Commit 77d33897 authored by Lubomir Rintel's avatar Lubomir Rintel Committed by Mark Brown

spi: pxa2xx: Add ready signal

Strobe a GPIO line when the slave TX FIFO is filled. This is how the
Embedded Controller on an OLPC XO-1.75 machine, that happens to be a SPI
master, learns that it can initiate a transaction.
Signed-off-by: default avatarLubomir Rintel <lkundrak@v3.sk>
Tested-by: default avatarPavel Machek <pavel@ucw.cz>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 8ae13d0b
......@@ -1081,6 +1081,11 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *master,
if (spi_controller_is_slave(master)) {
while (drv_data->write(drv_data))
;
if (drv_data->gpiod_ready) {
gpiod_set_value(drv_data->gpiod_ready, 1);
udelay(1);
gpiod_set_value(drv_data->gpiod_ready, 0);
}
}
/*
......@@ -1778,7 +1783,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
if (PTR_ERR(gpiod) == -ENOENT)
continue;
status = (int)PTR_ERR(gpiod);
status = PTR_ERR(gpiod);
goto out_error_clock_enabled;
} else {
drv_data->cs_gpiods[i] = gpiod;
......@@ -1786,6 +1791,15 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
}
}
if (platform_info->is_slave) {
drv_data->gpiod_ready = devm_gpiod_get_optional(dev,
"ready", GPIOD_OUT_LOW);
if (IS_ERR(drv_data->gpiod_ready)) {
status = PTR_ERR(drv_data->gpiod_ready);
goto out_error_clock_enabled;
}
}
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
......
......@@ -64,6 +64,9 @@ struct driver_data {
/* GPIOs for chip selects */
struct gpio_desc **cs_gpiods;
/* Optional slave FIFO ready signal */
struct gpio_desc *gpiod_ready;
};
struct chip_data {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment