Skip to content

L
linux
Commit 5f540fb4 authored by Brian Masney's avatar Brian Masney Committed by Linus Walleij
Browse files
Options

ARM: dts: qcom: pm8941: add interrupt controller properties 

Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it. Code was tested on the LG Nexus 5 (hammerhead) phone.
Signed-off-by: default avatarBrian Masney <masneyb@onstation.org>
Reviewed-by: default avatarStephen Boyd <sboyd@kernel.org>
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent ca69e2d1
Show whitespace changes
Inline Side-by-side
Showing with 2 additions and 36 deletions
arch/arm/boot/dts/qcom-pm8941.dtsi
View file @ 5f540fb4
...@@ -64,42 +64,8 @@ pm8941_gpios: gpios@c000 { ...@@ -64,42 +64,8 @@ pm8941_gpios: gpios@c000 {
reg = <0xc000>; reg = <0xc000>;
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, interrupt-controller;
<0 0xc1 0 IRQ_TYPE_NONE>, #interrupt-cells = <2>;
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>,
<0 0xc4 0 IRQ_TYPE_NONE>,
<0 0xc5 0 IRQ_TYPE_NONE>,
<0 0xc6 0 IRQ_TYPE_NONE>,
<0 0xc7 0 IRQ_TYPE_NONE>,
<0 0xc8 0 IRQ_TYPE_NONE>,
<0 0xc9 0 IRQ_TYPE_NONE>,
<0 0xca 0 IRQ_TYPE_NONE>,
<0 0xcb 0 IRQ_TYPE_NONE>,
<0 0xcc 0 IRQ_TYPE_NONE>,
<0 0xcd 0 IRQ_TYPE_NONE>,
<0 0xce 0 IRQ_TYPE_NONE>,
<0 0xcf 0 IRQ_TYPE_NONE>,
<0 0xd0 0 IRQ_TYPE_NONE>,
<0 0xd1 0 IRQ_TYPE_NONE>,
<0 0xd2 0 IRQ_TYPE_NONE>,
<0 0xd3 0 IRQ_TYPE_NONE>,
<0 0xd4 0 IRQ_TYPE_NONE>,
<0 0xd5 0 IRQ_TYPE_NONE>,
<0 0xd6 0 IRQ_TYPE_NONE>,
<0 0xd7 0 IRQ_TYPE_NONE>,
<0 0xd8 0 IRQ_TYPE_NONE>,
<0 0xd9 0 IRQ_TYPE_NONE>,
<0 0xda 0 IRQ_TYPE_NONE>,
<0 0xdb 0 IRQ_TYPE_NONE>,
<0 0xdc 0 IRQ_TYPE_NONE>,
<0 0xdd 0 IRQ_TYPE_NONE>,
<0 0xde 0 IRQ_TYPE_NONE>,
<0 0xdf 0 IRQ_TYPE_NONE>,
<0 0xe0 0 IRQ_TYPE_NONE>,
<0 0xe1 0 IRQ_TYPE_NONE>,
<0 0xe2 0 IRQ_TYPE_NONE>,
<0 0xe3 0 IRQ_TYPE_NONE>;
boost_bypass_n_pin: boost-bypass { boost_bypass_n_pin: boost-bypass {
pins = "gpio21"; pins = "gpio21";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7