Merge tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late OMAP changes from Olof Johansson:
 "This branch contains changes for OMAP that came in late during the
  release staging, close to when the merge window opened.

  It contains, among other things:

   - OMAP PM fixes and some patches for audio device integration
   - OMAP clock fixes related to common clock conversion
   - A set of patches cleaning up WFI entry and blocking.
   - A set of fixes and IP block support for PM on TI AM33xx SoCs
     (Beaglebone, etc)
   - A set of smaller fixes and cleanups around AM33xx restart and
     revision detection, as well as removal of some dead code
     (CONFIG_32K_TIMER_HZ)"

* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: omap2: include linux/errno.h in hwmod_reset
  ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
  ARM: OMAP4: hwmod data: Enable AESS hwmod device
  ARM: OMAP4: hwmod data: Update AESS data with memory bank area
  ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
  ASoC: TI AESS: add autogating-enable function, callable from architecture code
  ARM: OMAP2+: hwmod: add enable_preprogram hook
  ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
  ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
  ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
  ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
  ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
  ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
  ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
  ARM: OMAP2+: AM33XX: Update the hardreset API
  ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
  ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
  ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
  ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
  ...

arch/arm/Kconfig

@@ -1676,7 +1676,6 @@ config HZ
 	int
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
-	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
 	default 100

arch/arm/boot/dts/am33xx.dtsi

@@ -385,5 +385,19 @@ cpsw_emac1: slave@4a100300 {
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
 		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "ti,am3352-ocmcram";
+			reg = <0x40300000 0x10000>;
+			ti,hwmods = "ocmcram";
+			ti,no_idle_on_suspend;
+		};
+
+		wkup_m3: wkup_m3@44d00000 {
+			compatible = "ti,am3353-wkup-m3";
+			reg = <0x44d00000 0x4000	/* M3 UMEM */
+			       0x44d80000 0x2000>;	/* M3 DMEM */
+			ti,hwmods = "wkup_m3";
+		};
 	};
 };

arch/arm/mach-omap2/Makefile

@@ -11,7 +11,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
 	 omap_device.o sram.o
 
 omap-2-3-common				= irq.o
-hwmod-common				= omap_hwmod.o \
+hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
 					  clkt_dpll.o clkt_clksel.o
@@ -56,6 +56,7 @@ AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 # Restart code (OMAP4/5 currently in omap4-common.c)
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
 obj-$(CONFIG_SOC_OMAP2430)		+= omap2-restart.o
+obj-$(CONFIG_SOC_AM33XX)		+= am33xx-restart.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o
 
 # Pin multiplexing

arch/arm/mach-omap2/am33xx-restart.c

+/*
+ * am33xx-restart.c - Code common to all AM33xx machines.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+
+#include "common.h"
+#include "prm-regbits-33xx.h"
+#include "prm33xx.h"
+
+/**
+ * am3xx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC.  For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c.  No return value.
+ */
+void am33xx_restart(char mode, const char *cmd)
+{
+	/* TODO: Handle mode and cmd if necessary */
+
+	am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK,
+				AM33XX_GLOBAL_WARM_SW_RST_MASK,
+				AM33XX_PRM_DEVICE_MOD,
+				AM33XX_PRM_RSTCTRL_OFFSET);
+
+	/* OCP barrier */
+	(void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
+				  AM33XX_PRM_RSTCTRL_OFFSET);
+}

arch/arm/mach-omap2/am35xx-emac.c

@@ -62,8 +62,7 @@ static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh,
 {
 	struct platform_device *pdev;
 
-	pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len,
-				 false);
+	pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len);
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n",
 		     oh->class->name, oh->name);

arch/arm/mach-omap2/board-generic.c

@@ -140,6 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.init_time	= omap3_am33xx_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
+	.restart	= am33xx_restart,
 MACHINE_END
 #endif
 

arch/arm/mach-omap2/cclock33xx_data.c

@@ -284,9 +284,10 @@ DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
  * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
  * and ALT_CLK1/2)
  */
-DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck, 0x0,
-		   AM33XX_CM_DIV_M2_DPLL_DISP, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
-		   AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
+DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck,
+		   CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP,
+		   AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
+		   CLK_DIVIDER_ONE_BASED, NULL);
 
 /* DPLL_PER */
 static struct dpll_data dpll_per_dd = {
@@ -723,7 +724,8 @@ static struct clk_hw_omap lcd_gclk_hw = {
 	.clksel_mask	= AM33XX_CLKSEL_0_1_MASK,
 };
 
-DEFINE_STRUCT_CLK(lcd_gclk, lcd_ck_parents, gpio_fck_ops);
+DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents,
+			gpio_fck_ops, CLK_SET_RATE_PARENT);
 
 DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2);
 

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -426,6 +426,7 @@ static struct clk dpll4_m5x2_ck_3630 = {
 	.parent_names	= dpll4_m5x2_ck_parent_names,
 	.num_parents	= ARRAY_SIZE(dpll4_m5x2_ck_parent_names),
 	.ops		= &dpll4_m5x2_ck_3630_ops,
+	.flags		= CLK_SET_RATE_PARENT,
 };
 
 static struct clk cam_mclk;
@@ -443,7 +444,14 @@ static struct clk_hw_omap cam_mclk_hw = {
 	.clkdm_name	= "cam_clkdm",
 };
 
-DEFINE_STRUCT_CLK(cam_mclk, cam_mclk_parent_names, aes2_ick_ops);
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.hw		= &cam_mclk_hw.hw,
+	.parent_names	= cam_mclk_parent_names,
+	.num_parents	= ARRAY_SIZE(cam_mclk_parent_names),
+	.ops		= &aes2_ick_ops,
+	.flags		= CLK_SET_RATE_PARENT,
+};
 
 static const struct clksel_rate clkout2_src_core_rates[] = {
 	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },

arch/arm/mach-omap2/cclock44xx_data.c

@@ -605,15 +605,26 @@ static const char *dpll_usb_ck_parents[] = {
 
 static struct clk dpll_usb_ck;
 
+static const struct clk_ops dpll_usb_ck_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+	.recalc_rate	= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.get_parent	= &omap2_init_dpll_parent,
+	.init		= &omap2_init_clk_clkdm,
+};
+
 static struct clk_hw_omap dpll_usb_ck_hw = {
 	.hw = {
 		.clk = &dpll_usb_ck,
 	},
 	.dpll_data	= &dpll_usb_dd,
+	.clkdm_name	= "l3_init_clkdm",
 	.ops		= &clkhwops_omap3_dpll,
 };
 
-DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops);
+DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_usb_ck_ops);
 
 static const char *dpll_usb_clkdcoldo_ck_parents[] = {
 	"dpll_usb_ck",

arch/arm/mach-omap2/clock.h

@@ -65,6 +65,17 @@ struct clockdomain;
 		.ops = &_clkops_name,				\
 	};
 
+#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name,	\
+				_clkops_name, _flags)		\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _parent_array_name,		\
+		.num_parents = ARRAY_SIZE(_parent_array_name),	\
+		.ops = &_clkops_name,				\
+		.flags = _flags,				\
+	};
+
 #define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name)		\
 	static struct clk_hw_omap _name##_hw = {		\
 		.hw = {						\

arch/arm/mach-omap2/cm33xx.c

@@ -241,9 +241,6 @@ int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 

arch/arm/mach-omap2/cm33xx.h

@@ -17,16 +17,11 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_33XX_H
 
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
 #include "common.h"
 
 #include "cm.h"
 #include "cm-regbits-33xx.h"
-#include "cm33xx.h"
+#include "iomap.h"
 
 /* CM base address */
 #define AM33XX_CM_BASE		0x44e00000
@@ -381,6 +376,7 @@
 #define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020)
 
 
+#ifndef __ASSEMBLER__
 extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
 extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
 extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
@@ -417,4 +413,5 @@ static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
 }
 #endif
 
+#endif /* ASSEMBLER */
 #endif

arch/arm/mach-omap2/common.h

@@ -119,6 +119,14 @@ static inline void omap2xxx_restart(char mode, const char *cmd)
 }
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+void am33xx_restart(char mode, const char *cmd);
+#else
+static inline void am33xx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP3
 void omap3xxx_restart(char mode, const char *cmd);
 #else

arch/arm/mach-omap2/devices.c

@@ -426,7 +426,7 @@ static void __init omap_init_hdmi_audio(void)
 		return;
 	}
 
-	pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0, 0);
+	pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
 	WARN(IS_ERR(pdev),
 	     "Can't build omap_device for omap-hdmi-audio-dai.\n");
 

arch/arm/mach-omap2/dpll3xxx.c

@@ -500,8 +500,9 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;
 
-		/* No freqsel on OMAP4 and OMAP3630 */
-		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+		/* No freqsel on AM335x, OMAP4 and OMAP3630 */
+		if (!soc_is_am33xx() && !cpu_is_omap44xx() &&
+		    !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			WARN_ON(!freqsel);

arch/arm/mach-omap2/id.c

@@ -399,9 +399,19 @@ void __init omap3xxx_check_revision(void)
 		}
 		break;
 	case 0xb944:
+		switch (rev) {
+		case 0:
 			omap_revision = AM335X_REV_ES1_0;
 			cpu_rev = "1.0";
 			break;
+		case 1:
+		/* FALLTHROUGH */
+		default:
+			omap_revision = AM335X_REV_ES2_0;
+			cpu_rev = "2.0";
+			break;
+		}
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/omap_hwmod.c

@@ -2054,6 +2054,23 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
 	return oh->prcm.omap4.context_lost_counter;
 }
 
+/**
+ * _enable_preprogram - Pre-program an IP block during the _enable() process
+ * @oh: struct omap_hwmod *
+ *
+ * Some IP blocks (such as AESS) require some additional programming
+ * after enable before they can enter idle.  If a function pointer to
+ * do so is present in the hwmod data, then call it and pass along the
+ * return value; otherwise, return 0.
+ */
+static int __init _enable_preprogram(struct omap_hwmod *oh)
+{
+	if (!oh->class->enable_preprogram)
+		return 0;
+
+	return oh->class->enable_preprogram(oh);
+}
+
 /**
  * _enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
@@ -2160,6 +2177,7 @@ static int _enable(struct omap_hwmod *oh)
 				_update_sysc_cache(oh);
 			_enable_sysc(oh);
 		}
+		r = _enable_preprogram(oh);
 	} else {
 		if (soc_ops.disable_module)
 			soc_ops.disable_module(oh);
@@ -3049,11 +3067,8 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
 static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
 				     struct omap_hwmod_rst_info *ohri)
 {
-	if (ohri->st_shift)
-		pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
-		       oh->name, ohri->name);
-
 	return am33xx_prm_deassert_hardreset(ohri->rst_shift,
+				ohri->st_shift,
 				oh->clkdm->pwrdm.ptr->prcm_offs,
 				oh->prcm.omap4.rstctrl_offs,
 				oh->prcm.omap4.rstst_offs);

arch/arm/mach-omap2/omap_hwmod.h

@@ -510,6 +510,7 @@ struct omap_hwmod_omap4_prcm {
  * @rev: revision of the IP class
  * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
  * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
+ * @enable_preprogram:  ptr to fn to be executed during device enable
  *
  * Represent the class of a OMAP hardware "modules" (e.g. timer,
  * smartreflex, gpio, uart...)
@@ -533,6 +534,7 @@ struct omap_hwmod_class {
 	u32					rev;
 	int					(*pre_shutdown)(struct omap_hwmod *oh);
 	int					(*reset)(struct omap_hwmod *oh);
+	int					(*enable_preprogram)(struct omap_hwmod *oh);
 };
 
 /**
@@ -679,6 +681,12 @@ extern void __init omap_hwmod_init(void);
 
 const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
 
+/*
+ *
+ */
+
+extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -3493,7 +3493,12 @@ static struct omap_hwmod am35xx_emac_hwmod = {
 	.name		= "davinci_emac",
 	.mpu_irqs	= am35xx_emac_mpu_irqs,
 	.class		= &am35xx_emac_class,
-	.flags		= HWMOD_NO_IDLEST,
+	/*
+	 * According to Mark Greer, the MPU will not return from WFI
+	 * when the EMAC signals an interrupt.
+	 * http://www.spinics.net/lists/arm-kernel/msg174734.html
+	 */
+	.flags		= (HWMOD_NO_IDLEST | HWMOD_BLOCK_WFI),
 };
 
 /* l3_core -> davinci emac interface */

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -322,6 +322,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = {
 static struct omap_hwmod_class omap44xx_aess_hwmod_class = {
 	.name	= "aess",
 	.sysc	= &omap44xx_aess_sysc,
+	.enable_preprogram = omap_hwmod_aess_preprogram,
 };
 
 /* aess */
@@ -348,7 +349,7 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
 	.clkdm_name	= "abe_clkdm",
 	.mpu_irqs	= omap44xx_aess_irqs,
 	.sdma_reqs	= omap44xx_aess_sdma_reqs,
-	.main_clk	= "aess_fck",
+	.main_clk	= "aess_fclk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
@@ -4241,6 +4242,27 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = {
 
 static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
 	{
+		.name		= "dmem",
+		.pa_start	= 0x40180000,
+		.pa_end		= 0x4018ffff
+	},
+	{
+		.name		= "cmem",
+		.pa_start	= 0x401a0000,
+		.pa_end		= 0x401a1fff
+	},
+	{
+		.name		= "smem",
+		.pa_start	= 0x401c0000,
+		.pa_end		= 0x401c5fff
+	},
+	{
+		.name		= "pmem",
+		.pa_start	= 0x401e0000,
+		.pa_end		= 0x401e1fff
+	},
+	{
+		.name		= "mpu",
 		.pa_start	= 0x401f1000,
 		.pa_end		= 0x401f13ff,
 		.flags		= ADDR_TYPE_RT
@@ -4259,6 +4281,27 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
 
 static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
 	{
+		.name		= "dmem_dma",
+		.pa_start	= 0x49080000,
+		.pa_end		= 0x4908ffff
+	},
+	{
+		.name		= "cmem_dma",
+		.pa_start	= 0x490a0000,
+		.pa_end		= 0x490a1fff
+	},
+	{
+		.name		= "smem_dma",
+		.pa_start	= 0x490c0000,
+		.pa_end		= 0x490c5fff
+	},
+	{
+		.name		= "pmem_dma",
+		.pa_start	= 0x490e0000,
+		.pa_end		= 0x490e1fff
+	},
+	{
+		.name		= "dma",
 		.pa_start	= 0x490f1000,
 		.pa_end		= 0x490f13ff,
 		.flags		= ADDR_TYPE_RT
@@ -6268,7 +6311,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
-	/* &omap44xx_aess__l4_abe, */
+	&omap44xx_aess__l4_abe,
 	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
@@ -6277,8 +6320,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__l4_wkup,
 	&omap44xx_mpu__mpu_private,
 	&omap44xx_l4_cfg__ocp_wp_noc,
-	/* &omap44xx_l4_abe__aess, */
-	/* &omap44xx_l4_abe__aess_dma, */
+	&omap44xx_l4_abe__aess,
+	&omap44xx_l4_abe__aess_dma,
 	&omap44xx_l3_main_2__c2c,
 	&omap44xx_l4_wkup__counter_32k,
 	&omap44xx_l4_cfg__ctrl_module_core,

arch/arm/mach-omap2/omap_hwmod_reset.c

+/*
+ * OMAP IP block custom reset and preprogramming stubs
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * A small number of IP blocks need custom reset and preprogramming
+ * functions.  The stubs in this file provide a standard way for the
+ * hwmod code to call these functions, which are to be located under
+ * drivers/.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#include <sound/aess.h>
+
+#include "omap_hwmod.h"
+
+/**
+ * omap_hwmod_aess_preprogram - enable AESS internal autogating
+ * @oh: struct omap_hwmod *
+ *
+ * The AESS will not IdleAck to the PRCM until its internal autogating
+ * is enabled.  Since internal autogating is disabled by default after
+ * AESS reset, we must enable autogating after the hwmod code resets
+ * the AESS.  Returns 0.
+ */
+int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
+{
+	void __iomem *va;
+
+	va = omap_hwmod_get_mpu_rt_va(oh);
+	if (!va)
+		return -EINVAL;
+
+	aess_enable_autogating(va);
+
+	return 0;
+}

arch/arm/mach-omap2/pm.c

@@ -282,8 +282,7 @@ int __init omap2_common_pm_late_init(void)
 	 * a completely different mechanism.
 	 * Disable this part if a DT blob is available.
 	 */
-	if (of_have_populated_dt())
-		return 0;
+	if (!of_have_populated_dt()) {
 
 		/* Init the voltage layer */
 		omap_pmic_late_init();
@@ -295,6 +294,7 @@ int __init omap2_common_pm_late_init(void)
 
 		/* Smartreflex device init */
 		omap_devinit_smartreflex();
+	}
 
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);

arch/arm/mach-omap2/pm24xx.c

@@ -54,7 +54,6 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 
-static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
 				  void __iomem *sdrc_power);
 
@@ -163,6 +162,8 @@ static int omap2_allow_mpu_retention(void)
 
 static void omap2_enter_mpu_retention(void)
 {
+	const int zero = 0;
+
 	/* The peripherals seem not to be able to wake up the MPU when
 	 * it is in retention mode. */
 	if (omap2_allow_mpu_retention()) {
@@ -179,7 +180,8 @@ static void omap2_enter_mpu_retention(void)
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 	}
 
-	omap2_sram_idle();
+	/* WFI */
+	asm("mcr p15, 0, %0, c7, c0, 4" : : "r" (zero) : "memory", "cc");
 
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 }
@@ -333,11 +335,9 @@ int __init omap2_pm_init(void)
 	/*
 	 * We copy the assembler sleep/wakeup routines to SRAM.
 	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
+	 * memory the MPU can see when it wakes up after the entire
+	 * chip enters idle.
 	 */
-	omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
-					 omap24xx_idle_loop_suspend_sz);
-
 	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
 					    omap24xx_cpu_suspend_sz);
 

arch/arm/mach-omap2/pm44xx.c

@@ -77,10 +77,20 @@ static int omap4_pm_suspend(void)
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 		pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
 	}
-	if (ret)
+	if (ret) {
 		pr_crit("Could not enter target state in pm_suspend\n");
-	else
+		/*
+		 * OMAP4 chip PM currently works only with certain (newer)
+		 * versions of bootloaders. This is due to missing code in the
+		 * kernel to properly reset and initialize some devices.
+		 * Warn the user about the bootloader version being one of the
+		 * possible causes.
+		 * http://www.spinics.net/lists/arm-kernel/msg218641.html
+		 */
+		pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
+	} else {
 		pr_info("Successfully put all powerdomains to target state\n");
+	}
 
 	return 0;
 }
@@ -146,6 +156,13 @@ int __init omap4_pm_init(void)
 	}
 
 	pr_err("Power Management for TI OMAP4.\n");
+	/*
+	 * OMAP4 chip PM currently works only with certain (newer)
+	 * versions of bootloaders. This is due to missing code in the
+	 * kernel to properly reset and initialize some devices.
+	 * http://www.spinics.net/lists/arm-kernel/msg218641.html
+	 */
+	pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {

arch/arm/mach-omap2/prm33xx.c

@@ -110,11 +110,11 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
 		u16 rstctrl_offs, u16 rstst_offs)
 {
 	int c;
-	u32 mask = 1 << shift;
+	u32 mask = 1 << st_shift;
 
 	/* Check the current status to avoid  de-asserting the line twice */
 	if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
@@ -122,11 +122,14 @@ int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
 
 	/* Clear the reset status by writing 1 to the status bit */
 	am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs);
+
 	/* de-assert the reset control line */
+	mask = 1 << shift;
+
 	am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
-	/* wait the status to be set */
 
-	omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst,
+	/* wait the status to be set */
+	omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, inst,
 							   rstst_offs),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 

arch/arm/mach-omap2/prm33xx.h

@@ -117,6 +117,7 @@
 #define AM33XX_PM_CEFUSE_PWRSTST_OFFSET		0x0004
 #define AM33XX_PM_CEFUSE_PWRSTST		AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
 
+#ifndef __ASSEMBLER__
 extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
 extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
 extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
@@ -124,6 +125,7 @@ extern void am33xx_prm_global_warm_sw_reset(void);
 extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
 		u16 rstctrl_offs);
 extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
-extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+extern int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
 		u16 rstctrl_offs, u16 rstst_offs);
+#endif /* ASSEMBLER */
 #endif

arch/arm/mach-omap2/sleep24xx.S

@@ -36,25 +36,6 @@
 
 	.text
 
-/*
- * Forces OMAP into idle state
- *
- * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
- * for normal idles.
- *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- *	 wakes up it continues execution at the point it went to sleep.
- */
-	.align	3
-ENTRY(omap24xx_idle_loop_suspend)
-	stmfd	sp!, {r0, lr}		@ save registers on stack
-	mov	r0, #0			@ clear for mcr setup
-	mcr	p15, 0, r0, c7, c0, 4	@ wait for interrupt
-	ldmfd	sp!, {r0, pc}		@ restore regs and return
-
-ENTRY(omap24xx_idle_loop_suspend_sz)
-	.word	. - omap24xx_idle_loop_suspend
-
 /*
  * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
  * SDRC shutdown then ARM shutdown.  Upon wake MPU is back on so just restore

arch/arm/mach-omap2/soc.h

@@ -395,6 +395,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #define AM335X_CLASS		0x33500033
 #define AM335X_REV_ES1_0	AM335X_CLASS
+#define AM335X_REV_ES2_0	(AM335X_CLASS | (0x1 << 8))
 
 #define OMAP443X_CLASS		0x44300044
 #define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))

arch/arm/mach-omap2/sr_device.c

@@ -152,7 +152,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	sr_data->enable_on_init = sr_enable_on_init;
 
-	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), 0);
+	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
 	if (IS_ERR(pdev))
 		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
 			__func__, name, oh->name);

arch/arm/plat-omap/Kconfig

@@ -147,15 +147,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 	help
 	  PPA routine service ID for setting L2 auxiliary control register.
 
-config OMAP_32K_TIMER_HZ
-	int "Kernel internal timer frequency for 32KHz timer"
-	range 32 1024
-	depends on OMAP_32K_TIMER
-	default "128"
-	help
-	  Kernel internal timer frequency should be a divisor of 32768,
-	  such as 64 or 128.
-
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS

arch/arm/plat-omap/include/plat/timex.h

@@ -28,14 +28,6 @@
 #if !defined(__ASM_ARCH_OMAP_TIMEX_H)
 #define __ASM_ARCH_OMAP_TIMEX_H
 
-/*
- * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
- * and that's why the CLOCK_TICK_RATE is not 32768.
- */
-#ifdef CONFIG_OMAP_32K_TIMER
-#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
-#else
 #define CLOCK_TICK_RATE		(HZ * 100000UL)
-#endif
 
 #endif /* __ASM_ARCH_OMAP_TIMEX_H */

drivers/media/platform/omap3isp/isp.c

@@ -1338,28 +1338,15 @@ static int isp_enable_clocks(struct isp_device *isp)
 {
 	int r;
 	unsigned long rate;
-	int divisor;
-
-	/*
-	 * cam_mclk clock chain:
-	 *   dpll4 -> dpll4_m5 -> dpll4_m5x2 -> cam_mclk
-	 *
-	 * In OMAP3630 dpll4_m5x2 != 2 x dpll4_m5 but both are
-	 * set to the same value. Hence the rate set for dpll4_m5
-	 * has to be twice of what is set on OMAP3430 to get
-	 * the required value for cam_mclk
-	 */
-	divisor = isp->revision == ISP_REVISION_15_0 ? 1 : 2;
 
 	r = clk_prepare_enable(isp->clock[ISP_CLK_CAM_ICK]);
 	if (r) {
 		dev_err(isp->dev, "failed to enable cam_ick clock\n");
 		goto out_clk_enable_ick;
 	}
-	r = clk_set_rate(isp->clock[ISP_CLK_DPLL4_M5_CK],
-			 CM_CAM_MCLK_HZ/divisor);
+	r = clk_set_rate(isp->clock[ISP_CLK_CAM_MCLK], CM_CAM_MCLK_HZ);
 	if (r) {
-		dev_err(isp->dev, "clk_set_rate for dpll4_m5_ck failed\n");
+		dev_err(isp->dev, "clk_set_rate for cam_mclk failed\n");
 		goto out_clk_enable_mclk;
 	}
 	r = clk_prepare_enable(isp->clock[ISP_CLK_CAM_MCLK]);
@@ -1401,7 +1388,6 @@ static void isp_disable_clocks(struct isp_device *isp)
 static const char *isp_clocks[] = {
 	"cam_ick",
 	"cam_mclk",
-	"dpll4_m5_ck",
 	"csi2_96m_fck",
 	"l3_ick",
 };

drivers/media/platform/omap3isp/isp.h

@@ -147,7 +147,6 @@ struct isp_platform_callback {
  * @ref_count: Reference count for handling multiple ISP requests.
  * @cam_ick: Pointer to camera interface clock structure.
  * @cam_mclk: Pointer to camera functional clock structure.
- * @dpll4_m5_ck: Pointer to DPLL4 M5 clock structure.
  * @csi2_fck: Pointer to camera CSI2 complexIO clock structure.
  * @l3_ick: Pointer to OMAP3 L3 bus interface clock.
  * @irq: Currently attached ISP ISR callbacks information structure.
@@ -189,10 +188,9 @@ struct isp_device {
 	u32 xclk_divisor[2];	/* Two clocks, a and b. */
 #define ISP_CLK_CAM_ICK		0
 #define ISP_CLK_CAM_MCLK	1
-#define ISP_CLK_DPLL4_M5_CK	2
-#define ISP_CLK_CSI2_FCK	3
-#define ISP_CLK_L3_ICK		4
-	struct clk *clock[5];
+#define ISP_CLK_CSI2_FCK	2
+#define ISP_CLK_L3_ICK		3
+	struct clk *clock[4];
 
 	/* ISP modules */
 	struct ispstat isp_af;

include/sound/aess.h

+/*
+ * AESS IP block reset
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#ifndef __SOUND_AESS_H__
+#define __SOUND_AESS_H__
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+/*
+ * AESS_AUTO_GATING_ENABLE_OFFSET: offset in bytes of the AESS IP
+ *     block's AESS_AUTO_GATING_ENABLE__1 register from the IP block's
+ *     base address
+ */
+#define AESS_AUTO_GATING_ENABLE_OFFSET			0x07c
+
+/* Register bitfields in the AESS_AUTO_GATING_ENABLE__1 register */
+#define AESS_AUTO_GATING_ENABLE_SHIFT			0
+
+/**
+ * aess_enable_autogating - enable AESS internal autogating
+ * @oh: struct omap_hwmod *
+ *
+ * Enable internal autogating on the AESS.  This allows the AESS to
+ * indicate that it is idle to the OMAP PRCM.  Returns 0.
+ */
+static inline void aess_enable_autogating(void __iomem *base)
+{
+	u32 v;
+
+	/* Set AESS_AUTO_GATING_ENABLE__1.ENABLE to allow idle entry */
+	v = 1 << AESS_AUTO_GATING_ENABLE_SHIFT;
+	writel(v, base + AESS_AUTO_GATING_ENABLE_OFFSET);
+}
+
+#endif /* __SOUND_AESS_H__ */