staging: fbtft: Use standard MIPI DCS command defines for ili9341

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/fbtft/fb_ili9341.c

@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -39,9 +40,9 @@ static int init_display(struct fbtft_par *par)
 	par->fbtftops.reset(par);
 
 	/* startup sequence for MI0283QT-9A */
-	write_reg(par, 0x01); /* software reset */
+	write_reg(par, MIPI_DCS_SOFT_RESET);
 	mdelay(5);
-	write_reg(par, 0x28); /* display off */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_OFF);
 	/* --------------------------------------------------------- */
 	write_reg(par, 0xCF, 0x00, 0x83, 0x30);
 	write_reg(par, 0xED, 0x64, 0x03, 0x12, 0x81);
@@ -56,18 +57,18 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0xC5, 0x35, 0x3E);
 	write_reg(par, 0xC7, 0xBE);
 	/* ------------memory access control------------------------ */
-	write_reg(par, 0x3A, 0x55); /* 16bit pixel */
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); /* 16bit pixel */
 	/* ------------frame rate----------------------------------- */
 	write_reg(par, 0xB1, 0x00, 0x1B);
 	/* ------------Gamma---------------------------------------- */
 	/* write_reg(par, 0xF2, 0x08); */ /* Gamma Function Disable */
-	write_reg(par, 0x26, 0x01);
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 	/* ------------display-------------------------------------- */
 	write_reg(par, 0xB7, 0x07); /* entry mode set */
 	write_reg(par, 0xB6, 0x0A, 0x82, 0x27, 0x00);
-	write_reg(par, 0x11); /* sleep out */
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 	mdelay(100);
-	write_reg(par, 0x29); /* display on */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	mdelay(20);
 
 	return 0;
@@ -75,40 +76,39 @@ static int init_display(struct fbtft_par *par)
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address set */
-	write_reg(par, 0x2A,
-		(xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
 
-	/* Row address set */
-	write_reg(par, 0x2B,
-		(ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
-#define MEM_Y   (7) /* MY row address order */
-#define MEM_X   (6) /* MX column address order */
-#define MEM_V   (5) /* MV row / column exchange */
-#define MEM_L   (4) /* ML vertical refresh order */
-#define MEM_H   (2) /* MH horizontal refresh order */
+#define MEM_Y   BIT(7) /* MY row address order */
+#define MEM_X   BIT(6) /* MX column address order */
+#define MEM_V   BIT(5) /* MV row / column exchange */
+#define MEM_L   BIT(4) /* ML vertical refresh order */
+#define MEM_H   BIT(2) /* MH horizontal refresh order */
 #define MEM_BGR (3) /* RGB-BGR Order */
 static int set_var(struct fbtft_par *par)
 {
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, (1 << MEM_X) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_X | (par->bgr << MEM_BGR));
 		break;
 	case 270:
-		write_reg(par, 0x36,
-			(1 << MEM_V) | (1 << MEM_L) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_V | MEM_L | (par->bgr << MEM_BGR));
 		break;
 	case 180:
-		write_reg(par, 0x36, (1 << MEM_Y) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_Y | (par->bgr << MEM_BGR));
 		break;
 	case 90:
-		write_reg(par, 0x36, (1 << MEM_Y) | (1 << MEM_X) |
-				     (1 << MEM_V) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_Y | MEM_X | MEM_V | (par->bgr << MEM_BGR));
 		break;
 	}