net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init

Loongson delivers two types of the network devices: Loongson GMAC and
Loongson GNET in the framework of four SOC/Chipsets revisions:

   Chip             Network  PCI Dev ID   Synopys Version   DMA-channel
LS2K1000 SOC         GMAC      0x7a03       v3.50a/v3.73a        1
LS7A1000 Chipset     GMAC      0x7a03       v3.50a/v3.73a        1
LS2K2000 SOC         GMAC      0x7a03          v3.73a            8
LS2K2000 SOC         GNET      0x7a13          v3.73a            8
LS7A2000 Chipset     GNET      0x7a13          v3.73a            1

The driver currently supports the chips with the Loongson GMAC network
device synthesized with a single DMA-channel available. As a
preparation before adding the Loongson GNET support detach the
Loongson GMAC-specific platform data initializations to the
loongson_gmac_data() method and preserve the common settings in the
loongson_default_data().

While at it drop the return value statement from the
loongson_default_data() method as redundant.

Note there is no intermediate vendor-specific PCS in between the MAC
and PHY on Loongson GMAC and GNET. So the plat->mac_interface field
can be freely initialized with the PHY_INTERFACE_MODE_NA value.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c

@@ -11,7 +11,7 @@
 
 #define PCI_DEVICE_ID_LOONGSON_GMAC	0x7a03
 
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+static void loongson_default_data(struct plat_stmmacenet_data *plat)
 {
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
@@ -20,16 +20,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
 	/* Set default value for multicast hash bins */
 	plat->multicast_filter_bins = 256;
 
+	plat->mac_interface = PHY_INTERFACE_MODE_NA;
+
 	/* Set default value for unicast filter entries */
 	plat->unicast_filter_entries = 1;
 
 	/* Set the maxmtu to a default of JUMBO_LEN */
 	plat->maxmtu = JUMBO_LEN;
 
-	/* Set default number of RX and TX queues to use */
-	plat->tx_queues_to_use = 1;
-	plat->rx_queues_to_use = 1;
-
 	/* Disable Priority config by default */
 	plat->tx_queues_cfg[0].use_prio = false;
 	plat->rx_queues_cfg[0].use_prio = false;
@@ -42,6 +40,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
 
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
+}
+
+static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
+{
+	loongson_default_data(plat);
+
+	plat->tx_queues_to_use = 1;
+	plat->rx_queues_to_use = 1;
 
 	return 0;
 }
@@ -111,11 +117,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 	}
 
 	plat->phy_interface = phy_mode;
-	plat->mac_interface = PHY_INTERFACE_MODE_GMII;
 
 	pci_set_master(pdev);
 
-	loongson_default_data(plat);
+	loongson_gmac_data(plat);
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];