ASoC: dt-bindings: Convert maxim,max98925 to DT schema

Convert the Maxim Integrated MAX98925/MAX98926/MAX98927 speaker
amplifier bindings to DT schema format.  Changes during conversion:
1. Add "sound-dai-cells", already used by DTS.
2. Use "maxim,interleave-mode" instead previous "interleave-mode" and
   undocumented but used interleave_mode.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/sound/max9892x.txt

-Maxim Integrated MAX98925/MAX98926/MAX98927 Speaker Amplifier
-
-This device supports I2C.
-
-Required properties:
-
-  - compatible : should be one of the following
-    - "maxim,max98925"
-    - "maxim,max98926"
-    - "maxim,max98927"
-
-  - vmon-slot-no : slot number used to send voltage information
-                   or in inteleave mode this will be used as
-                   interleave slot.
-                   MAX98925/MAX98926 slot range : 0 ~ 30,  Default : 0
-                   MAX98927 slot range : 0 ~ 15,  Default : 0
-
-  - imon-slot-no : slot number used to send current information
-                   MAX98925/MAX98926 slot range : 0 ~ 30,  Default : 0
-                   MAX98927 slot range : 0 ~ 15,  Default : 0
-
-  - interleave-mode : When using two MAX9892X in a system it is
-                   possible to create ADC data that that will
-                   overflow the frame size. Digital Audio Interleave
-                   mode provides a means to output VMON and IMON data
-                   from two devices on a single DOUT line when running
-                   smaller frames sizes such as 32 BCLKS per LRCLK or
-                   48 BCLKS per LRCLK.
-                   Range : 0 (off), 1 (on),  Default : 0
-
-  - reg : the I2C address of the device for I2C
-
-Optional properties:
-  - reset-gpios : GPIO to reset the device
-
-Example:
-
-codec: max98927@3a {
-   compatible = "maxim,max98927";
-   vmon-slot-no = <0>;
-   imon-slot-no = <1>;
-   interleave-mode = <0>;
-   reg = <0x3a>;
-};

Documentation/devicetree/bindings/sound/maxim,max98925.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@maximintegrated.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98925
+      - maxim,max98926
+      - maxim,max98927
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 30
+    default: 0
+    description:
+      Slot number used to send voltage information or in inteleave mode this
+      will be used as interleave slot.
+
+  imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 30
+    default: 0
+    description:
+      Slot number used to send current information.
+
+  maxim,interleave-mode:
+    type: boolean
+    description:
+      When using two MAX9892X in a system it is possible to create ADC data
+      that will overflow the frame size. When enabled, the Digital Audio
+      Interleave mode provides a means to output VMON and IMON data from two
+      devices on a single DOUT line when running smaller frames sizes such as
+      32 BCLKS per LRCLK or 48 BCLKS per LRCLK.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max98927
+    then:
+      properties:
+        vmon-slot-no:
+          minimum: 0
+          maximum: 15
+
+        imon-slot-no:
+          minimum: 0
+          maximum: 15
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        #include <dt-bindings/gpio/gpio.h>
+        audio-codec@3a {
+            compatible = "maxim,max98927";
+            reg = <0x3a>;
+            #sound-dai-cells = <0>;
+
+            pinctrl-0 = <&speaker_default>;
+            pinctrl-names = "default";
+
+            reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+
+            vmon-slot-no = <1>;
+            imon-slot-no = <0>;
+        };
+    };