Commit 48e0c114 authored by Tero Kristo's avatar Tero Kristo

ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility

PRM device instance offset is now provided through the prm_init_data.
This gets rid of some cpu_is_X / soc_is_X calls from PRM core code,
preparing for PRM to be its own separate driver.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
parent ab7b2ffc
...@@ -524,6 +524,7 @@ struct omap_prcm_irq_setup { ...@@ -524,6 +524,7 @@ struct omap_prcm_irq_setup {
* @mem: IO mem pointer for this module * @mem: IO mem pointer for this module
* @offset: module base address offset from the IO base * @offset: module base address offset from the IO base
* @flags: PRCM module init flags * @flags: PRCM module init flags
* @device_inst_offset: device instance offset within the module address space
* @init: low level PRCM init function for this module * @init: low level PRCM init function for this module
* @np: device node for this PRCM module * @np: device node for this PRCM module
*/ */
...@@ -532,6 +533,7 @@ struct omap_prcm_init_data { ...@@ -532,6 +533,7 @@ struct omap_prcm_init_data {
void __iomem *mem; void __iomem *mem;
s16 offset; s16 offset;
u16 flags; u16 flags;
s32 device_inst_offset;
int (*init)(const struct omap_prcm_init_data *data); int (*init)(const struct omap_prcm_init_data *data);
struct device_node *np; struct device_node *np;
}; };
......
...@@ -713,6 +713,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data) ...@@ -713,6 +713,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
if (!soc_is_dra7xx()) if (!soc_is_dra7xx())
prm_features |= PRM_HAS_VOLTAGE; prm_features |= PRM_HAS_VOLTAGE;
omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
return prm_register(&omap44xx_prm_ll_data); return prm_register(&omap44xx_prm_ll_data);
} }
......
...@@ -34,6 +34,9 @@ ...@@ -34,6 +34,9 @@
#include "prm3xxx.h" #include "prm3xxx.h"
#include "prm33xx.h" #include "prm33xx.h"
#include "prm44xx.h" #include "prm44xx.h"
#include "prm54xx.h"
#include "prm7xx.h"
#include "prcm43xx.h"
#include "common.h" #include "common.h"
#include "clock.h" #include "clock.h"
#include "cm.h" #include "cm.h"
...@@ -661,11 +664,35 @@ static struct omap_prcm_init_data am3_prm_data __initdata = { ...@@ -661,11 +664,35 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
}; };
#endif #endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ #ifdef CONFIG_ARCH_OMAP4
defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
static struct omap_prcm_init_data omap4_prm_data __initdata = { static struct omap_prcm_init_data omap4_prm_data __initdata = {
.index = TI_CLKM_PRM, .index = TI_CLKM_PRM,
.init = omap44xx_prm_init, .init = omap44xx_prm_init,
.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
};
#endif
#ifdef CONFIG_SOC_OMAP5
static struct omap_prcm_init_data omap5_prm_data __initdata = {
.index = TI_CLKM_PRM,
.init = omap44xx_prm_init,
.device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
};
#endif
#ifdef CONFIG_SOC_DRA7XX
static struct omap_prcm_init_data dra7_prm_data __initdata = {
.index = TI_CLKM_PRM,
.init = omap44xx_prm_init,
.device_inst_offset = DRA7XX_PRM_DEVICE_INST,
};
#endif
#ifdef CONFIG_SOC_AM43XX
static struct omap_prcm_init_data am4_prm_data __initdata = {
.index = TI_CLKM_PRM,
.init = omap44xx_prm_init,
.device_inst_offset = AM43XX_PRM_DEVICE_INST,
}; };
#endif #endif
...@@ -680,7 +707,7 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { ...@@ -680,7 +707,7 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
{ .compatible = "ti,am3-prcm", .data = &am3_prm_data }, { .compatible = "ti,am3-prcm", .data = &am3_prm_data },
#endif #endif
#ifdef CONFIG_SOC_AM43XX #ifdef CONFIG_SOC_AM43XX
{ .compatible = "ti,am4-prcm", .data = &omap4_prm_data }, { .compatible = "ti,am4-prcm", .data = &am4_prm_data },
#endif #endif
#ifdef CONFIG_SOC_TI81XX #ifdef CONFIG_SOC_TI81XX
{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data }, { .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
...@@ -697,11 +724,11 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { ...@@ -697,11 +724,11 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
{ .compatible = "ti,omap4-scrm", .data = &scrm_data }, { .compatible = "ti,omap4-scrm", .data = &scrm_data },
#endif #endif
#ifdef CONFIG_SOC_OMAP5 #ifdef CONFIG_SOC_OMAP5
{ .compatible = "ti,omap5-prm", .data = &omap4_prm_data }, { .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
{ .compatible = "ti,omap5-scrm", .data = &scrm_data }, { .compatible = "ti,omap5-scrm", .data = &scrm_data },
#endif #endif
#ifdef CONFIG_SOC_DRA7XX #ifdef CONFIG_SOC_DRA7XX
{ .compatible = "ti,dra7-prm", .data = &omap4_prm_data }, { .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
#endif #endif
{ } { }
}; };
......
...@@ -47,20 +47,12 @@ void omap_prm_base_init(void) ...@@ -47,20 +47,12 @@ void omap_prm_base_init(void)
s32 omap4_prmst_get_prm_dev_inst(void) s32 omap4_prmst_get_prm_dev_inst(void)
{ {
if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
return prm_dev_inst; return prm_dev_inst;
}
/* This cannot be done way early at boot.. as things are not setup */ void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
if (cpu_is_omap44xx()) {
prm_dev_inst = OMAP4430_PRM_DEVICE_INST; prm_dev_inst = dev_inst;
else if (soc_is_omap54xx())
prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
else if (soc_is_dra7xx())
prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
else if (soc_is_am43xx())
prm_dev_inst = AM43XX_PRM_DEVICE_INST;
return prm_dev_inst;
} }
/* Read a register in a PRM instance */ /* Read a register in a PRM instance */
......
...@@ -14,6 +14,7 @@ ...@@ -14,6 +14,7 @@
#define PRM_INSTANCE_UNKNOWN -1 #define PRM_INSTANCE_UNKNOWN -1
extern s32 omap4_prmst_get_prm_dev_inst(void); extern s32 omap4_prmst_get_prm_dev_inst(void);
void omap4_prminst_set_prm_dev_inst(s32 dev_inst);
/* /*
* In an ideal world, we would not export these low-level functions, * In an ideal world, we would not export these low-level functions,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment