Commit 4a81e5dd authored by Jian Hu's avatar Jian Hu Committed by Kevin Hilman

ARM64: dts: meson-axg: add PWM DT info for Meson-Axg SoC

Add PWM DT info for the Amlogic's Meson-Axg SoC.
Signed-off-by: default avatarJian Hu <jian.hu@amlogic.com>
Signed-off-by: default avatarYixun Lan <yixun.lan@amlogic.com>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent de05ded6
...@@ -120,6 +120,20 @@ cbus: bus@ffd00000 { ...@@ -120,6 +120,20 @@ cbus: bus@ffd00000 {
#size-cells = <2>; #size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
pwm_ab: pwm@1b000 {
compatible = "amlogic,meson-axg-ee-pwm";
reg = <0x0 0x1b000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@1a000 {
compatible = "amlogic,meson-axg-ee-pwm";
reg = <0x0 0x1a000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
uart_A: serial@24000 { uart_A: serial@24000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x24000 0x0 0x14>; reg = <0x0 0x24000 0x0 0x14>;
...@@ -194,6 +208,90 @@ gpio: bank@480 { ...@@ -194,6 +208,90 @@ gpio: bank@480 {
#gpio-cells = <2>; #gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 0 86>; gpio-ranges = <&pinctrl_periphs 0 0 86>;
}; };
pwm_a_a_pins: pwm_a_a {
mux {
groups = "pwm_a_a";
function = "pwm_a";
};
};
pwm_a_x18_pins: pwm_a_x18 {
mux {
groups = "pwm_a_x18";
function = "pwm_a";
};
};
pwm_a_x20_pins: pwm_a_x20 {
mux {
groups = "pwm_a_x20";
function = "pwm_a";
};
};
pwm_a_z_pins: pwm_a_z {
mux {
groups = "pwm_a_z";
function = "pwm_a";
};
};
pwm_b_a_pins: pwm_b_a {
mux {
groups = "pwm_b_a";
function = "pwm_b";
};
};
pwm_b_x_pins: pwm_b_x {
mux {
groups = "pwm_b_x";
function = "pwm_b";
};
};
pwm_b_z_pins: pwm_b_z {
mux {
groups = "pwm_b_z";
function = "pwm_b";
};
};
pwm_c_a_pins: pwm_c_a {
mux {
groups = "pwm_c_a";
function = "pwm_c";
};
};
pwm_c_x10_pins: pwm_c_x10 {
mux {
groups = "pwm_c_x10";
function = "pwm_c";
};
};
pwm_c_x17_pins: pwm_c_x17 {
mux {
groups = "pwm_c_x17";
function = "pwm_c";
};
};
pwm_d_x11_pins: pwm_d_x11 {
mux {
groups = "pwm_d_x11";
function = "pwm_d";
};
};
pwm_d_x16_pins: pwm_d_x16 {
mux {
groups = "pwm_d_x16";
function = "pwm_d";
};
};
}; };
}; };
...@@ -239,6 +337,20 @@ gpio_ao: bank@14 { ...@@ -239,6 +337,20 @@ gpio_ao: bank@14 {
}; };
}; };
pwm_AO_ab: pwm@7000 {
compatible = "amlogic,meson-axg-ao-pwm";
reg = <0x0 0x07000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_AO_cd: pwm@2000 {
compatible = "amlogic,axg-ao-pwm";
reg = <0x0 0x02000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
uart_AO: serial@3000 { uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>; reg = <0x0 0x3000 0x0 0x18>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment