ARM: dts: aspeed: Fix pca954x i2c-mux node names

"make dtbs_check":

    arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected)
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts

@@ -424,7 +424,7 @@ &i2c2 {
 
 &i2c3 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -471,7 +471,7 @@ &i2c5 {
 
 &i2c6 {
 	status = "okay";
-	i2c-switch@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9548";
 		reg = <0x72>;
 		#address-cells = <1>;
@@ -524,7 +524,7 @@ channel_6_7: i2c@7 {
 		};
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -533,7 +533,7 @@ channel_6_8: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -569,7 +569,7 @@ channel_6_9: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -605,7 +605,7 @@ channel_6_10: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -640,7 +640,7 @@ channel_6_11: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -808,7 +808,7 @@ &i2c9 {
 
 &i2c10 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -838,7 +838,7 @@ channel_10_3: i2c@3 {
 		};
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts

@@ -132,7 +132,7 @@ &i2c1 {
 	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
 	 * Main Board).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -194,7 +194,7 @@ &i2c2 {
 	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
 	 * Controller Module).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -256,7 +256,7 @@ &i2c3 {
 	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
 	 * Main Board).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -423,7 +423,7 @@ &i2c8 {
 	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
 	 * Delivery Board).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -486,7 +486,7 @@ &i2c15 {
 	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
 	 * Controller Module).
 	 */
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts

@@ -328,7 +328,7 @@ &i2c0 {
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -341,7 +341,7 @@ imux16: i2c@0 {
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -390,7 +390,7 @@ imux111: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -446,7 +446,7 @@ imux17: i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -495,7 +495,7 @@ imux127: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -551,7 +551,7 @@ imux18: i2c@2 {
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -600,7 +600,7 @@ imux47: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -656,7 +656,7 @@ imux19: i2c@3 {
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -705,7 +705,7 @@ imux63: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -761,7 +761,7 @@ imux20: i2c@4 {
 			#size-cells = <0>;
 			reg = <4>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -810,7 +810,7 @@ imux79: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -866,7 +866,7 @@ imux21: i2c@5 {
 			#size-cells = <0>;
 			reg = <5>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -915,7 +915,7 @@ imux95: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -971,7 +971,7 @@ imux22: i2c@6 {
 			#size-cells = <0>;
 			reg = <6>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1020,7 +1020,7 @@ imux143: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1076,7 +1076,7 @@ imux23: i2c@7 {
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1125,7 +1125,7 @@ imux159: i2c@7 {
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1183,7 +1183,7 @@ imux167: i2c@7 {
 &i2c2 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1281,7 +1281,7 @@ &i2c7 {
 &i2c8 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1294,7 +1294,7 @@ imux32: i2c@0 {
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1350,7 +1350,7 @@ imux33: i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1406,7 +1406,7 @@ imux34: i2c@2 {
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1462,7 +1462,7 @@ imux35: i2c@3 {
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts

@@ -65,7 +65,7 @@ &kcs3 {
 };
 
 &i2c2 {
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -123,7 +123,7 @@ imux23: i2c@7 {
 };
 
 &i2c5 {
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts

@@ -233,7 +233,7 @@ &i2c2 {
 	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
 	 * Controller Module).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -303,7 +303,7 @@ &i2c8 {
 	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
 	 * Main Board).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -315,7 +315,7 @@ imux24: i2c@0 {
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -481,7 +481,7 @@ imux25: i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -544,7 +544,7 @@ imux26: i2c@2 {
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -615,7 +615,7 @@ imux27: i2c@3 {
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -715,7 +715,7 @@ &i2c11 {
 	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
 	 * Main Board).
 	 */
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -727,7 +727,7 @@ imux40: i2c@0 {
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -790,7 +790,7 @@ imux41: i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -853,7 +853,7 @@ imux42: i2c@2 {
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -916,7 +916,7 @@ imux43: i2c@3 {
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -979,7 +979,7 @@ imux44: i2c@4 {
 			#size-cells = <0>;
 			reg = <4>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1042,7 +1042,7 @@ imux45: i2c@5 {
 			#size-cells = <0>;
 			reg = <5>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1105,7 +1105,7 @@ imux46: i2c@6 {
 			#size-cells = <0>;
 			reg = <6>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1168,7 +1168,7 @@ imux47: i2c@7 {
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts

@@ -344,7 +344,7 @@ &i2c2 {
 	 * I2C Switch 2-0070 is connecting to SCM (System Controller
 	 * Module).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -425,7 +425,7 @@ &i2c7 {
 &i2c8 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -441,7 +441,7 @@ imux24: i2c@0 {
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -507,7 +507,7 @@ imux25: i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -573,7 +573,7 @@ imux26: i2c@2 {
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -639,7 +639,7 @@ imux27: i2c@3 {
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -729,7 +729,7 @@ &i2c9 {
 	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
 	 * (Switch Main Board).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -793,7 +793,7 @@ &i2c10 {
 &i2c11 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -809,7 +809,7 @@ imux40: i2c@0 {
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -875,7 +875,7 @@ imux41: i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -941,7 +941,7 @@ imux42: i2c@2 {
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1007,7 +1007,7 @@ imux43: i2c@3 {
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1073,7 +1073,7 @@ imux44: i2c@4 {
 			#size-cells = <0>;
 			reg = <4>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1139,7 +1139,7 @@ imux45: i2c@5 {
 			#size-cells = <0>;
 			reg = <5>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1205,7 +1205,7 @@ imux46: i2c@6 {
 			#size-cells = <0>;
 			reg = <6>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1271,7 +1271,7 @@ imux47: i2c@7 {
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts

@@ -211,7 +211,7 @@ &i2c0 {
 &i2c1 {
 	status = "okay";
 	//X24 Riser
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -243,7 +243,7 @@ eeprom@50 {
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -303,7 +303,7 @@ eeprom@50 {
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -363,7 +363,7 @@ eeprom@50 {
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts

@@ -44,7 +44,7 @@ flash1@0 {
 };
 
 &i2c7 {
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts

@@ -139,7 +139,7 @@ &i2c1 {
 &i2c2 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -219,7 +219,7 @@ &i2c7 {
 &i2c8 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -288,7 +288,7 @@ &i2c10 {
 &i2c11 {
 	status = "okay";
 
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts

@@ -57,7 +57,7 @@ &i2c1 {
 &i2c2 {
 	status = "okay";
 
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts

@@ -417,7 +417,7 @@ pca2: pca9552@65 {
 			"expander-cable-card5";
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -562,7 +562,7 @@ pca3: pca9552@66 {
 			"expander-cable-card11";
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -719,7 +719,7 @@ led@1 {
 &i2c6 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -1810,7 +1810,7 @@ eeprom@50 {
 		reg = <0x50>;
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -1947,7 +1947,7 @@ ibm-panel@62 {
 		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -2206,7 +2206,7 @@ pca0: pca9552@61 {
 		};
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -2259,7 +2259,7 @@ eeprom@50 {
 &i2c15 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -2311,7 +2311,7 @@ eeprom@53 {
 		};
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -2363,7 +2363,7 @@ eeprom@53 {
 		};
 	};
 
-	i2c-switch@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9546";
 		reg = <0x72>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts

@@ -341,7 +341,7 @@ tmp275@4a {
 		reg = <0x4a>;
 	};
 
-	pca9546@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -423,7 +423,7 @@ tmp275@49 {
 		reg = <0x49>;
 	};
 
-	pca9546@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -525,7 +525,7 @@ tmp275@4b {
 		reg = <0x4b>;
 	};
 
-	pca9546@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -1355,7 +1355,7 @@ tmp275@49 {
 		reg = <0x49>;
 	};
 
-	pca9546@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts

@@ -348,7 +348,7 @@ tmp112@49 {
 		label = "outlet";
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -432,7 +432,7 @@ &i2c6 {
 &i2c7 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts

@@ -215,7 +215,7 @@ tmp112@49 {
 		label = "outlet";
 	};
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
@@ -224,17 +224,17 @@ pca9548@70 {
 &i2c3 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
 
-	pca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		reg = <0x71>;
 	};
 
-	pca9548@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9548";
 		reg = <0x72>;
 	};
@@ -248,7 +248,7 @@ &i2c4 {
 &i2c5 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
@@ -257,7 +257,7 @@ pca9548@70 {
 &i2c6 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};

arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts

@@ -193,14 +193,14 @@ &i2c10 {
        // I2C EXPANDER
        status = "okay";
 
-       i2c-switch@71 {
+       i2c-mux@71 {
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0x71>;
        };
 
-       i2c-switch@73 {
+       i2c-mux@73 {
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;
@@ -212,7 +212,7 @@ &i2c11 {
        // I2C EXPANDER
        status = "okay";
 
-       i2c-switch@70 {
+       i2c-mux@70 {
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts

@@ -208,7 +208,7 @@ &i2c6 {
 	 *	Slot 3
 	 */
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -249,7 +249,7 @@ &i2c7 {
 	 *	Slot 2,
 	 *	Slot 3
 	 */
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9546";
 		reg = <0x76>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts

@@ -175,7 +175,7 @@ &pinctrl_adc14_default
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -227,7 +227,7 @@ &i2c2 {
 
 &i2c3 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts

@@ -231,7 +231,7 @@ ucd90160@64 {
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -282,7 +282,7 @@ &i2c3 {
 &i2c4 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts

@@ -197,7 +197,7 @@ &i2c2 {
 	 *    Slot 6,
 	 *    Slot 7
 	 */
-	i2c-switch@74 {
+	i2c-mux@74 {
 		compatible = "nxp,pca9546";
 		reg = <0x74>;
 		#address-cells = <1>;
@@ -238,7 +238,7 @@ i2c_pcie7: i2c@3 {
 	 *    SSD 1,
 	 *    SSD 2
 	 */
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -325,7 +325,7 @@ &i2c7 {
 	 *    PSU3
 	 *    PSU2
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts

@@ -285,7 +285,7 @@ U35_PWR_ADC@4b {
 		reg = <0x4b>;
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -321,7 +321,7 @@ SMB_HOST_DB800_C_SCL: i2c@3 {
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@59 {
+	i2c-mux@59 {
 		compatible = "nxp,pca9848";
 		reg = <0x59>;
 		#address-cells = <1>;
@@ -393,7 +393,7 @@ SMB_FB_SCL: i2c@7 {
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9546";
 				reg = <0x77>;
 				#address-cells = <1>;
@@ -490,7 +490,7 @@ &i2c5 {
 &i2c6 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -556,7 +556,7 @@ U197_PCA9546_CH3: i2c@3 {
 &i2c7 {
 	status = "okay";
 
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts

@@ -88,16 +88,16 @@ gpio@27 {
 
 &i2c13 {
 	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@73 {
-		compatible = "nxp,pca9545";
-		reg = <0x73>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 	};
-	mux-sata@71 {
-		compatible = "nxp,pca9543";
-		reg = <0x71>;
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
@@ -106,7 +106,7 @@ mux-sata@71 {
 
 &i2c2 {
 	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		reg = <0x71>;
 		#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts

@@ -133,7 +133,7 @@ gpio@39 {
 
 &i2c13 {
 	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -144,7 +144,7 @@ i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			rsra-mux@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				reg = <0x72>;
 				#address-cells = <1>;
@@ -165,7 +165,7 @@ at24@50 {
 			};
 		};
 	};
-	mux-sata@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -176,7 +176,7 @@ mux-sata@71 {
 
 &i2c2 {
 	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -187,7 +187,7 @@ i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			rsrb-mux@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				reg = <0x72>;
 				#address-cells = <1>;

arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts

@@ -88,16 +88,16 @@ gpio@27 {
 
 &i2c13 {
 	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@73 {
-		compatible = "nxp,pca9545";
-		reg = <0x73>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 	};
-	mux-sata@71 {
-		compatible = "nxp,pca9543";
-		reg = <0x71>;
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
@@ -106,7 +106,7 @@ mux-sata@71 {
 
 &i2c2 {
 	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		reg = <0x71>;
 		#address-cells = <1>;