Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-

queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-11-17

This series contains updates to i40e driver only.

Eryk adds accounting for VLAN header in packet size when VF port VLAN is
configured. He also fixes TC queue distribution when the user has changed
queue counts as well as for configuration of VF ADQ which caused dropped
packets.

Michal adds tracking for when a VSI is being released to prevent null
pointer dereference when managing filters.

Karen ensures PF successfully initiates VF requested reset which could
cause a call trace otherwise.

Jedrzej moves validation of channel queue value earlier to prevent
partial configuration when the value is invalid.

Grzegorz corrects the reported error when adding filter fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -161,6 +161,7 @@ enum i40e_vsi_state_t {
 	__I40E_VSI_OVERFLOW_PROMISC,
 	__I40E_VSI_REINIT_REQUESTED,
 	__I40E_VSI_DOWN_REQUESTED,
+	__I40E_VSI_RELEASING,
 	/* This must be last as it determines the size of the BITMAP */
 	__I40E_VSI_STATE_SIZE__,
 };
@@ -1247,6 +1248,7 @@ void i40e_ptp_restore_hw_time(struct i40e_pf *pf);
 void i40e_ptp_init(struct i40e_pf *pf);
 void i40e_ptp_stop(struct i40e_pf *pf);
 int i40e_ptp_alloc_pins(struct i40e_pf *pf);
+int i40e_update_adq_vsi_queues(struct i40e_vsi *vsi, int vsi_offset);
 int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi);
 i40e_status i40e_get_partition_bw_setting(struct i40e_pf *pf);
 i40e_status i40e_set_partition_bw_setting(struct i40e_pf *pf);

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -1790,6 +1790,7 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 				     bool is_add)
 {
 	struct i40e_pf *pf = vsi->back;
+	u16 num_tc_qps = 0;
 	u16 sections = 0;
 	u8 netdev_tc = 0;
 	u16 numtc = 1;
@@ -1797,13 +1798,33 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 	u8 offset;
 	u16 qmap;
 	int i;
-	u16 num_tc_qps = 0;
 
 	sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
 	offset = 0;
+	/* zero out queue mapping, it will get updated on the end of the function */
+	memset(ctxt->info.queue_mapping, 0, sizeof(ctxt->info.queue_mapping));
+
+	if (vsi->type == I40E_VSI_MAIN) {
+		/* This code helps add more queue to the VSI if we have
+		 * more cores than RSS can support, the higher cores will
+		 * be served by ATR or other filters. Furthermore, the
+		 * non-zero req_queue_pairs says that user requested a new
+		 * queue count via ethtool's set_channels, so use this
+		 * value for queues distribution across traffic classes
+		 */
+		if (vsi->req_queue_pairs > 0)
+			vsi->num_queue_pairs = vsi->req_queue_pairs;
+		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
+			vsi->num_queue_pairs = pf->num_lan_msix;
+	}
 
 	/* Number of queues per enabled TC */
+	if (vsi->type == I40E_VSI_MAIN ||
+	    (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs != 0))
+		num_tc_qps = vsi->num_queue_pairs;
+	else
 		num_tc_qps = vsi->alloc_queue_pairs;
+
 	if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
 		/* Find numtc from enabled TC bitmap */
 		for (i = 0, numtc = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
@@ -1881,15 +1902,11 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 		}
 		ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
 	}
-
-	/* Set actual Tx/Rx queue pairs */
+	/* Do not change previously set num_queue_pairs for PFs and VFs*/
+	if ((vsi->type == I40E_VSI_MAIN && numtc != 1) ||
+	    (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs == 0) ||
+	    (vsi->type != I40E_VSI_MAIN && vsi->type != I40E_VSI_SRIOV))
 		vsi->num_queue_pairs = offset;
-	if ((vsi->type == I40E_VSI_MAIN) && (numtc == 1)) {
-		if (vsi->req_queue_pairs > 0)
-			vsi->num_queue_pairs = vsi->req_queue_pairs;
-		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
-			vsi->num_queue_pairs = pf->num_lan_msix;
-	}
 
 	/* Scheduler section valid can only be set for ADD VSI */
 	if (is_add) {
@@ -2623,7 +2640,8 @@ static void i40e_sync_filters_subtask(struct i40e_pf *pf)
 
 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 		if (pf->vsi[v] &&
-		    (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED)) {
+		    (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED) &&
+		    !test_bit(__I40E_VSI_RELEASING, pf->vsi[v]->state)) {
 			int ret = i40e_sync_vsi_filters(pf->vsi[v]);
 
 			if (ret) {
@@ -5426,6 +5444,58 @@ static void i40e_vsi_update_queue_map(struct i40e_vsi *vsi,
 	       sizeof(vsi->info.tc_mapping));
 }
 
+/**
+ * i40e_update_adq_vsi_queues - update queue mapping for ADq VSI
+ * @vsi: the VSI being reconfigured
+ * @vsi_offset: offset from main VF VSI
+ */
+int i40e_update_adq_vsi_queues(struct i40e_vsi *vsi, int vsi_offset)
+{
+	struct i40e_vsi_context ctxt = {};
+	struct i40e_pf *pf;
+	struct i40e_hw *hw;
+	int ret;
+
+	if (!vsi)
+		return I40E_ERR_PARAM;
+	pf = vsi->back;
+	hw = &pf->hw;
+
+	ctxt.seid = vsi->seid;
+	ctxt.pf_num = hw->pf_id;
+	ctxt.vf_num = vsi->vf_id + hw->func_caps.vf_base_id + vsi_offset;
+	ctxt.uplink_seid = vsi->uplink_seid;
+	ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
+	ctxt.flags = I40E_AQ_VSI_TYPE_VF;
+	ctxt.info = vsi->info;
+
+	i40e_vsi_setup_queue_map(vsi, &ctxt, vsi->tc_config.enabled_tc,
+				 false);
+	if (vsi->reconfig_rss) {
+		vsi->rss_size = min_t(int, pf->alloc_rss_size,
+				      vsi->num_queue_pairs);
+		ret = i40e_vsi_config_rss(vsi);
+		if (ret) {
+			dev_info(&pf->pdev->dev, "Failed to reconfig rss for num_queues\n");
+			return ret;
+		}
+		vsi->reconfig_rss = false;
+	}
+
+	ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
+	if (ret) {
+		dev_info(&pf->pdev->dev, "Update vsi config failed, err %s aq_err %s\n",
+			 i40e_stat_str(hw, ret),
+			 i40e_aq_str(hw, hw->aq.asq_last_status));
+		return ret;
+	}
+	/* update the local VSI info with updated queue map */
+	i40e_vsi_update_queue_map(vsi, &ctxt);
+	vsi->info.valid_sections = 0;
+
+	return ret;
+}
+
 /**
  * i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
  * @vsi: VSI to be configured
@@ -5716,24 +5786,6 @@ static void i40e_remove_queue_channels(struct i40e_vsi *vsi)
 	INIT_LIST_HEAD(&vsi->ch_list);
 }
 
-/**
- * i40e_is_any_channel - channel exist or not
- * @vsi: ptr to VSI to which channels are associated with
- *
- * Returns true or false if channel(s) exist for associated VSI or not
- **/
-static bool i40e_is_any_channel(struct i40e_vsi *vsi)
-{
-	struct i40e_channel *ch, *ch_tmp;
-
-	list_for_each_entry_safe(ch, ch_tmp, &vsi->ch_list, list) {
-		if (ch->initialized)
-			return true;
-	}
-
-	return false;
-}
-
 /**
  * i40e_get_max_queues_for_channel
  * @vsi: ptr to VSI to which channels are associated with
@@ -6240,26 +6292,15 @@ int i40e_create_queue_channel(struct i40e_vsi *vsi,
 	/* By default we are in VEPA mode, if this is the first VF/VMDq
 	 * VSI to be added switch to VEB mode.
 	 */
-	if ((!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) ||
-	    (!i40e_is_any_channel(vsi))) {
-		if (!is_power_of_2(vsi->tc_config.tc_info[0].qcount)) {
-			dev_dbg(&pf->pdev->dev,
-				"Failed to create channel. Override queues (%u) not power of 2\n",
-				vsi->tc_config.tc_info[0].qcount);
-			return -EINVAL;
-		}
 
 	if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
 		pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
 
 		if (vsi->type == I40E_VSI_MAIN) {
 			if (pf->flags & I40E_FLAG_TC_MQPRIO)
-					i40e_do_reset(pf, I40E_PF_RESET_FLAG,
-						      true);
+				i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
 			else
-					i40e_do_reset_safe(pf,
-							   I40E_PF_RESET_FLAG);
-			}
+				i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
 		}
 		/* now onwards for main VSI, number of queues will be value
 		 * of TC0's queue count
@@ -7912,11 +7953,19 @@ static int i40e_setup_tc(struct net_device *netdev, void *type_data)
 			    vsi->seid);
 		need_reset = true;
 		goto exit;
-	} else {
+	} else if (enabled_tc &&
+		   (!is_power_of_2(vsi->tc_config.tc_info[0].qcount))) {
+		netdev_info(netdev,
+			    "Failed to create channel. Override queues (%u) not power of 2\n",
+			    vsi->tc_config.tc_info[0].qcount);
+		ret = -EINVAL;
+		need_reset = true;
+		goto exit;
+	}
+
 	dev_info(&vsi->back->pdev->dev,
 		 "Setup channel (id:%u) utilizing num_queues %d\n",
 		 vsi->seid, vsi->tc_config.tc_info[0].qcount);
-	}
 
 	if (pf->flags & I40E_FLAG_TC_MQPRIO) {
 		if (vsi->mqprio_qopt.max_rate[0]) {
@@ -8482,9 +8531,8 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi,
 		err = i40e_add_del_cloud_filter(vsi, filter, true);
 
 	if (err) {
-		dev_err(&pf->pdev->dev,
-			"Failed to add cloud filter, err %s\n",
-			i40e_stat_str(&pf->hw, err));
+		dev_err(&pf->pdev->dev, "Failed to add cloud filter, err %d\n",
+			err);
 		goto err;
 	}
 
@@ -13771,7 +13819,7 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
 		dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
 		return -ENODEV;
 	}
-
+	set_bit(__I40E_VSI_RELEASING, vsi->state);
 	uplink_seid = vsi->uplink_seid;
 	if (vsi->type != I40E_VSI_SRIOV) {
 		if (vsi->netdev_registered) {

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c

@@ -183,16 +183,17 @@ void i40e_vc_notify_vf_reset(struct i40e_vf *vf)
 /***********************misc routines*****************************/
 
 /**
- * i40e_vc_disable_vf
+ * i40e_vc_reset_vf
  * @vf: pointer to the VF info
- *
- * Disable the VF through a SW reset.
+ * @notify_vf: notify vf about reset or not
+ * Reset VF handler.
  **/
-static inline void i40e_vc_disable_vf(struct i40e_vf *vf)
+static void i40e_vc_reset_vf(struct i40e_vf *vf, bool notify_vf)
 {
 	struct i40e_pf *pf = vf->pf;
 	int i;
 
+	if (notify_vf)
 		i40e_vc_notify_vf_reset(vf);
 
 	/* We want to ensure that an actual reset occurs initiated after this
@@ -211,9 +212,14 @@ static inline void i40e_vc_disable_vf(struct i40e_vf *vf)
 		usleep_range(10000, 20000);
 	}
 
+	if (notify_vf)
 		dev_warn(&vf->pf->pdev->dev,
 			 "Failed to initiate reset for VF %d after 200 milliseconds\n",
 			 vf->vf_id);
+	else
+		dev_dbg(&vf->pf->pdev->dev,
+			"Failed to initiate reset for VF %d after 200 milliseconds\n",
+			vf->vf_id);
 }
 
 /**
@@ -674,14 +680,13 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_id,
 				    u16 vsi_queue_id,
 				    struct virtchnl_rxq_info *info)
 {
+	u16 pf_queue_id = i40e_vc_get_pf_queue_id(vf, vsi_id, vsi_queue_id);
 	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi = pf->vsi[vf->lan_vsi_idx];
 	struct i40e_hw *hw = &pf->hw;
 	struct i40e_hmc_obj_rxq rx_ctx;
-	u16 pf_queue_id;
 	int ret = 0;
 
-	pf_queue_id = i40e_vc_get_pf_queue_id(vf, vsi_id, vsi_queue_id);
-
 	/* clear the context structure first */
 	memset(&rx_ctx, 0, sizeof(struct i40e_hmc_obj_rxq));
 
@@ -719,6 +724,10 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_id,
 	}
 	rx_ctx.rxmax = info->max_pkt_size;
 
+	/* if port VLAN is configured increase the max packet size */
+	if (vsi->info.pvid)
+		rx_ctx.rxmax += VLAN_HLEN;
+
 	/* enable 32bytes desc always */
 	rx_ctx.dsize = 1;
 
@@ -2105,20 +2114,6 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg)
 	return ret;
 }
 
-/**
- * i40e_vc_reset_vf_msg
- * @vf: pointer to the VF info
- *
- * called from the VF to reset itself,
- * unlike other virtchnl messages, PF driver
- * doesn't send the response back to the VF
- **/
-static void i40e_vc_reset_vf_msg(struct i40e_vf *vf)
-{
-	if (test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states))
-		i40e_reset_vf(vf, false);
-}
-
 /**
  * i40e_vc_config_promiscuous_mode_msg
  * @vf: pointer to the VF info
@@ -2217,11 +2212,12 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg)
 	struct virtchnl_vsi_queue_config_info *qci =
 	    (struct virtchnl_vsi_queue_config_info *)msg;
 	struct virtchnl_queue_pair_info *qpi;
-	struct i40e_pf *pf = vf->pf;
 	u16 vsi_id, vsi_queue_id = 0;
-	u16 num_qps_all = 0;
+	struct i40e_pf *pf = vf->pf;
 	i40e_status aq_ret = 0;
 	int i, j = 0, idx = 0;
+	struct i40e_vsi *vsi;
+	u16 num_qps_all = 0;
 
 	if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
 		aq_ret = I40E_ERR_PARAM;
@@ -2310,9 +2306,15 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg)
 		pf->vsi[vf->lan_vsi_idx]->num_queue_pairs =
 			qci->num_queue_pairs;
 	} else {
-		for (i = 0; i < vf->num_tc; i++)
-			pf->vsi[vf->ch[i].vsi_idx]->num_queue_pairs =
-			       vf->ch[i].num_qps;
+		for (i = 0; i < vf->num_tc; i++) {
+			vsi = pf->vsi[vf->ch[i].vsi_idx];
+			vsi->num_queue_pairs = vf->ch[i].num_qps;
+
+			if (i40e_update_adq_vsi_queues(vsi, i)) {
+				aq_ret = I40E_ERR_CONFIG;
+				goto error_param;
+			}
+		}
 	}
 
 error_param:
@@ -2607,8 +2609,7 @@ static int i40e_vc_request_queues_msg(struct i40e_vf *vf, u8 *msg)
 	} else {
 		/* successful request */
 		vf->num_req_queues = req_pairs;
-		i40e_vc_notify_vf_reset(vf);
-		i40e_reset_vf(vf, false);
+		i40e_vc_reset_vf(vf, true);
 		return 0;
 	}
 
@@ -3803,8 +3804,7 @@ static int i40e_vc_add_qch_msg(struct i40e_vf *vf, u8 *msg)
 	vf->num_req_queues = 0;
 
 	/* reset the VF in order to allocate resources */
-	i40e_vc_notify_vf_reset(vf);
-	i40e_reset_vf(vf, false);
+	i40e_vc_reset_vf(vf, true);
 
 	return I40E_SUCCESS;
 
@@ -3844,8 +3844,7 @@ static int i40e_vc_del_qch_msg(struct i40e_vf *vf, u8 *msg)
 	}
 
 	/* reset the VF in order to allocate resources */
-	i40e_vc_notify_vf_reset(vf);
-	i40e_reset_vf(vf, false);
+	i40e_vc_reset_vf(vf, true);
 
 	return I40E_SUCCESS;
 
@@ -3907,7 +3906,7 @@ int i40e_vc_process_vf_msg(struct i40e_pf *pf, s16 vf_id, u32 v_opcode,
 		i40e_vc_notify_vf_link_state(vf);
 		break;
 	case VIRTCHNL_OP_RESET_VF:
-		i40e_vc_reset_vf_msg(vf);
+		i40e_vc_reset_vf(vf, false);
 		ret = 0;
 		break;
 	case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
@@ -4161,7 +4160,7 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 	/* Force the VF interface down so it has to bring up with new MAC
 	 * address
 	 */
-	i40e_vc_disable_vf(vf);
+	i40e_vc_reset_vf(vf, true);
 	dev_info(&pf->pdev->dev, "Bring down and up the VF interface to make this change effective.\n");
 
 error_param:
@@ -4169,34 +4168,6 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 	return ret;
 }
 
-/**
- * i40e_vsi_has_vlans - True if VSI has configured VLANs
- * @vsi: pointer to the vsi
- *
- * Check if a VSI has configured any VLANs. False if we have a port VLAN or if
- * we have no configured VLANs. Do not call while holding the
- * mac_filter_hash_lock.
- */
-static bool i40e_vsi_has_vlans(struct i40e_vsi *vsi)
-{
-	bool have_vlans;
-
-	/* If we have a port VLAN, then the VSI cannot have any VLANs
-	 * configured, as all MAC/VLAN filters will be assigned to the PVID.
-	 */
-	if (vsi->info.pvid)
-		return false;
-
-	/* Since we don't have a PVID, we know that if the device is in VLAN
-	 * mode it must be because of a VLAN filter configured on this VSI.
-	 */
-	spin_lock_bh(&vsi->mac_filter_hash_lock);
-	have_vlans = i40e_is_vsi_in_vlan(vsi);
-	spin_unlock_bh(&vsi->mac_filter_hash_lock);
-
-	return have_vlans;
-}
-
 /**
  * i40e_ndo_set_vf_port_vlan
  * @netdev: network interface device structure
@@ -4253,19 +4224,9 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
 		/* duplicate request, so just return success */
 		goto error_pvid;
 
-	if (i40e_vsi_has_vlans(vsi)) {
-		dev_err(&pf->pdev->dev,
-			"VF %d has already configured VLAN filters and the administrator is requesting a port VLAN override.\nPlease unload and reload the VF driver for this change to take effect.\n",
-			vf_id);
-		/* Administrator Error - knock the VF offline until he does
-		 * the right thing by reconfiguring his network correctly
-		 * and then reloading the VF driver.
-		 */
-		i40e_vc_disable_vf(vf);
-		/* During reset the VF got a new VSI, so refresh the pointer. */
+	i40e_vc_reset_vf(vf, true);
+	/* During reset the VF got a new VSI, so refresh a pointer. */
 	vsi = pf->vsi[vf->lan_vsi_idx];
-	}
-
 	/* Locked once because multiple functions below iterate list */
 	spin_lock_bh(&vsi->mac_filter_hash_lock);
 
@@ -4641,7 +4602,7 @@ int i40e_ndo_set_vf_trust(struct net_device *netdev, int vf_id, bool setting)
 		goto out;
 
 	vf->trusted = setting;
-	i40e_vc_disable_vf(vf);
+	i40e_vc_reset_vf(vf, true);
 	dev_info(&pf->pdev->dev, "VF %u is now %strusted\n",
 		 vf_id, setting ? "" : "un");