakeup_allowed = 0;
 			break;
 
 		case USB_DEVICE_TEST_MODE:
@@ -1768,6 +1773,11 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
 				return -EINVAL;
 
 			hsotg->test_mode = wIndex >> 8;
+			break;
+		default:
+			return -ENOENT;
+		}
+
 		ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
 		if (ret) {
 			dev_err(hsotg->dev,
@@ -1775,10 +1785,6 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
 			return ret;
 		}
 		break;
-		default:
-			return -ENOENT;
-		}
-		break;
 
 	case USB_RECIP_ENDPOINT:
 		ep = ep_from_windex(hsotg, wIndex);

drivers/usb/dwc3/gadget.c

@@ -2429,7 +2429,8 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
 	if (event->status & DEPEVT_STATUS_SHORT && !chain)
 		return 1;
 
-	if (event->status & DEPEVT_STATUS_IOC)
+	if ((trb->ctrl & DWC3_TRB_CTRL_IOC) ||
+	    (trb->ctrl & DWC3_TRB_CTRL_LST))
 		return 1;
 
 	return 0;

drivers/usb/gadget/composite.c

@@ -437,12 +437,14 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
 		val = CONFIG_USB_GADGET_VBUS_DRAW;
 	if (!val)
 		return 0;
-	switch (speed) {
-	case USB_SPEED_SUPER:
-		return DIV_ROUND_UP(val, 8);
-	default:
-		return DIV_ROUND_UP(val, 2);
-	}
+	if (speed < USB_SPEED_SUPER)
+		return min(val, 500U) / 2;
+	else
+		/*
+		 * USB 3.x supports up to 900mA, but since 900 isn't divisible
+		 * by 8 the integral division will effectively cap to 896mA.
+		 */
+		return min(val, 900U) / 8;
 }
 
 static int config_buf(struct usb_configuration *config,
@@ -854,6 +856,10 @@ static int set_config(struct usb_composite_dev *cdev,
 
 	/* when we return, be sure our power usage is valid */
 	power = c->MaxPower ? c->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
+	if (gadget->speed < USB_SPEED_SUPER)
+		power = min(power, 500U);
+	else
+		power = min(power, 900U);
 done:
 	usb_gadget_vbus_draw(gadget, power);
 	if (result >= 0 && cdev->delayed_status)
@@ -2280,7 +2286,7 @@ void composite_resume(struct usb_gadget *gadget)
 {
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
 	struct usb_function		*f;
-	u16				maxpower;
+	unsigned			maxpower;
 
 	/* REVISIT:  should we have config level
 	 * suspend/resume callbacks?
@@ -2294,10 +2300,14 @@ void composite_resume(struct usb_gadget *gadget)
 				f->resume(f);
 		}
 
-		maxpower = cdev->config->MaxPower;
+		maxpower = cdev->config->MaxPower ?
+			cdev->config->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
+		if (gadget->speed < USB_SPEED_SUPER)
+			maxpower = min(maxpower, 500U);
+		else
+			maxpower = min(maxpower, 900U);
 
-		usb_gadget_vbus_draw(gadget, maxpower ?
-			maxpower : CONFIG_USB_GADGET_VBUS_DRAW);
+		usb_gadget_vbus_draw(gadget, maxpower);
 	}
 
 	cdev->suspended = 0;

drivers/usb/gadget/function/f_fs.c

@@ -1162,18 +1162,19 @@ static int ffs_aio_cancel(struct kiocb *kiocb)
 {
 	struct ffs_io_data *io_data = kiocb->private;
 	struct ffs_epfile *epfile = kiocb->ki_filp->private_data;
+	unsigned long flags;
 	int value;
 
 	ENTER();
 
-	spin_lock_irq(&epfile->ffs->eps_lock);
+	spin_lock_irqsave(&epfile->ffs->eps_lock, flags);
 
 	if (likely(io_data && io_data->ep && io_data->req))
 		value = usb_ep_dequeue(io_data->ep, io_data->req);
 	else
 		value = -EINVAL;
 
-	spin_unlock_irq(&epfile->ffs->eps_lock);
+	spin_unlock_irqrestore(&epfile->ffs->eps_lock, flags);
 
 	return value;
 }

drivers/usb/gadget/function/u_audio.c

@@ -361,7 +361,7 @@ int u_audio_start_capture(struct g_audio *audio_dev)
 	ep = audio_dev->out_ep;
 	prm = &uac->c_prm;
 	config_ep_by_speed(gadget, &audio_dev->func, ep);
-	req_len = prm->max_psize;
+	req_len = ep->maxpacket;
 
 	prm->ep_enabled = true;
 	usb_ep_enable(ep);
@@ -379,7 +379,7 @@ int u_audio_start_capture(struct g_audio *audio_dev)
 			req->context = &prm->ureq[i];
 			req->length = req_len;
 			req->complete = u_audio_iso_complete;
-			req->buf = prm->rbuf + i * prm->max_psize;
+			req->buf = prm->rbuf + i * ep->maxpacket;
 		}
 
 		if (usb_ep_queue(ep, prm->ureq[i].req, GFP_ATOMIC))
@@ -430,9 +430,9 @@ int u_audio_start_playback(struct g_audio *audio_dev)
 	uac->p_pktsize = min_t(unsigned int,
 				uac->p_framesize *
 					(params->p_srate / uac->p_interval),
-				prm->max_psize);
+				ep->maxpacket);
 
-	if (uac->p_pktsize < prm->max_psize)
+	if (uac->p_pktsize < ep->maxpacket)
 		uac->p_pktsize_residue = uac->p_framesize *
 			(params->p_srate % uac->p_interval);
 	else
@@ -457,7 +457,7 @@ int u_audio_start_playback(struct g_audio *audio_dev)
 			req->context = &prm->ureq[i];
 			req->length = req_len;
 			req->complete = u_audio_iso_complete;
-			req->buf = prm->rbuf + i * prm->max_psize;
+			req->buf = prm->rbuf + i * ep->maxpacket;
 		}
 
 		if (usb_ep_queue(ep, prm->ureq[i].req, GFP_ATOMIC))

drivers/usb/gadget/function/u_serial.c

@@ -561,8 +561,10 @@ static int gs_start_io(struct gs_port *port)
 	port->n_read = 0;
 	started = gs_start_rx(port);
 
-	/* unblock any pending writes into our circular buffer */
 	if (started) {
+		gs_start_tx(port);
+		/* Unblock any pending writes into our circular buffer, in case
+		 * we didn't in gs_start_tx() */
 		tty_wakeup(port->port.tty);
 	} else {
 		gs_free_requests(ep, head, &port->read_allocated);