ath9k_hw: Fix incorrect Tx control power in AR9003 template

commit 15052f81 upstream.

CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom.
Setting incorrect CTL power in calibration is causing lower tx power.
Tx power was reported as 3dBm while operating in channel 6 HT40+/
in channel 11 HT40- due to CTL powers in the calibration is set to
zero.
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/net/wireless/ath/ath9k/ar9003_eeprom.c

@@ -306,7 +306,7 @@ static const struct ar9300_eeprom ar9300_default = {
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
 
-		 { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 
@@ -883,7 +883,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
 
-		 { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 
@@ -2039,7 +2039,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
 		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
 
-		{ { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
 		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },