rtlwifi: btcoex: 23b 2ant: power on settings for coex

When power on, the wifi could be initiating, force the antenna to
transmit bt packets to avoid bt unstable problems
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c

@@ -3669,6 +3669,37 @@ void ex_btc8723b2ant_init_hwconfig(struct btc_coexist *btcoexist)
 	btcoexist->btc_write_1byte_bitmask(btcoexist, 0x40, 0x20, 0x1);
 }
 
+void ex_btc8723b2ant_power_on_setting(struct btc_coexist *btcoexist)
+{
+	struct btc_board_info *board_info = &btcoexist->board_info;
+	u16 u16tmp = 0x0;
+	u32 value = 0;
+
+	btcoexist->btc_write_1byte(btcoexist, 0x67, 0x20);
+
+	/* enable BB, REG_SYS_FUNC_EN such that we can write 0x948 correctly */
+	u16tmp = btcoexist->btc_read_2byte(btcoexist, 0x2);
+	btcoexist->btc_write_2byte(btcoexist, 0x2, u16tmp | BIT0 | BIT1);
+
+	btcoexist->btc_write_4byte(btcoexist, 0x948, 0x0);
+
+	if (btcoexist->chip_interface == BTC_INTF_USB) {
+		/* fixed at S0 for USB interface */
+		board_info->btdm_ant_pos = BTC_ANTENNA_AT_AUX_PORT;
+	} else {
+		/* for PCIE and SDIO interface, we check efuse 0xc3[6] */
+		if (board_info->single_ant_path == 0) {
+			/* set to S1 */
+			board_info->btdm_ant_pos = BTC_ANTENNA_AT_MAIN_PORT;
+		} else if (board_info->single_ant_path == 1) {
+			/* set to S0 */
+			board_info->btdm_ant_pos = BTC_ANTENNA_AT_AUX_PORT;
+		}
+		btcoexist->btc_set(btcoexist, BTC_SET_ACT_ANTPOSREGRISTRY_CTRL,
+				   &value);
+	}
+}
+
 void ex_btc8723b2ant_init_coex_dm(struct btc_coexist *btcoexist)
 {
 	struct rtl_priv *rtlpriv = btcoexist->adapter;

drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h

@@ -139,6 +139,7 @@ struct btc_board_info {
 	u8 pg_ant_num;	/* pg ant number */
 	u8 btdm_ant_num;	/* ant number for btdm */
 	u8 btdm_ant_pos;
+	u8 single_ant_path; /* current used for 8723b only, 1=>s0,  0=>s1 */
 	bool bt_exist;
 };