diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 66f92d1194c11f54c175cc06c7bcf479078df719..40818fffe9d5c74b730c48b150c095aeb298dea6 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -43,10 +43,11 @@ This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
-Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to
-the device. Usually you do it by looking for the vendor string. If you have
-many similar devices, unplug one and compare two /proc/bus/usb/devices outputs.
-The T-line will have a bus number. Example:
+Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds
+to the device. Usually you do it by looking for the vendor string. If you have
+many similar devices, unplug one and compare the two
+/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number.
+Example:
 
 T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
 D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
@@ -54,7 +55,10 @@ P:  Vendor=0557 ProdID=2004 Rev= 1.00
 S:  Manufacturer=ATEN
 S:  Product=UC100KM V2.00
 
-Bus=03 means it's bus 3.
+"Bus=03" means it's bus 3. Alternatively, you can look at the output from
+"lsusb" and get the bus number from the appropriate line. Example:
+
+Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00
 
 3. Start 'cat'