Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits)
  powerpc: Fix CHRP PCI config access for indirect_pci
  powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs
  powerpc: Fix 32-bit SMP boot on CHRP
  powerpc: Fix link errors on 32-bit machines using legacy DMA
  powerpc/pci: Improve detection of unassigned bridge resources
  hvc_console: Fix free_irq in spinlocked section
  powerpc: Get USE_STRICT_MM_TYPECHECKS working again
  powerpc: Reflect the used arguments in machine_init() prototype
  powerpc: Fix DMA offset for non-coherent DMA
  powerpc: fix fsl_upm nand driver modular build
  powerpc/83xx: add NAND support for the MPC8360E-RDK boards
  powerpc: FPGA support for GE Fanuc SBC610
  i2c: MPC8349E-mITX Power Management and GPIO expander driver
  powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree
  powerpc: document the "fsl,ssi-dma-channel" compatible property
  powerpc: disable CHRP and PMAC support in various defconfigs
  OF: add fsl,mcu-mpc8349emitx to the exception list
  powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
  powerpc: remove support for bootmem-allocated memory for the DIU driver
  powerpc: remove non-dependent load fsl_booke PTE_64BIT
  ...

Documentation/powerpc/00-INDEX

@@ -18,10 +18,6 @@ mpc52xx.txt
 	- Linux 2.6.x on MPC52xx family
 mpc52xx-device-tree-bindings.txt
 	- MPC5200 Device Tree Bindings
-ppc_htab.txt
-	- info about the Linux/PPC /proc/ppc_htab entry
-smp.txt
-	- use and state info about Linux/PPC on MP machines
 sound.txt
 	- info on sound support under Linux/PPC
 zImage_layout.txt

Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt

+* Freescale 83xx and 512x PCI bridges
+
+Freescale 83xx and 512x SOCs include the same pci bridge core.
+
+83xx/512x specific notes:
+- reg: should contain two address length tuples
+    The first is for the internal pci bridge registers
+    The second is for the pci config space access registers
+
+Example (MPC8313ERDB)
+	pci0: pci@e0008500 {
+		cell-index = <1>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0E -mini PCI */
+				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+				/* IDSEL 0x0F - PCI slot */
+				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};

Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt

+GPIO controllers on MPC8xxx SoCs
+
+This is for the non-QE/CPM/GUTs GPIO controllers as found on
+8349, 8572, 8610 and compatible.
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Required properties:
+- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
+  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+ - interrupts : Interrupt mapping for GPIO IRQ (currently unused).
+ - interrupt-parent : Phandle for the interrupt controller that
+   services interrupts for this device.
+- gpio-controller : Marks the port as GPIO controller.
+
+Example of gpio-controller nodes for a MPC8347 SoC:
+
+	gpio1: gpio-controller@c00 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+		reg = <0xc00 0x100>;
+		interrupts = <74 0x8>;
+		interrupt-parent = <&ipic>;
+		gpio-controller;
+	};
+
+	gpio2: gpio-controller@d00 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+		reg = <0xd00 0x100>;
+		interrupts = <75 0x8>;
+		interrupt-parent = <&ipic>;
+		gpio-controller;
+	};
+
+See booting-without-of.txt for details of how to specify GPIO
+information for devices.

Documentation/powerpc/dts-bindings/fsl/dma.txt

@@ -20,7 +20,7 @@ Required properties:
         - compatible        : compatible list, contains 2 entries, first is
 			 "fsl,CHIP-dma-channel", where CHIP is the processor
 			 (mpc8349, mpc8350, etc.) and the second is
-			 "fsl,elo-dma-channel"
+			 "fsl,elo-dma-channel". However, see note below.
         - reg               : <registers mapping for channel>
         - cell-index        : dma channel index starts at 0.
 
@@ -82,7 +82,7 @@ Required properties:
         - compatible        : compatible list, contains 2 entries, first is
 			 "fsl,CHIP-dma-channel", where CHIP is the processor
 			 (mpc8540, mpc8560, etc.) and the second is
-			 "fsl,eloplus-dma-channel"
+			 "fsl,eloplus-dma-channel". However, see note below.
         - cell-index        : dma channel index starts at 0.
         - reg               : <registers mapping for channel>
         - interrupts        : <interrupt mapping for DMA channel IRQ>
@@ -125,3 +125,12 @@ Example:
 			interrupts = <17 2>;
 		};
 	};
+
+Note on DMA channel compatible properties: The compatible property must say
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+driver (fsldma).  Any DMA channel used by fsldma cannot be used by another
+DMA driver, such as the SSI sound drivers for the MPC8610.  Therefore, any DMA
+channel that should be used for another driver should not use
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel".  For the SSI drivers, for
+example, the compatible property should be "fsl,ssi-dma-channel".  See ssi.txt
+for more information.

Documentation/powerpc/dts-bindings/fsl/ssi.txt

@@ -24,6 +24,12 @@ Required properties:
 		    "rj-master" - r.j., SSI is clock master
 		    "ac97-slave" - AC97 mode, SSI is clock slave
 		    "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: phandle to a node for the DMA channel to use for
+                    playback of audio.  This is typically dictated by SOC
+                    design.  See the notes below.
+- fsl,capture-dma:  phandle to a node for the DMA channel to use for
+                    capture (recording) of audio.  This is typically dictated
+                    by SOC design.  See the notes below.
 
 Optional properties:
 - codec-handle	  : phandle to a 'codec' node that defines an audio
@@ -36,3 +42,20 @@ Child 'codec' node required properties:
 Child 'codec' node optional properties:
 - clock-frequency  : The frequency of the input clock, which typically
                      comes from an on-board dedicated oscillator.
+
+Notes on fsl,playback-dma and fsl,capture-dma:
+
+On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+and capture.  On the MPC8610, for example, SSI1 must use DMA channel 0 for
+playback and DMA channel 1 for capture.  SSI2 must use DMA channel 2 for
+playback and DMA channel 3 for capture.  The developer can choose which
+DMA controller to use, but the channels themselves are hard-wired.  The
+purpose of these two properties is to represent this hardware design.
+
+The device tree nodes for the DMA channels that are referenced by
+"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+"fsl,ssi-dma-channel".  The SOC-specific compatible string (e.g.
+"fsl,mpc8610-dma-channel") can remain.  If these nodes are left as
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+drivers (fsldma) will attempt to use them, and it will conflict with the
+sound drivers.

Documentation/powerpc/ppc_htab.txt

-                 Information about /proc/ppc_htab
-=====================================================================
-
-This document and the related code was written by me (Cort Dougan), please
-email me (cort@fsmlabs.com) if you have questions, comments or corrections.
-
-Last Change: 2.16.98
-
-This entry in the proc directory is readable by all users but only
-writable by root.
-
-The ppc_htab interface is a user level way of accessing the
-performance monitoring registers as well as providing information
-about the PTE hash table.
-
-1. Reading
-
-  Reading this file will give you information about the memory management
-  hash table that serves as an extended tlb for page translation on the
-  powerpc.  It will also give you information about performance measurement
-  specific to the cpu that you are using.
-
-  Explanation of the 604 Performance Monitoring Fields:
-    MMCR0 - the current value of the MMCR0 register
-    PMC1
-    PMC2 - the value of the performance counters and a
-           description of what events they are counting
-           which are based on MMCR0 bit settings.
-  Explanation of the PTE Hash Table fields:
-
-    Size - hash table size in Kb.
-    Buckets -  number of buckets in the table.
-    Address - the virtual kernel address of the hash table base.
-    Entries - the number of ptes that can be stored in the hash table.
-    User/Kernel - how many pte's are in use by the kernel or user at that time.
-    Overflows - How many of the entries are in their secondary hash location.
-    Percent full - ratio of free pte entries to in use entries.
-    Reloads - Count of how many hash table misses have occurred
-              that were fixed with a reload from the linux tables.
-              Should always be 0 on 603 based machines.
-    Non-error Misses - Count of how many hash table misses have occurred
-              that were completed with the creation of a pte in the linux
-              tables with a call to do_page_fault().
-    Error Misses - Number of misses due to errors such as bad address
-              and permission violations.  This includes kernel access of
-              bad user addresses that are fixed up by the trap handler.
-
-  Note that calculation of the data displayed from /proc/ppc_htab takes
-  a long time and spends a great deal of time in the kernel.  It would
-  be quite hard on performance to read this file constantly.  In time
-  there may be a counter in the kernel that allows successive reads from
-  this file only after a given amount of time has passed to reduce the
-  possibility of a user slowing the system by reading this file.
-
-2. Writing
-
-  Writing to the ppc_htab allows you to change the characteristics of
-  the powerpc PTE hash table and setup performance monitoring.
-
-  Resizing the PTE hash table is not enabled right now due to many
-  complications with moving the hash table, rehashing the entries
-  and many many SMP issues that would have to be dealt with.
-
-  Write options to ppc_htab:
-  
-   - To set the size of the hash table to 64Kb:
-
-      echo 'size 64' > /proc/ppc_htab
-
-     The size must be a multiple of 64 and must be greater than or equal to
-     64.
-
-   - To turn off performance monitoring:
-
-      echo 'off' > /proc/ppc_htab
-
-   - To reset the counters without changing what they're counting:
-
-      echo 'reset' > /proc/ppc_htab
-
-     Note that counting will continue after the reset if it is enabled.
-
-   - To count only events in user mode or only in kernel mode:
-
-      echo 'user' > /proc/ppc_htab
-       ...or...
-      echo 'kernel' > /proc/ppc_htab
-
-     Note that these two options are exclusive of one another and the
-     lack of either of these options counts user and kernel.
-     Using 'reset' and 'off' reset these flags.
-
-   - The 604 has 2 performance counters which can each count events from
-     a specific set of events.  These sets are disjoint so it is not
-     possible to count _any_ combination of 2 events.  One event can
-     be counted by PMC1 and one by PMC2.
-
-     To start counting a particular event use:
-
-      echo 'event' > /proc/ppc_htab
-
-     and choose from these events:
-
-     PMC1
-     ----
-      'ic miss' - instruction cache misses
-      'dtlb' - data tlb misses (not hash table misses)
-
-     PMC2
-     ----
-      'dc miss' - data cache misses
-      'itlb' - instruction tlb misses (not hash table misses)
-      'load miss time' - cycles to complete a load miss
-
-3. Bugs
-
-  The PMC1 and PMC2 counters can overflow and give no indication of that
-  in /proc/ppc_htab.

Documentation/powerpc/smp.txt

-                 Information about Linux/PPC SMP mode
-=====================================================================
-
-This document and the related code was written by me
-(Cort Dougan, cort@fsmlabs.com) please email me if you have questions,
-comments or corrections.
-
-Last Change: 3.31.99
-
-If you want to help by writing code or testing different hardware please
-email me!
-
-1. State of Supported Hardware
-
-  PowerSurge Architecture - tested on UMAX s900, Apple 9600
-    The second processor on this machine boots up just fine and
-    enters its idle loop.  Hopefully a completely working SMP kernel
-    on this machine will be done shortly.
-
-    The code makes the assumption of only two processors.  The changes
-    necessary to work with any number would not be overly difficult but
-    I don't have any machines with >2 processors so it's not high on my
-    list of priorities.  If anyone else would like do to the work email
-    me and I can point out the places that need changed.  If you have >2
-    processors and don't want to add support yourself let me know and I
-    can take a look into it.
-
-  BeBox
-    BeBox support hasn't been added to the 2.1.X kernels from 2.0.X
-    but work is being done and SMP support for BeBox is in the works.
-
-  CHRP
-    CHRP SMP works and is fairly solid.  It's been tested on the IBM F50
-    with 4 processors for quite some time now.

arch/powerpc/Kconfig

@@ -415,8 +415,11 @@ config PPC_64K_PAGES
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
+	range 9 64 if PPC_64K_PAGES
 	default "9" if PPC_64K_PAGES
+	range 13 64 if PPC64 && !PPC_64K_PAGES
 	default "13" if PPC64 && !PPC_64K_PAGES
+	range 11 64
 	default "11"
 	help
 	  The kernel memory allocator divides physically contiguous memory
@@ -806,6 +809,19 @@ config PIN_TLB
 endmenu
 
 if PPC64
+config RELOCATABLE
+	bool "Build a relocatable kernel"
+	help
+	  This builds a kernel image that is capable of running anywhere
+	  in the RMA (real memory area) at any 16k-aligned base address.
+	  The kernel is linked as a position-independent executable (PIE)
+	  and contains dynamic relocations which are processed early
+	  in the bootup process.
+
+	  One use is for the kexec on panic case where the recovery kernel
+	  must live at a different physical address than the primary
+	  kernel.
+
 config PAGE_OFFSET
 	hex
 	default "0xc000000000000000"

arch/powerpc/Kconfig.debug

@@ -51,6 +51,11 @@ config FTR_FIXUP_SELFTEST
 	depends on DEBUG_KERNEL
 	default n
 
+config MSI_BITMAP_SELFTEST
+	bool "Run self-tests of the MSI bitmap code."
+	depends on DEBUG_KERNEL
+	default n
+
 config XMON
 	bool "Include xmon kernel debugger"
 	depends on DEBUG_KERNEL

arch/powerpc/Makefile

@@ -63,7 +63,9 @@ override CC	+= -m$(CONFIG_WORD_SIZE)
 override AR	:= GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
 endif
 
-LDFLAGS_vmlinux	:= -Bstatic
+LDFLAGS_vmlinux-yy := -Bstatic
+LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie
+LDFLAGS_vmlinux	:= $(LDFLAGS_vmlinux-yy)
 
 CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=none  -mcall-aixdesc
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
@@ -102,7 +104,10 @@ endif
 KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
 
 # No SPE instruction when building kernel
+# (We use all available options to help semi-broken compilers)
 KBUILD_CFLAGS += $(call cc-option,-mno-spe)
+KBUILD_CFLAGS += $(call cc-option,-mspe=no)
+KBUILD_CFLAGS += $(call cc-option,-mabi=no-spe)
 
 # Enable unit-at-a-time mode when possible. It shrinks the
 # kernel considerably.

arch/powerpc/boot/Makefile

@@ -310,8 +310,11 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
 $(obj)/vmlinux.strip: vmlinux
 	$(STRIP) -s -R .comment $< -o $@
 
+# The iseries hypervisor won't take an ET_DYN executable, so this
+# changes the type (byte 17) in the file to ET_EXEC (2).
 $(obj)/zImage.iseries: vmlinux
 	$(STRIP) -s -R .comment $< -o $@
+	printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
 
 $(obj)/uImage: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,uboot)

arch/powerpc/boot/addnote.c

@@ -11,7 +11,12 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * Usage: addnote zImage
+ * Usage: addnote zImage [note.elf]
+ *
+ * If note.elf is supplied, it is the name of an ELF file that contains
+ * an RPA note to use instead of the built-in one.  Alternatively, the
+ * note.elf file may be empty, in which case the built-in RPA note is
+ * used (this is to simplify how this is invoked from the wrapper script).
  */
 #include <stdio.h>
 #include <stdlib.h>
@@ -43,27 +48,29 @@ char rpaname[] = "IBM,RPA-Client-Config";
  */
 #define N_RPA_DESCR	8
 unsigned int rpanote[N_RPA_DESCR] = {
-	0,			/* lparaffinity */
-	64,			/* min_rmo_size */
+	1,			/* lparaffinity */
+	128,			/* min_rmo_size */
 	0,			/* min_rmo_percent */
-	40,			/* max_pft_size */
+	46,			/* max_pft_size */
 	1,			/* splpar */
 	-1,			/* min_load */
-	0,			/* new_mem_def */
-	1,			/* ignore_my_client_config */
+	1,			/* new_mem_def */
+	0,			/* ignore_my_client_config */
 };
 
 #define ROUNDUP(len)	(((len) + 3) & ~3)
 
 unsigned char buf[512];
+unsigned char notebuf[512];
 
-#define GET_16BE(off)	((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off)	((GET_16BE(off) << 16) + GET_16BE((off)+2))
+#define GET_16BE(b, off)	(((b)[off] << 8) + ((b)[(off)+1]))
+#define GET_32BE(b, off)	((GET_16BE((b), (off)) << 16) + \
+				 GET_16BE((b), (off)+2))
 
-#define PUT_16BE(off, v)	(buf[off] = ((v) >> 8) & 0xff, \
-				 buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v)	(PUT_16BE((off), (v) >> 16), \
-				 PUT_16BE((off) + 2, (v)))
+#define PUT_16BE(b, off, v)	((b)[off] = ((v) >> 8) & 0xff, \
+				 (b)[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(b, off, v)	(PUT_16BE((b), (off), (v) >> 16), \
+				 PUT_16BE((b), (off) + 2, (v)))
 
 /* Structure of an ELF file */
 #define E_IDENT		0	/* ELF header */
@@ -88,15 +95,71 @@ unsigned char buf[512];
 
 unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
 
+unsigned char *read_rpanote(const char *fname, int *nnp)
+{
+	int notefd, nr, i;
+	int ph, ps, np;
+	int note, notesize;
+
+	notefd = open(fname, O_RDONLY);
+	if (notefd < 0) {
+		perror(fname);
+		exit(1);
+	}
+	nr = read(notefd, notebuf, sizeof(notebuf));
+	if (nr < 0) {
+		perror("read note");
+		exit(1);
+	}
+	if (nr == 0)		/* empty file */
+		return NULL;
+	if (nr < E_HSIZE ||
+	    memcmp(&notebuf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0 ||
+	    notebuf[E_IDENT+EI_CLASS] != ELFCLASS32 ||
+	    notebuf[E_IDENT+EI_DATA] != ELFDATA2MSB)
+		goto notelf;
+	close(notefd);
+
+	/* now look for the RPA-note */
+	ph = GET_32BE(notebuf, E_PHOFF);
+	ps = GET_16BE(notebuf, E_PHENTSIZE);
+	np = GET_16BE(notebuf, E_PHNUM);
+	if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
+		goto notelf;
+
+	for (i = 0; i < np; ++i, ph += ps) {
+		if (GET_32BE(notebuf, ph + PH_TYPE) != PT_NOTE)
+			continue;
+		note = GET_32BE(notebuf, ph + PH_OFFSET);
+		notesize = GET_32BE(notebuf, ph + PH_FILESZ);
+		if (notesize < 34 || note + notesize > nr)
+			continue;
+		if (GET_32BE(notebuf, note) != strlen(rpaname) + 1 ||
+		    GET_32BE(notebuf, note + 8) != 0x12759999 ||
+		    strcmp((char *)&notebuf[note + 12], rpaname) != 0)
+			continue;
+		/* looks like an RPA note, return it */
+		*nnp = notesize;
+		return &notebuf[note];
+	}
+	/* no RPA note found */
+	return NULL;
+
+ notelf:
+	fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", fname);
+	exit(1);
+}
+
 int
 main(int ac, char **av)
 {
 	int fd, n, i;
 	int ph, ps, np;
 	int nnote, nnote2, ns;
+	unsigned char *rpap;
 
-	if (ac != 2) {
-		fprintf(stderr, "Usage: %s elf-file\n", av[0]);
+	if (ac != 2 && ac != 3) {
+		fprintf(stderr, "Usage: %s elf-file [rpanote.elf]\n", av[0]);
 		exit(1);
 	}
 	fd = open(av[1], O_RDWR);
@@ -107,6 +170,7 @@ main(int ac, char **av)
 
 	nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr);
 	nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote);
+	rpap = NULL;
 
 	n = read(fd, buf, sizeof(buf));
 	if (n < 0) {
@@ -124,16 +188,19 @@ main(int ac, char **av)
 		exit(1);
 	}
 
-	ph = GET_32BE(E_PHOFF);
-	ps = GET_16BE(E_PHENTSIZE);
-	np = GET_16BE(E_PHNUM);
+	if (ac == 3)
+		rpap = read_rpanote(av[2], &nnote2);
+
+	ph = GET_32BE(buf, E_PHOFF);
+	ps = GET_16BE(buf, E_PHENTSIZE);
+	np = GET_16BE(buf, E_PHNUM);
 	if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
 		goto notelf;
 	if (ph + (np + 2) * ps + nnote + nnote2 > n)
 		goto nospace;
 
 	for (i = 0; i < np; ++i) {
-		if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
+		if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) {
 			fprintf(stderr, "%s already has a note entry\n",
 				av[1]);
 			exit(0);
@@ -148,37 +215,42 @@ main(int ac, char **av)
 
 	/* fill in the program header entry */
 	ns = ph + 2 * ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote);
+	PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
+	PUT_32BE(buf, ph + PH_OFFSET, ns);
+	PUT_32BE(buf, ph + PH_FILESZ, nnote);
 
 	/* fill in the note area we point to */
 	/* XXX we should probably make this a proper section */
-	PUT_32BE(ns, strlen(arch) + 1);
-	PUT_32BE(ns + 4, N_DESCR * 4);
-	PUT_32BE(ns + 8, 0x1275);
+	PUT_32BE(buf, ns, strlen(arch) + 1);
+	PUT_32BE(buf, ns + 4, N_DESCR * 4);
+	PUT_32BE(buf, ns + 8, 0x1275);
 	strcpy((char *) &buf[ns + 12], arch);
 	ns += 12 + strlen(arch) + 1;
 	for (i = 0; i < N_DESCR; ++i, ns += 4)
-		PUT_32BE(ns, descr[i]);
+		PUT_32BE(buf, ns, descr[i]);
 
 	/* fill in the second program header entry and the RPA note area */
 	ph += ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote2);
+	PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
+	PUT_32BE(buf, ph + PH_OFFSET, ns);
+	PUT_32BE(buf, ph + PH_FILESZ, nnote2);
 
 	/* fill in the note area we point to */
-	PUT_32BE(ns, strlen(rpaname) + 1);
-	PUT_32BE(ns + 4, sizeof(rpanote));
-	PUT_32BE(ns + 8, 0x12759999);
-	strcpy((char *) &buf[ns + 12], rpaname);
-	ns += 12 + ROUNDUP(strlen(rpaname) + 1);
-	for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
-		PUT_32BE(ns, rpanote[i]);
+	if (rpap) {
+		/* RPA note supplied in file, just copy the whole thing over */
+		memcpy(buf + ns, rpap, nnote2);
+	} else {
+		PUT_32BE(buf, ns, strlen(rpaname) + 1);
+		PUT_32BE(buf, ns + 4, sizeof(rpanote));
+		PUT_32BE(buf, ns + 8, 0x12759999);
+		strcpy((char *) &buf[ns + 12], rpaname);
+		ns += 12 + ROUNDUP(strlen(rpaname) + 1);
+		for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
+			PUT_32BE(buf, ns, rpanote[i]);
+	}
 
 	/* Update the number of program headers */
-	PUT_16BE(E_PHNUM, np + 2);
+	PUT_16BE(buf, E_PHNUM, np + 2);
 
 	/* write back */
 	lseek(fd, (long) 0, SEEK_SET);

arch/powerpc/boot/dtc-src/Makefile.dtc

@@ -5,21 +5,5 @@
 #
 DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
 	checks.c
-DTC_EXTRA = dtc.h srcpos.h
-DTC_LEXFILES = dtc-lexer.l
-DTC_BISONFILES = dtc-parser.y
-
-DTC_LEX_SRCS = $(DTC_LEXFILES:%.l=%.lex.c)
-DTC_BISON_SRCS = $(DTC_BISONFILES:%.y=%.tab.c)
-DTC_BISON_INCLUDES = $(DTC_BISONFILES:%.y=%.tab.h)
-
-DTC_GEN_SRCS = $(DTC_LEX_SRCS) $(DTC_BISON_SRCS)
-DTC_GEN_ALL = $(DTC_GEN_SRCS) $(DTC_BISON_INCLUDES)
+DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
 DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
-
-DTC_CLEANFILES = $(DTC_GEN_ALL)
-
-# We assume the containing Makefile system can do auto-dependencies for most
-# things, but we supply the dependencies on generated header files explicitly
-
-$(addprefix $(DTC_objdir)/,$(DTC_GEN_SRCS:%.c=%.o)): $(addprefix $(DTC_objdir)/,$(DTC_BISON_INCLUDES))

arch/powerpc/boot/dtc-src/data.c

@@ -32,8 +32,6 @@ void data_free(struct data d)
 		m = nm;
 	}
 
-	assert(!d.val || d.asize);
-
 	if (d.val)
 		free(d.val);
 }
@@ -43,9 +41,6 @@ struct data data_grow_for(struct data d, int xlen)
 	struct data nd;
 	int newsize;
 
-	/* we must start with an allocated datum */
-	assert(!d.val || d.asize);
-
 	if (xlen == 0)
 		return d;
 
@@ -56,11 +51,8 @@ struct data data_grow_for(struct data d, int xlen)
 	while ((d.len + xlen) > newsize)
 		newsize *= 2;
 
-	nd.asize = newsize;
 	nd.val = xrealloc(d.val, newsize);
 
-	assert(nd.asize >= (d.len + xlen));
-
 	return nd;
 }
 
@@ -83,16 +75,11 @@ static char get_oct_char(const char *s, int *i)
 	long val;
 
 	x[3] = '\0';
-	x[0] = s[(*i)];
-	if (x[0]) {
-		x[1] = s[(*i)+1];
-		if (x[1])
-			x[2] = s[(*i)+2];
-	}
+	strncpy(x, s + *i, 3);
 
 	val = strtol(x, &endx, 8);
-	if ((endx - x) == 0)
-		fprintf(stderr, "Empty \\nnn escape\n");
+
+	assert(endx > x);
 
 	(*i) += endx - x;
 	return val;
@@ -105,13 +92,11 @@ static char get_hex_char(const char *s, int *i)
 	long val;
 
 	x[2] = '\0';
-	x[0] = s[(*i)];
-	if (x[0])
-		x[1] = s[(*i)+1];
+	strncpy(x, s + *i, 2);
 
 	val = strtol(x, &endx, 16);
-	if ((endx - x) == 0)
-		fprintf(stderr, "Empty \\x escape\n");
+	if (!(endx  > x))
+		die("\\x used with no following hex digits\n");
 
 	(*i) += endx - x;
 	return val;
@@ -182,14 +167,29 @@ struct data data_copy_escape_string(const char *s, int len)
 	return d;
 }
 
-struct data data_copy_file(FILE *f, size_t len)
+struct data data_copy_file(FILE *f, size_t maxlen)
 {
-	struct data d;
+	struct data d = empty_data;
 
-	d = data_grow_for(empty_data, len);
+	while (!feof(f) && (d.len < maxlen)) {
+		size_t chunksize, ret;
 
-	d.len = len;
-	fread(d.val, len, 1, f);
+		if (maxlen == -1)
+			chunksize = 4096;
+		else
+			chunksize = maxlen - d.len;
+
+		d = data_grow_for(d, chunksize);
+		ret = fread(d.val + d.len, 1, chunksize, f);
+
+		if (ferror(f))
+			die("Error reading file into data: %s", strerror(errno));
+
+		if (d.len + ret < d.len)
+			die("Overflow reading file into data\n");
+
+		d.len += ret;
+	}
 
 	return d;
 }
@@ -247,7 +247,7 @@ struct data data_merge(struct data d1, struct data d2)
 
 struct data data_append_cell(struct data d, cell_t word)
 {
-	cell_t beword = cpu_to_be32(word);
+	cell_t beword = cpu_to_fdt32(word);
 
 	return data_append_data(d, &beword, sizeof(beword));
 }
@@ -256,15 +256,15 @@ struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
 {
 	struct fdt_reserve_entry bere;
 
-	bere.address = cpu_to_be64(re->address);
-	bere.size = cpu_to_be64(re->size);
+	bere.address = cpu_to_fdt64(re->address);
+	bere.size = cpu_to_fdt64(re->size);
 
 	return data_append_data(d, &bere, sizeof(bere));
 }
 
-struct data data_append_addr(struct data d, u64 addr)
+struct data data_append_addr(struct data d, uint64_t addr)
 {
-	u64 beaddr = cpu_to_be64(addr);
+	uint64_t beaddr = cpu_to_fdt64(addr);
 
 	return data_append_data(d, &beaddr, sizeof(beaddr));
 }

arch/powerpc/boot/dtc-src/dtc-lexer.l

@@ -28,6 +28,10 @@
 PROPNODECHAR	[a-zA-Z0-9,._+*#?@-]
 PATHCHAR	({PROPNODECHAR}|[/])
 LABEL		[a-zA-Z_][a-zA-Z0-9_]*
+STRING		\"([^\\"]|\\.)*\"
+WS		[[:space:]]
+COMMENT		"/*"([^*]|\*+[^*/])*\*+"/"
+LINECOMMENT	"//".*\n
 
 %{
 #include "dtc.h"
@@ -52,29 +56,26 @@ static int dts_version; /* = 0 */
 				DPRINT("<V1>\n"); \
 				BEGIN(V1); \
 			}
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
 %}
 
 %%
-<*>"/include/"		BEGIN(INCLUDE);
-
-<INCLUDE>\"[^"\n]*\"	{
-			yytext[strlen(yytext) - 1] = 0;
-			if (!push_input_file(yytext + 1)) {
-				/* Some unrecoverable error.*/
-				exit(1);
-			}
-			BEGIN_DEFAULT();
+<*>"/include/"{WS}*{STRING} {
+			char *name = strchr(yytext, '\"') + 1;
+			yytext[yyleng-1] = '\0';
+			push_input_file(name);
 		}
 
-
 <*><<EOF>>		{
 			if (!pop_input_file()) {
 				yyterminate();
 			}
 		}
 
-<*>\"([^\\"]|\\.)*\"	{
-			yylloc.filenum = srcpos_filenum;
+<*>{STRING}	{
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("String: %s\n", yytext);
 			yylval.data = data_copy_escape_string(yytext+1,
@@ -84,7 +85,7 @@ static int dts_version; /* = 0 */
 		}
 
 <*>"/dts-v1/"	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /dts-v1/\n");
 			dts_version = 1;
@@ -93,7 +94,7 @@ static int dts_version; /* = 0 */
 		}
 
 <*>"/memreserve/"	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /memreserve/\n");
 			BEGIN_DEFAULT();
@@ -101,7 +102,7 @@ static int dts_version; /* = 0 */
 		}
 
 <*>{LABEL}:	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Label: %s\n", yytext);
 			yylval.labelref = strdup(yytext);
@@ -110,7 +111,7 @@ static int dts_version; /* = 0 */
 		}
 
 <INITIAL>[bodh]# {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			if (*yytext == 'b')
 				yylval.cbase = 2;
@@ -125,7 +126,7 @@ static int dts_version; /* = 0 */
 		}
 
 <INITIAL>[0-9a-fA-F]+	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.literal = strdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
@@ -133,7 +134,7 @@ static int dts_version; /* = 0 */
 		}
 
 <V1>[0-9]+|0[xX][0-9a-fA-F]+      {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.literal = strdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
@@ -141,7 +142,7 @@ static int dts_version; /* = 0 */
 		}
 
 \&{LABEL}	{	/* label reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Ref: %s\n", yytext+1);
 			yylval.labelref = strdup(yytext+1);
@@ -149,7 +150,7 @@ static int dts_version; /* = 0 */
 		}
 
 "&{/"{PATHCHAR}+\}	{	/* new-style path reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yytext[yyleng-1] = '\0';
 			DPRINT("Ref: %s\n", yytext+2);
@@ -158,7 +159,7 @@ static int dts_version; /* = 0 */
 		}
 
 <INITIAL>"&/"{PATHCHAR}+ {	/* old-style path reference */
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Ref: %s\n", yytext+1);
 			yylval.labelref = strdup(yytext+1);
@@ -166,7 +167,7 @@ static int dts_version; /* = 0 */
 		}
 
 <BYTESTRING>[0-9a-fA-F]{2} {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			yylval.byte = strtol(yytext, NULL, 16);
 			DPRINT("Byte: %02x\n", (int)yylval.byte);
@@ -174,7 +175,7 @@ static int dts_version; /* = 0 */
 		}
 
 <BYTESTRING>"]"	{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("/BYTESTRING\n");
 			BEGIN_DEFAULT();
@@ -182,7 +183,7 @@ static int dts_version; /* = 0 */
 		}
 
 <PROPNODENAME>{PROPNODECHAR}+ {
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("PropNodeName: %s\n", yytext);
 			yylval.propnodename = strdup(yytext);
@@ -190,20 +191,19 @@ static int dts_version; /* = 0 */
 			return DT_PROPNODENAME;
 		}
 
-
-<*>[[:space:]]+	/* eat whitespace */
-
-<*>"/*"([^*]|\*+[^*/])*\*+"/"	{
-			yylloc.filenum = srcpos_filenum;
+"/incbin/"	{
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
-			DPRINT("Comment: %s\n", yytext);
-			/* eat comments */
+			DPRINT("Binary Include\n");
+			return DT_INCBIN;
 		}
 
-<*>"//".*\n	/* eat line comments */
+<*>{WS}+	/* eat whitespace */
+<*>{COMMENT}+	/* eat C-style comments */
+<*>{LINECOMMENT}+ /* eat C++-style comments */
 
 <*>.		{
-			yylloc.filenum = srcpos_filenum;
+			yylloc.file = srcpos_file;
 			yylloc.first_line = yylineno;
 			DPRINT("Char: %c (\\x%02x)\n", yytext[0],
 				(unsigned)yytext[0]);
@@ -227,14 +227,13 @@ static int dts_version; /* = 0 */
  */
 
 struct incl_file {
-	int filenum;
-	FILE *file;
+	struct dtc_file *file;
 	YY_BUFFER_STATE yy_prev_buf;
 	int yy_prev_lineno;
 	struct incl_file *prev;
 };
 
-struct incl_file *incl_file_stack;
+static struct incl_file *incl_file_stack;
 
 
 /*
@@ -245,36 +244,34 @@ struct incl_file *incl_file_stack;
 static int incl_depth = 0;
 
 
-int push_input_file(const char *filename)
+static void push_input_file(const char *filename)
 {
-	FILE *f;
 	struct incl_file *incl_file;
+	struct dtc_file *newfile;
+	struct search_path search, *searchptr = NULL;
 
-	if (!filename) {
-		yyerror("No include file name given.");
-		return 0;
-	}
+	assert(filename);
 
-	if (incl_depth++ >= MAX_INCLUDE_DEPTH) {
-		yyerror("Includes nested too deeply");
-		return 0;
+	if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+		die("Includes nested too deeply");
+
+	if (srcpos_file) {
+		search.dir = srcpos_file->dir;
+		search.next = NULL;
+		search.prev = NULL;
+		searchptr = &search;
 	}
 
-	f = dtc_open_file(filename);
+	newfile = dtc_open_file(filename, searchptr);
 
-	incl_file = malloc(sizeof(struct incl_file));
-	if (!incl_file) {
-		yyerror("Can not allocate include file space.");
-		return 0;
-	}
+	incl_file = xmalloc(sizeof(struct incl_file));
 
 	/*
 	 * Save current context.
 	 */
 	incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
 	incl_file->yy_prev_lineno = yylineno;
-	incl_file->filenum = srcpos_filenum;
-	incl_file->file = yyin;
+	incl_file->file = srcpos_file;
 	incl_file->prev = incl_file_stack;
 
 	incl_file_stack = incl_file;
@@ -282,23 +279,21 @@ int push_input_file(const char *filename)
 	/*
 	 * Establish new context.
 	 */
-	srcpos_filenum = lookup_file_name(filename, 0);
+	srcpos_file = newfile;
 	yylineno = 1;
-	yyin = f;
+	yyin = newfile->file;
 	yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
-
-	return 1;
 }
 
 
-int pop_input_file(void)
+static int pop_input_file(void)
 {
 	struct incl_file *incl_file;
 
 	if (incl_file_stack == 0)
 		return 0;
 
-	fclose(yyin);
+	dtc_close_file(srcpos_file);
 
 	/*
 	 * Pop.
@@ -313,16 +308,13 @@ int pop_input_file(void)
 	yy_delete_buffer(YY_CURRENT_BUFFER);
 	yy_switch_to_buffer(incl_file->yy_prev_buf);
 	yylineno = incl_file->yy_prev_lineno;
-	srcpos_filenum = incl_file->filenum;
-	yyin = incl_file->file;
+	srcpos_file = incl_file->file;
+	yyin = incl_file->file ? incl_file->file->file : NULL;
 
 	/*
 	 * Free old state.
 	 */
 	free(incl_file);
 
-	if (YY_CURRENT_BUFFER == 0)
-		return 0;
-
 	return 1;
 }

arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped

@@ -48,7 +48,8 @@
      DT_BYTE = 264,
      DT_STRING = 265,
      DT_LABEL = 266,
-     DT_REF = 267
+     DT_REF = 267,
+     DT_INCBIN = 268
    };
 #endif
 /* Tokens.  */
@@ -62,22 +63,23 @@
 #define DT_STRING 265
 #define DT_LABEL 266
 #define DT_REF 267
+#define DT_INCBIN 268
 
 
 
 
 #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
 typedef union YYSTYPE
-#line 34 "dtc-parser.y"
+#line 37 "dtc-parser.y"
 {
 	char *propnodename;
 	char *literal;
 	char *labelref;
 	unsigned int cbase;
-	u8 byte;
+	uint8_t byte;
 	struct data data;
 
-	u64 addr;
+	uint64_t addr;
 	cell_t cell;
 	struct property *prop;
 	struct property *proplist;
@@ -86,7 +88,7 @@ typedef union YYSTYPE
 	struct reserve_info *re;
 }
 /* Line 1489 of yacc.c.  */
-#line 90 "dtc-parser.tab.h"
+#line 92 "dtc-parser.tab.h"
 	YYSTYPE;
 # define yystype YYSTYPE /* obsolescent; will be withdrawn */
 # define YYSTYPE_IS_DECLARED 1

arch/powerpc/boot/dtc-src/dtc-parser.y

@@ -21,14 +21,17 @@
 %locations
 
 %{
+#include <stdio.h>
+
 #include "dtc.h"
 #include "srcpos.h"
 
-int yylex(void);
-unsigned long long eval_literal(const char *s, int base, int bits);
+extern int yylex(void);
 
 extern struct boot_info *the_boot_info;
+extern int treesource_error;
 
+static unsigned long long eval_literal(const char *s, int base, int bits);
 %}
 
 %union {
@@ -36,10 +39,10 @@ extern struct boot_info *the_boot_info;
 	char *literal;
 	char *labelref;
 	unsigned int cbase;
-	u8 byte;
+	uint8_t byte;
 	struct data data;
 
-	u64 addr;
+	uint64_t addr;
 	cell_t cell;
 	struct property *prop;
 	struct property *proplist;
@@ -58,6 +61,7 @@ extern struct boot_info *the_boot_info;
 %token <data> DT_STRING
 %token <labelref> DT_LABEL
 %token <labelref> DT_REF
+%token DT_INCBIN
 
 %type <data> propdata
 %type <data> propdataprefix
@@ -84,11 +88,11 @@ extern struct boot_info *the_boot_info;
 sourcefile:
 	  DT_V1 ';' memreserves devicetree
 		{
-			the_boot_info = build_boot_info($3, $4);
+			the_boot_info = build_boot_info($3, $4, 0);
 		}
 	| v0_memreserves devicetree
 		{
-			the_boot_info = build_boot_info($1, $2);
+			the_boot_info = build_boot_info($1, $2, 0);
 		}
 	;
 
@@ -196,6 +200,34 @@ propdata:
 		{
 			$$ = data_add_marker($1, REF_PATH, $2);
 		}
+	| propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
+		{
+			struct search_path path = { srcpos_file->dir, NULL, NULL };
+			struct dtc_file *file = dtc_open_file($4.val, &path);
+			struct data d = empty_data;
+
+			if ($6 != 0)
+				if (fseek(file->file, $6, SEEK_SET) != 0)
+					yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+						 (unsigned long long)$6,
+						 $4.val, strerror(errno));
+
+			d = data_copy_file(file->file, $8);
+
+			$$ = data_merge($1, d);
+			dtc_close_file(file);
+		}
+	| propdataprefix DT_INCBIN '(' DT_STRING ')'
+		{
+			struct search_path path = { srcpos_file->dir, NULL, NULL };
+			struct dtc_file *file = dtc_open_file($4.val, &path);
+			struct data d = empty_data;
+
+			d = data_copy_file(file->file, -1);
+
+			$$ = data_merge($1, d);
+			dtc_close_file(file);
+		}
 	| propdata DT_LABEL
 		{
 			$$ = data_add_marker($1, LABEL, $2);
@@ -282,7 +314,7 @@ subnodes:
 		}
 	| subnode propdef
 		{
-			yyerror("syntax error: properties must precede subnodes\n");
+			yyerror("syntax error: properties must precede subnodes");
 			YYERROR;
 		}
 	;
@@ -307,18 +339,29 @@ label:
 
 %%
 
-void yyerror (char const *s)
+void yyerrorf(char const *s, ...)
 {
-	const char *fname = srcpos_filename_for_num(yylloc.filenum);
+	const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+	va_list va;
+	va_start(va, s);
 
 	if (strcmp(fname, "-") == 0)
 		fname = "stdin";
 
-	fprintf(stderr, "%s:%d %s\n",
-		fname, yylloc.first_line, s);
+	fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+	vfprintf(stderr, s, va);
+	fprintf(stderr, "\n");
+
+	treesource_error = 1;
+	va_end(va);
+}
+
+void yyerror (char const *s)
+{
+	yyerrorf("%s", s);
 }
 
-unsigned long long eval_literal(const char *s, int base, int bits)
+static unsigned long long eval_literal(const char *s, int base, int bits)
 {
 	unsigned long long val;
 	char *e;

arch/powerpc/boot/dtc-src/dtc.c

@@ -55,7 +55,7 @@ char *join_path(const char *path, const char *name)
 	return str;
 }
 
-void fill_fullpaths(struct node *tree, const char *prefix)
+static void fill_fullpaths(struct node *tree, const char *prefix)
 {
 	struct node *child;
 	const char *unit;
@@ -106,7 +106,7 @@ static void  __attribute__ ((noreturn)) usage(void)
 	fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
 	fprintf(stderr, "\t-v\n");
 	fprintf(stderr, "\t\tPrint DTC version and exit\n");
-	exit(2);
+	exit(3);
 }
 
 int main(int argc, char *argv[])
@@ -118,10 +118,9 @@ int main(int argc, char *argv[])
 	int force = 0, check = 0;
 	const char *arg;
 	int opt;
-	FILE *inf = NULL;
 	FILE *outf = NULL;
 	int outversion = DEFAULT_FDT_VERSION;
-	int boot_cpuid_phys = 0xfeedbeef;
+	long long cmdline_boot_cpuid = -1;
 
 	quiet      = 0;
 	reservenum = 0;
@@ -161,11 +160,11 @@ int main(int argc, char *argv[])
 			quiet++;
 			break;
 		case 'b':
-			boot_cpuid_phys = strtol(optarg, NULL, 0);
+			cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
 			break;
 		case 'v':
-		    printf("Version: %s\n", DTC_VERSION);
-		    exit(0);
+			printf("Version: %s\n", DTC_VERSION);
+			exit(0);
 		case 'h':
 		default:
 			usage();
@@ -180,31 +179,27 @@ int main(int argc, char *argv[])
 		arg = argv[optind];
 
 	/* minsize and padsize are mutually exclusive */
-	if ((minsize) && (padsize)) {
+	if (minsize && padsize)
 		die("Can't set both -p and -S\n");
-	}
 
 	fprintf(stderr, "DTC: %s->%s  on file \"%s\"\n",
 		inform, outform, arg);
 
-	if (streq(inform, "dts")) {
+	if (streq(inform, "dts"))
 		bi = dt_from_source(arg);
-	} else if (streq(inform, "fs")) {
+	else if (streq(inform, "fs"))
 		bi = dt_from_fs(arg);
-	} else if(streq(inform, "dtb")) {
-		inf = dtc_open_file(arg);
-		bi = dt_from_blob(inf);
-	} else {
+	else if(streq(inform, "dtb"))
+		bi = dt_from_blob(arg);
+	else
 		die("Unknown input format \"%s\"\n", inform);
-	}
 
-	if (inf && (inf != stdin))
-		fclose(inf);
+	if (cmdline_boot_cpuid != -1)
+		bi->boot_cpuid_phys = cmdline_boot_cpuid;
 
-	if (! bi || ! bi->dt)
-		die("Couldn't read input tree\n");
+	fill_fullpaths(bi->dt, "");
+	process_checks(force, bi);
 
-	process_checks(force, bi, check, outversion, boot_cpuid_phys);
 
 	if (streq(outname, "-")) {
 		outf = stdout;
@@ -218,9 +213,9 @@ int main(int argc, char *argv[])
 	if (streq(outform, "dts")) {
 		dt_to_source(outf, bi);
 	} else if (streq(outform, "dtb")) {
-		dt_to_blob(outf, bi, outversion, boot_cpuid_phys);
+		dt_to_blob(outf, bi, outversion);
 	} else if (streq(outform, "asm")) {
-		dt_to_asm(outf, bi, outversion, boot_cpuid_phys);
+		dt_to_asm(outf, bi, outversion);
 	} else if (streq(outform, "null")) {
 		/* do nothing */
 	} else {

arch/powerpc/boot/dtc-src/dtc.h

@@ -30,10 +30,8 @@
 #include <ctype.h>
 #include <errno.h>
 #include <unistd.h>
-#include <netinet/in.h>
-#include <endian.h>
-#include <byteswap.h>
 
+#include <libfdt_env.h>
 #include <fdt.h>
 
 #define DEFAULT_FDT_VERSION	17
@@ -75,25 +73,8 @@ static inline void *xrealloc(void *p, size_t len)
 	return new;
 }
 
-typedef uint8_t u8;
-typedef uint16_t u16;
-typedef uint32_t u32;
-typedef uint64_t u64;
-typedef u32 cell_t;
+typedef uint32_t cell_t;
 
-#define cpu_to_be16(x)	htons(x)
-#define be16_to_cpu(x)	ntohs(x)
-
-#define cpu_to_be32(x)	htonl(x)
-#define be32_to_cpu(x)	ntohl(x)
-
-#if __BYTE_ORDER == __BIG_ENDIAN
-#define cpu_to_be64(x)	(x)
-#define be64_to_cpu(x)	(x)
-#else
-#define cpu_to_be64(x)	bswap_64(x)
-#define be64_to_cpu(x)	bswap_64(x)
-#endif
 
 #define streq(a, b)	(strcmp((a), (b)) == 0)
 #define strneq(a, b, n)	(strncmp((a), (b), (n)) == 0)
@@ -118,7 +99,6 @@ struct  marker {
 struct data {
 	int len;
 	char *val;
-	int asize;
 	struct marker *markers;
 };
 
@@ -145,7 +125,7 @@ struct data data_insert_at_marker(struct data d, struct marker *m,
 struct data data_merge(struct data d1, struct data d2);
 struct data data_append_cell(struct data d, cell_t word);
 struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
-struct data data_append_addr(struct data d, u64 addr);
+struct data data_append_addr(struct data d, uint64_t addr);
 struct data data_append_byte(struct data d, uint8_t byte);
 struct data data_append_zeroes(struct data d, int len);
 struct data data_append_align(struct data d, int align);
@@ -223,7 +203,7 @@ struct reserve_info {
 	char *label;
 };
 
-struct reserve_info *build_reserve_entry(u64 start, u64 len, char *label);
+struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label);
 struct reserve_info *chain_reserve_entry(struct reserve_info *first,
 					 struct reserve_info *list);
 struct reserve_info *add_reserve_entry(struct reserve_info *list,
@@ -233,24 +213,22 @@ struct reserve_info *add_reserve_entry(struct reserve_info *list,
 struct boot_info {
 	struct reserve_info *reservelist;
 	struct node *dt;		/* the device tree */
+	uint32_t boot_cpuid_phys;
 };
 
 struct boot_info *build_boot_info(struct reserve_info *reservelist,
-				  struct node *tree);
+				  struct node *tree, uint32_t boot_cpuid_phys);
 
 /* Checks */
 
-void process_checks(int force, struct boot_info *bi,
-		    int checkflag, int outversion, int boot_cpuid_phys);
+void process_checks(int force, struct boot_info *bi);
 
 /* Flattened trees */
 
-void dt_to_blob(FILE *f, struct boot_info *bi, int version,
-		int boot_cpuid_phys);
-void dt_to_asm(FILE *f, struct boot_info *bi, int version,
-	       int boot_cpuid_phys);
+void dt_to_blob(FILE *f, struct boot_info *bi, int version);
+void dt_to_asm(FILE *f, struct boot_info *bi, int version);
 
-struct boot_info *dt_from_blob(FILE *f);
+struct boot_info *dt_from_blob(const char *fname);
 
 /* Tree source */
 
@@ -264,6 +242,5 @@ struct boot_info *dt_from_fs(const char *dirname);
 /* misc */
 
 char *join_path(const char *path, const char *name);
-void fill_fullpaths(struct node *tree, const char *prefix);
 
 #endif /* _DTC_H */

arch/powerpc/boot/dtc-src/fstree.c

@@ -31,8 +31,8 @@ static struct node *read_fstree(const char *dirname)
 	struct node *tree;
 
 	d = opendir(dirname);
-	if (! d)
-		die("opendir(): %s\n", strerror(errno));
+	if (!d)
+		die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
 
 	tree = build_node(NULL, NULL);
 
@@ -87,8 +87,6 @@ struct boot_info *dt_from_fs(const char *dirname)
 	tree = read_fstree(dirname);
 	tree = name_node(tree, "", NULL);
 
-	fill_fullpaths(tree, "");
-
-	return build_boot_info(NULL, tree);
+	return build_boot_info(NULL, tree, 0);
 }
 

arch/powerpc/boot/dtc-src/libfdt_env.h

+#ifndef _LIBFDT_ENV_H
+#define _LIBFDT_ENV_H
+
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+#define _B(n)	((unsigned long long)((uint8_t *)&x)[n])
+static inline uint32_t fdt32_to_cpu(uint32_t x)
+{
+	return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3);
+}
+#define cpu_to_fdt32(x) fdt32_to_cpu(x)
+
+static inline uint64_t fdt64_to_cpu(uint64_t x)
+{
+	return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32)
+		| (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7);
+}
+#define cpu_to_fdt64(x) fdt64_to_cpu(x)
+#undef _B
+
+#endif /* _LIBFDT_ENV_H */

arch/powerpc/boot/dtc-src/livetree.c

@@ -115,6 +115,7 @@ void add_child(struct node *parent, struct node *child)
 	struct node **p;
 
 	child->next_sibling = NULL;
+	child->parent = parent;
 
 	p = &parent->children;
 	while (*p)
@@ -123,7 +124,8 @@ void add_child(struct node *parent, struct node *child)
 	*p = child;
 }
 
-struct reserve_info *build_reserve_entry(u64 address, u64 size, char *label)
+struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size,
+					 char *label)
 {
 	struct reserve_info *new = xmalloc(sizeof(*new));
 
@@ -165,13 +167,14 @@ struct reserve_info *add_reserve_entry(struct reserve_info *list,
 }
 
 struct boot_info *build_boot_info(struct reserve_info *reservelist,
-				  struct node *tree)
+				  struct node *tree, uint32_t boot_cpuid_phys)
 {
 	struct boot_info *bi;
 
 	bi = xmalloc(sizeof(*bi));
 	bi->reservelist = reservelist;
 	bi->dt = tree;
+	bi->boot_cpuid_phys = boot_cpuid_phys;
 
 	return bi;
 }
@@ -202,7 +205,7 @@ struct property *get_property(struct node *node, const char *propname)
 cell_t propval_cell(struct property *prop)
 {
 	assert(prop->val.len == sizeof(cell_t));
-	return be32_to_cpu(*((cell_t *)prop->val.val));
+	return fdt32_to_cpu(*((cell_t *)prop->val.val));
 }
 
 struct node *get_subnode(struct node *node, const char *nodename)

arch/powerpc/boot/dtc-src/srcpos.c

@@ -20,86 +20,97 @@
 #include "dtc.h"
 #include "srcpos.h"
 
-
-/*
- * Record the complete unique set of opened file names.
- * Primarily used to cache source position file names.
- */
-#define MAX_N_FILE_NAMES	(100)
-
-const char *file_names[MAX_N_FILE_NAMES];
-static int n_file_names = 0;
-
 /*
  * Like yylineno, this is the current open file pos.
  */
 
-int srcpos_filenum = -1;
-
+struct dtc_file *srcpos_file;
 
-
-FILE *dtc_open_file(const char *fname)
+static int dtc_open_one(struct dtc_file *file,
+                        const char *search,
+                        const char *fname)
 {
-	FILE *f;
+	char *fullname;
 
-	if (lookup_file_name(fname, 1) < 0)
-		die("Too many files opened\n");
+	if (search) {
+		fullname = xmalloc(strlen(search) + strlen(fname) + 2);
 
-	if (streq(fname, "-"))
-		f = stdin;
-	else
-		f = fopen(fname, "r");
+		strcpy(fullname, search);
+		strcat(fullname, "/");
+		strcat(fullname, fname);
+	} else {
+		fullname = strdup(fname);
+	}
 
-	if (! f)
-		die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
+	file->file = fopen(fullname, "r");
+	if (!file->file) {
+		free(fullname);
+		return 0;
+	}
 
-	return f;
+	file->name = fullname;
+	return 1;
 }
 
 
+struct dtc_file *dtc_open_file(const char *fname,
+                               const struct search_path *search)
+{
+	static const struct search_path default_search = { NULL, NULL, NULL };
 
-/*
- * Locate and optionally add filename fname in the file_names[] array.
- *
- * If the filename is currently not in the array and the boolean
- * add_it is non-zero, an attempt to add the filename will be made.
- *
- * Returns;
- *    Index [0..MAX_N_FILE_NAMES) where the filename is kept
- *    -1 if the name can not be recorded
- */
+	struct dtc_file *file;
+	const char *slash;
 
-int lookup_file_name(const char *fname, int add_it)
-{
-	int i;
+	file = xmalloc(sizeof(struct dtc_file));
 
-	for (i = 0; i < n_file_names; i++) {
-		if (strcmp(file_names[i], fname) == 0)
-			return i;
+	slash = strrchr(fname, '/');
+	if (slash) {
+		char *dir = xmalloc(slash - fname + 1);
+
+		memcpy(dir, fname, slash - fname);
+		dir[slash - fname] = 0;
+		file->dir = dir;
+	} else {
+		file->dir = NULL;
 	}
 
-	if (add_it) {
-		if (n_file_names < MAX_N_FILE_NAMES) {
-			file_names[n_file_names] = strdup(fname);
-			return n_file_names++;
-		}
+	if (streq(fname, "-")) {
+		file->name = "stdin";
+		file->file = stdin;
+		return file;
 	}
 
-	return -1;
-}
+	if (fname[0] == '/') {
+		file->file = fopen(fname, "r");
+		if (!file->file)
+			goto fail;
+
+		file->name = strdup(fname);
+		return file;
+	}
 
+	if (!search)
+		search = &default_search;
 
-const char *srcpos_filename_for_num(int filenum)
-{
-	if (0 <= filenum && filenum < n_file_names) {
-		return file_names[filenum];
+	while (search) {
+		if (dtc_open_one(file, search->dir, fname))
+			return file;
+
+		if (errno != ENOENT)
+			goto fail;
+
+		search = search->next;
 	}
 
-	return 0;
+fail:
+	die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
 }
 
-
-const char *srcpos_get_filename(void)
+void dtc_close_file(struct dtc_file *file)
 {
-	return srcpos_filename_for_num(srcpos_filenum);
+	if (fclose(file->file))
+		die("Error closing \"%s\": %s\n", file->name, strerror(errno));
+
+	free(file->dir);
+	free(file);
 }

arch/powerpc/boot/dtc-src/srcpos.h

@@ -22,13 +22,21 @@
  * array of all opened filenames.
  */
 
+#include <stdio.h>
+
+struct dtc_file {
+	char *dir;
+	const char *name;
+	FILE *file;
+};
+
 #if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
 typedef struct YYLTYPE {
     int first_line;
     int first_column;
     int last_line;
     int last_column;
-    int filenum;
+    struct dtc_file *file;
 } YYLTYPE;
 
 #define YYLTYPE_IS_DECLARED	1
@@ -48,7 +56,7 @@ typedef struct YYLTYPE {
 	  (Current).first_column = YYRHSLOC (Rhs, 1).first_column;	\
 	  (Current).last_line    = YYRHSLOC (Rhs, N).last_line;		\
 	  (Current).last_column  = YYRHSLOC (Rhs, N).last_column;	\
-	  (Current).filenum      = YYRHSLOC (Rhs, N).filenum;		\
+	  (Current).file         = YYRHSLOC (Rhs, N).file;		\
 	}								\
       else								\
 	{								\
@@ -56,20 +64,22 @@ typedef struct YYLTYPE {
 	    YYRHSLOC (Rhs, 0).last_line;				\
 	  (Current).first_column = (Current).last_column =		\
 	    YYRHSLOC (Rhs, 0).last_column;				\
-	  (Current).filenum      = YYRHSLOC (Rhs, 0).filenum;		\
+	  (Current).file         = YYRHSLOC (Rhs, 0).file;		\
 	}								\
     while (YYID (0))
 
 
 
 extern void yyerror(char const *);
+extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2)));
 
-extern int srcpos_filenum;
+extern struct dtc_file *srcpos_file;
 
-extern int push_input_file(const char *filename);
-extern int pop_input_file(void);
+struct search_path {
+	const char *dir; /* NULL for current directory */
+	struct search_path *prev, *next;
+};
 
-extern FILE *dtc_open_file(const char *fname);
-extern int lookup_file_name(const char *fname, int add_it);
-extern const char *srcpos_filename_for_num(int filenum);
-const char *srcpos_get_filename(void);
+extern struct dtc_file *dtc_open_file(const char *fname,
+                                      const struct search_path *search);
+extern void dtc_close_file(struct dtc_file *file);

arch/powerpc/boot/dtc-src/treesource.c

@@ -23,20 +23,23 @@
 
 extern FILE *yyin;
 extern int yyparse(void);
-extern void yyerror(char const *);
 
 struct boot_info *the_boot_info;
+int treesource_error;
 
 struct boot_info *dt_from_source(const char *fname)
 {
 	the_boot_info = NULL;
+	treesource_error = 0;
 
-	push_input_file(fname);
+	srcpos_file = dtc_open_file(fname, NULL);
+	yyin = srcpos_file->file;
 
 	if (yyparse() != 0)
-		return NULL;
+		die("Unable to parse input tree\n");
 
-	fill_fullpaths(the_boot_info->dt, "");
+	if (treesource_error)
+		die("Syntax error parsing input tree\n");
 
 	return the_boot_info;
 }
@@ -144,7 +147,7 @@ static void write_propval_cells(FILE *f, struct data val)
 			m = m->next;
 		}
 
-		fprintf(f, "0x%x", be32_to_cpu(*cp++));
+		fprintf(f, "0x%x", fdt32_to_cpu(*cp++));
 		if ((void *)cp >= propend)
 			break;
 		fprintf(f, " ");
@@ -173,7 +176,7 @@ static void write_propval_bytes(FILE *f, struct data val)
 		}
 
 		fprintf(f, "%02hhx", *bp++);
-		if ((void *)bp >= propend)
+		if ((const void *)bp >= propend)
 			break;
 		fprintf(f, " ");
 	}

arch/powerpc/boot/dtc-src/version_gen.h

-#define DTC_VERSION "DTC 1.0.0-gd6f9b62f"
+#define DTC_VERSION "DTC 1.2.0"

arch/powerpc/boot/dts/arches.dts

+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ *   Stefan Roese <sr@denx.de>
+ *   Copyright 2008 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,arches";
+	compatible = "amcc,arches";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <3>;
+			num-rx-chans = <24>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0xffffffff>;
+				gpcs-address = <0x0000000a>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000000>;
+				gpcs-address = <0x0000000b>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000001>;
+				gpcs-address = <0x0000000C>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+};

arch/powerpc/boot/dts/asp834x-redboot.dts

@@ -130,24 +130,28 @@ dma@82a8 {
 			dma-channel@0 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};

arch/powerpc/boot/dts/gef_sbc610.dts

+/*
+ * GE Fanuc SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/dts-v1/;
+
+/ {
+	model = "GEF_SBC610";
+	compatible = "gef,sbc610";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	localbus@fef05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8641-localbus", "simple-bus";
+		reg = <0xf8005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
+			  1 0 0xe8000000 0x08000000     // Paged Flash 0
+			  2 0 0xe0000000 0x08000000     // Paged Flash 1
+			  3 0 0xfc100000 0x00020000     // NVRAM
+			  4 0 0xfc000000 0x00008000     // FPGA
+			  5 0 0xfc008000 0x00008000     // AFIX FPGA
+			  6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8
+				      0x9>;
+			interrupt-parent = <&mpic>;
+
+		};
+	};
+
+	soc@fef00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xfef00000 0x00100000>;
+		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c1: i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		i2c2: i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+					   "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		enet1: ethernet@26000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <0x2a 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <0x1c 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8641-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfef08000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <0x18 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+		>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+};

arch/powerpc/boot/dts/glacier.dts

@@ -14,7 +14,7 @@ / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,glacier";
-	compatible = "amcc,glacier", "amcc,canyonlands";
+	compatible = "amcc,glacier";
 	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {

arch/powerpc/boot/dts/mgcoge.dts

+/*
+ * Device Tree for the MGCOGE plattform from keymile
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "MGCOGE";
+	compatible = "keymile,mgcoge";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &smc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8247@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			bus-frequency = <0>; /* Filled in by U-Boot */
+		};
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8247-localbus",
+		             "fsl,pq2-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0 0 0xfe000000 0x00400000
+			  5 0 0x50000000 0x20000000
+			>; /* Filled in by U-Boot */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x40000>;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x40000 0x20000>;
+			};
+			partition@60000 {
+				label = "kernel";
+				reg = <0x60000 0x220000>;
+			};
+			partition@280000 {
+				label = "dtb";
+				reg = <0x280000 0x20000>;
+			};
+		};
+
+		flash@5,0 {
+			compatible = "cfi-flash";
+			reg = <5 0x0 0x2000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			device-width = <2>;
+			partition@0 {
+				label = "ramdisk";
+				reg = <0 0x7a0000>;
+			};
+			partition@7a0000 {
+				label = "user";
+				reg = <0x7a0000 0x1860000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>; /* Filled in by U-Boot */
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x00053000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8247-cpm", "fsl,cpm2",
+					"simple-bus";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram {
+				compatible = "fsl,cpm-muram";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x80 0x1f80 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8247-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			/* Monitor port/SMC2 */
+			smc2: serial@11a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc8247-smc-uart",
+				             "fsl,cpm2-smc-uart";
+				reg = <0x11a90 0x20 0x88fc 0x02>;
+				interrupts = <5 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x21200000>;
+				current-speed = <0>; /* Filled in by U-Boot */
+			};
+
+			eth0: ethernet@11a60 {
+				device_type = "network";
+				compatible = "fsl,mpc8247-scc-enet",
+				             "fsl,cpm2-scc-enet";
+				reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+				interrupts = <43 8>;
+				interrupt-parent = <&PIC>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0xce00000>;
+				fixed-link = <0 0 10 0 0>;
+			};
+
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8247-pic", "fsl,pq2-pic";
+		};
+	};
+};

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -403,7 +403,8 @@ pci: pci@80008500 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0x80008500 0x100>;
+		reg = <0x80008500 0x100		/* internal registers */
+		       0x80008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc5121-pci";
 		device_type = "pci";
 	};

arch/powerpc/boot/dts/mpc8313erdb.dts

@@ -176,24 +176,28 @@ dma@82a8 {
 			dma-channel@0 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -359,7 +363,8 @@ pci0: pci@e0008500 {
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <0xe0008500 0x100>;
+			reg = <0xe0008500 0x100		/* internal registers */
+			       0xe0008300 0x8>;		/* config space access registers */
 			compatible = "fsl,mpc8349-pci";
 			device_type = "pci";
 		};

arch/powerpc/boot/dts/mpc8315erdb.dts

@@ -144,24 +144,28 @@ dma@82a8 {
 			dma-channel@0 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0 0x80>;
+				cell-index = <0>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x80 0x80>;
+				cell-index = <1>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x100 0x80>;
+				cell-index = <2>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
 				reg = <0x180 0x28>;
+				cell-index = <3>;
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
@@ -314,7 +318,8 @@ pci0: pci@e0008500 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};

arch/powerpc/boot/dts/mpc8536ds.dts

@@ -91,6 +91,8 @@ i2c@3100 {
 			rtc@68 {
 				compatible = "dallas,ds3232";
 				reg = <0x68>;
+				interrupts = <0 0x1>;
+				interrupt-parent = <&mpic>;
 			};
 		};
 

arch/powerpc/boot/dts/yosemite.dts

@@ -15,7 +15,7 @@ / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,yosemite";
-	compatible = "amcc,yosemite","amcc,bamboo";
+	compatible = "amcc,yosemite";
 	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {