Merge remote-tracking branch 'regulator/topic/drivers' into regulator-next

Conflicts:
	drivers/regulator/88pm8607.c (simple overlap with a bugfix in v3.4)

Documentation/devicetree/bindings/regulator/fixed-regulator.txt

@@ -8,6 +8,8 @@ Optional properties:
 - startup-delay-us: startup time in microseconds
 - enable-active-high: Polarity of GPIO is Active high
 If this property is missing, the default assumed is Active low.
+- gpio-open-drain: GPIO is open drain type.
+  If this property is missing then default assumption is false.
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
@@ -25,5 +27,6 @@ Example:
 		gpio = <&gpio1 16 0>;
 		startup-delay-us = <70000>;
 		enable-active-high;
-		regulator-boot-on
+		regulator-boot-on;
+		gpio-open-drain;
 	};

Documentation/devicetree/bindings/regulator/tps6586x.txt

+TPS6586x family of regulators
+
+Required properties:
+- compatible: "ti,tps6586x"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO
+- gpio-controller: mark the device as a GPIO controller
+- regulators: list of regulators provided by this controller, must be named
+  after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	pmu: tps6586x@34 {
+		compatible = "ti,tps6586x";
+		reg = <0x34>;
+		interrupts = <0 88 0x4>;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		regulators {
+			sm0_reg: sm0 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm1_reg: sm1 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm2_reg: sm2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <4550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo0_reg: ldo0 {
+				regulator-name = "PCIE CLK";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2475000>;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};

drivers/mfd/tps6586x.c

@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
+#include <linux/regulator/of_regulator.h>
 
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6586x.h>
@@ -460,6 +461,7 @@ static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
 
 		pdev->dev.parent = tps6586x->dev;
 		pdev->dev.platform_data = subdev->platform_data;
+		pdev->dev.of_node = subdev->of_node;
 
 		ret = platform_device_add(pdev);
 		if (ret) {
@@ -474,6 +476,86 @@ static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
 	return ret;
 }
 
+#ifdef CONFIG_OF
+static struct of_regulator_match tps6586x_matches[] = {
+	{ .name = "sm0",     .driver_data = (void *)TPS6586X_ID_SM_0    },
+	{ .name = "sm1",     .driver_data = (void *)TPS6586X_ID_SM_1    },
+	{ .name = "sm2",     .driver_data = (void *)TPS6586X_ID_SM_2    },
+	{ .name = "ldo0",    .driver_data = (void *)TPS6586X_ID_LDO_0   },
+	{ .name = "ldo1",    .driver_data = (void *)TPS6586X_ID_LDO_1   },
+	{ .name = "ldo2",    .driver_data = (void *)TPS6586X_ID_LDO_2   },
+	{ .name = "ldo3",    .driver_data = (void *)TPS6586X_ID_LDO_3   },
+	{ .name = "ldo4",    .driver_data = (void *)TPS6586X_ID_LDO_4   },
+	{ .name = "ldo5",    .driver_data = (void *)TPS6586X_ID_LDO_5   },
+	{ .name = "ldo6",    .driver_data = (void *)TPS6586X_ID_LDO_6   },
+	{ .name = "ldo7",    .driver_data = (void *)TPS6586X_ID_LDO_7   },
+	{ .name = "ldo8",    .driver_data = (void *)TPS6586X_ID_LDO_8   },
+	{ .name = "ldo9",    .driver_data = (void *)TPS6586X_ID_LDO_9   },
+	{ .name = "ldo_rtc", .driver_data = (void *)TPS6586X_ID_LDO_RTC },
+};
+
+static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *client)
+{
+	const unsigned int num = ARRAY_SIZE(tps6586x_matches);
+	struct device_node *np = client->dev.of_node;
+	struct tps6586x_platform_data *pdata;
+	struct tps6586x_subdev_info *devs;
+	struct device_node *regs;
+	unsigned int count;
+	unsigned int i, j;
+	int err;
+
+	regs = of_find_node_by_name(np, "regulators");
+	if (!regs)
+		return NULL;
+
+	err = of_regulator_match(&client->dev, regs, tps6586x_matches, num);
+	if (err < 0) {
+		of_node_put(regs);
+		return NULL;
+	}
+
+	of_node_put(regs);
+	count = err;
+
+	devs = devm_kzalloc(&client->dev, count * sizeof(*devs), GFP_KERNEL);
+	if (!devs)
+		return NULL;
+
+	for (i = 0, j = 0; i < num && j < count; i++) {
+		if (!tps6586x_matches[i].init_data)
+			continue;
+
+		devs[j].name = "tps6586x-regulator";
+		devs[j].platform_data = tps6586x_matches[i].init_data;
+		devs[j].id = (int)tps6586x_matches[i].driver_data;
+		devs[j].of_node = tps6586x_matches[i].of_node;
+		j++;
+	}
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->num_subdevs = count;
+	pdata->subdevs = devs;
+	pdata->gpio_base = -1;
+	pdata->irq_base = -1;
+
+	return pdata;
+}
+
+static struct of_device_id tps6586x_of_match[] = {
+	{ .compatible = "ti,tps6586x", },
+	{ },
+};
+#else
+static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *client)
+{
+	return NULL;
+}
+#endif
+
 static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
@@ -481,6 +563,9 @@ static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
 	struct tps6586x *tps6586x;
 	int ret;
 
+	if (!pdata && client->dev.of_node)
+		pdata = tps6586x_parse_dt(client);
+
 	if (!pdata) {
 		dev_err(&client->dev, "tps6586x requires platform data\n");
 		return -ENOTSUPP;
@@ -573,6 +658,7 @@ static struct i2c_driver tps6586x_driver = {
 	.driver	= {
 		.name	= "tps6586x",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(tps6586x_of_match),
 	},
 	.probe		= tps6586x_i2c_probe,
 	.remove		= __devexit_p(tps6586x_i2c_remove),

drivers/mfd/twl-core.c

@@ -224,13 +224,6 @@
 #define HIGH_PERF_SQ			(1 << 3)
 #define CK32K_LOWPWR_EN			(1 << 7)
 
-
-/* chip-specific feature flags, for i2c_device_id.driver_data */
-#define TWL4030_VAUX2		BIT(0)	/* pre-5030 voltage ranges */
-#define TPS_SUBSET		BIT(1)	/* tps659[23]0 have fewer LDOs */
-#define TWL5031			BIT(2)  /* twl5031 has different registers */
-#define TWL6030_CLASS		BIT(3)	/* TWL6030 class */
-
 /*----------------------------------------------------------------------*/
 
 /* is driver active, bound to a chip? */

drivers/regulator/aat2870-regulator.c

@@ -24,7 +24,6 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>

drivers/regulator/ab3100.c

@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/mfd/abx500.h>

drivers/regulator/da9052-regulator.c

@@ -20,6 +20,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #ifdef CONFIG_OF
+#include <linux/of.h>
 #include <linux/regulator/of_regulator.h>
 #endif
 
@@ -393,7 +394,7 @@ static int __devinit da9052_regulator_probe(struct platform_device *pdev)
 		if (!nproot)
 			return -ENODEV;
 
-		for (np = of_get_next_child(nproot, NULL); !np;
+		for (np = of_get_next_child(nproot, NULL); np;
 		     np = of_get_next_child(nproot, np)) {
 			if (!of_node_cmp(np->name,
 					 regulator->info->reg_desc.name)) {

drivers/regulator/fixed.c

@@ -25,7 +25,6 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/fixed.h>
 #include <linux/gpio.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
@@ -91,6 +90,9 @@ of_get_fixed_voltage_config(struct device *dev)
 	if (of_find_property(np, "enable-active-high", NULL))
 		config->enable_high = true;
 
+	if (of_find_property(np, "gpio-open-drain", NULL))
+		config->gpio_is_open_drain = true;
+
 	return config;
 }
 

drivers/regulator/gpio-regulator.c

@@ -30,7 +30,6 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/gpio.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 
 struct gpio_regulator_data {

drivers/regulator/isl6271a-regulator.c

@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/i2c.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 
 #define	ISL6271A_VOLTAGE_MIN	850000

drivers/regulator/max8660.c

@@ -370,7 +370,7 @@ static int __devinit max8660_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	max8660 = kzalloc(sizeof(struct max8660) +
+	max8660 = devm_kzalloc(&client->dev, sizeof(struct max8660) +
 			sizeof(struct regulator_dev *) * MAX8660_V_END,
 			GFP_KERNEL);
 	if (!max8660)

drivers/regulator/max8952.c

@@ -69,11 +69,6 @@ static int max8952_write_reg(struct max8952_data *max8952,
 	return i2c_smbus_write_byte_data(max8952->client, reg, value);
 }
 
-static int max8952_voltage(struct max8952_data *max8952, u8 mode)
-{
-	return (max8952->pdata->dvs_mode[mode] * 10 + 770) * 1000;
-}
-
 static int max8952_list_voltage(struct regulator_dev *rdev,
 		unsigned int selector)
 {
@@ -82,7 +77,7 @@ static int max8952_list_voltage(struct regulator_dev *rdev,
 	if (rdev_get_id(rdev) != 0)
 		return -EINVAL;
 
-	return max8952_voltage(max8952, selector);
+	return (max8952->pdata->dvs_mode[selector] * 10 + 770) * 1000;
 }
 
 static int max8952_is_enabled(struct regulator_dev *rdev)
@@ -117,7 +112,7 @@ static int max8952_disable(struct regulator_dev *rdev)
 	return 0;
 }
 
-static int max8952_get_voltage(struct regulator_dev *rdev)
+static int max8952_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct max8952_data *max8952 = rdev_get_drvdata(rdev);
 	u8 vid = 0;
@@ -127,7 +122,7 @@ static int max8952_get_voltage(struct regulator_dev *rdev)
 	if (max8952->vid1)
 		vid += 2;
 
-	return max8952_voltage(max8952, vid);
+	return vid;
 }
 
 static int max8952_set_voltage_sel(struct regulator_dev *rdev,
@@ -154,7 +149,7 @@ static struct regulator_ops max8952_ops = {
 	.is_enabled		= max8952_is_enabled,
 	.enable			= max8952_enable,
 	.disable		= max8952_disable,
-	.get_voltage		= max8952_get_voltage,
+	.get_voltage_sel	= max8952_get_voltage_sel,
 	.set_voltage_sel	= max8952_set_voltage_sel,
 	.set_suspend_disable	= max8952_disable,
 };

drivers/regulator/max8997.c

@@ -22,7 +22,6 @@
  */
 
 #include <linux/bug.h>
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
@@ -278,9 +277,7 @@ static int max8997_reg_is_enabled(struct regulator_dev *rdev)
 	u8 val;
 
 	ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
-	if (ret == -EINVAL)
-		return 1; /* "not controllable" */
-	else if (ret)
+	if (ret)
 		return ret;
 
 	ret = max8997_read_reg(i2c, reg, &val);
@@ -382,7 +379,7 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev,
 	return 0;
 }
 
-static int max8997_get_voltage(struct regulator_dev *rdev)
+static int max8997_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
@@ -400,15 +397,7 @@ static int max8997_get_voltage(struct regulator_dev *rdev)
 	val >>= shift;
 	val &= mask;
 
-	if (rdev->desc && rdev->desc->ops && rdev->desc->ops->list_voltage)
-		return rdev->desc->ops->list_voltage(rdev, val);
-
-	/*
-	 * max8997_list_voltage returns value for any rdev with voltage_map,
-	 * which works for "CHARGER" and "CHARGER TOPOFF" that do not have
-	 * list_voltage ops (they are current regulators).
-	 */
-	return max8997_list_voltage(rdev, val);
+	return val;
 }
 
 static inline int max8997_get_voltage_proper_val(
@@ -497,9 +486,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
 	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
 	int rid = rdev_get_id(rdev);
-	int reg, shift = 0, mask, ret;
-	int i;
-	u8 org;
+	int i, reg, shift, mask, ret;
 
 	switch (rid) {
 	case MAX8997_LDO1 ... MAX8997_LDO21:
@@ -528,21 +515,50 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
 	if (ret)
 		return ret;
 
-	max8997_read_reg(i2c, reg, &org);
-	org = (org & mask) >> shift;
-
 	ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
 	*selector = i;
 
-	if (rid == MAX8997_BUCK1 || rid == MAX8997_BUCK2 ||
-			rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) {
-		/* If the voltage is increasing */
-		if (org < i)
-			udelay(DIV_ROUND_UP(desc->step * (i - org),
-						max8997->ramp_delay));
+	return ret;
+}
+
+static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
+						unsigned int old_selector,
+						unsigned int new_selector)
+{
+	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
+	int rid = rdev_get_id(rdev);
+	const struct voltage_map_desc *desc = reg_voltage_map[rid];
+
+	/* Delay is required only if the voltage is increasing */
+	if (old_selector >= new_selector)
+		return 0;
+
+	/* No need to delay if gpio_dvs_mode */
+	switch (rid) {
+	case MAX8997_BUCK1:
+		if (max8997->buck1_gpiodvs)
+			return 0;
+		break;
+	case MAX8997_BUCK2:
+		if (max8997->buck2_gpiodvs)
+			return 0;
+		break;
+	case MAX8997_BUCK5:
+		if (max8997->buck5_gpiodvs)
+			return 0;
+		break;
 	}
 
-	return ret;
+	switch (rid) {
+	case MAX8997_BUCK1:
+	case MAX8997_BUCK2:
+	case MAX8997_BUCK4:
+	case MAX8997_BUCK5:
+		return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
+				    max8997->ramp_delay);
+	}
+
+	return 0;
 }
 
 /*
@@ -749,11 +765,6 @@ static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
 	return ret;
 }
 
-static int max8997_reg_enable_suspend(struct regulator_dev *rdev)
-{
-	return 0;
-}
-
 static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
@@ -786,9 +797,9 @@ static struct regulator_ops max8997_ldo_ops = {
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
 	.disable		= max8997_reg_disable,
-	.get_voltage		= max8997_get_voltage,
+	.get_voltage_sel	= max8997_get_voltage_sel,
 	.set_voltage		= max8997_set_voltage_ldobuck,
-	.set_suspend_enable	= max8997_reg_enable_suspend,
+	.set_voltage_time_sel	= max8997_set_voltage_ldobuck_time_sel,
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
@@ -797,9 +808,9 @@ static struct regulator_ops max8997_buck_ops = {
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
 	.disable		= max8997_reg_disable,
-	.get_voltage		= max8997_get_voltage,
+	.get_voltage_sel	= max8997_get_voltage_sel,
 	.set_voltage		= max8997_set_voltage_buck,
-	.set_suspend_enable	= max8997_reg_enable_suspend,
+	.set_voltage_time_sel	= max8997_set_voltage_ldobuck_time_sel,
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
@@ -808,7 +819,6 @@ static struct regulator_ops max8997_fixedvolt_ops = {
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
 	.disable		= max8997_reg_disable,
-	.set_suspend_enable	= max8997_reg_enable_suspend,
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
@@ -817,39 +827,56 @@ static struct regulator_ops max8997_safeout_ops = {
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
 	.disable		= max8997_reg_disable,
-	.get_voltage		= max8997_get_voltage,
+	.get_voltage_sel	= max8997_get_voltage_sel,
 	.set_voltage		= max8997_set_voltage_safeout,
-	.set_suspend_enable	= max8997_reg_enable_suspend,
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
 static struct regulator_ops max8997_fixedstate_ops = {
 	.list_voltage		= max8997_list_voltage_charger_cv,
-	.get_voltage		= max8997_get_voltage,
+	.get_voltage_sel	= max8997_get_voltage_sel,
 	.set_voltage		= max8997_set_voltage_charger_cv,
 };
 
-static int max8997_set_voltage_ldobuck_wrap(struct regulator_dev *rdev,
-		int min_uV, int max_uV)
+static int max8997_set_current_limit(struct regulator_dev *rdev,
+				     int min_uA, int max_uA)
 {
 	unsigned dummy;
+	int rid = rdev_get_id(rdev);
+
+	if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
+		return -EINVAL;
 
-	return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV, &dummy);
+	/* Reuse max8997_set_voltage_ldobuck to set current_limit. */
+	return max8997_set_voltage_ldobuck(rdev, min_uA, max_uA, &dummy);
 }
 
+static int max8997_get_current_limit(struct regulator_dev *rdev)
+{
+	int sel, rid = rdev_get_id(rdev);
+
+	if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
+		return -EINVAL;
+
+	sel = max8997_get_voltage_sel(rdev);
+	if (sel < 0)
+		return sel;
+
+	/* Reuse max8997_list_voltage to get current_limit. */
+	return max8997_list_voltage(rdev, sel);
+}
 
 static struct regulator_ops max8997_charger_ops = {
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
 	.disable		= max8997_reg_disable,
-	.get_current_limit	= max8997_get_voltage,
-	.set_current_limit	= max8997_set_voltage_ldobuck_wrap,
+	.get_current_limit	= max8997_get_current_limit,
+	.set_current_limit	= max8997_set_current_limit,
 };
 
 static struct regulator_ops max8997_charger_fixedstate_ops = {
-	.is_enabled		= max8997_reg_is_enabled,
-	.get_current_limit	= max8997_get_voltage,
-	.set_current_limit	= max8997_set_voltage_ldobuck_wrap,
+	.get_current_limit	= max8997_get_current_limit,
+	.set_current_limit	= max8997_set_current_limit,
 };
 
 #define MAX8997_VOLTAGE_REGULATOR(_name, _ops) {\
@@ -922,16 +949,15 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	max8997 = kzalloc(sizeof(struct max8997_data), GFP_KERNEL);
+	max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
+			       GFP_KERNEL);
 	if (!max8997)
 		return -ENOMEM;
 
 	size = sizeof(struct regulator_dev *) * pdata->num_regulators;
-	max8997->rdev = kzalloc(size, GFP_KERNEL);
-	if (!max8997->rdev) {
-		kfree(max8997);
+	max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!max8997->rdev)
 		return -ENOMEM;
-	}
 
 	rdev = max8997->rdev;
 	max8997->dev = &pdev->dev;
@@ -955,7 +981,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 					pdata->buck1_voltage[i] / 1000 +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
-			goto err_alloc;
+			goto err_out;
 
 		max8997->buck2_vol[i] = ret =
 			max8997_get_voltage_proper_val(
@@ -964,7 +990,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 					pdata->buck2_voltage[i] / 1000 +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
-			goto err_alloc;
+			goto err_out;
 
 		max8997->buck5_vol[i] = ret =
 			max8997_get_voltage_proper_val(
@@ -973,7 +999,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 					pdata->buck5_voltage[i] / 1000 +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
-			goto err_alloc;
+			goto err_out;
 
 		if (max_buck1 < max8997->buck1_vol[i])
 			max_buck1 = max8997->buck1_vol[i];
@@ -1006,7 +1032,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 				!gpio_is_valid(pdata->buck125_gpios[2])) {
 			dev_err(&pdev->dev, "GPIO NOT VALID\n");
 			ret = -EINVAL;
-			goto err_alloc;
+			goto err_out;
 		}
 
 		ret = gpio_request(pdata->buck125_gpios[0],
@@ -1015,7 +1041,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 			dev_warn(&pdev->dev, "Duplicated gpio request"
 					" on SET1\n");
 		else if (ret)
-			goto err_alloc;
+			goto err_out;
 		else
 			gpio1set = true;
 
@@ -1027,7 +1053,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 		else if (ret) {
 			if (gpio1set)
 				gpio_free(pdata->buck125_gpios[0]);
-			goto err_alloc;
+			goto err_out;
 		} else
 			gpio2set = true;
 
@@ -1041,7 +1067,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 				gpio_free(pdata->buck125_gpios[0]);
 			if (gpio2set)
 				gpio_free(pdata->buck125_gpios[1]);
-			goto err_alloc;
+			goto err_out;
 		}
 
 		gpio_direction_output(pdata->buck125_gpios[0],
@@ -1110,13 +1136,9 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 
 	return 0;
 err:
-	for (i = 0; i < max8997->num_regulators; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
-err_alloc:
-	kfree(max8997->rdev);
-	kfree(max8997);
-
+	while (--i >= 0)
+		regulator_unregister(rdev[i]);
+err_out:
 	return ret;
 }
 
@@ -1127,12 +1149,7 @@ static int __devexit max8997_pmic_remove(struct platform_device *pdev)
 	int i;
 
 	for (i = 0; i < max8997->num_regulators; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
-
-	kfree(max8997->rdev);
-	kfree(max8997);
-
+		regulator_unregister(rdev[i]);
 	return 0;
 }
 

drivers/regulator/max8998.c

@@ -28,7 +28,6 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
-#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/mfd/max8998.h>
@@ -719,16 +718,15 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL);
+	max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_data),
+			       GFP_KERNEL);
 	if (!max8998)
 		return -ENOMEM;
 
 	size = sizeof(struct regulator_dev *) * pdata->num_regulators;
-	max8998->rdev = kzalloc(size, GFP_KERNEL);
-	if (!max8998->rdev) {
-		kfree(max8998);
+	max8998->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!max8998->rdev)
 		return -ENOMEM;
-	}
 
 	rdev = max8998->rdev;
 	max8998->dev = &pdev->dev;
@@ -752,14 +750,14 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 			printk(KERN_ERR "MAX8998 SET1 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set1);
 			ret = -EIO;
-			goto err_free_mem;
+			goto err_out;
 		}
 		/* Check if SET2 is not equal to 0 */
 		if (!pdata->buck1_set2) {
 			printk(KERN_ERR "MAX8998 SET2 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set2);
 			ret = -EIO;
-			goto err_free_mem;
+			goto err_out;
 		}
 
 		gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
@@ -779,7 +777,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
 		if (ret)
-			goto err_free_mem;
+			goto err_out;
 
 		/* Set predefined value for BUCK1 register 2 */
 		i = 0;
@@ -791,7 +789,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[1] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
 		if (ret)
-			goto err_free_mem;
+			goto err_out;
 
 		/* Set predefined value for BUCK1 register 3 */
 		i = 0;
@@ -803,7 +801,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[2] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
 		if (ret)
-			goto err_free_mem;
+			goto err_out;
 
 		/* Set predefined value for BUCK1 register 4 */
 		i = 0;
@@ -815,7 +813,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[3] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
 		if (ret)
-			goto err_free_mem;
+			goto err_out;
 
 	}
 
@@ -825,7 +823,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 			printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck2_set3);
 			ret = -EIO;
-			goto err_free_mem;
+			goto err_out;
 		}
 		gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
 		gpio_direction_output(pdata->buck2_set3,
@@ -840,7 +838,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck2_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
 		if (ret)
-			goto err_free_mem;
+			goto err_out;
 
 		/* BUCK2 register 2 */
 		i = 0;
@@ -851,7 +849,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck2_vol[1] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
 		if (ret)
-			goto err_free_mem;
+			goto err_out;
 	}
 
 	for (i = 0; i < pdata->num_regulators; i++) {
@@ -881,14 +879,9 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 
 	return 0;
 err:
-	for (i = 0; i < max8998->num_regulators; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
-
-err_free_mem:
-	kfree(max8998->rdev);
-	kfree(max8998);
-
+	while (--i >= 0)
+		regulator_unregister(rdev[i]);
+err_out:
 	return ret;
 }
 
@@ -899,12 +892,7 @@ static int __devexit max8998_pmic_remove(struct platform_device *pdev)
 	int i;
 
 	for (i = 0; i < max8998->num_regulators; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
-
-	kfree(max8998->rdev);
-	kfree(max8998);
-
+		regulator_unregister(rdev[i]);
 	return 0;
 }
 

drivers/regulator/of_regulator.c

@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 
 static void of_get_regulation_constraints(struct device_node *np,
 					struct regulator_init_data **init_data)
@@ -85,3 +86,49 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
 	return init_data;
 }
 EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
+
+/**
+ * of_regulator_match - extract regulator init data
+ * @dev: device requesting the data
+ * @node: parent device node of the regulators
+ * @matches: match table for the regulators
+ * @num_matches: number of entries in match table
+ *
+ * This function uses a match table specified by the regulator driver and
+ * looks up the corresponding init data in the device tree. Note that the
+ * match table is modified in place.
+ *
+ * Returns the number of matches found or a negative error code on failure.
+ */
+int of_regulator_match(struct device *dev, struct device_node *node,
+		       struct of_regulator_match *matches,
+		       unsigned int num_matches)
+{
+	unsigned int count = 0;
+	unsigned int i;
+
+	if (!dev || !node)
+		return -EINVAL;
+
+	for (i = 0; i < num_matches; i++) {
+		struct of_regulator_match *match = &matches[i];
+		struct device_node *child;
+
+		child = of_find_node_by_name(node, match->name);
+		if (!child)
+			continue;
+
+		match->init_data = of_get_regulator_init_data(dev, child);
+		if (!match->init_data) {
+			dev_err(dev, "failed to parse DT for regulator %s\n",
+				child->name);
+			return -EINVAL;
+		}
+
+		match->of_node = child;
+		count++;
+	}
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(of_regulator_match);

drivers/regulator/rc5t583-regulator.c

@@ -23,7 +23,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/err.h>

drivers/regulator/s5m8767.c

@@ -12,7 +12,6 @@
  */
 
 #include <linux/bug.h>
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
@@ -347,7 +346,10 @@ static int s5m8767_convert_voltage_to_sel(
 	if (max_vol < desc->min || min_vol > desc->max)
 		return -EINVAL;
 
-	selector = (min_vol - desc->min) / desc->step;
+	if (min_vol < desc->min)
+		min_vol = desc->min;
+
+	selector = DIV_ROUND_UP(min_vol - desc->min, desc->step);
 
 	if (desc->min + desc->step * selector > max_vol)
 		return -EINVAL;

drivers/regulator/tps62360-regulator.c

@@ -32,7 +32,6 @@
 #include <linux/regulator/tps62360.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
 
@@ -48,10 +47,10 @@
 
 enum chips {TPS62360, TPS62361, TPS62362, TPS62363};
 
-#define TPS62360_BASE_VOLTAGE	770
+#define TPS62360_BASE_VOLTAGE	770000
 #define TPS62360_N_VOLTAGES	64
 
-#define TPS62361_BASE_VOLTAGE	500
+#define TPS62361_BASE_VOLTAGE	500000
 #define TPS62361_N_VOLTAGES	128
 
 /* tps 62360 chip information */
@@ -72,6 +71,7 @@ struct tps62360_chip {
 	int lru_index[4];
 	int curr_vset_vsel[4];
 	int curr_vset_id;
+	int change_uv_per_us;
 };
 
 /*
@@ -97,6 +97,7 @@ static bool find_voltage_set_register(struct tps62360_chip *tps,
 	bool found = false;
 	int new_vset_reg = tps->lru_index[3];
 	int found_index = 3;
+
 	for (i = 0; i < 4; ++i) {
 		if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) {
 			new_vset_reg = tps->lru_index[i];
@@ -115,7 +116,7 @@ static bool find_voltage_set_register(struct tps62360_chip *tps,
 	return found;
 }
 
-static int tps62360_dcdc_get_voltage(struct regulator_dev *dev)
+static int tps62360_dcdc_get_voltage_sel(struct regulator_dev *dev)
 {
 	struct tps62360_chip *tps = rdev_get_drvdata(dev);
 	int vsel;
@@ -124,12 +125,12 @@ static int tps62360_dcdc_get_voltage(struct regulator_dev *dev)
 
 	ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data);
 	if (ret < 0) {
-		dev_err(tps->dev, "%s: Error in reading register %d\n",
-			__func__, REG_VSET0 + tps->curr_vset_id);
+		dev_err(tps->dev, "%s(): register %d read failed with err %d\n",
+			__func__, REG_VSET0 + tps->curr_vset_id, ret);
 		return ret;
 	}
 	vsel = (int)data & tps->voltage_reg_mask;
-	return (tps->voltage_base + vsel * 10) * 1000;
+	return vsel;
 }
 
 static int tps62360_dcdc_set_voltage(struct regulator_dev *dev,
@@ -141,17 +142,13 @@ static int tps62360_dcdc_set_voltage(struct regulator_dev *dev,
 	bool found = false;
 	int new_vset_id = tps->curr_vset_id;
 
-	if (max_uV < min_uV)
-		return -EINVAL;
-
-	if (min_uV >
-		((tps->voltage_base + (tps->desc.n_voltages - 1) * 10) * 1000))
+	if ((max_uV < min_uV) || (max_uV < tps->voltage_base))
 		return -EINVAL;
 
-	if (max_uV < tps->voltage_base * 1000)
+	if (min_uV > (tps->voltage_base + (tps->desc.n_voltages - 1) * 10000))
 		return -EINVAL;
 
-	vsel = DIV_ROUND_UP(min_uV - (tps->voltage_base * 1000), 10000);
+	vsel = DIV_ROUND_UP(min_uV - tps->voltage_base, 10000);
 	if (selector)
 		*selector = (vsel & tps->voltage_reg_mask);
 
@@ -166,8 +163,9 @@ static int tps62360_dcdc_set_voltage(struct regulator_dev *dev,
 		ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id,
 				tps->voltage_reg_mask, vsel);
 		if (ret < 0) {
-			dev_err(tps->dev, "%s: Error in updating register %d\n",
-				 __func__, REG_VSET0 + new_vset_id);
+			dev_err(tps->dev,
+				"%s(): register %d update failed with err %d\n",
+				 __func__, REG_VSET0 + new_vset_id, ret);
 			return ret;
 		}
 		tps->curr_vset_id = new_vset_id;
@@ -176,8 +174,7 @@ static int tps62360_dcdc_set_voltage(struct regulator_dev *dev,
 
 	/* Select proper VSET register vio gpios */
 	if (tps->valid_gpios) {
-		gpio_set_value_cansleep(tps->vsel0_gpio,
-					new_vset_id & 0x1);
+		gpio_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1);
 		gpio_set_value_cansleep(tps->vsel1_gpio,
 					(new_vset_id >> 1) & 0x1);
 	}
@@ -191,57 +188,72 @@ static int tps62360_dcdc_list_voltage(struct regulator_dev *dev,
 
 	if (selector >= tps->desc.n_voltages)
 		return -EINVAL;
-	return (tps->voltage_base + selector * 10) * 1000;
+
+	return tps->voltage_base + selector * 10000;
+}
+
+static int tps62360_set_voltage_time_sel(struct regulator_dev *rdev,
+		unsigned int old_selector, unsigned int new_selector)
+{
+	struct tps62360_chip *tps = rdev_get_drvdata(rdev);
+	int old_uV, new_uV;
+
+	old_uV = tps62360_dcdc_list_voltage(rdev, old_selector);
+	if (old_uV < 0)
+		return old_uV;
+
+	new_uV = tps62360_dcdc_list_voltage(rdev, new_selector);
+	if (new_uV < 0)
+		return new_uV;
+
+	return DIV_ROUND_UP(abs(old_uV - new_uV), tps->change_uv_per_us);
 }
 
 static struct regulator_ops tps62360_dcdc_ops = {
-	.get_voltage = tps62360_dcdc_get_voltage,
-	.set_voltage = tps62360_dcdc_set_voltage,
-	.list_voltage = tps62360_dcdc_list_voltage,
+	.get_voltage_sel	= tps62360_dcdc_get_voltage_sel,
+	.set_voltage		= tps62360_dcdc_set_voltage,
+	.list_voltage		= tps62360_dcdc_list_voltage,
+	.set_voltage_time_sel	= tps62360_set_voltage_time_sel,
 };
 
-static int tps62360_init_force_pwm(struct tps62360_chip *tps,
+static int __devinit tps62360_init_force_pwm(struct tps62360_chip *tps,
 	struct tps62360_regulator_platform_data *pdata,
 	int vset_id)
 {
-	unsigned int data;
 	int ret;
-	ret = regmap_read(tps->regmap, REG_VSET0 + vset_id, &data);
-	if (ret < 0) {
-		dev_err(tps->dev, "%s() fails in writing reg %d\n",
-			__func__, REG_VSET0 + vset_id);
-		return ret;
-	}
-	tps->curr_vset_vsel[vset_id] = data & tps->voltage_reg_mask;
+	int bit = 0;
+
 	if (pdata->en_force_pwm)
-		data |= BIT(7);
-	else
-		data &= ~BIT(7);
-	ret = regmap_write(tps->regmap, REG_VSET0 + vset_id, data);
+		bit = BIT(7);
+
+	ret = regmap_update_bits(tps->regmap, REG_VSET0 + vset_id, BIT(7), bit);
 	if (ret < 0)
-		dev_err(tps->dev, "%s() fails in writing reg %d\n",
-				__func__, REG_VSET0 + vset_id);
+		dev_err(tps->dev,
+			"%s(): register %d update failed with err %d\n",
+			__func__, REG_VSET0 + vset_id, ret);
 	return ret;
 }
 
-static int tps62360_init_dcdc(struct tps62360_chip *tps,
+static int __devinit tps62360_init_dcdc(struct tps62360_chip *tps,
 		struct tps62360_regulator_platform_data *pdata)
 {
 	int ret;
 	int i;
+	unsigned int ramp_ctrl;
 
-	/* Initailize internal pull up/down control */
+	/* Initialize internal pull up/down control */
 	if (tps->en_internal_pulldn)
 		ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0);
 	else
 		ret = regmap_write(tps->regmap, REG_CONTROL, 0x0);
 	if (ret < 0) {
-		dev_err(tps->dev, "%s() fails in writing reg %d\n",
-			__func__, REG_CONTROL);
+		dev_err(tps->dev,
+			"%s(): register %d write failed with err %d\n",
+			__func__, REG_CONTROL, ret);
 		return ret;
 	}
 
-	/* Initailize force PWM mode */
+	/* Initialize force PWM mode */
 	if (tps->valid_gpios) {
 		for (i = 0; i < 4; ++i) {
 			ret = tps62360_init_force_pwm(tps, pdata, i);
@@ -256,15 +268,33 @@ static int tps62360_init_dcdc(struct tps62360_chip *tps,
 
 	/* Reset output discharge path to reduce power consumption */
 	ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0);
-	if (ret < 0)
-		dev_err(tps->dev, "%s() fails in updating reg %d\n",
-			__func__, REG_RAMPCTRL);
+	if (ret < 0) {
+		dev_err(tps->dev,
+			"%s(): register %d update failed with err %d\n",
+			__func__, REG_RAMPCTRL, ret);
+		return ret;
+	}
+
+	/* Get ramp value from ramp control register */
+	ret = regmap_read(tps->regmap, REG_RAMPCTRL, &ramp_ctrl);
+	if (ret < 0) {
+		dev_err(tps->dev,
+			"%s(): register %d read failed with err %d\n",
+			__func__, REG_RAMPCTRL, ret);
+		return ret;
+	}
+	ramp_ctrl = (ramp_ctrl >> 4) & 0x7;
+
+	/* ramp mV/us = 32/(2^ramp_ctrl) */
+	tps->change_uv_per_us = DIV_ROUND_UP(32000, BIT(ramp_ctrl));
 	return ret;
 }
 
 static const struct regmap_config tps62360_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.max_register		= REG_CHIPID,
+	.cache_type		= REGCACHE_RBTREE,
 };
 
 static int __devinit tps62360_probe(struct i2c_client *client,
@@ -279,14 +309,14 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 
 	pdata = client->dev.platform_data;
 	if (!pdata) {
-		dev_err(&client->dev, "%s() Err: Platform data not found\n",
+		dev_err(&client->dev, "%s(): Platform data not found\n",
 						__func__);
 		return -EIO;
 	}
 
 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps) {
-		dev_err(&client->dev, "%s() Err: Memory allocation fails\n",
+		dev_err(&client->dev, "%s(): Memory allocation failed\n",
 						__func__);
 		return -ENOMEM;
 	}
@@ -323,8 +353,9 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 	tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
 	if (IS_ERR(tps->regmap)) {
 		ret = PTR_ERR(tps->regmap);
-		dev_err(&client->dev, "%s() Err: Failed to allocate register"
-			"map: %d\n", __func__, ret);
+		dev_err(&client->dev,
+			"%s(): regmap allocation failed with err %d\n",
+			__func__, ret);
 		return ret;
 	}
 	i2c_set_clientdata(client, tps);
@@ -335,35 +366,26 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 	tps->valid_gpios = false;
 
 	if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) {
-		ret = gpio_request(tps->vsel0_gpio, "tps62360-vsel0");
+		int gpio_flags;
+		gpio_flags = (pdata->vsel0_def_state) ?
+				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+		ret = gpio_request_one(tps->vsel0_gpio,
+				gpio_flags, "tps62360-vsel0");
 		if (ret) {
 			dev_err(&client->dev,
-				"Err: Could not obtain vsel0 GPIO %d: %d\n",
-						tps->vsel0_gpio, ret);
-			goto err_gpio0;
-		}
-		ret = gpio_direction_output(tps->vsel0_gpio,
-					pdata->vsel0_def_state);
-		if (ret) {
-			dev_err(&client->dev, "Err: Could not set direction of"
-				"vsel0 GPIO %d: %d\n", tps->vsel0_gpio, ret);
-			gpio_free(tps->vsel0_gpio);
+				"%s(): Could not obtain vsel0 GPIO %d: %d\n",
+				__func__, tps->vsel0_gpio, ret);
 			goto err_gpio0;
 		}
 
-		ret = gpio_request(tps->vsel1_gpio, "tps62360-vsel1");
+		gpio_flags = (pdata->vsel1_def_state) ?
+				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+		ret = gpio_request_one(tps->vsel1_gpio,
+				gpio_flags, "tps62360-vsel1");
 		if (ret) {
 			dev_err(&client->dev,
-				"Err: Could not obtain vsel1 GPIO %d: %d\n",
-						tps->vsel1_gpio, ret);
-			goto err_gpio1;
-		}
-		ret = gpio_direction_output(tps->vsel1_gpio,
-					pdata->vsel1_def_state);
-		if (ret) {
-			dev_err(&client->dev, "Err: Could not set direction of"
-				"vsel1 GPIO %d: %d\n", tps->vsel1_gpio, ret);
-			gpio_free(tps->vsel1_gpio);
+				"%s(): Could not obtain vsel1 GPIO %d: %d\n",
+				__func__, tps->vsel1_gpio, ret);
 			goto err_gpio1;
 		}
 		tps->valid_gpios = true;
@@ -380,7 +402,7 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 
 	ret = tps62360_init_dcdc(tps, pdata);
 	if (ret < 0) {
-		dev_err(tps->dev, "%s() Err: Init fails with = %d\n",
+		dev_err(tps->dev, "%s(): Init failed with err = %d\n",
 				__func__, ret);
 		goto err_init;
 	}
@@ -392,8 +414,9 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 	/* Register the regulators */
 	rdev = regulator_register(&tps->desc, &config);
 	if (IS_ERR(rdev)) {
-		dev_err(tps->dev, "%s() Err: Failed to register %s\n",
-				__func__, id->name);
+		dev_err(tps->dev,
+			"%s(): regulator register failed with err %s\n",
+			__func__, id->name);
 		ret = PTR_ERR(rdev);
 		goto err_init;
 	}
@@ -442,8 +465,9 @@ static void tps62360_shutdown(struct i2c_client *client)
 	/* Configure the output discharge path */
 	st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2));
 	if (st < 0)
-		dev_err(tps->dev, "%s() fails in updating reg %d\n",
-			__func__, REG_RAMPCTRL);
+		dev_err(tps->dev,
+			"%s(): register %d update failed with err %d\n",
+			__func__, REG_RAMPCTRL, st);
 }
 
 static const struct i2c_device_id tps62360_id[] = {

drivers/regulator/tps65023-regulator.c

@@ -23,7 +23,6 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
 

drivers/regulator/tps6507x-regulator.c

@@ -23,7 +23,6 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/tps6507x.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/mfd/tps6507x.h>
 
@@ -283,7 +282,7 @@ static int tps6507x_pmic_disable(struct regulator_dev *dev)
 					1 << shift);
 }
 
-static int tps6507x_pmic_get_voltage(struct regulator_dev *dev)
+static int tps6507x_pmic_get_voltage_sel(struct regulator_dev *dev)
 {
 	struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
 	int data, rid = rdev_get_id(dev);
@@ -325,7 +324,7 @@ static int tps6507x_pmic_get_voltage(struct regulator_dev *dev)
 		return data;
 
 	data &= mask;
-	return tps->info[rid]->table[data] * 1000;
+	return data;
 }
 
 static int tps6507x_pmic_set_voltage_sel(struct regulator_dev *dev,
@@ -395,7 +394,7 @@ static struct regulator_ops tps6507x_pmic_ops = {
 	.is_enabled = tps6507x_pmic_is_enabled,
 	.enable = tps6507x_pmic_enable,
 	.disable = tps6507x_pmic_disable,
-	.get_voltage = tps6507x_pmic_get_voltage,
+	.get_voltage_sel = tps6507x_pmic_get_voltage_sel,
 	.set_voltage_sel = tps6507x_pmic_set_voltage_sel,
 	.list_voltage = tps6507x_pmic_list_voltage,
 };

drivers/regulator/tps65090-regulator.c

@@ -17,7 +17,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/err.h>

drivers/regulator/tps6586x-regulator.c

@@ -363,6 +363,7 @@ static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
 		return err;
 
 	config.dev = &pdev->dev;
+	config.of_node = pdev->dev.of_node;
 	config.init_data = pdev->dev.platform_data;
 	config.driver_data = ri;
 

drivers/regulator/tps65910-regulator.c

@@ -20,7 +20,6 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/mfd/tps65910.h>
@@ -579,10 +578,10 @@ static int tps65910_get_voltage_dcdc_sel(struct regulator_dev *dev)
 	return -EINVAL;
 }
 
-static int tps65910_get_voltage(struct regulator_dev *dev)
+static int tps65910_get_voltage_sel(struct regulator_dev *dev)
 {
 	struct tps65910_reg *pmic = rdev_get_drvdata(dev);
-	int reg, value, id = rdev_get_id(dev), voltage = 0;
+	int reg, value, id = rdev_get_id(dev);
 
 	reg = pmic->get_ctrl_reg(id);
 	if (reg < 0)
@@ -609,9 +608,7 @@ static int tps65910_get_voltage(struct regulator_dev *dev)
 		return -EINVAL;
 	}
 
-	voltage = pmic->info[id]->voltage_table[value] * 1000;
-
-	return voltage;
+	return value;
 }
 
 static int tps65910_get_voltage_vdd3(struct regulator_dev *dev)
@@ -619,10 +616,10 @@ static int tps65910_get_voltage_vdd3(struct regulator_dev *dev)
 	return 5 * 1000 * 1000;
 }
 
-static int tps65911_get_voltage(struct regulator_dev *dev)
+static int tps65911_get_voltage_sel(struct regulator_dev *dev)
 {
 	struct tps65910_reg *pmic = rdev_get_drvdata(dev);
-	int step_mv, id = rdev_get_id(dev);
+	int id = rdev_get_id(dev);
 	u8 value, reg;
 
 	reg = pmic->get_ctrl_reg(id);
@@ -635,13 +632,6 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
 	case TPS65911_REG_LDO4:
 		value &= LDO1_SEL_MASK;
 		value >>= LDO_SEL_SHIFT;
-		/* The first 5 values of the selector correspond to 1V */
-		if (value < 5)
-			value = 0;
-		else
-			value -= 4;
-
-		step_mv = 50;
 		break;
 	case TPS65911_REG_LDO3:
 	case TPS65911_REG_LDO5:
@@ -650,23 +640,16 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
 	case TPS65911_REG_LDO8:
 		value &= LDO3_SEL_MASK;
 		value >>= LDO_SEL_SHIFT;
-		/* The first 3 values of the selector correspond to 1V */
-		if (value < 3)
-			value = 0;
-		else
-			value -= 2;
-
-		step_mv = 100;
 		break;
 	case TPS65910_REG_VIO:
 		value &= LDO_SEL_MASK;
 		value >>= LDO_SEL_SHIFT;
-		return pmic->info[id]->voltage_table[value] * 1000;
+		break;
 	default:
 		return -EINVAL;
 	}
 
-	return (LDO_MIN_VOLT + value * step_mv) * 1000;
+	return value;
 }
 
 static int tps65910_set_voltage_dcdc_sel(struct regulator_dev *dev,
@@ -902,7 +885,7 @@ static struct regulator_ops tps65910_ops = {
 	.enable_time		= tps65910_enable_time,
 	.set_mode		= tps65910_set_mode,
 	.get_mode		= tps65910_get_mode,
-	.get_voltage		= tps65910_get_voltage,
+	.get_voltage_sel	= tps65910_get_voltage_sel,
 	.set_voltage_sel	= tps65910_set_voltage_sel,
 	.list_voltage		= tps65910_list_voltage,
 };
@@ -914,7 +897,7 @@ static struct regulator_ops tps65911_ops = {
 	.enable_time		= tps65910_enable_time,
 	.set_mode		= tps65910_set_mode,
 	.get_mode		= tps65910_get_mode,
-	.get_voltage		= tps65911_get_voltage,
+	.get_voltage_sel	= tps65911_get_voltage_sel,
 	.set_voltage_sel	= tps65911_set_voltage_sel,
 	.list_voltage		= tps65911_list_voltage,
 };

drivers/regulator/tps65912-regulator.c

@@ -20,7 +20,6 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/mfd/tps65912.h>
@@ -406,7 +405,7 @@ static int tps65912_list_voltage(struct regulator_dev *dev, unsigned selector)
 	return voltage;
 }
 
-static int tps65912_get_voltage(struct regulator_dev *dev)
+static int tps65912_get_voltage_sel(struct regulator_dev *dev)
 {
 	struct tps65912_reg *pmic = rdev_get_drvdata(dev);
 	struct tps65912 *mfd = pmic->mfd;
@@ -420,7 +419,7 @@ static int tps65912_get_voltage(struct regulator_dev *dev)
 	vsel = tps65912_reg_read(mfd, reg);
 	vsel &= 0x3F;
 
-	return tps65912_list_voltage(dev, vsel);
+	return vsel;
 }
 
 static int tps65912_set_voltage_sel(struct regulator_dev *dev,
@@ -445,7 +444,7 @@ static struct regulator_ops tps65912_ops_dcdc = {
 	.disable = tps65912_reg_disable,
 	.set_mode = tps65912_set_mode,
 	.get_mode = tps65912_get_mode,
-	.get_voltage = tps65912_get_voltage,
+	.get_voltage_sel = tps65912_get_voltage_sel,
 	.set_voltage_sel = tps65912_set_voltage_sel,
 	.list_voltage = tps65912_list_voltage,
 };
@@ -455,7 +454,7 @@ static struct regulator_ops tps65912_ops_ldo = {
 	.is_enabled = tps65912_reg_is_enabled,
 	.enable = tps65912_reg_enable,
 	.disable = tps65912_reg_disable,
-	.get_voltage = tps65912_get_voltage,
+	.get_voltage_sel = tps65912_get_voltage_sel,
 	.set_voltage_sel = tps65912_set_voltage_sel,
 	.list_voltage = tps65912_list_voltage,
 };

drivers/regulator/twl-regulator.c

@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -396,14 +395,12 @@ static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
  * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
  * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
  */
-#ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED
-#define UNSUP_MASK	0x0000
-#else
 #define UNSUP_MASK	0x8000
-#endif
 
 #define UNSUP(x)	(UNSUP_MASK | (x))
-#define IS_UNSUP(x)	(UNSUP_MASK & (x))
+#define IS_UNSUP(info, x)			\
+	((UNSUP_MASK & (x)) &&			\
+	 !((info)->features & TWL4030_ALLOW_UNSUPPORTED))
 #define LDO_MV(x)	(~UNSUP_MASK & (x))
 
 
@@ -477,7 +474,7 @@ static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int			mV = info->table[index];
 
-	return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000);
+	return IS_UNSUP(info, mV) ? 0 : (LDO_MV(mV) * 1000);
 }
 
 static int

drivers/regulator/userspace-consumer.c

@@ -115,7 +115,9 @@ static int regulator_userspace_consumer_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -EINVAL;
 
-	drvdata = kzalloc(sizeof(struct userspace_consumer_data), GFP_KERNEL);
+	drvdata = devm_kzalloc(&pdev->dev,
+			       sizeof(struct userspace_consumer_data),
+			       GFP_KERNEL);
 	if (drvdata == NULL)
 		return -ENOMEM;
 
@@ -125,16 +127,16 @@ static int regulator_userspace_consumer_probe(struct platform_device *pdev)
 
 	mutex_init(&drvdata->lock);
 
-	ret = regulator_bulk_get(&pdev->dev, drvdata->num_supplies,
-				 drvdata->supplies);
+	ret = devm_regulator_bulk_get(&pdev->dev, drvdata->num_supplies,
+				      drvdata->supplies);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to get supplies: %d\n", ret);
-		goto err_alloc_supplies;
+		return ret;
 	}
 
 	ret = sysfs_create_group(&pdev->dev.kobj, &attr_group);
 	if (ret != 0)
-		goto err_create_attrs;
+		return ret;
 
 	if (pdata->init_on) {
 		ret = regulator_bulk_enable(drvdata->num_supplies,
@@ -154,11 +156,6 @@ static int regulator_userspace_consumer_probe(struct platform_device *pdev)
 err_enable:
 	sysfs_remove_group(&pdev->dev.kobj, &attr_group);
 
-err_create_attrs:
-	regulator_bulk_free(drvdata->num_supplies, drvdata->supplies);
-
-err_alloc_supplies:
-	kfree(drvdata);
 	return ret;
 }
 
@@ -171,9 +168,6 @@ static int regulator_userspace_consumer_remove(struct platform_device *pdev)
 	if (data->enabled)
 		regulator_bulk_disable(data->num_supplies, data->supplies);
 
-	regulator_bulk_free(data->num_supplies, data->supplies);
-	kfree(data);
-
 	return 0;
 }
 

drivers/regulator/virtual.c

@@ -121,7 +121,7 @@ static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
 	struct virtual_consumer_data *data = dev_get_drvdata(dev);
 	long val;
 
-	if (strict_strtol(buf, 10, &val) != 0)
+	if (kstrtol(buf, 10, &val) != 0)
 		return count;
 
 	mutex_lock(&data->lock);
@@ -147,7 +147,7 @@ static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
 	struct virtual_consumer_data *data = dev_get_drvdata(dev);
 	long val;
 
-	if (strict_strtol(buf, 10, &val) != 0)
+	if (kstrtol(buf, 10, &val) != 0)
 		return count;
 
 	mutex_lock(&data->lock);
@@ -173,7 +173,7 @@ static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
 	struct virtual_consumer_data *data = dev_get_drvdata(dev);
 	long val;
 
-	if (strict_strtol(buf, 10, &val) != 0)
+	if (kstrtol(buf, 10, &val) != 0)
 		return count;
 
 	mutex_lock(&data->lock);
@@ -199,7 +199,7 @@ static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
 	struct virtual_consumer_data *data = dev_get_drvdata(dev);
 	long val;
 
-	if (strict_strtol(buf, 10, &val) != 0)
+	if (kstrtol(buf, 10, &val) != 0)
 		return count;
 
 	mutex_lock(&data->lock);
@@ -291,18 +291,19 @@ static int __devinit regulator_virtual_probe(struct platform_device *pdev)
 	struct virtual_consumer_data *drvdata;
 	int ret;
 
-	drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct virtual_consumer_data),
+			       GFP_KERNEL);
 	if (drvdata == NULL)
 		return -ENOMEM;
 
 	mutex_init(&drvdata->lock);
 
-	drvdata->regulator = regulator_get(&pdev->dev, reg_id);
+	drvdata->regulator = devm_regulator_get(&pdev->dev, reg_id);
 	if (IS_ERR(drvdata->regulator)) {
 		ret = PTR_ERR(drvdata->regulator);
 		dev_err(&pdev->dev, "Failed to obtain supply '%s': %d\n",
 			reg_id, ret);
-		goto err;
+		return ret;
 	}
 
 	ret = sysfs_create_group(&pdev->dev.kobj,
@@ -310,7 +311,7 @@ static int __devinit regulator_virtual_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		dev_err(&pdev->dev,
 			"Failed to create attribute group: %d\n", ret);
-		goto err_regulator;
+		return ret;
 	}
 
 	drvdata->mode = regulator_get_mode(drvdata->regulator);
@@ -318,12 +319,6 @@ static int __devinit regulator_virtual_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, drvdata);
 
 	return 0;
-
-err_regulator:
-	regulator_put(drvdata->regulator);
-err:
-	kfree(drvdata);
-	return ret;
 }
 
 static int __devexit regulator_virtual_remove(struct platform_device *pdev)
@@ -334,9 +329,6 @@ static int __devexit regulator_virtual_remove(struct platform_device *pdev)
 
 	if (drvdata->enabled)
 		regulator_disable(drvdata->regulator);
-	regulator_put(drvdata->regulator);
-
-	kfree(drvdata);
 
 	platform_set_drvdata(pdev, NULL);
 

drivers/regulator/wm831x-dcdc.c

@@ -35,7 +35,7 @@
 #define WM831X_DCDC_MODE_IDLE    2
 #define WM831X_DCDC_MODE_STANDBY 3
 
-#define WM831X_DCDC_MAX_NAME 6
+#define WM831X_DCDC_MAX_NAME 9
 
 /* Register offsets in control block */
 #define WM831X_DCDC_CONTROL_1     0
@@ -50,6 +50,7 @@
 
 struct wm831x_dcdc {
 	char name[WM831X_DCDC_MAX_NAME];
+	char supply_name[WM831X_DCDC_MAX_NAME];
 	struct regulator_desc desc;
 	int base;
 	struct wm831x *wm831x;
@@ -402,23 +403,17 @@ static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
 	if (!pdata || !pdata->dvs_gpio)
 		return;
 
-	ret = gpio_request(pdata->dvs_gpio, "DCDC DVS");
-	if (ret < 0) {
-		dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",
-			dcdc->name, ret);
-		return;
-	}
-
 	/* gpiolib won't let us read the GPIO status so pick the higher
 	 * of the two existing voltages so we take it as platform data.
 	 */
 	dcdc->dvs_gpio_state = pdata->dvs_init_state;
 
-	ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state);
+	ret = gpio_request_one(pdata->dvs_gpio,
+			       dcdc->dvs_gpio_state ? GPIOF_INIT_HIGH : 0,
+			       "DCDC DVS");
 	if (ret < 0) {
-		dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n",
+		dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",
 			dcdc->name, ret);
-		gpio_free(pdata->dvs_gpio);
 		return;
 	}
 
@@ -496,6 +491,11 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 
 	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
 	dcdc->desc.name = dcdc->name;
+
+	snprintf(dcdc->supply_name, sizeof(dcdc->supply_name),
+		 "DC%dVDD", id + 1);
+	dcdc->desc.supply_name = dcdc->supply_name;
+
 	dcdc->desc.id = id;
 	dcdc->desc.type = REGULATOR_VOLTAGE;
 	dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
@@ -697,6 +697,11 @@ static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
 
 	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
 	dcdc->desc.name = dcdc->name;
+
+	snprintf(dcdc->supply_name, sizeof(dcdc->supply_name),
+		 "DC%dVDD", id + 1);
+	dcdc->desc.supply_name = dcdc->supply_name;
+
 	dcdc->desc.id = id;
 	dcdc->desc.type = REGULATOR_VOLTAGE;
 	dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;

drivers/regulator/wm831x-ldo.c

@@ -25,7 +25,7 @@
 #include <linux/mfd/wm831x/regulator.h>
 #include <linux/mfd/wm831x/pdata.h>
 
-#define WM831X_LDO_MAX_NAME 6
+#define WM831X_LDO_MAX_NAME 9
 
 #define WM831X_LDO_CONTROL       0
 #define WM831X_LDO_ON_CONTROL    1
@@ -36,6 +36,7 @@
 
 struct wm831x_ldo {
 	char name[WM831X_LDO_MAX_NAME];
+	char supply_name[WM831X_LDO_MAX_NAME];
 	struct regulator_desc desc;
 	int base;
 	struct wm831x *wm831x;
@@ -291,6 +292,11 @@ static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
 
 	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
 	ldo->desc.name = ldo->name;
+
+	snprintf(ldo->supply_name, sizeof(ldo->supply_name),
+		 "LDO%dVDD", id + 1);
+	ldo->desc.supply_name = ldo->supply_name;
+
 	ldo->desc.id = id;
 	ldo->desc.type = REGULATOR_VOLTAGE;
 	ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
@@ -547,6 +553,11 @@ static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
 
 	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
 	ldo->desc.name = ldo->name;
+
+	snprintf(ldo->supply_name, sizeof(ldo->supply_name),
+		 "LDO%dVDD", id + 1);
+	ldo->desc.supply_name = ldo->supply_name;
+
 	ldo->desc.id = id;
 	ldo->desc.type = REGULATOR_VOLTAGE;
 	ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
@@ -733,6 +744,11 @@ static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev)
 
 	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
 	ldo->desc.name = ldo->name;
+
+	snprintf(ldo->supply_name, sizeof(ldo->supply_name),
+		 "LDO%dVDD", id + 1);
+	ldo->desc.supply_name = ldo->supply_name;
+
 	ldo->desc.id = id;
 	ldo->desc.type = REGULATOR_VOLTAGE;
 	ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1;

drivers/regulator/wm8994-regulator.c

@@ -182,23 +182,16 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
 	if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
 		ldo->enable = pdata->ldo[id].enable;
 
-		ret = gpio_request(ldo->enable, "WM8994 LDO enable");
+		ret = gpio_request_one(ldo->enable, 0, "WM8994 LDO enable");
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n",
 				ret);
 			goto err;
 		}
-
-		ret = gpio_direction_output(ldo->enable, ldo->is_enabled);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "Failed to set GPIO up: %d\n",
-				ret);
-			goto err_gpio;
-		}
 	} else
 		ldo->is_enabled = true;
 
-	config.dev = &pdev->dev;
+	config.dev = wm8994->dev;
 	config.init_data = pdata->ldo[id].init_data;
 	config.driver_data = ldo;
 	config.regmap = wm8994->regmap;

include/linux/i2c/twl.h

@@ -171,8 +171,6 @@ static inline int twl_class_is_ ##class(void)	\
 TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
 TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
 
-#define TWL6025_SUBCLASS	BIT(4)  /* TWL6025 has changed registers */
-
 /*
  * Read and write single 8-bit registers
  */
@@ -746,6 +744,17 @@ struct twl_regulator_driver_data {
 	void		*data;
 	unsigned long	features;
 };
+/* chip-specific feature flags, for twl_regulator_driver_data.features */
+#define TWL4030_VAUX2		BIT(0)	/* pre-5030 voltage ranges */
+#define TPS_SUBSET		BIT(1)	/* tps659[23]0 have fewer LDOs */
+#define TWL5031			BIT(2)  /* twl5031 has different registers */
+#define TWL6030_CLASS		BIT(3)	/* TWL6030 class */
+#define TWL6025_SUBCLASS	BIT(4)  /* TWL6025 has changed registers */
+#define TWL4030_ALLOW_UNSUPPORTED BIT(5) /* Some voltages are possible
+					  * but not officially supported.
+					  * This flag is necessary to
+					  * enable them.
+					  */
 
 /*----------------------------------------------------------------------*/
 

include/linux/mfd/tps6586x.h

@@ -68,6 +68,7 @@ struct tps6586x_subdev_info {
 	int		id;
 	const char	*name;
 	void		*platform_data;
+	struct device_node *of_node;
 };
 
 struct tps6586x_platform_data {

include/linux/regulator/of_regulator.h

@@ -6,10 +6,20 @@
 #ifndef __LINUX_OF_REG_H
 #define __LINUX_OF_REG_H
 
+struct of_regulator_match {
+	const char *name;
+	void *driver_data;
+	struct regulator_init_data *init_data;
+	struct device_node *of_node;
+};
+
 #if defined(CONFIG_OF)
 extern struct regulator_init_data
 	*of_get_regulator_init_data(struct device *dev,
 				    struct device_node *node);
+extern int of_regulator_match(struct device *dev, struct device_node *node,
+			      struct of_regulator_match *matches,
+			      unsigned int num_matches);
 #else
 static inline struct regulator_init_data
 	*of_get_regulator_init_data(struct device *dev,
@@ -17,6 +27,14 @@ static inline struct regulator_init_data
 {
 	return NULL;
 }
+
+static inline int of_regulator_match(struct device *dev,
+				     struct device_node *node,
+				     struct of_regulator_match *matches,
+				     unsigned int num_matches)
+{
+	return 0;
+}
 #endif /* CONFIG_OF */
 
 #endif /* __LINUX_OF_REG_H */