Commit 512dc8fe authored by Russell King's avatar Russell King Committed by David S. Miller

dt-bindings: add sff,sff binding for SFP support

Add "sff,sff" for SFF module support with SFP.  These have a different
phys_id value, and also have the present and rate select signals omitted
compared with their socketed counter-parts.
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b4cf6a0a
......@@ -3,7 +3,9 @@ Transceiver
Required properties:
- compatible : must be "sff,sfp"
- compatible : must be one of
"sff,sfp" for SFP modules
"sff,sff" for soldered down SFF modules
Optional Properties:
......@@ -11,7 +13,8 @@ Optional Properties:
interface
- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
module presence input gpio signal, active (module absent) high
module presence input gpio signal, active (module absent) high. Must
not be present for SFF modules
- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
Indication input gpio signal, active (signal lost) high
......@@ -24,10 +27,11 @@ Optional Properties:
- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
Must not be present for SFF modules
- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
high Tx rate
high Tx rate. Must not be present for SFF modules
Example #1: Direct serdes to SFP connection
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment