kbuild: Remove export-objs := ... statements

One of the goals of the whole new modversions implementation:
export-objs is gone for good!

arch/alpha/kernel/Makefile

@@ -6,8 +6,6 @@ EXTRA_TARGETS	:= head.o
 
 EXTRA_AFLAGS	:= $(CFLAGS)
 
-export-objs := alpha_ksyms.o core_marvel.o core_titan.o
-
 obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o semaphore.o \
 	    alpha_ksyms.o systbls.o err_common.o

arch/arm/common/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-export-objs := sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
-
 obj-$(CONFIG_SA1111)	+= sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
 
 obj-$(CONFIG_PCI_HOST_PLX90X0)	+= plx90x0.o

arch/arm/kernel/Makefile

@@ -15,8 +15,6 @@ obj-m		:=
 obj-n		:=
 obj-		:=
 
-export-objs	:= armksyms.o apm.o dma.o ecard.o fiq.o io.o time.o
-
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o time-acorn.o
 obj-$(CONFIG_ARCH_CLPS7500)	+= time-acorn.o

arch/arm/mach-adifcc/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:=

arch/arm/mach-anakin/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-arc/Makefile

@@ -10,8 +10,6 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= oldlatches.o
-
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 
 EXTRA_TARGETS 		:= head.o

arch/arm/mach-clps7500/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-ebsa110/Makefile

@@ -9,6 +9,4 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= io.o
-
 obj-$(CONFIG_LEDS)	+= leds.o

arch/arm/mach-epxa10db/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-footbridge/Makefile

@@ -9,8 +9,6 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= arch.o netwinder-hw.o
-
 pci-$(CONFIG_ARCH_CATS) += cats-pci.o
 pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o

arch/arm/mach-ftvpci/Makefile

@@ -9,7 +9,5 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 
-
 obj-$(CONFIG_PCI)	+= pci.o
 obj-$(CONFIG_LEDS)	+= leds.o

arch/arm/mach-iop310/Makefile

@@ -10,8 +10,6 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:=
-
 obj-$(CONFIG_ARCH_IQ80310) += iq80310-pci.o iq80310-irq.o
 
 ifneq ($(CONFIG_XSCALE_PMU_TIMER),y)

arch/arm/mach-l7200/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-pxa/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-export-objs := generic.o irq.o dma.o sa1111.o
-
 # Common support (must be linked before board specific support)
 obj-y += generic.o irq.o dma.o
 obj-$(CONFIG_SA1111) += sa1111.o

arch/arm/mach-rpc/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mach-sa1100/Makefile

@@ -9,8 +9,6 @@ obj-n :=
 obj-  :=
 led-y := leds.o
 
-export-objs := dma.o generic.o pm.o
-
 # This needs to be cleaned up.  We probably need to have SA1100
 # and SA1110 config symbols.
 ifeq ($(CONFIG_CPU_FREQ),y)
@@ -26,12 +24,10 @@ obj-$(CONFIG_SA1100_ADSBITSY)		+= adsbitsy.o
 led-$(CONFIG_SA1100_ADSBITSY)		+= leds-adsbitsy.o
 
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
-export-objs				+= assabet.o
 led-$(CONFIG_SA1100_ASSABET)		+= leds-assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
 
 obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-export-objs				+= badge4.o
 led-$(CONFIG_SA1100_BADGE4)		+= leds-badge4.o
 
 obj-$(CONFIG_SA1100_BRUTUS)		+= brutus.o
@@ -43,12 +39,9 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 obj-$(CONFIG_SA1100_EMPEG)		+= empeg.o
 
 obj-$(CONFIG_SA1100_FLEXANET)		+= flexanet.o
-export-objs				+= flexanet.o
 led-$(CONFIG_SA1100_FLEXANET)		+= leds-flexanet.o
 
 obj-$(CONFIG_SA1100_FREEBIRD)		+= freebird.o
-export-objs				+= freebird.o
-
 obj-$(CONFIG_SA1100_GRAPHICSCLIENT)	+= graphicsclient.o
 led-$(CONFIG_SA1100_GRAPHICSCLIENT)	+= leds-graphicsclient.o
 
@@ -56,13 +49,11 @@ obj-$(CONFIG_SA1100_GRAPHICSMASTER)	+= graphicsmaster.o
 led-$(CONFIG_SA1100_GRAPHICSMASTER)	+= leds-graphicsmaster.o
 
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o
-export-objs				+= h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
 led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
 
 obj-$(CONFIG_SA1100_HUW_WEBPANEL)	+= huw_webpanel.o
-export-objs				+= huw_webpanel.o
 
 obj-$(CONFIG_SA1100_ITSY)		+= itsy.o
 
@@ -93,15 +84,12 @@ obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
 led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o  
 
 obj-$(CONFIG_SA1100_STORK)		+= stork.o
-export-objs				+= stork.o
 
 obj-$(CONFIG_SA1100_TRIZEPS)		+= trizeps.o
-export-objs				+= trizeps.o
 
 obj-$(CONFIG_SA1100_XP860)		+= xp860.o
 
 obj-$(CONFIG_SA1100_YOPY)		+= yopy.o
-export-objs				+= yopy.o
 
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)

arch/arm/mach-shark/Makefile

@@ -9,6 +9,4 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 
-
 obj-$(CONFIG_LEDS)	+= leds.o

arch/arm/mach-tbox/Makefile

@@ -9,4 +9,3 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-export-objs		:= 

arch/arm/mm/Makefile

@@ -8,8 +8,6 @@ obj-y		:= init.o extable.o fault-common.o
 obj-m		:=
 obj-n		:=
 obj-		:=
-export-objs	:= proc-syms.o discontig.o
-
 ifeq ($(CONFIG_CPU_32),y)
 obj-y		+= consistent.o fault-armv.o ioremap.o mm-armv.o
 obj-$(CONFIG_MODULES) += proc-syms.o

arch/cris/kernel/Makefile

@@ -5,8 +5,6 @@
 
 EXTRA_TARGETS	:= head.o
 
-export-objs := ksyms.o
-
 obj-y   := process.o signal.o entry.o traps.o irq.o \
            ptrace.o setup.o time.o sys_cris.o shadows.o \
 	   debugport.o semaphore.o

arch/i386/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS := head.o init_task.o
 
-export-objs     := mca.o i386_ksyms.o time.o
-
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \
 		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o
@@ -34,5 +32,4 @@ obj-y				+= sysenter.o
 
 EXTRA_AFLAGS   := -traditional
 
-export-objs += scx200.o
 obj-$(CONFIG_SCx200)		+= scx200.o

arch/i386/kernel/cpu/mtrr/Makefile

@@ -3,4 +3,3 @@ obj-y		+= amd.o
 obj-y		+= cyrix.o
 obj-y		+= centaur.o
 
-export-objs	:= main.o

arch/i386/mach-voyager/Makefile

@@ -8,8 +8,6 @@
 # Note 2! The CFLAGS definitions are now in the main makefile...
 
 EXTRA_CFLAGS	+= -I../kernel
-export-objs	:=
-
 obj-y			:= setup.o voyager_basic.o voyager_thread.o
 
 obj-$(CONFIG_SMP)	+= voyager_smp.o voyager_cat.o

arch/i386/mm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux i386-specific parts of the memory manager.
 #
 
-export-objs := pageattr.o
-
 obj-y	:= init.o pgtable.o fault.o ioremap.o extable.o pageattr.o
 
 obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o

arch/ia64/hp/common/Makefile

@@ -5,6 +5,4 @@
 # Copyright (C) Alex Williamson (alex_williamson@hp.com)
 #
 
-export-objs := sba_iommu.o
-
 obj-y := sba_iommu.o

arch/ia64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs := ia64_ksyms.o
-
 obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o \
 	 irq.o irq_ia64.o irq_lsapic.o ivt.o \
 	 machvec.o pal.o process.o perfmon.o ptrace.o sal.o \

arch/ia64/lib/Makefile

@@ -4,8 +4,6 @@
 
 L_TARGET = lib.a
 
-export-objs := swiotlb.o
-
 obj-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o			\
 	checksum.o clear_page.o csum_partial_copy.o copy_page.o		\

arch/ia64/sn/io/Makefile

@@ -13,8 +13,6 @@ ifdef CONFIG_IA64_SGI_SN2
 EXTRA_CFLAGS    += -DSHUB_SWAP_WAR
 endif
 
-export-objs := hcl.o pci_dma.o
-
 obj-$(CONFIG_IA64_SGI_SN) += stubs.o sgi_if.o xswitch.o klgraph_hack.o \
 		hcl.o labelcl.o invent.o sgi_io_sim.o \
 		klgraph_hack.o hcl_util.o cdl.o hubdev.o hubspc.o \

arch/ia64/sn/kernel/Makefile

@@ -38,8 +38,6 @@ EXTRA_CFLAGS    := -DLITTLE_ENDIAN
 .S.o:
 	$(CC) $(AFLAGS) $(AFLAGS_KERNEL) -c -o $*.o $<
 
-export-objs = sn_ksyms.o iomv.o
-
 obj-y		= probe.o setup.o sn_asm.o sv.o bte.o iomv.o
 obj-$(CONFIG_IA64_SGI_SN1)      += irq.o mca.o
 obj-$(CONFIG_IA64_SGI_SN2)      += irq.o mca.o

arch/m68k/amiga/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-export-objs	:= amiga_ksyms.o
-
 obj-y		:= config.o amiints.o cia.o chipram.o amisound.o amiga_ksyms.o
 
 obj-$(CONFIG_AMIGA_PCMCIA)	+= pcmcia.o

arch/m68k/atari/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/atari source directory
 #
 
-export-objs	:= atari_ksyms.o
-
 obj-y		:= config.o time.o debug.o ataints.o stdma.o \
 			atasound.o stram.o atari_ksyms.o
 

arch/m68k/kernel/Makefile

@@ -8,8 +8,6 @@ else
   EXTRA_TARGETS := sun3-head.o
 endif 
 
-export-objs	:= setup.o m68k_ksyms.o
-
 obj-y		:= entry.o process.o traps.o ints.o signal.o ptrace.o \
 			sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o
 

arch/m68k/mac/Makefile

@@ -2,7 +2,5 @@
 # Makefile for Linux arch/m68k/mac source directory
 #
 
-export-objs	:= mac_ksyms.o
-
 obj-y		:= config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
 			baboon.o macboing.o debug.o misc.o mac_ksyms.o

arch/m68k/mvme16x/Makefile

@@ -2,6 +2,4 @@
 # Makefile for Linux arch/m68k/mvme16x source directory
 #
 
-export-objs	:= mvme16x_ksyms.o
-
 obj-y		:= config.o 16xints.o rtc.o mvme16x_ksyms.o

arch/m68k/sun3/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/sun3 source directory
 #
 
-export-objs	:= sun3_ksyms.o
-
 obj-y	:= sun3_ksyms.o sun3ints.o sun3dvma.o sbus.o idprom.o
 
 obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o \

arch/m68k/sun3x/Makefile

@@ -2,6 +2,4 @@
 # Makefile for Linux arch/m68k/sun3x source directory
 #
 
-export-objs	:= sun3x_ksyms.o
-
 obj-y		:= config.o time.o dvma.o prom.o

arch/m68knommu/kernel/Makefile

@@ -2,8 +2,6 @@
 # Makefile for arch/m68knommu/kernel.
 #
 
-export-objs := m68k_ksyms.o
-
 obj-y += entry.o init_task.o ints.o m68k_ksyms.o process.o ptrace.o \
 	 semaphore.o setup.o signal.o syscalltable.o sys_m68k.o time.o \
 	 traps.o

arch/mips/au1000/common/Makefile

@@ -6,8 +6,6 @@
 # Makefile for the Alchemy Au1000 CPU, generic files.
 #
 
-export-objs := serial.o
-
 obj-y := prom.o dbg_io.o int-handler.o irq.o puts.o time.o reset.o
 
 obj-$(CONFIG_AU1000_UART) += serial.o             

arch/mips/baget/Makefile

@@ -3,7 +3,6 @@
 # under Linux.
 #
 
-export-objs		:= vacserial.o
 obj-y			:= baget.o print.o setup.o time.o irq.o bagetIRQ.o \
 			   reset.o wbflush.o
 obj-$(CONFIG_SERIAL)	+= vacserial.o

arch/mips/dec/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the DECstation family specific parts of the kernel
 #
 
-export-objs := wbflush.o
-
 obj-y	 := int-handler.o setup.o irq.o time.o reset.o rtc-dec.o wbflush.o
 
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o

arch/mips/kernel/Makefile

@@ -5,8 +5,6 @@
 # EXTRA_AFLAGS = -mips3 -mcpu=r4000 # not used?
 
 EXTRA_TARGETS	:= head.o init_task.o
-export-objs	:= mips_ksyms.o
-
 obj-y				+= branch.o process.o signal.o entry.o \
 				   traps.o ptrace.o vm86.o ioport.o reset.o \
 				   semaphore.o setup.o syscall.o sysmips.o \

arch/mips/mm/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the Linux/MIPS-specific parts of the memory manager.
 #
 
-export-objs			+= ioremap.o umap.o
 obj-y				+= extable.o init.o ioremap.o fault.o loadmmu.o
 
 obj-$(CONFIG_CPU_R3000)		+= r2300.o

arch/mips64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs	:= mips64_ksyms.o
-
 obj-y	:= branch.o entry.o proc.o process.o ptrace.o r4k_cache.o r4k_fpu.o \
 	   r4k_genex.o r4k_switch.o r4k_tlb.o r4k_tlb_debug.o r4k_tlb_glue.o \
 	   scall_64.o semaphore.o setup.o signal.o softfp.o syscall.o \

arch/mips64/mm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux/MIPS-specific parts of the memory manager.
 #
 
-export-objs			+= umap.o
-
 obj-y				:= extable.o init.o fault.o loadmmu.o
 
 obj-$(CONFIG_CPU_R4300)		+= r4xx0.o

arch/parisc/kernel/Makefile

@@ -9,8 +9,6 @@ EXTRA_TARGETS	:= init_task.o pdc_cons.o process.o unaligned.o $(head-y)
 AFLAGS_entry.o	:= -traditional
 AFLAGS_pacache.o := -traditional
 
-export-objs	:= parisc_ksyms.o
-
 obj-y	     	:= cache.o pacache.o setup.o traps.o time.o irq.o \
 		   pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
 		   ptrace.o hardware.o inventory.o drivers.o semaphore.o \

arch/ppc/8xx_io/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux MPC8xx ppc-specific parts of comm processor
 #
 
-export-objs		:= fec.o
-
 obj-y			:= commproc.o uart.o
 
 obj-$(CONFIG_FEC_ENET)	+= fec.o

arch/ppc/amiga/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-export-objs	:= amiga_ksyms.o
-
 obj-y		:= config.o amiints.o cia.o time.o bootinfo.o amisound.o \
 			chipram.o amiga_ksyms.o
 

arch/ppc/kernel/Makefile

@@ -17,8 +17,6 @@ HEAD-$(CONFIG_6xx)		+= idle_6xx.o
 
 EXTRA_TARGETS	:= $(HEAD-y)
 
-export-objs			:= ppc_ksyms.o time.o
-
 obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
 					process.o signal.o ptrace.o align.o \
 					semaphore.o syscalls.o setup.o \

arch/ppc/lib/Makefile

@@ -2,8 +2,6 @@
 # Makefile for ppc-specific library files..
 #
 
-export-objs		:= dec_and_lock.o
-
 obj-y			:= checksum.o string.o strcase.o dec_and_lock.o div64.o
 
 obj-$(CONFIG_SMP)	+= locks.o

arch/ppc/ocp/Makefile

@@ -9,6 +9,5 @@
 #
 # NB: cribbed from the drivers/sbus/Makefile -- PMM
 
-export-objs := ocp.o ocp-driver.o ocp-probe.o
 obj-y   	+= ocp.o ocp-driver.o ocp-probe.o
 

arch/ppc/platforms/4xx/Makefile

 #
 # Makefile for the PowerPC 4xx linux kernel.
 
-export-objs			:= ibm405lp.o
-
 obj-$(CONFIG_ASH)		+= ash.o
 obj-$(CONFIG_BEECH)		+= beech.o 
 obj-$(CONFIG_CEDAR)		+= cedar.o

arch/ppc/platforms/Makefile

@@ -12,8 +12,6 @@ endif
 # Extra CFLAGS so we don't have to do relative includes
 CFLAGS_pmac_setup.o	+= -I$(TOPDIR)/arch/$(ARCH)/mm
 
-export-objs			:= prep_setup.o
-
 obj-$(CONFIG_APUS)		+= apus_setup.o
 ifeq ($(CONFIG_APUS),y)
 obj-$(CONFIG_PCI)		+= apus_pci.o

arch/ppc/syslib/Makefile

@@ -12,8 +12,6 @@ endif
 CFLAGS_prom_init.o      += -mrelocatable-lib
 CFLAGS_btext.o          += -mrelocatable-lib
 
-export-objs			:=  ppc4xx_dma.o ppc4xx_pm.o
-
 obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
 ifeq ($(CONFIG_4xx),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pic.o

arch/ppc64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_CFLAGS	+= -mno-minimal-toc
 EXTRA_TARGETS	:= head.o
-export-objs	:= ppc_ksyms.o
-
 obj-y               :=	setup.o entry.o traps.o irq.o idle.o \
 			time.o process.o signal.o syscalls.o misc.o ptrace.o \
 			align.o semaphore.o bitops.o stab.o htab.o pacaData.o \

arch/ppc64/lib/Makefile

@@ -4,7 +4,5 @@
 
 L_TARGET = lib.a
 
-export-objs := dec_and_lock.o
-
 obj-y := checksum.o dec_and_lock.o string.o strcase.o
 obj-y += copypage.o memcpy.o copyuser.o

arch/s390/kernel/Makefile

@@ -5,7 +5,6 @@
 EXTRA_TARGETS	:= head.o init_task.o
 EXTRA_AFLAGS	:= -traditional
 
-export-objs	:= debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o
 obj-y	:= entry.o bitmap.o traps.o time.o process.o \
             setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
             semaphore.o reipl.o s390_ext.o debug.o

arch/s390x/kernel/Makefile

@@ -5,9 +5,6 @@
 EXTRA_TARGETS	:= head.o init_task.o
 EXTRA_AFLAGS	:= -traditional
 
-export-objs	:= debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o \
-		   exec32.o
-
 obj-y		:= entry.o bitmap.o traps.o time.o process.o \
 		   setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
 		   semaphore.o reipl.o s390_ext.o debug.o

arch/sh/kernel/Makefile

@@ -4,9 +4,6 @@
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs	:= io.o io_generic.o io_hd64465.o setup_hd64465.o sh_ksyms.o \
-		   io_adx.o io_bigsur.o io_cat68701.o hd64465_gpio.o
-
 obj-y	:= process.o signal.o entry.o traps.o irq.o irq_ipr.o \
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \
 	irq_imask.o io.o io_generic.o sh_ksyms.o

arch/sparc/kernel/Makefile

@@ -6,7 +6,6 @@ EXTRA_TARGETS	:= head.o init_task.o
 
 EXTRA_AFLAGS	:= -ansi
 
-export-objs := sparc_ksyms.o
 IRQ_OBJS := irq.o sun4m_irq.o sun4c_irq.o sun4d_irq.o
 obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
 	    process.o signal.o ioport.o setup.o idprom.o \

arch/sparc64/kernel/Makefile

@@ -6,7 +6,6 @@ EXTRA_AFLAGS := -ansi
 
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs	:= sparc64_ksyms.o ebus.o
 obj-y		:= process.o setup.o cpu.o idprom.o \
 		   traps.o devices.o auxio.o \
 		   irq.o ptrace.o time.o sys_sparc.o signal.o \

arch/um/drivers/Makefile

@@ -20,8 +20,6 @@ ubd-objs := ubd_kern.o ubd_user.o
 port-objs := port_kern.o port_user.o
 harddog-objs := harddog_kern.o harddog_user.o
 
-export-objs := mconsole_kern.o
-
 obj-y = 
 obj-$(CONFIG_SSL) += ssl.o 
 obj-$(CONFIG_UML_NET_SLIP) += slip.o

arch/um/kernel/Makefile

@@ -36,10 +36,6 @@ UNMAP_CFLAGS := $(patsubst -fprofile-arcs -ftest-coverage,,$(UNMAP_CFLAGS))
 DMODULES-$(CONFIG_MODULES) = -D__CONFIG_MODULES__
 DMODVERSIONS-$(CONFIG_MODVERSIONS) = -D__CONFIG_MODVERSIONS__
 
-export-objs-$(CONFIG_GPROF) += gprof_syms.o
-export-objs-$(CONFIG_GCOV) += gmon_syms.o
-
-export-objs := ksyms.o process_kern.o signal_kern.o $(export-objs-y)
 
 CFLAGS_user_syms.o = -D__AUTOCONF_INCLUDED__ $(DMODULES-y) $(DMODVERSIONS-y) \
 	-I/usr/include -I../include

arch/um/kernel/tt/Makefile

@@ -9,8 +9,6 @@ obj-y = exec_kern.o exec_user.o gdb.o gdb_kern.o ksyms.o mem.o process_kern.o \
 
 obj-$(CONFIG_PT_PROXY) += ptproxy/
 
-export-objs = ksyms.o
-
 USER_OBJS := $(filter %_user.o,$(obj-y)) gdb.o time.o tracer.o
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 

arch/um/sys-i386/Makefile

@@ -3,8 +3,6 @@ obj-y = bugs.o checksum.o extable.o fault.o ksyms.o ldt.o module.o \
 
 obj-$(CONFIG_HIGHMEM) += highmem.o
 
-export-objs = ksyms.o
-
 USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 

arch/v850/kernel/Makefile

@@ -13,8 +13,6 @@ EXTRA_TARGETS := head.o init_task.o
 
 obj-y += intv.o entry.o process.o syscalls.o time.o semaphore.o setup.o \
 	 signal.o irq.o mach.o ptrace.o bug.o
-export-objs += v850_ksyms.o rte_mb_a_pci.o
-
 obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
 # chip-specific code
 obj-$(CONFIG_V850E_MA1)		+= ma.o	nb85e_utils.o nb85e_timer_d.o

arch/x86_64/ia32/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-export-objs := ia32_ioctl.o sys_ia32.o
-
 obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \
 	ia32_signal.o \
 	ia32_binfmt.o fpu32.o socket32.o ptrace32.o ipc32.o syscall32.o

arch/x86_64/kernel/Makefile

@@ -4,8 +4,6 @@
 
 EXTRA_TARGETS 	:= head.o head64.o init_task.o
 EXTRA_AFLAGS  := -traditional
-export-objs     := x8664_ksyms.o pci-gart.o pci-dma.o
-
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_x86_64.o \
 		pci-dma.o x8664_ksyms.o i387.o syscall.o vsyscall.o \

arch/x86_64/kernel/mtrr/Makefile

@@ -7,8 +7,6 @@ obj-y		+= amd.o
 obj-y		+= cyrix.o
 obj-y		+= centaur.o
 
-export-objs	:= main.o
-
 $(obj)/main.c: $(obj)/mtrr.h
 	@ln -sf ../../../i386/kernel/cpu/mtrr/main.c $(obj)/main.c
 $(obj)/if.c: $(obj)/mtrr.h

arch/x86_64/lib/Makefile

@@ -3,8 +3,6 @@
 #
 
 L_TARGET := lib.a
-export-objs := io.o csum-wrappers.o csum-partial.o
-
 CFLAGS_csum-partial.o := -funroll-loops
 
 obj-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \

arch/x86_64/mm/Makefile

@@ -2,7 +2,5 @@
 # Makefile for the linux i386-specific parts of the memory manager.
 #
 
-export-objs := pageattr.o
-
 obj-y	 := init.o fault.o ioremap.o extable.o pageattr.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o

crypto/Makefile

@@ -2,8 +2,6 @@
 # Cryptographic API
 #
 
-export-objs := api.o hmac.o
-
 autoload-crypto-$(CONFIG_KMOD) = autoload.o
 proc-crypto-$(CONFIG_PROC_FS) = proc.o
 

drivers/acorn/scsi/Makefile

@@ -2,7 +2,6 @@
 # Makefile for drivers/acorn/scsi
 #
 
-export-objs		:= fas216.o queue.o msgqueue.o
 acornscsi_mod-objs	:= acornscsi.o acornscsi-io.o
 
 obj-$(CONFIG_SCSI_ACORNSCSI_3)	+= acornscsi_mod.o queue.o msgqueue.o

drivers/acpi/Makefile

@@ -12,8 +12,6 @@ endif
 
 EXTRA_CFLAGS	+= $(ACPI_CFLAGS)
 
-export-objs 	:= acpi_ksyms.o processor.o
-
 obj-y		:= acpi_ksyms.o 
 
 #

drivers/atm/Makefile

@@ -4,7 +4,6 @@
 
 EXTRA_CFLAGS := -g
 
-export-objs	:= uPD98402.o suni.o idt77105.o
 fore_200e-objs	:= fore200e.o
 host-progs	:= fore200e_mkfirm
 

drivers/base/Makefile

 # Makefile for the Linux device tree
 
-obj-y		:= core.o sys.o interface.o power.o bus.o \
-			driver.o class.o intf.o platform.o \
-			cpu.o firmware.o
-
+obj-y			:= core.o sys.o interface.o power.o bus.o \
+			   driver.o class.o intf.o platform.o \
+			   cpu.o firmware.o
 obj-$(CONFIG_NUMA)	+= node.o  memblk.o
-
-obj-y		+= fs/
-
+obj-y			+= fs/
 obj-$(CONFIG_HOTPLUG)	+= hotplug.o
-
-export-objs	:= core.o power.o sys.o bus.o driver.o \
-			class.o intf.o platform.o firmware.o

drivers/base/fs/Makefile

 obj-y		:= device.o
 
-export-objs	:= device.o

drivers/block/Makefile

@@ -8,9 +8,6 @@
 # In the future, some of these should be built conditionally.
 #
 
-export-objs	:= elevator.o ll_rw_blk.o loop.o genhd.o acsi.o \
-		   scsi_ioctl.o deadline-iosched.o
-
 obj-y	:= elevator.o ll_rw_blk.o ioctl.o genhd.o scsi_ioctl.o deadline-iosched.o
 
 obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o

drivers/block/paride/Makefile

@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-export-objs := paride.o
-
 obj-$(CONFIG_PARIDE)		+= paride.o
 obj-$(CONFIG_PARIDE_ATEN)	+= aten.o
 obj-$(CONFIG_PARIDE_BPCK)	+= bpck.o

drivers/cdrom/Makefile

@@ -3,22 +3,6 @@
 # 30 Jan 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
 # Rewritten to use lists instead of if-statements.
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs	:= cdrom.o
-
-
-
-# Object file lists.
-
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
-
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_BLK_DEV_IDECD)	+=              cdrom.o

drivers/char/Makefile

@@ -9,13 +9,6 @@ FONTMAPFILE = cp437.uni
 
 obj-y	 += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs     :=	busmouse.o vt.o generic_serial.o ip2main.o consolemap.o\
-			ite_gpio.o keyboard.o misc.o nvram.o random.o rtc.o \
-			selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o
-
 obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o consolemap.o consolemap_deftbl.o selection.o keyboard.o
 obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
 obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o

drivers/char/agp/Makefile

@@ -3,8 +3,6 @@
 # space ioctl interface to use agp memory.  It also adds a kernel interface
 # that other drivers could use to manipulate agp memory.
 
-export-objs := backend.o
-
 agpgart-y := backend.o frontend.o generic.o
 agpgart-$(CONFIG_AGP3) += generic-3.0.o
 agpgart-objs := $(agpgart-y)

drivers/char/ftape/lowlevel/Makefile

@@ -23,8 +23,6 @@
 #      driver for Linux.
 #
 
-export-objs := ftape_syms.o
-
 obj-$(CONFIG_FTAPE) += ftape.o
 
 ftape-objs := ftape-init.o fdc-io.o fdc-isr.o \

drivers/char/ftape/zftape/Makefile

@@ -27,8 +27,6 @@
 # ZFT_OBSOLETE - enable the MTIOC_ZFTAPE_GETBLKSZ ioctl. You should
 #                leave this enabled for compatibility with taper.
 
-export-objs := zftape_syms.o
-
 obj-$(CONFIG_ZFTAPE) += zftape.o
 
 zftape-objs := zftape-rw.o zftape-ctl.o zftape-read.o \

drivers/char/ipmi/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the ipmi drivers.
 #
 
-export-objs	:= ipmi_msghandler.o ipmi_watchdog.o
-
 ipmi_kcs_drv-objs := ipmi_kcs_sm.o ipmi_kcs_intf.o
 
 obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o

drivers/eisa/Makefile

@@ -2,8 +2,6 @@
 
 obj-$(CONFIG_EISA)	+= eisa-bus.o
 
-export-objs	:= eisa-bus.o
-
 clean-files:= devlist.h
 
 # Ugly hack to get DEVICE_NAME_SIZE value...

drivers/fc4/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux Fibre Channel device drivers.
 #
 
-export-objs := fc_syms.o
-
 fc4-objs := fc.o fc_syms.o
 
 obj-$(CONFIG_FC4) += fc4.o

drivers/hotplug/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux kernel pci hotplug controller drivers.
 #
 
-export-objs	:= pci_hotplug_core.o pci_hotplug_util.o cpci_hotplug_core.o
-
 obj-$(CONFIG_HOTPLUG_PCI)		+= pci_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_COMPAQ)	+= cpqphp.o
 obj-$(CONFIG_HOTPLUG_PCI_IBM)		+= ibmphp.o

drivers/i2c/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the kernel i2c bus driver.
 #
 
-export-objs	:= i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
-		   i2c-algo-ite.o i2c-proc.o i2c-algo-ibm_ocp.o
-
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o

drivers/ide/Makefile

@@ -7,8 +7,6 @@
 # Note : at this point, these files are compiled on all systems.
 # In the future, some of these should be built conditionally.
 #
-export-objs := ide-iops.o ide-taskfile.o ide-proc.o ide.o ide-probe.o ide-dma.o ide-lib.o setup-pci.o ide-io.o
-
 # First come modules that register themselves with the core
 obj-$(CONFIG_BLK_DEV_IDEPCI)		+= pci/
 

drivers/ieee1394/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux IEEE 1394 implementation
 #
 
-export-objs := ieee1394_core.o ohci1394.o cmp.o
-
 ieee1394-objs := ieee1394_core.o ieee1394_transactions.o hosts.o \
 		 highlevel.o csr.o nodemgr.o oui.o dma.o iso.o
 

drivers/input/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the input core drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= input.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT)		+= input.o

drivers/input/gameport/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the gameport drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= gameport.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_GAMEPORT)		+= gameport.o

drivers/input/serio/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the input core drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= serio.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_SERIO)		+= serio.o

drivers/isdn/capi/Makefile

 # Makefile for the CAPI subsystem.
 
-# Objects that export symbols.
-
-export-objs	:= kcapi.o capiutil.o capilib.o capifs.o
-
 # Ordering constraints: kernelcapi.o first
 
 # Each configuration option enables a list of files.

drivers/isdn/eicon/Makefile

 # Makefile for the eicon ISDN device driver
 
-# Objects that export symbols.
-
-export-objs	:= Divas_mod.o eicon_mod.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_EICON_OLD)    	+= eicon.o

drivers/isdn/hardware/avm/Makefile

 # Makefile for the AVM ISDN device drivers
 
-# Objects that export symbols.
-
-export-objs	:= b1dma.o b1pcmcia.o b1.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_AVMB1_B1ISA)	+= b1isa.o b1.o

drivers/isdn/hardware/eicon/Makefile

 # Makefile for the Eicon DIVA ISDN drivers.
 
-# Objects that export symbols.
-
-export-objs     := diva_didd.o
-
 # Multipart objects. 
 
 divas-objs      := divasmain.o divasfunc.o di.o io.o istream.o diva.o dlist.o divasproc.o diva_dma.o

drivers/isdn/hisax/Makefile

@@ -4,10 +4,6 @@
 
 EXTRA_CFLAGS      += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
 
-# Objects that export symbols.
-
-export-objs	  := config.o hisax_isac.o hisax_hscx.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax.o

drivers/isdn/i4l/Makefile

 # Makefile for the kernel ISDN subsystem and device drivers.
 
-# Objects that export symbols.
-
-export-objs	:= isdn_common.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN)			+= isdn.o

drivers/macintosh/Makefile

@@ -2,17 +2,6 @@
 # Makefile for the Macintosh-specific device drivers.
 #
 
-# Objects that export symbols.
-
-export-objs	:= adb.o mac_hid.o via-pmu.o
-
-# Object file lists.
-
-obj-y	:=
-obj-m	:=
-obj-n	:=
-obj-	:=
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_PMAC_PBOOK)	+= mediabay.o

drivers/mca/Makefile

@@ -5,4 +5,3 @@ obj-y	:= mca-bus.o mca-device.o mca-driver.o
 obj-$(CONFIG_MCA_PROC_FS)	+= mca-proc.o
 obj-$(CONFIG_MCA_LEGACY)	+= mca-legacy.o
 
-export-objs	:= mca-bus.o mca-legacy.o mca-proc.o mca-driver.o

drivers/md/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the kernel software RAID and LVM drivers.
 #
 
-export-objs	:= md.o xor.o dm-table.o dm-target.o
 dm-mod-objs	:= dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \
 		   dm-ioctl.o
 

drivers/media/dvb/dvb-core/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the kernel DVB device drivers.
 #
 
-export-objs     := dvb_ksyms.o
-
 dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
 		dvb_frontend.o dvb_i2c.o dvb_net.o dvb_ksyms.o
 

drivers/media/radio/Makefile

@@ -2,11 +2,6 @@
 # Makefile for the kernel character device drivers.
 #
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs     := miropcm20-rds-core.o
-
 miropcm20-objs	:= miropcm20-rds-core.o miropcm20-radio.o
 
 obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o

drivers/media/video/Makefile

@@ -2,12 +2,6 @@
 # Makefile for the video capture/playback device drivers.
 #
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs     :=	videodev.o v4l2-common.o v4l1-compat.o \
-			bttv-if.o cpia.o video-buf.o
-
 bttv-objs	:=	bttv-driver.o bttv-cards.o bttv-if.o \
 			bttv-risc.o bttv-vbi.o
 zoran-objs      :=	zr36120.o zr36120_i2c.o zr36120_mem.o

drivers/message/fusion/Makefile

@@ -46,8 +46,6 @@ EXTRA_CFLAGS += ${MPT_CFLAGS}
 
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
-export-objs	:= mptbase.o mptscsih.o mptlan.o mptctl.o isense.o
-
 obj-$(CONFIG_FUSION)		+= mptbase.o mptscsih.o
 obj-$(CONFIG_FUSION_ISENSE)	+= isense.o
 obj-$(CONFIG_FUSION_CTL)	+= mptctl.o

drivers/message/i2o/Makefile

@@ -5,8 +5,6 @@
 # In the future, some of these should be built conditionally.
 #
 
-export-objs	:= i2o_core.o
-
 obj-$(CONFIG_I2O_PCI)	+= i2o_pci.o
 obj-$(CONFIG_I2O)	+= i2o_core.o i2o_config.o
 obj-$(CONFIG_I2O_BLOCK)	+= i2o_block.o

drivers/mtd/Makefile

@@ -4,8 +4,6 @@
 # Based on:
 # $Id: Makefile,v 1.66 2002/04/23 13:52:14 mag Exp $
 
-export-objs	:= mtdcore.o mtdpart.o redboot.o cmdline.o afs.o mtdconcat.o
-
 obj-y           += chips/ maps/ devices/ nand/
 
 #                       *** BIG UGLY NOTE ***

drivers/mtd/chips/Makefile

@@ -3,8 +3,6 @@
 #
 # $Id: Makefile,v 1.7 2001/10/05 06:53:51 dwmw2 Exp $
 
-export-objs	:= chipreg.o gen_probe.o
-
 #                       *** BIG UGLY NOTE ***
 #
 # The removal of get_module_symbol() and replacement with

drivers/mtd/nand/Makefile

@@ -3,8 +3,6 @@
 #
 # $Id: Makefile,v 1.5 2001/09/19 22:39:59 dwmw2 Exp $
 
-export-objs	:= nand.o nand_ecc.o
-
 nandobjs-y			:= nand.o
 nandobjs-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o
 

drivers/net/Makefile

@@ -2,12 +2,6 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs     :=	8390.o arlan.o aironet4500_core.o aironet4500_card.o \
-			ppp_async.o ppp_generic.o slhc.o pppox.o auto_irq.o \
-			net_init.o mii.o
 rcpci-objs	:=	rcpci45.o rclanmtl.o
 
 ifeq ($(CONFIG_ISDN_PPP),y)

drivers/net/appletalk/Makefile

@@ -2,8 +2,6 @@
 # Makefile for drivers/net/appletalk
 #
 
-export-objs :=
-
 obj-$(CONFIG_IPDDP) += ipddp.o
 obj-$(CONFIG_COPS) += cops.o
 obj-$(CONFIG_LTPC) += ltpc.o

drivers/net/arcnet/Makefile

 # Makefile for linux/drivers/net/arcnet
 #
 
-export-objs := arcnet.o com20020.o
-
 obj-$(CONFIG_ARCNET) += arcnet.o
 obj-$(CONFIG_ARCNET_1201) += rfc1201.o
 obj-$(CONFIG_ARCNET_1051) += rfc1051.o

drivers/net/hamradio/Makefile

@@ -10,8 +10,6 @@
 #		Christoph Hellwig <hch@infradead.org>
 #
 
-export-objs	= hdlcdrv.o
-
 obj-$(CONFIG_DMASCC)		+= dmascc.o
 obj-$(CONFIG_SCC)		+= scc.o
 obj-$(CONFIG_MKISS)		+= mkiss.o

drivers/net/irda/Makefile

@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-export-objs	= irport.o sir_core.o
-
 # Old SIR drivers (irtty is broken)
 obj-$(CONFIG_IRTTY_OLD)		+= irtty.o
 obj-$(CONFIG_IRPORT_SIR)	+= 		irport.o

drivers/net/pcmcia/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the Linux PCMCIA network device drivers.
 #
 
-# Things that need to export symbols
-export-objs	:= ray_cs.o
-
 # 16-bit client drivers
 obj-$(CONFIG_PCMCIA_3C589)	+= 3c589_cs.o
 obj-$(CONFIG_PCMCIA_3C574)	+= 3c574_cs.o

drivers/net/tokenring/Makefile

@@ -2,8 +2,6 @@
 # Makefile for drivers/net/tokenring
 #
 
-export-objs := tms380tr.o
-
 obj-$(CONFIG_IBMTR) 	+= ibmtr.o
 obj-$(CONFIG_IBMOL) 	+= olympic.o
 obj-$(CONFIG_IBMLS) 	+= lanstreamer.o

drivers/net/wan/Makefile

@@ -5,9 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-export-objs :=	z85230.o syncppp.o comx.o sdladrv.o cycx_drv.o hdlc_generic.o \
-		dlci.o
-
 wanpipe-y			:= sdlamain.o sdla_ft1.o
 wanpipe-$(CONFIG_WANPIPE_X25)	+= sdla_x25.o
 wanpipe-$(CONFIG_WANPIPE_FR)	+= sdla_fr.o

drivers/net/wireless/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the Linux Wireless network device drivers.
 #
 
-# Things that need to export symbols
-export-objs	:= airo.o orinoco.o hermes.o
-
 # Obsolete cards
 obj-$(CONFIG_WAVELAN)		+= wavelan.o
 obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave_cs.o

drivers/nubus/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the nubus specific drivers.
 #
 
-export-objs := nubus_syms.o
-
 obj-y   := nubus.o
 
 obj-$(CONFIG_MODULES) += nubus_syms.o 

drivers/parisc/Makefile

@@ -2,8 +2,6 @@
 # Makefile for most of the non-PCI devices in PA-RISC machines
 #
 
-export-objs			:= gsc.o superio.o
-
 obj-y :=
 obj-m :=
 obj-n :=

drivers/parport/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the kernel Parallel port device drivers.
 #
 
-export-objs	:= init.o parport_pc.o
-
 parport-objs	:= share.o ieee1284.o ieee1284_ops.o init.o procfs.o
 
 ifeq ($(CONFIG_PARPORT_1284),y)

drivers/pci/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the PCI bus specific drivers.
 #
 
-export-objs	:= access.o hotplug.o pci-driver.o pci.o pool.o \
-			probe.o proc.o search.o setup-bus.o
-
 obj-y		+= access.o probe.o pci.o pool.o quirks.o \
 			names.o pci-driver.o search.o hotplug.o
 obj-$(CONFIG_PM)  += power.o

drivers/pcmcia/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the kernel pcmcia subsystem (c/o David Hinds)
 #
 
-export-objs := ds.o cs.o yenta.o sa1100_generic.o
-
 obj-$(CONFIG_PCMCIA)			+= pcmcia_core.o ds.o
 ifeq ($(CONFIG_CARDBUS),y)
   obj-$(CONFIG_PCMCIA) 			+= yenta_socket.o

drivers/pnp/Makefile

@@ -9,4 +9,3 @@ obj-y		:= core.o driver.o resource.o interface.o quirks.o names.o system.o $(pnp
 obj-$(CONFIG_PNPBIOS)		+= pnpbios/
 obj-$(CONFIG_ISAPNP)		+= isapnp/
 
-export-objs	:= core.o driver.o resource.o $(pnp-card-y)

drivers/pnp/isapnp/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the kernel ISAPNP driver.
 #
 
-export-objs := core.o compat.o
-
 isapnp-proc-$(CONFIG_PROC_FS) = proc.o
 
 obj-y := core.o compat.o $(isapnp-proc-y)

drivers/pnp/pnpbios/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the kernel PNPBIOS driver.
 #
 
-export-objs := core.o
-
 pnpbios-proc-$(CONFIG_PROC_FS) = proc.o
 
 obj-y := core.o $(pnpbios-proc-y)

drivers/s390/block/Makefile

@@ -2,8 +2,6 @@
 # S/390 block devices
 #
 
-export-objs := dasd.o dasd_devmap.o dasd_ioctl.o dasd_erp.o
-
 dasd_eckd_mod-objs := dasd_eckd.o dasd_3990_erp.o dasd_9343_erp.o
 dasd_fba_mod-objs  := dasd_fba.o dasd_3370_erp.o dasd_9336_erp.o
 dasd_diag_mod-objs := dasd_diag.o

drivers/s390/char/Makefile

@@ -2,8 +2,6 @@
 # S/390 character devices
 #
 
-export-objs := sclp.o tape_core.o tape_devmap.o tape_std.o
-
 tub3270-objs := tuball.o tubfs.o tubtty.o \
                      tubttyaid.o tubttybld.o tubttyscl.o \
                      tubttyrcl.o tubttysiz.o

drivers/s390/cio/Makefile

@@ -3,15 +3,8 @@
 #
 
 obj-y += airq.o blacklist.o chsc.o cio.o css.o requestirq.o 
-export-objs += airq.o css.o cio.o requestirq.o
-
 ccw_device-objs += device.o device_fsm.o device_ops.o
 ccw_device-objs += device_id.o device_pgid.o device_status.o
 obj-y += ccw_device.o
-export-objs += device.o device_ops.o 
-
 obj-$(CONFIG_CCWGROUP) += ccwgroup.o
-export-objs += ccwgroup.o
-
 obj-$(CONFIG_QDIO) += qdio.o
-export-objs += qdio.o

drivers/s390/net/Makefile

@@ -2,8 +2,6 @@
 # S/390 network devices
 #
 
-export-objs := iucv.o fsm.o cu3088.o
-
 ctc-objs := ctcmain.o ctctty.o
 
 obj-$(CONFIG_IUCV) += iucv.o fsm.o

drivers/sbus/char/Makefile

@@ -7,8 +7,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-export-objs := bbc_i2c.o
-
 vfc-objs := vfc_dev.o vfc_i2c.o
 bbc-objs := bbc_i2c.o bbc_envctrl.o
 

drivers/scsi/Makefile

@@ -18,8 +18,6 @@ CFLAGS_aha152x.o =   -DAHA152X_STAT -DAUTOCONF
 CFLAGS_gdth.o    = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
 CFLAGS_seagate.o =   -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
 
-export-objs	:= scsi_syms.o scsi_proc.o 53c700.o
-
 subdir-$(CONFIG_PCMCIA)		+= pcmcia
 
 obj-$(CONFIG_SCSI)		+= scsi_mod.o

drivers/serial/Makefile

@@ -4,8 +4,6 @@
 #  $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
 #
 
-export-objs	:= core.o 8250.o 8250_pci.o suncore.o
-
 serial-8250-y :=
 serial-8250-$(CONFIG_GSC) += 8250_gsc.o
 serial-8250-$(CONFIG_PCI) += 8250_pci.o

drivers/sgi/char/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-export-objs	:= newport.o shmiq.o sgicons.o usema.o rrm.o
 obj-y		:= newport.o shmiq.o sgicons.o usema.o streamable.o
 
 obj-$(CONFIG_SGI_SERIAL)	+= sgiserial.o

drivers/tc/Makefile

@@ -2,11 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs	:= tc.o
-
 # Object file lists.
 
 obj-$(CONFIG_TC) += tc.o

drivers/telephony/Makefile

@@ -2,8 +2,6 @@
 # Makefile for drivers/telephony
 #
 
-export-objs := phonedev.o ixj.o
-
 obj-$(CONFIG_PHONE) += phonedev.o
 obj-$(CONFIG_PHONE_IXJ) += ixj.o
 obj-$(CONFIG_PHONE_IXJ_PCMCIA) += ixj_pcmcia.o

drivers/usb/core/Makefile

@@ -2,8 +2,6 @@
 # Makefile for USB Core files and filesystem
 #
 
-export-objs	:= usb.o hcd.o hcd-pci.o urb.o message.o file.o buffer.o
-
 usbcore-objs	:= usb.o usb-debug.o hub.o hcd.o urb.o message.o \
 			config.o file.o buffer.o driverfs.o
 

drivers/usb/media/Makefile

@@ -2,8 +2,6 @@
 # Makefile for USB Media drivers
 #
 
-export-objs	:= ov511.o pwc-uncompress.o usbvideo.o
-
 pwc-objs	:= pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o
 
 obj-$(CONFIG_USB_DABUSB)	+= dabusb.o

drivers/usb/serial/Makefile

@@ -30,7 +30,4 @@ obj-$(CONFIG_USB_SERIAL_IR)			+= ir-usb.o
 obj-$(CONFIG_USB_SERIAL_KLSI)			+= kl5kusb105.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 
-# Objects that export symbols.
-export-objs	:= usb-serial.o ezusb.o
-
 usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)

drivers/video/Makefile

@@ -2,12 +2,6 @@
 # 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
 # Rewritten to use lists instead of if-statements.
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs    	:= fbmem.o fbcmap.o fbmon.o modedb.o softcursor.o cfbfillrect.o \
-		   cfbcopyarea.o cfbimgblt.o cyber2000fb.o vgastate.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_VT)		  += console/

drivers/video/console/Makefile

@@ -2,11 +2,6 @@
 # 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
 # Rewritten to use lists instead of if-statements.
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs    	:= fbcon.o fonts.o
-
 # Font handling
 font-objs := fonts.o
 

drivers/video/matrox/Makefile

@@ -2,11 +2,6 @@
 # 5 Aug 1999, James Simmons, <mailto:jsimmons@edgeglobal.com>
 # Rewritten to use lists instead of if-statements.
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs    :=  matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o g450_pll.o matroxfb_g450.o
-
 # Each configuration option enables a list of files.
 
 my-obj-$(CONFIG_FB_MATROX_G100)	  += g450_pll.o

drivers/video/sis/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the SiS framebuffer device driver
 #
 
-export-objs := sis_main.o
-
 obj-$(CONFIG_FB_SIS) += sisfb.o
 
 sisfb-objs := sis_main.o sis_accel.o init.o init301.o

drivers/zorro/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Zorro bus specific drivers.
 #
 
-export-objs		:= zorro.o
-
 obj-$(CONFIG_ZORRO)	+= zorro.o names.o
 obj-$(CONFIG_PROC_FS)	+= proc.o
 

fs/Makefile

@@ -5,9 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 # 
 
-export-objs :=	open.o dcache.o buffer.o bio.o inode.o dquot.o mpage.o aio.o \
-                fcntl.o read_write.o dcookies.o mbcache.o posix_acl.o xattr_acl.o
-
 obj-y :=	open.o read_write.o file_table.o buffer.o \
 		bio.o super.o block_dev.o char_dev.o stat.o exec.o pipe.o \
 		namei.o fcntl.o ioctl.o readdir.o select.o fifo.o locks.o \

fs/devfs/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux devfs-filesystem routines.
 #
 
-export-objs := base.o util.o
-
 obj-$(CONFIG_DEVFS_FS) += devfs.o
 
 devfs-objs := base.o util.o

fs/exportfs/Makefile

 #
 # Makefile for the filesystem export support routines.
 
-export-objs := expfs.o
-
 obj-$(CONFIG_EXPORTFS) += exportfs.o
 
 exportfs-objs := expfs.o

fs/ext2/Makefile

@@ -7,8 +7,6 @@ obj-$(CONFIG_EXT2_FS) += ext2.o
 ext2-objs := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
 	     ioctl.o namei.o super.o symlink.o
 
-export-objs += xattr.o
-
 ifeq ($(CONFIG_EXT2_FS_XATTR),y)
 ext2-objs += xattr.o xattr_user.o
 endif

fs/ext3/Makefile

@@ -7,8 +7,6 @@ obj-$(CONFIG_EXT3_FS) += ext3.o
 ext3-objs    := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
 		ioctl.o namei.o super.o symlink.o hash.o
 
-export-objs += xattr.o
-
 ifeq ($(CONFIG_EXT3_FS_XATTR),y)
 ext3-objs += xattr.o xattr_user.o
 endif

fs/fat/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux fat filesystem support.
 #
 
-export-objs := fatfs_syms.o
-
 obj-$(CONFIG_FAT_FS) += fat.o
 
 fat-objs := cache.o dir.o file.o inode.o misc.o fatfs_syms.o

fs/jbd/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux journaling routines.
 #
 
-export-objs := journal.o
-
 obj-$(CONFIG_JBD) += jbd.o
 
 jbd-objs := transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o

fs/lockd/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux lock manager stuff
 #
 
-export-objs := lockd_syms.o
-
 obj-$(CONFIG_LOCKD) += lockd.o
 
 lockd-objs-y := clntlock.o clntproc.o host.o svc.o svclock.o svcshare.o \

fs/msdos/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux msdos filesystem routines.
 #
 
-export-objs := msdosfs_syms.o
-
 obj-$(CONFIG_MSDOS_FS) += msdos.o
 
 msdos-objs := namei.o msdosfs_syms.o

fs/nls/Makefile

@@ -2,8 +2,6 @@
 # Makefile for native language support
 #
 
-export-objs := nls_base.o
-
 obj-$(CONFIG_NLS)		+= nls_base.o
 
 obj-$(CONFIG_NLS_CODEPAGE_437)	+= nls_cp437.o

fs/partitions/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-export-objs := msdos.o
-
 obj-y := check.o
 
 obj-$(CONFIG_ACORN_PARTITION) += acorn.o

fs/proc/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux proc filesystem routines.
 #
 
-export-objs := root.o
-
 obj-$(CONFIG_PROC_FS) += proc.o
 
 proc-objs    := inode.o root.o base.o generic.o array.o \

fs/sysfs/Makefile

@@ -2,6 +2,4 @@
 # Makefile for the sysfs virtual filesystem
 #
 
-export-objs	:= inode.o
-
 obj-y		:= inode.o

fs/vfat/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux vfat-filesystem routines.
 #
 
-export-objs := vfatfs_syms.o
-
 obj-$(CONFIG_VFAT_FS) += vfat.o
 
 vfat-objs := namei.o vfatfs_syms.o

fs/xfs/Makefile

@@ -45,9 +45,6 @@ ifeq ($(CONFIG_PAGEBUF_DEBUG),y)
 	EXTRA_CFLAGS += -DPAGEBUF_TRACE
 endif
 
-export-objs			:= pagebuf/page_buf.o support/ktrace.o \
-				   linux/xfs_globals.o
-
 obj-$(CONFIG_XFS_FS)		+= xfs.o
 
 

kernel/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-export-objs = signal.o sys.o kmod.o workqueue.o ksyms.o pm.o exec_domain.o \
-		printk.o suspend.o dma.o module.o cpufreq.o \
-		profile.o rcupdate.o intermodule.o params.o
-
 obj-y     = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
 	    exit.o itimer.o time.o softirq.o resource.o \
 	    sysctl.o capability.o ptrace.o timer.o user.o \

lib/Makefile

@@ -8,9 +8,6 @@
 
 L_TARGET := lib.a
 
-export-objs := cmdline.o dec_and_lock.o rwsem-spinlock.o rwsem.o \
-	       crc32.o rbtree.o radix-tree.o kobject.o
-
 obj-y := errno.o ctype.o string.o vsprintf.o brlock.o cmdline.o \
 	 bust_spinlocks.o rbtree.o radix-tree.o dump_stack.o \
 	 kobject.o

lib/zlib_deflate/Makefile

@@ -6,8 +6,6 @@
 # decompression code.
 #
 
-export-objs := deflate_syms.o
-
 obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate.o
 
 zlib_deflate-objs := deflate.o deftree.o deflate_syms.o

lib/zlib_inflate/Makefile

@@ -13,8 +13,6 @@
 # uncompression can be done without blocking on allocation).
 #
 
-export-objs := inflate_syms.o
-
 obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate.o
 
 zlib_inflate-objs := infblock.o infcodes.o inffast.o inflate.o \

mm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux memory manager.
 #
 
-export-objs := shmem.o filemap.o mempool.o page_alloc.o page-writeback.o
-
 mmu-y			:= nommu.o
 mmu-$(CONFIG_MMU)	:= fremap.o highmem.o madvise.o memory.o mincore.o \
 			   mlock.o mmap.o mprotect.o mremap.o msync.o rmap.o \

net/802/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux 802.x protocol layers.
 #
 
-export-objs		:= p8022.o psnap.o
-
 obj-y			:= p8023.o
 
 # Check the p8022 selections against net/core/Makefile.

net/Makefile

@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-export-objs :=	netsyms.o
-
 obj-y	:= socket.o core/
 
 # LLC has to be linked before the files in net/802/

net/appletalk/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux AppleTalk layer.
 #
 
-export-objs = ddp.o
-
 obj-$(CONFIG_ATALK) += appletalk.o
 
 appletalk-y			:= aarp.o ddp.o atalk_proc.o

net/atm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the ATM Protocol Families.
 #
 
-export-objs 	:= common.o atm_misc.o raw.o resources.o ipcommon.o proc.o
-
 mpoa-objs	:= mpc.o mpoa_caches.o mpoa_proc.o
 
 obj-$(CONFIG_ATM) := addr.o pvc.o signaling.o svc.o common.o atm_misc.o raw.o resources.o

net/ax25/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux AX.25 layer.
 #
 
-export-objs := af_ax25.o
-
 obj-$(CONFIG_AX25) += ax25.o
 
 ax25-y	 := ax25_addr.o ax25_dev.o ax25_iface.o ax25_in.o ax25_ip.o ax25_out.o \

net/bluetooth/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux Bluetooth subsystem.
 #
 
-export-objs := syms.o
-
 obj-$(CONFIG_BT)	+= bluetooth.o
 obj-$(CONFIG_BT_L2CAP)	+= l2cap.o
 obj-$(CONFIG_BT_SCO)	+= sco.o

net/bridge/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the IEEE 802.1d ethernet bridging layer.
 #
 
-export-objs := br.o
-
 obj-$(CONFIG_BRIDGE) += bridge.o
 
 bridge-objs	:= br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o \

net/bridge/netfilter/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the netfilter modules for Link Layer filtering on a bridge.
 #
 
-export-objs := ebtables.o
-
 obj-$(CONFIG_BRIDGE_NF_EBTABLES) += ebtables.o
 obj-$(CONFIG_BRIDGE_EBT_T_FILTER) += ebtable_filter.o
 obj-$(CONFIG_BRIDGE_EBT_T_NAT) += ebtable_nat.o

net/ipv4/netfilter/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the netfilter modules on top of IPv4.
 #
 
-export-objs  := ip_conntrack_standalone.o ip_nat_standalone.o \
-		ip_tables.o arp_tables.o
-
 # objects for the conntrack and NAT core (used by standalone and backw. compat)
 ip_nf_conntrack-objs	:= ip_conntrack_core.o ip_conntrack_proto_generic.o ip_conntrack_proto_tcp.o ip_conntrack_proto_udp.o ip_conntrack_proto_icmp.o
 ip_nf_nat-objs		:= ip_nat_core.o ip_nat_helper.o ip_nat_proto_unknown.o ip_nat_proto_tcp.o ip_nat_proto_udp.o ip_nat_proto_icmp.o
@@ -25,11 +22,9 @@ obj-$(CONFIG_IP_NF_CONNTRACK) += ip_conntrack.o
 # connection tracking helpers
 obj-$(CONFIG_IP_NF_FTP) += ip_conntrack_ftp.o
 ifdef CONFIG_IP_NF_NAT_FTP
-	export-objs += ip_conntrack_ftp.o
 endif
 obj-$(CONFIG_IP_NF_IRC) += ip_conntrack_irc.o
 ifdef CONFIG_IP_NF_NAT_IRC
-	export-objs += ip_conntrack_irc.o
 endif
 
 # NAT helpers 

net/ipv6/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux TCP/IP (INET6) layer.
 #
 
-export-objs :=  ipv6_syms.o
-
 obj-$(CONFIG_IPV6) += ipv6.o
 
 ipv6-objs :=	af_inet6.o ip6_output.o ip6_input.o addrconf.o sit.o \

net/ipv6/netfilter/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the netfilter modules on top of IPv6.
 #
 
-export-objs := ip6_tables.o
-
 # Link order matters here.
 obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
 obj-$(CONFIG_IP6_NF_MATCH_LIMIT) += ip6t_limit.o

net/irda/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux IrDA protocol layer.
 #
 
-export-objs := irsyms.o
-
 obj-$(CONFIG_IRDA) += irda.o
 obj-$(CONFIG_IRLAN) += irlan/
 obj-$(CONFIG_IRNET) += irnet/

net/irda/ircomm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux IrDA IrCOMM protocol layer.
 #
 
-export-objs := ircomm_core.o
-
 obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o
 
 ircomm-objs := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o

net/lapb/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux LAPB layer.
 #
 
-export-objs := lapb_iface.o
-
 obj-$(CONFIG_LAPB) += lapb.o
 
 lapb-objs := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o

net/llc/Makefile

@@ -18,6 +18,3 @@ llc-y := llc_if.o llc_c_ev.o llc_c_ac.o llc_mac.o llc_sap.o llc_s_st.o \
 	 llc_main.o llc_s_ac.o llc_conn.o llc_c_st.o llc_stat.o llc_actn.o \
 	 llc_s_ev.o llc_evnt.o llc_pdu.o llc_proc.o
 llc-$(CONFIG_LLC_UI)	+= af_llc.o
-
-# Objects that export symbols.
-export-objs := llc_if.o

net/rxrpc/Makefile

@@ -2,8 +2,6 @@
 # Makefile for Linux kernel Rx RPC
 #
 
-export-objs := rxrpc_syms.o
-
 rxrpc-objs := \
 	call.o \
 	connection.o \

net/sunrpc/Makefile

@@ -6,8 +6,6 @@ obj-$(CONFIG_SUNRPC_GSS) += auth_gss/
 
 obj-$(CONFIG_SUNRPC) += sunrpc.o
 
-export-objs := sunrpc_syms.o
-
 sunrpc-y := clnt.o xprt.o sched.o \
 	    auth.o auth_null.o auth_unix.o \
 	    svc.o svcsock.o svcauth.o svcauth_unix.o \

net/sunrpc/auth_gss/Makefile

@@ -4,8 +4,6 @@
 
 obj-$(CONFIG_SUNRPC_GSS) += auth_rpcgss.o
 
-export-objs := sunrpcgss_syms.o
-
 auth_rpcgss-objs := auth_gss.o gss_pseudoflavors.o gss_generic_token.o \
 	sunrpcgss_syms.o gss_mech_switch.o
 

net/wanrouter/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux WAN router layer.
 #
 
-export-objs := wanmain.o
-
 obj-$(CONFIG_WAN_ROUTER) += wanrouter.o
 
 wanrouter-objs :=  wanproc.o wanmain.o

security/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the kernel security code
 #
 
-# Objects that export symbols
-export-objs	:= security.o capability.o
-
 # if we don't select a security model, use the default capabilities
 ifneq ($(CONFIG_SECURITY),y)
 obj-y		+= capability.o

sound/Makefile

 # Makefile for the Linux sound card driver
 #
 
-export-objs     := sound_core.o
-
 obj-$(CONFIG_SOUND) += soundcore.o
 obj-$(CONFIG_SOUND_PRIME) += oss/
 obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/

sound/core/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999,2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := sound.o pcm.o pcm_lib.o rawmidi.o timer.o hwdep.o
-
 snd-objs     := sound.o init.o memory.o info.o control.o misc.o \
                 device.o wrappers.o
 ifeq ($(CONFIG_ISA),y)
@@ -18,7 +16,6 @@ snd-pcm-objs := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \
 		pcm_memory.o
 ifeq ($(CONFIG_PCI),y)
 snd-pcm-objs += pcm_sgbuf.o
-export-objs  += pcm_sgbuf.o
 endif
 
 snd-rawmidi-objs  := rawmidi.o

sound/core/oss/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := mixer_oss.o
-
 snd-mixer-oss-objs := mixer_oss.o
 
 snd-pcm-oss-objs := pcm_oss.o pcm_plugin.o \

sound/core/seq/Makefile

@@ -8,9 +8,6 @@ ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
   obj-$(CONFIG_SND_SEQUENCER) += oss/
 endif
 
-export-objs  := seq_device.o seq.o seq_instr.o seq_midi_emul.o \
-		seq_midi_event.o seq_virmidi.o
-
 snd-seq-device-objs := seq_device.o
 snd-seq-objs := seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o \
                 seq_fifo.o seq_prioq.o seq_timer.o \

sound/core/seq/instr/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := ainstr_fm.o ainstr_simple.o ainstr_gf1.o ainstr_iw.o
-
 snd-ainstr-fm-objs := ainstr_fm.o
 snd-ainstr-simple-objs := ainstr_simple.o
 snd-ainstr-gf1-objs := ainstr_gf1.o

sound/drivers/mpu401/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := mpu401_uart.o
-
 snd-mpu401-objs := mpu401.o
 snd-mpu401-uart-objs := mpu401_uart.o
 

sound/drivers/opl3/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := opl3_lib.o
-
 snd-opl3-lib-objs := opl3_lib.o opl3_synth.o
 ifeq ($(subst m,y,$(CONFIG_SND_SEQUENCER)),y)
 snd-opl3-synth-objs := opl3_seq.o opl3_midi.o opl3_drums.o

sound/i2c/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := i2c.o cs8427.o tea6330t.o
-
 snd-i2c-objs := i2c.o
 snd-cs8427-objs := cs8427.o
 snd-tea6330t-objs := tea6330t.o

sound/i2c/l3/Makefile

@@ -2,8 +2,6 @@
 # Makefile for ALSA
 #
 
-export-objs += uda1341.o
-
 snd-uda1341-objs := uda1341.o
 
 # Module Dependency

sound/isa/ad1816a/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := ad1816a_lib.o
-
 snd-ad1816a-lib-objs := ad1816a_lib.o
 snd-ad1816a-objs := ad1816a.o
 

sound/isa/ad1848/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := ad1848_lib.o
-
 snd-ad1848-lib-objs := ad1848_lib.o
 snd-ad1848-objs := ad1848.o
 

sound/isa/cs423x/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := cs4231_lib.o cs4236_lib.o
-
 snd-cs4231-lib-objs := cs4231_lib.o
 snd-cs4236-lib-objs := cs4236_lib.o
 snd-cs4231-objs := cs4231.o

sound/isa/es1688/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := es1688_lib.o
-
 snd-es1688-lib-objs := es1688_lib.o
 snd-es1688-objs := es1688.o
 

sound/isa/gus/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := gus_main.o gus_volume.o
-
 snd-gus-lib-objs := gus_main.o \
 		    gus_io.o gus_irq.o gus_timer.o \
 		    gus_mem.o gus_mem_proc.o gus_dram.o gus_dma.o gus_volume.o \

sound/isa/sb/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := emu8000.o sb_common.o sb8_main.o sb16_main.o sb16_csp.o
-
 snd-sb-common-objs := sb_common.o sb_mixer.o
 snd-sb8-dsp-objs := sb8_main.o sb8_midi.o
 snd-sb16-dsp-objs := sb16_main.o

sound/oss/Makefile

@@ -3,13 +3,6 @@
 # 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
 # Rewritten to use lists instead of if-statements.
 
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs	:=  ad1848.o audio_syms.o midi_syms.o mpu401.o ac97_codec.o \
-		    msnd.o opl3.o sb_common.o sequencer_syms.o ac97.o aci.o \
-		    sound_syms.o uart401.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_SOUND_OSS)		+= sound.o

sound/oss/dmasound/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the DMA sound driver
 #
 
-export-objs := dmasound_core.o
-
 obj-$(CONFIG_DMASOUND_ATARI)  += dmasound_core.o dmasound_atari.o
 obj-$(CONFIG_DMASOUND_AWACS)  += dmasound_core.o dmasound_awacs.o
 obj-$(CONFIG_DMASOUND_PAULA)  += dmasound_core.o dmasound_paula.o

sound/pci/ac97/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := ac97_codec.o ak4531_codec.o
-
 snd-ac97-codec-objs := ac97_codec.o ac97_patch.o
 snd-ak4531-codec-objs := ak4531_codec.o
 

sound/pci/emu10k1/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := emu10k1_main.o
-
 snd-emu10k1-objs := emu10k1.o emu10k1_main.o \
 		    irq.o memory.o voice.o emumpu401.o emupcm.o io.o \
 		    emuproc.o emumixer.o emufx.o

sound/pci/ice1712/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := ice1712.o
-
 snd-ice1712-objs := ice1712.o ak4524.o delta.o hoontech.o ews.o amp.o
 
 # Toplevel Module Dependency

sound/pci/rme9652/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := hammerfall_mem.o
-
 snd-hammerfall-mem-objs := hammerfall_mem.o
 snd-rme9652-objs := rme9652.o
 snd-hdsp-objs := hdsp.o

sound/pci/trident/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := trident_main.o
-
 snd-trident-objs := trident.o trident_main.o trident_memory.o
 snd-trident-synth-objs := trident_synth.o
 

sound/synth/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := util_mem.o
-
 snd-util-mem-objs := util_mem.o
 
 # Toplevel Module Dependency

sound/synth/emux/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := emux.o
-
 snd-emux-synth-objs := emux.o emux_synth.o emux_seq.o emux_nrpn.o \
 		       emux_effect.o emux_proc.o soundfont.o \
 		       $(if $(CONFIG_SND_SEQUENCER_OSS),emux_oss.o)