Commit 66e9fe1e authored by Geert Uytterhoeven's avatar Geert Uytterhoeven

pinctrl: sh-pfc: r8a7790: Add missing TX_ER pin to avb_mii group

The pin controller drivers for all R-Car Gen2 SoCs have entries for the
EtherAVB TX_ER pins in their EtherAVB MII groups, except on R-Car H2.

Add the missing pin to restore consistency.

Note that technically TX_ER is an optional signal in the MII bus, and
thus could have its own group, but this is currently not supported by
any R-Car Gen2 pin controller driver.

Fixes: 19ef697d ("sh-pfc: r8a7790: add EtherAVB pin groups")
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent b3cbd8a5
...@@ -1835,8 +1835,8 @@ static const unsigned int avb_mii_pins[] = { ...@@ -1835,8 +1835,8 @@ static const unsigned int avb_mii_pins[] = {
RCAR_GP_PIN(2, 2), RCAR_GP_PIN(2, 2),
RCAR_GP_PIN(2, 7), RCAR_GP_PIN(2, 8), RCAR_GP_PIN(2, 9), RCAR_GP_PIN(2, 7), RCAR_GP_PIN(2, 8), RCAR_GP_PIN(2, 9),
RCAR_GP_PIN(2, 10), RCAR_GP_PIN(3, 8), RCAR_GP_PIN(3, 10), RCAR_GP_PIN(2, 10), RCAR_GP_PIN(3, 8), RCAR_GP_PIN(3, 9),
RCAR_GP_PIN(3, 12), RCAR_GP_PIN(3, 10), RCAR_GP_PIN(3, 12),
}; };
static const unsigned int avb_mii_mux[] = { static const unsigned int avb_mii_mux[] = {
AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK, AVB_TXD0_MARK, AVB_TXD1_MARK, AVB_TXD2_MARK,
...@@ -1846,8 +1846,8 @@ static const unsigned int avb_mii_mux[] = { ...@@ -1846,8 +1846,8 @@ static const unsigned int avb_mii_mux[] = {
AVB_RXD3_MARK, AVB_RXD3_MARK,
AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK, AVB_RX_ER_MARK, AVB_RX_CLK_MARK, AVB_RX_DV_MARK,
AVB_CRS_MARK, AVB_TX_EN_MARK, AVB_TX_CLK_MARK, AVB_CRS_MARK, AVB_TX_EN_MARK, AVB_TX_ER_MARK,
AVB_COL_MARK, AVB_TX_CLK_MARK, AVB_COL_MARK,
}; };
static const unsigned int avb_gmii_pins[] = { static const unsigned int avb_gmii_pins[] = {
RCAR_GP_PIN(0, 8), RCAR_GP_PIN(0, 9), RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 8), RCAR_GP_PIN(0, 9), RCAR_GP_PIN(0, 10),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment