Merge tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - New APM X-Gene SoC EDAC driver (Loc Ho)

 - AMD error injection module improvements (Aravind Gopalakrishnan)

 - Altera Arria 10 support (Thor Thayer)

 - misc fixes and cleanups all over the place

* tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (28 commits)
  EDAC: Update Documentation/edac.txt
  EDAC: Fix typos in Documentation/edac.txt
  EDAC, mce_amd_inj: Set MISCV on injection
  EDAC, mce_amd_inj: Move bit preparations before the injection
  EDAC, mce_amd_inj: Cleanup and simplify README
  EDAC, altera: Do not allow suspend when EDAC is enabled
  EDAC, mce_amd_inj: Make inj_type static
  arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support
  EDAC, altera: Add Arria10 EDAC support
  EDAC, altera: Refactor for Altera CycloneV SoC
  EDAC, altera: Generalize driver to use DT Memory size
  EDAC, mce_amd_inj: Add README file
  EDAC, mce_amd_inj: Add individual permissions field to dfs_node
  EDAC, mce_amd_inj: Modify flags attribute to use string arguments
  EDAC, mce_amd_inj: Read out number of MCE banks from the hardware
  EDAC, mce_amd_inj: Use MCE_INJECT_GET macro for bank node too
  EDAC, xgene: Fix cpuid abuse
  EDAC, mpc85xx: Extend error address to 64 bit
  EDAC, mpc8xxx: Adapt for FSL SoC
  EDAC, edac_stub: Drop arch-specific include
  ...

Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt

@@ -2,7 +2,7 @@ Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
 The EDAC accesses a range of registers in the SDRAM controller.
 
 Required properties:
-- compatible : should contain "altr,sdram-edac";
+- compatible : should contain "altr,sdram-edac" or "altr,sdram-edac-a10"
 - altr,sdr-syscon : phandle of the sdr module
 - interrupts : Should contain the SDRAM ECC IRQ in the
 	appropriate format for the IRQ controller.

Documentation/devicetree/bindings/edac/apm-xgene-edac.txt

+* APM X-Gene SoC EDAC node
+
+EDAC node is defined to describe on-chip error detection and correction.
+The follow error types are supported:
+
+  memory controller	- Memory controller
+  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
+
+The following section describes the EDAC DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-edac".
+- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
+- regmap-efuse		: Regmap of the PMD efuse resource.
+- reg			: First resource shall be the CPU bus (PCP) resource.
+- interrupts            : Interrupt-specifier for MCU, PMD, L3, or SoC error
+			  IRQ(s).
+
+Required properties for memory controller subnode:
+- compatible		: Shall be "apm,xgene-edac-mc".
+- reg			: First resource shall be the memory controller unit
+                          (MCU) resource.
+- memory-controller	: Instance number of the memory controller.
+
+Required properties for PMD subnode:
+- compatible		: Shall be "apm,xgene-edac-pmd" or
+                          "apm,xgene-edac-pmd-v2".
+- reg			: First resource shall be the PMD resource.
+- pmd-controller	: Instance number of the PMD controller.
+
+Example:
+	csw: csw@7e200000 {
+		compatible = "apm,xgene-csw", "syscon";
+		reg = <0x0 0x7e200000 0x0 0x1000>;
+	};
+
+	mcba: mcba@7e700000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e700000 0x0 0x1000>;
+	};
+
+	mcbb: mcbb@7e720000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e720000 0x0 0x1000>;
+	};
+
+	efuse: efuse@1054a000 {
+		compatible = "apm,xgene-efuse", "syscon";
+		reg = <0x0 0x1054a000 0x0 0x20>;
+	};
+
+	edac@78800000 {
+		compatible = "apm,xgene-edac";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		regmap-csw = <&csw>;
+		regmap-mcba = <&mcba>;
+		regmap-mcbb = <&mcbb>;
+		regmap-efuse = <&efuse>;
+		reg = <0x0 0x78800000 0x0 0x100>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>,
+			     <0x0 0x27 0x4>;
+
+		edacmc@7e800000 {
+			compatible = "apm,xgene-edac-mc";
+			reg = <0x0 0x7e800000 0x0 0x1000>;
+			memory-controller = <0>;
+		};
+
+		edacpmd@7c000000 {
+			compatible = "apm,xgene-edac-pmd";
+			reg = <0x0 0x7c000000 0x0 0x200000>;
+			pmd-controller = <0>;
+		};
+	};

MAINTAINERS

@@ -3777,7 +3777,7 @@ S:	Maintained
 F:	drivers/edac/ie31200_edac.c
 
 EDAC-MPC85XX
-M:	Johannes Thumshirn <johannes.thumshirn@men.de>
+M:	Johannes Thumshirn <morbidrsa@gmail.com>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
@@ -3804,6 +3804,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/sb_edac.c
 
+EDAC-XGENE
+APPLIED MICRO (APM) X-GENE SOC EDAC
+M:     Loc Ho <lho@apm.com>
+S:     Supported
+F:     drivers/edac/xgene_edac.c
+F:     Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
+
 EDIROL UA-101/UA-1000 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -6488,14 +6495,14 @@ F:	include/linux/mtd/
 F:	include/uapi/mtd/
 
 MEN A21 WATCHDOG DRIVER
-M:	Johannes Thumshirn <johannes.thumshirn@men.de>
+M:	Johannes Thumshirn <morbidrsa@gmail.com>
 L:	linux-watchdog@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/watchdog/mena21_wdt.c
 
 MEN CHAMELEON BUS (mcb)
-M:	Johannes Thumshirn <johannes.thumshirn@men.de>
-S:	Supported
+M:	Johannes Thumshirn <morbidrsa@gmail.com>
+S:	Maintained
 F:	drivers/mcb/
 F:	include/linux/mcb.h
 

arch/arm/Kconfig

@@ -15,6 +15,8 @@ config ARM
 	select CLONE_BACKWARDS
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
 	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -253,6 +253,17 @@ i2c4: i2c@ffc02600 {
 			status = "disabled";
 		};
 
+		sdr: sdr@ffc25000 {
+			compatible = "syscon";
+			reg = <0xffcfb100 0x80>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac-a10";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 2 4>, <0 0 4>;
+		};
+
 		L2: l2-cache@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;

arch/arm/include/asm/edac.h

@@ -18,11 +18,12 @@
 #define ASM_EDAC_H
 /*
  * ECC atomic, DMA, SMP and interrupt safe scrub function.
- * Implements the per arch atomic_scrub() that EDAC use for software
+ * Implements the per arch edac_atomic_scrub() that EDAC use for software
  * ECC scrubbing.  It reads memory and then writes back the original
  * value, allowing the hardware to detect and correct memory errors.
  */
-static inline void atomic_scrub(void *va, u32 size)
+
+static inline void edac_atomic_scrub(void *va, u32 size)
 {
 #if __LINUX_ARM_ARCH__ >= 6
 	unsigned int *virt_addr = va;

arch/arm64/Kconfig

@@ -23,6 +23,7 @@ config ARM64
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
+	select EDAC_SUPPORT
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS
 	select GENERIC_ALLOCATOR

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -396,6 +396,89 @@ msi: msi@79000000 {
 					0x0 0x1f 0x4>;
 		};
 
+		csw: csw@7e200000 {
+			compatible = "apm,xgene-csw", "syscon";
+			reg = <0x0 0x7e200000 0x0 0x1000>;
+		};
+
+		mcba: mcba@7e700000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e700000 0x0 0x1000>;
+		};
+
+		mcbb: mcbb@7e720000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e720000 0x0 0x1000>;
+		};
+
+		efuse: efuse@1054a000 {
+			compatible = "apm,xgene-efuse", "syscon";
+			reg = <0x0 0x1054a000 0x0 0x20>;
+		};
+
+		edac@78800000 {
+			compatible = "apm,xgene-edac";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			regmap-efuse = <&efuse>;
+			reg = <0x0 0x78800000 0x0 0x100>;
+			interrupts = <0x0 0x20 0x4>,
+				     <0x0 0x21 0x4>,
+				     <0x0 0x27 0x4>;
+
+			edacmc@7e800000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e800000 0x0 0x1000>;
+				memory-controller = <0>;
+			};
+
+			edacmc@7e840000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e840000 0x0 0x1000>;
+				memory-controller = <1>;
+			};
+
+			edacmc@7e880000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e880000 0x0 0x1000>;
+				memory-controller = <2>;
+			};
+
+			edacmc@7e8c0000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e8c0000 0x0 0x1000>;
+				memory-controller = <3>;
+			};
+
+			edacpmd@7c000000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c000000 0x0 0x200000>;
+				pmd-controller = <0>;
+			};
+
+			edacpmd@7c200000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c200000 0x0 0x200000>;
+				pmd-controller = <1>;
+			};
+
+			edacpmd@7c400000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c400000 0x0 0x200000>;
+				pmd-controller = <2>;
+			};
+
+			edacpmd@7c600000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c600000 0x0 0x200000>;
+				pmd-controller = <3>;
+			};
+		};
+
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";

arch/mips/Kconfig

@@ -819,6 +819,7 @@ config CAVIUM_OCTEON_SOC
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK

arch/mips/include/asm/edac.h

@@ -5,7 +5,7 @@
 
 /* ECC atomic, DMA, SMP and interrupt safe scrub function */
 
-static inline void atomic_scrub(void *va, u32 size)
+static inline void edac_atomic_scrub(void *va, u32 size)
 {
 	unsigned long *virt_addr = va;
 	unsigned long temp;
@@ -21,7 +21,7 @@ static inline void atomic_scrub(void *va, u32 size)
 
 		__asm__ __volatile__ (
 		"	.set	mips2					\n"
-		"1:	ll	%0, %1		# atomic_scrub		\n"
+		"1:	ll	%0, %1		# edac_atomic_scrub	\n"
 		"	addu	%0, $0					\n"
 		"	sc	%0, %1					\n"
 		"	beqz	%0, 1b					\n"

arch/powerpc/Kconfig

@@ -153,6 +153,8 @@ config PPC
 	select NO_BOOTMEM
 	select HAVE_GENERIC_RCU_GUP
 	select HAVE_PERF_EVENTS_NMI if PPC64
+	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN

arch/powerpc/include/asm/edac.h

@@ -12,11 +12,11 @@
 #define ASM_EDAC_H
 /*
  * ECC atomic, DMA, SMP and interrupt safe scrub function.
- * Implements the per arch atomic_scrub() that EDAC use for software
+ * Implements the per arch edac_atomic_scrub() that EDAC use for software
  * ECC scrubbing.  It reads memory and then writes back the original
  * value, allowing the hardware to detect and correct memory errors.
  */
-static __inline__ void atomic_scrub(void *va, u32 size)
+static __inline__ void edac_atomic_scrub(void *va, u32 size)
 {
 	unsigned int *virt_addr = va;
 	unsigned int temp;

arch/tile/Kconfig

@@ -28,6 +28,7 @@ config TILE
 	select HAVE_DEBUG_STACKOVERFLOW
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_CONTEXT_TRACKING
+	select EDAC_SUPPORT
 
 # FIXME: investigate whether we need/want these options.
 #	select HAVE_IOREMAP_PROT

arch/tile/include/asm/edac.h

-/*
- * Copyright 2011 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#ifndef _ASM_TILE_EDAC_H
-#define _ASM_TILE_EDAC_H
-
-/* ECC atomic, DMA, SMP and interrupt safe scrub function */
-
-static inline void atomic_scrub(void *va, u32 size)
-{
-	/*
-	 * These is nothing to be done here because CE is
-	 * corrected by the mshim.
-	 */
-	return;
-}
-
-#endif /* _ASM_TILE_EDAC_H */

arch/x86/Kconfig

@@ -50,6 +50,8 @@ config X86
 	select CLONE_BACKWARDS			if X86_32
 	select COMPAT_OLD_SIGACTION		if IA32_EMULATION
 	select DCACHE_WORD_ACCESS
+	select EDAC_ATOMIC_SCRUB
+	select EDAC_SUPPORT
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST	if X86_64 || (X86_32 && X86_LOCAL_APIC)
 	select GENERIC_CLOCKEVENTS_MIN_ADJUST

arch/x86/include/asm/edac.h

@@ -3,7 +3,7 @@
 
 /* ECC atomic, DMA, SMP and interrupt safe scrub function */
 
-static inline void atomic_scrub(void *va, u32 size)
+static inline void edac_atomic_scrub(void *va, u32 size)
 {
 	u32 i, *virt_addr = va;
 

drivers/edac/Kconfig

@@ -2,15 +2,16 @@
 #	EDAC Kconfig
 #	Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
 #	Licensed and distributed under the GPL
-#
+
+config EDAC_ATOMIC_SCRUB
+	bool
 
 config EDAC_SUPPORT
 	bool
 
 menuconfig EDAC
 	bool "EDAC (Error Detection And Correction) reporting"
-	depends on HAS_IOMEM
-	depends on X86 || PPC || TILE || ARM || EDAC_SUPPORT
+	depends on HAS_IOMEM && EDAC_SUPPORT
 	help
 	  EDAC is designed to report errors in the core system.
 	  These are low-level errors that are reported in the CPU or
@@ -262,10 +263,10 @@ config EDAC_SBRIDGE
 
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
-	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
+	depends on EDAC_MM_EDAC && FSL_SOC
 	help
 	  Support for error detection and correction on the Freescale
-	  MPC8349, MPC8560, MPC8540, MPC8548
+	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
 
 config EDAC_MV64X60
 	tristate "Marvell MV64x60"
@@ -377,8 +378,8 @@ config EDAC_OCTEON_PCI
 	  Cavium Octeon family of SOCs.
 
 config EDAC_ALTERA_MC
-	tristate "Altera SDRAM Memory Controller EDAC"
-	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
+	bool "Altera SDRAM Memory Controller EDAC"
+	depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA
 	help
 	  Support for error detection and correction on the
 	  Altera SDRAM memory controller. Note that the
@@ -392,4 +393,11 @@ config EDAC_SYNOPSYS
 	  Support for error detection and correction on the Synopsys DDR
 	  memory controller.
 
+config EDAC_XGENE
+	tristate "APM X-Gene SoC"
+	depends on EDAC_MM_EDAC && (ARM64 || COMPILE_TEST)
+	help
+	  Support for error detection and correction on the
+	  APM X-Gene family of SOCs.
+
 endif # EDAC

drivers/edac/Makefile

@@ -68,3 +68,4 @@ obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
 
 obj-$(CONFIG_EDAC_ALTERA_MC)		+= altera_edac.o
 obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
+obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o

drivers/edac/altera_edac.h

+/*
+ *
+ * Copyright (C) 2015 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ALTERA_EDAC_H
+#define _ALTERA_EDAC_H
+
+#include <linux/edac.h>
+#include <linux/types.h>
+
+/* SDRAM Controller CtrlCfg Register */
+#define CV_CTLCFG_OFST             0x00
+
+/* SDRAM Controller CtrlCfg Register Bit Masks */
+#define CV_CTLCFG_ECC_EN           0x400
+#define CV_CTLCFG_ECC_CORR_EN      0x800
+#define CV_CTLCFG_GEN_SB_ERR       0x2000
+#define CV_CTLCFG_GEN_DB_ERR       0x4000
+
+#define CV_CTLCFG_ECC_AUTO_EN     (CV_CTLCFG_ECC_EN | \
+				   CV_CTLCFG_ECC_CORR_EN)
+
+/* SDRAM Controller Address Width Register */
+#define CV_DRAMADDRW_OFST          0x2C
+
+/* SDRAM Controller Address Widths Field Register */
+#define DRAMADDRW_COLBIT_MASK      0x001F
+#define DRAMADDRW_COLBIT_SHIFT     0
+#define DRAMADDRW_ROWBIT_MASK      0x03E0
+#define DRAMADDRW_ROWBIT_SHIFT     5
+#define CV_DRAMADDRW_BANKBIT_MASK  0x1C00
+#define CV_DRAMADDRW_BANKBIT_SHIFT 10
+#define CV_DRAMADDRW_CSBIT_MASK    0xE000
+#define CV_DRAMADDRW_CSBIT_SHIFT   13
+
+/* SDRAM Controller Interface Data Width Register */
+#define CV_DRAMIFWIDTH_OFST        0x30
+
+/* SDRAM Controller Interface Data Width Defines */
+#define CV_DRAMIFWIDTH_16B_ECC     24
+#define CV_DRAMIFWIDTH_32B_ECC     40
+
+/* SDRAM Controller DRAM Status Register */
+#define CV_DRAMSTS_OFST            0x38
+
+/* SDRAM Controller DRAM Status Register Bit Masks */
+#define CV_DRAMSTS_SBEERR          0x04
+#define CV_DRAMSTS_DBEERR          0x08
+#define CV_DRAMSTS_CORR_DROP       0x10
+
+/* SDRAM Controller DRAM IRQ Register */
+#define CV_DRAMINTR_OFST           0x3C
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define CV_DRAMINTR_INTREN         0x01
+#define CV_DRAMINTR_SBEMASK        0x02
+#define CV_DRAMINTR_DBEMASK        0x04
+#define CV_DRAMINTR_CORRDROPMASK   0x08
+#define CV_DRAMINTR_INTRCLR        0x10
+
+/* SDRAM Controller Single Bit Error Count Register */
+#define CV_SBECOUNT_OFST           0x40
+
+/* SDRAM Controller Double Bit Error Count Register */
+#define CV_DBECOUNT_OFST           0x44
+
+/* SDRAM Controller ECC Error Address Register */
+#define CV_ERRADDR_OFST            0x48
+
+/*-----------------------------------------*/
+
+/* SDRAM Controller EccCtrl Register */
+#define A10_ECCCTRL1_OFST          0x00
+
+/* SDRAM Controller EccCtrl Register Bit Masks */
+#define A10_ECCCTRL1_ECC_EN        0x001
+#define A10_ECCCTRL1_CNT_RST       0x010
+#define A10_ECCCTRL1_AWB_CNT_RST   0x100
+#define A10_ECC_CNT_RESET_MASK     (A10_ECCCTRL1_CNT_RST | \
+				    A10_ECCCTRL1_AWB_CNT_RST)
+
+/* SDRAM Controller Address Width Register */
+#define CV_DRAMADDRW               0xFFC2502C
+#define A10_DRAMADDRW              0xFFCFA0A8
+
+/* SDRAM Controller Address Widths Field Register */
+#define DRAMADDRW_COLBIT_MASK      0x001F
+#define DRAMADDRW_COLBIT_SHIFT     0
+#define DRAMADDRW_ROWBIT_MASK      0x03E0
+#define DRAMADDRW_ROWBIT_SHIFT     5
+#define CV_DRAMADDRW_BANKBIT_MASK  0x1C00
+#define CV_DRAMADDRW_BANKBIT_SHIFT 10
+#define CV_DRAMADDRW_CSBIT_MASK    0xE000
+#define CV_DRAMADDRW_CSBIT_SHIFT   13
+
+#define A10_DRAMADDRW_BANKBIT_MASK  0x3C00
+#define A10_DRAMADDRW_BANKBIT_SHIFT 10
+#define A10_DRAMADDRW_GRPBIT_MASK   0xC000
+#define A10_DRAMADDRW_GRPBIT_SHIFT  14
+#define A10_DRAMADDRW_CSBIT_MASK    0x70000
+#define A10_DRAMADDRW_CSBIT_SHIFT   16
+
+/* SDRAM Controller Interface Data Width Register */
+#define CV_DRAMIFWIDTH             0xFFC25030
+#define A10_DRAMIFWIDTH            0xFFCFB008
+
+/* SDRAM Controller Interface Data Width Defines */
+#define CV_DRAMIFWIDTH_16B_ECC     24
+#define CV_DRAMIFWIDTH_32B_ECC     40
+
+#define A10_DRAMIFWIDTH_16B        0x0
+#define A10_DRAMIFWIDTH_32B        0x1
+#define A10_DRAMIFWIDTH_64B        0x2
+
+/* SDRAM Controller DRAM IRQ Register */
+#define A10_ERRINTEN_OFST          0x10
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define A10_ERRINTEN_SERRINTEN     0x01
+#define A10_ERRINTEN_DERRINTEN     0x02
+#define A10_ECC_IRQ_EN_MASK        (A10_ERRINTEN_SERRINTEN | \
+				    A10_ERRINTEN_DERRINTEN)
+
+/* SDRAM Interrupt Mode Register */
+#define A10_INTMODE_OFST           0x1C
+#define A10_INTMODE_SB_INT         1
+
+/* SDRAM Controller Error Status Register */
+#define A10_INTSTAT_OFST           0x20
+
+/* SDRAM Controller Error Status Register Bit Masks */
+#define A10_INTSTAT_SBEERR         0x01
+#define A10_INTSTAT_DBEERR         0x02
+
+/* SDRAM Controller ECC Error Address Register */
+#define A10_DERRADDR_OFST          0x2C
+#define A10_SERRADDR_OFST          0x30
+
+/* SDRAM Controller ECC Diagnostic Register */
+#define A10_DIAGINTTEST_OFST       0x24
+
+#define A10_DIAGINT_TSERRA_MASK    0x0001
+#define A10_DIAGINT_TDERRA_MASK    0x0100
+
+#define A10_SBERR_IRQ              34
+#define A10_DBERR_IRQ              32
+
+/* SDRAM Single Bit Error Count Compare Set Register */
+#define A10_SERRCNTREG_OFST        0x3C
+
+#define A10_SYMAN_INTMASK_CLR      0xFFD06098
+#define A10_INTMASK_CLR_OFST       0x10
+#define A10_DDR0_IRQ_MASK          BIT(17)
+
+struct altr_sdram_prv_data {
+	int ecc_ctrl_offset;
+	int ecc_ctl_en_mask;
+	int ecc_cecnt_offset;
+	int ecc_uecnt_offset;
+	int ecc_stat_offset;
+	int ecc_stat_ce_mask;
+	int ecc_stat_ue_mask;
+	int ecc_saddr_offset;
+	int ecc_daddr_offset;
+	int ecc_irq_en_offset;
+	int ecc_irq_en_mask;
+	int ecc_irq_clr_offset;
+	int ecc_irq_clr_mask;
+	int ecc_cnt_rst_offset;
+	int ecc_cnt_rst_mask;
+#ifdef CONFIG_EDAC_DEBUG
+	struct edac_dev_sysfs_attribute *eccmgr_sysfs_attr;
+	int ecc_enable_mask;
+	int ce_set_mask;
+	int ue_set_mask;
+	int ce_ue_trgr_offset;
+#endif
+};
+
+/* Altera SDRAM Memory Controller data */
+struct altr_sdram_mc_data {
+	struct regmap *mc_vbase;
+	int sb_irq;
+	int db_irq;
+	const struct altr_sdram_prv_data *data;
+};
+
+#endif	/* #ifndef _ALTERA_EDAC_H */

drivers/edac/edac_mc.c

@@ -30,11 +30,16 @@
 #include <linux/bitops.h>
 #include <asm/uaccess.h>
 #include <asm/page.h>
-#include <asm/edac.h>
 #include "edac_core.h"
 #include "edac_module.h"
 #include <ras/ras_event.h>
 
+#ifdef CONFIG_EDAC_ATOMIC_SCRUB
+#include <asm/edac.h>
+#else
+#define edac_atomic_scrub(va, size) do { } while (0)
+#endif
+
 /* lock to memory controller's control array */
 static DEFINE_MUTEX(mem_ctls_mutex);
 static LIST_HEAD(mc_devices);
@@ -874,7 +879,7 @@ static void edac_mc_scrub_block(unsigned long page, unsigned long offset,
 	virt_addr = kmap_atomic(pg);
 
 	/* Perform architecture specific atomic scrub operation */
-	atomic_scrub(virt_addr + offset, size);
+	edac_atomic_scrub(virt_addr + offset, size);
 
 	/* Unmap and complete */
 	kunmap_atomic(virt_addr);

drivers/edac/edac_stub.c

@@ -16,7 +16,6 @@
 #include <linux/edac.h>
 #include <linux/atomic.h>
 #include <linux/device.h>
-#include <asm/edac.h>
 
 int edac_op_state = EDAC_OPSTATE_INVAL;
 EXPORT_SYMBOL_GPL(edac_op_state);

drivers/edac/mce_amd_inj.c

@@ -15,6 +15,8 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/cpu.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
 #include <asm/mce.h>
 
 #include "mce_amd.h"
@@ -25,6 +27,25 @@
 static struct mce i_mce;
 static struct dentry *dfs_inj;
 
+static u8 n_banks;
+
+#define MAX_FLAG_OPT_SIZE	3
+
+enum injection_type {
+	SW_INJ = 0,	/* SW injection, simply decode the error */
+	HW_INJ,		/* Trigger a #MC */
+	N_INJ_TYPES,
+};
+
+static const char * const flags_options[] = {
+	[SW_INJ] = "sw",
+	[HW_INJ] = "hw",
+	NULL
+};
+
+/* Set default injection to SW_INJ */
+static enum injection_type inj_type = SW_INJ;
+
 #define MCE_INJECT_SET(reg)						\
 static int inj_##reg##_set(void *data, u64 val)				\
 {									\
@@ -79,24 +100,66 @@ static int toggle_hw_mce_inject(unsigned int cpu, bool enable)
 	return err;
 }
 
-static int flags_get(void *data, u64 *val)
+static int __set_inj(const char *buf)
 {
-	struct mce *m = (struct mce *)data;
+	int i;
 
-	*val = m->inject_flags;
+	for (i = 0; i < N_INJ_TYPES; i++) {
+		if (!strncmp(flags_options[i], buf, strlen(flags_options[i]))) {
+			inj_type = i;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
 
-	return 0;
+static ssize_t flags_read(struct file *filp, char __user *ubuf,
+			  size_t cnt, loff_t *ppos)
+{
+	char buf[MAX_FLAG_OPT_SIZE];
+	int n;
+
+	n = sprintf(buf, "%s\n", flags_options[inj_type]);
+
+	return simple_read_from_buffer(ubuf, cnt, ppos, buf, n);
 }
 
-static int flags_set(void *data, u64 val)
+static ssize_t flags_write(struct file *filp, const char __user *ubuf,
+			   size_t cnt, loff_t *ppos)
 {
-	struct mce *m = (struct mce *)data;
+	char buf[MAX_FLAG_OPT_SIZE], *__buf;
+	int err;
+	size_t ret;
 
-	m->inject_flags = (u8)val;
-	return 0;
+	if (cnt > MAX_FLAG_OPT_SIZE)
+		cnt = MAX_FLAG_OPT_SIZE;
+
+	ret = cnt;
+
+	if (copy_from_user(&buf, ubuf, cnt))
+		return -EFAULT;
+
+	buf[cnt - 1] = 0;
+
+	/* strip whitespace */
+	__buf = strstrip(buf);
+
+	err = __set_inj(__buf);
+	if (err) {
+		pr_err("%s: Invalid flags value: %s\n", __func__, __buf);
+		return err;
+	}
+
+	*ppos += ret;
+
+	return ret;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(flags_fops, flags_get, flags_set, "%llu\n");
+static const struct file_operations flags_fops = {
+	.read           = flags_read,
+	.write          = flags_write,
+	.llseek         = generic_file_llseek,
+};
 
 /*
  * On which CPU to inject?
@@ -128,21 +191,24 @@ static void do_inject(void)
 	unsigned int cpu = i_mce.extcpu;
 	u8 b = i_mce.bank;
 
-	if (!(i_mce.inject_flags & MCJ_EXCEPTION)) {
+	if (i_mce.misc)
+		i_mce.status |= MCI_STATUS_MISCV;
+
+	if (inj_type == SW_INJ) {
 		amd_decode_mce(NULL, 0, &i_mce);
 		return;
 	}
 
-	get_online_cpus();
-	if (!cpu_online(cpu))
-		goto err;
-
 	/* prep MCE global settings for the injection */
 	mcg_status = MCG_STATUS_MCIP | MCG_STATUS_EIPV;
 
 	if (!(i_mce.status & MCI_STATUS_PCC))
 		mcg_status |= MCG_STATUS_RIPV;
 
+	get_online_cpus();
+	if (!cpu_online(cpu))
+		goto err;
+
 	toggle_hw_mce_inject(cpu, true);
 
 	wrmsr_on_cpu(cpu, MSR_IA32_MCG_STATUS,
@@ -174,11 +240,9 @@ static int inj_bank_set(void *data, u64 val)
 {
 	struct mce *m = (struct mce *)data;
 
-	if (val > 5) {
-		if (boot_cpu_data.x86 != 0x15 || val > 6) {
-			pr_err("Non-existent MCE bank: %llu\n", val);
-			return -EINVAL;
-		}
+	if (val >= n_banks) {
+		pr_err("Non-existent MCE bank: %llu\n", val);
+		return -EINVAL;
 	}
 
 	m->bank = val;
@@ -187,32 +251,81 @@ static int inj_bank_set(void *data, u64 val)
 	return 0;
 }
 
-static int inj_bank_get(void *data, u64 *val)
-{
-	struct mce *m = (struct mce *)data;
+MCE_INJECT_GET(bank);
 
-	*val = m->bank;
-	return 0;
+DEFINE_SIMPLE_ATTRIBUTE(bank_fops, inj_bank_get, inj_bank_set, "%llu\n");
+
+static const char readme_msg[] =
+"Description of the files and their usages:\n"
+"\n"
+"Note1: i refers to the bank number below.\n"
+"Note2: See respective BKDGs for the exact bit definitions of the files below\n"
+"as they mirror the hardware registers.\n"
+"\n"
+"status:\t Set MCi_STATUS: the bits in that MSR control the error type and\n"
+"\t attributes of the error which caused the MCE.\n"
+"\n"
+"misc:\t Set MCi_MISC: provide auxiliary info about the error. It is mostly\n"
+"\t used for error thresholding purposes and its validity is indicated by\n"
+"\t MCi_STATUS[MiscV].\n"
+"\n"
+"addr:\t Error address value to be written to MCi_ADDR. Log address information\n"
+"\t associated with the error.\n"
+"\n"
+"cpu:\t The CPU to inject the error on.\n"
+"\n"
+"bank:\t Specify the bank you want to inject the error into: the number of\n"
+"\t banks in a processor varies and is family/model-specific, therefore, the\n"
+"\t supplied value is sanity-checked. Setting the bank value also triggers the\n"
+"\t injection.\n"
+"\n"
+"flags:\t Injection type to be performed. Writing to this file will trigger a\n"
+"\t real machine check, an APIC interrupt or invoke the error decoder routines\n"
+"\t for AMD processors.\n"
+"\n"
+"\t Allowed error injection types:\n"
+"\t  - \"sw\": Software error injection. Decode error to a human-readable \n"
+"\t    format only. Safe to use.\n"
+"\t  - \"hw\": Hardware error injection. Causes the #MC exception handler to \n"
+"\t    handle the error. Be warned: might cause system panic if MCi_STATUS[PCC] \n"
+"\t    is set. Therefore, consider setting (debugfs_mountpoint)/mce/fake_panic \n"
+"\t    before injecting.\n"
+"\n";
+
+static ssize_t
+inj_readme_read(struct file *filp, char __user *ubuf,
+		       size_t cnt, loff_t *ppos)
+{
+	return simple_read_from_buffer(ubuf, cnt, ppos,
+					readme_msg, strlen(readme_msg));
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(bank_fops, inj_bank_get, inj_bank_set, "%llu\n");
+static const struct file_operations readme_fops = {
+	.read		= inj_readme_read,
+};
 
 static struct dfs_node {
 	char *name;
 	struct dentry *d;
 	const struct file_operations *fops;
+	umode_t perm;
 } dfs_fls[] = {
-	{ .name = "status",	.fops = &status_fops },
-	{ .name = "misc",	.fops = &misc_fops },
-	{ .name = "addr",	.fops = &addr_fops },
-	{ .name = "bank",	.fops = &bank_fops },
-	{ .name = "flags",	.fops = &flags_fops },
-	{ .name = "cpu",	.fops = &extcpu_fops },
+	{ .name = "status",	.fops = &status_fops, .perm = S_IRUSR | S_IWUSR },
+	{ .name = "misc",	.fops = &misc_fops,   .perm = S_IRUSR | S_IWUSR },
+	{ .name = "addr",	.fops = &addr_fops,   .perm = S_IRUSR | S_IWUSR },
+	{ .name = "bank",	.fops = &bank_fops,   .perm = S_IRUSR | S_IWUSR },
+	{ .name = "flags",	.fops = &flags_fops,  .perm = S_IRUSR | S_IWUSR },
+	{ .name = "cpu",	.fops = &extcpu_fops, .perm = S_IRUSR | S_IWUSR },
+	{ .name = "README",	.fops = &readme_fops, .perm = S_IRUSR | S_IRGRP | S_IROTH },
 };
 
 static int __init init_mce_inject(void)
 {
 	int i;
+	u64 cap;
+
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+	n_banks = cap & MCG_BANKCNT_MASK;
 
 	dfs_inj = debugfs_create_dir("mce-inject", NULL);
 	if (!dfs_inj)
@@ -220,7 +333,7 @@ static int __init init_mce_inject(void)
 
 	for (i = 0; i < ARRAY_SIZE(dfs_fls); i++) {
 		dfs_fls[i].d = debugfs_create_file(dfs_fls[i].name,
-						    S_IRUSR | S_IWUSR,
+						    dfs_fls[i].perm,
 						    dfs_inj,
 						    &i_mce,
 						    dfs_fls[i].fops);

drivers/edac/mpc85xx_edac.c

@@ -811,6 +811,8 @@ static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc,
 	}
 }
 
+#define make64(high, low) (((u64)(high) << 32) | (low))
+
 static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 {
 	struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
@@ -818,7 +820,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	u32 bus_width;
 	u32 err_detect;
 	u32 syndrome;
-	u32 err_addr;
+	u64 err_addr;
 	u32 pfn;
 	int row_index;
 	u32 cap_high;
@@ -849,7 +851,9 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	else
 		syndrome &= 0xffff;
 
-	err_addr = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS);
+	err_addr = make64(
+		in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_EXT_ADDRESS),
+		in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS));
 	pfn = err_addr >> PAGE_SHIFT;
 
 	for (row_index = 0; row_index < mci->nr_csrows; row_index++) {
@@ -886,7 +890,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	mpc85xx_mc_printk(mci, KERN_ERR,
 			"Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
 			cap_high, cap_low, syndrome);
-	mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8x\n", err_addr);
+	mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8llx\n", err_addr);
 	mpc85xx_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn);
 
 	/* we are out of range */

drivers/edac/mpc85xx_edac.h

@@ -43,6 +43,7 @@
 #define MPC85XX_MC_ERR_INT_EN		0x0e48
 #define MPC85XX_MC_CAPTURE_ATRIBUTES	0x0e4c
 #define MPC85XX_MC_CAPTURE_ADDRESS	0x0e50
+#define MPC85XX_MC_CAPTURE_EXT_ADDRESS	0x0e54
 #define MPC85XX_MC_ERR_SBE		0x0e58
 
 #define DSC_MEM_EN	0x80000000