Merge branch 'gianfar'

Claudiu Manoil says:

====================
gianfar: Device configuration fixes

This patchset represents the first part of an effort
to solve some old device configuration issues in gianfar,
especially run-time reset and re-configuration problems.
I'm referring to "on-the-fly" configuration of registers
against HW specification, concurrency issues during device
reset / re-configuration operations, and implementing HW
advisories for these operations.

There's also a good deal of code cleanup and refactoring,
and some other (minor) fixes as well.

v2: Remove sysfs stubs w/o replacing them with module
    params (patch 2).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/gianfar.txt

 The Gianfar Ethernet Driver
-Sysfs File description
 
 Author: Andy Fleming <afleming@freescale.com>
 Updated: 2005-07-28
 
-SYSFS
-
-Several of the features of the gianfar driver are controlled
-through sysfs files.  These are:
-
-bd_stash:
-To stash RX Buffer Descriptors in the L2, echo 'on' or '1' to
-bd_stash, echo 'off' or '0' to disable
-
-rx_stash_len:
-To stash the first n bytes of the packet in L2, echo the number
-of bytes to buf_stash_len.  echo 0 to disable.
-
-WARNING: You could really screw these up if you set them too low or high!
-fifo_threshold:
-To change the number of bytes the controller needs in the
-fifo before it starts transmission, echo the number of bytes to 
-fifo_thresh.  Range should be 0-511.
-
-fifo_starve:
-When the FIFO has less than this many bytes during a transmit, it
-enters starve mode, and increases the priority of TX memory
-transactions.  To change, echo the number of bytes to
-fifo_starve.  Range should be 0-511.
-
-fifo_starve_off:
-Once in starve mode, the FIFO remains there until it has this
-many bytes.  To change, echo the number of bytes to
-fifo_starve_off.  Range should be 0-511.
 
 CHECKSUM OFFLOADING
 

drivers/net/ethernet/freescale/Makefile

@@ -14,7 +14,6 @@ obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
 gianfar_driver-objs := gianfar.o \
-		gianfar_ethtool.o \
-		gianfar_sysfs.o
+		gianfar_ethtool.o
 obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
 ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o

drivers/net/ethernet/freescale/gianfar.h

@@ -9,7 +9,7 @@
  * Maintainer: Kumar Gala
  * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011-2013 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -880,7 +880,6 @@ struct gfar {
 #define FSL_GIANFAR_DEV_HAS_CSUM		0x00000010
 #define FSL_GIANFAR_DEV_HAS_VLAN		0x00000020
 #define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH	0x00000040
-#define FSL_GIANFAR_DEV_HAS_PADDING		0x00000080
 #define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET	0x00000100
 #define FSL_GIANFAR_DEV_HAS_BD_STASHING		0x00000200
 #define FSL_GIANFAR_DEV_HAS_BUF_STASHING	0x00000400
@@ -892,8 +891,8 @@ struct gfar {
 #define DEFAULT_MAPPING 	0xFF
 #endif
 
-#define ISRG_SHIFT_TX	0x10
-#define ISRG_SHIFT_RX	0x18
+#define ISRG_RR0	0x80000000
+#define ISRG_TR0	0x00800000
 
 /* The same driver can operate in two modes */
 /* SQ_SG_MODE: Single Queue Single Group Mode
@@ -1113,6 +1112,9 @@ struct gfar_private {
 	unsigned int total_tx_ring_size;
 	unsigned int total_rx_ring_size;
 
+	u32 rqueue;
+	u32 tqueue;
+
 	/* RX per device parameters */
 	unsigned int rx_stash_size;
 	unsigned int rx_stash_index;
@@ -1127,11 +1129,6 @@ struct gfar_private {
 	u32 __iomem *hash_regs[16];
 	int hash_width;
 
-	/* global parameters */
-	unsigned int fifo_threshold;
-	unsigned int fifo_starve;
-	unsigned int fifo_starve_off;
-
 	/*Filer table*/
 	unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
 	unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
@@ -1176,6 +1173,31 @@ static inline void gfar_read_filer(struct gfar_private *priv,
 	*fpr = gfar_read(&regs->rqfpr);
 }
 
+static inline void gfar_write_isrg(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 __iomem *baddr = &regs->isrg0;
+	u32 isrg = 0;
+	int grp_idx, i;
+
+	for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) {
+		struct gfar_priv_grp *grp = &priv->gfargrp[grp_idx];
+
+		for_each_set_bit(i, &grp->rx_bit_map, priv->num_rx_queues) {
+			isrg |= (ISRG_RR0 >> i);
+		}
+
+		for_each_set_bit(i, &grp->tx_bit_map, priv->num_tx_queues) {
+			isrg |= (ISRG_TR0 >> i);
+		}
+
+		gfar_write(baddr, isrg);
+
+		baddr++;
+		isrg = 0;
+	}
+}
+
 void lock_rx_qs(struct gfar_private *priv);
 void lock_tx_qs(struct gfar_private *priv);
 void unlock_rx_qs(struct gfar_private *priv);
@@ -1183,11 +1205,11 @@ void unlock_tx_qs(struct gfar_private *priv);
 irqreturn_t gfar_receive(int irq, void *dev_id);
 int startup_gfar(struct net_device *dev);
 void stop_gfar(struct net_device *dev);
-void gfar_halt(struct net_device *dev);
+void gfar_halt(struct gfar_private *priv);
+void gfar_start(struct gfar_private *priv);
 void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable,
 		   u32 regnum, u32 read);
 void gfar_configure_coalescing_all(struct gfar_private *priv);
-void gfar_init_sysfs(struct net_device *dev);
 int gfar_set_features(struct net_device *dev, netdev_features_t features);
 void gfar_check_rx_parser_mode(struct gfar_private *priv);
 void gfar_vlan_mode(struct net_device *dev, netdev_features_t features);

drivers/net/ethernet/freescale/gianfar_ethtool.c

@@ -44,10 +44,6 @@
 
 #include "gianfar.h"
 
-extern void gfar_start(struct net_device *dev);
-extern int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue,
-			      int rx_work_limit);
-
 #define GFAR_MAX_COAL_USECS 0xffff
 #define GFAR_MAX_COAL_FRAMES 0xff
 static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
@@ -467,15 +463,13 @@ static void gfar_gringparam(struct net_device *dev,
 }
 
 /* Change the current ring parameters, stopping the controller if
- * necessary so that we don't mess things up while we're in
- * motion.  We wait for the ring to be clean before reallocating
- * the rings.
+ * necessary so that we don't mess things up while we're in motion.
  */
 static int gfar_sringparam(struct net_device *dev,
 			   struct ethtool_ringparam *rvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	int err = 0, i = 0;
+	int err = 0, i;
 
 	if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE)
 		return -EINVAL;
@@ -493,38 +487,15 @@ static int gfar_sringparam(struct net_device *dev,
 		return -EINVAL;
 	}
 
-
-	if (dev->flags & IFF_UP) {
-		unsigned long flags;
-
-		/* Halt TX and RX, and process the frames which
-		 * have already been received
-		 */
-		local_irq_save(flags);
-		lock_tx_qs(priv);
-		lock_rx_qs(priv);
-
-		gfar_halt(dev);
-
-		unlock_rx_qs(priv);
-		unlock_tx_qs(priv);
-		local_irq_restore(flags);
-
-		for (i = 0; i < priv->num_rx_queues; i++)
-			gfar_clean_rx_ring(priv->rx_queue[i],
-					   priv->rx_queue[i]->rx_ring_size);
-
-		/* Now we take down the rings to rebuild them */
+	if (dev->flags & IFF_UP)
 		stop_gfar(dev);
-	}
 
-	/* Change the size */
-	for (i = 0; i < priv->num_rx_queues; i++) {
+	/* Change the sizes */
+	for (i = 0; i < priv->num_rx_queues; i++)
 		priv->rx_queue[i]->rx_ring_size = rvals->rx_pending;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
 		priv->tx_queue[i]->tx_ring_size = rvals->tx_pending;
-		priv->tx_queue[i]->num_txbdfree =
-			priv->tx_queue[i]->tx_ring_size;
-	}
 
 	/* Rebuild the rings with the new size */
 	if (dev->flags & IFF_UP) {
@@ -608,10 +579,8 @@ static int gfar_spauseparam(struct net_device *dev,
 
 int gfar_set_features(struct net_device *dev, netdev_features_t features)
 {
-	struct gfar_private *priv = netdev_priv(dev);
-	unsigned long flags;
-	int err = 0, i = 0;
 	netdev_features_t changed = dev->features ^ features;
+	int err = 0;
 
 	if (changed & (NETIF_F_HW_VLAN_CTAG_TX|NETIF_F_HW_VLAN_CTAG_RX))
 		gfar_vlan_mode(dev, features);
@@ -620,23 +589,6 @@ int gfar_set_features(struct net_device *dev, netdev_features_t features)
 		return 0;
 
 	if (dev->flags & IFF_UP) {
-		/* Halt TX and RX, and process the frames which
-		 * have already been received
-		 */
-		local_irq_save(flags);
-		lock_tx_qs(priv);
-		lock_rx_qs(priv);
-
-		gfar_halt(dev);
-
-		unlock_tx_qs(priv);
-		unlock_rx_qs(priv);
-		local_irq_restore(flags);
-
-		for (i = 0; i < priv->num_rx_queues; i++)
-			gfar_clean_rx_ring(priv->rx_queue[i],
-					   priv->rx_queue[i]->rx_ring_size);
-
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
 

drivers/net/ethernet/freescale/gianfar_sysfs.c

-/*
- * drivers/net/ethernet/freescale/gianfar_sysfs.c
- *
- * Gianfar Ethernet Driver
- * This driver is designed for the non-CPM ethernet controllers
- * on the 85xx and 83xx family of integrated processors
- * Based on 8260_io/fcc_enet.c
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala (galak@kernel.crashing.org)
- * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
- *
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Sysfs file creation and management
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-
-#include <asm/uaccess.h>
-#include <linux/module.h>
-
-#include "gianfar.h"
-
-static ssize_t gfar_show_bd_stash(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%s\n", priv->bd_stash_en ? "on" : "off");
-}
-
-static ssize_t gfar_set_bd_stash(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	int new_setting = 0;
-	u32 temp;
-	unsigned long flags;
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BD_STASHING))
-		return count;
-
-
-	/* Find out the new setting */
-	if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
-		new_setting = 1;
-	else if (!strncmp("off", buf, count - 1) ||
-		 !strncmp("0", buf, count - 1))
-		new_setting = 0;
-	else
-		return count;
-
-
-	local_irq_save(flags);
-	lock_rx_qs(priv);
-
-	/* Set the new stashing value */
-	priv->bd_stash_en = new_setting;
-
-	temp = gfar_read(&regs->attr);
-
-	if (new_setting)
-		temp |= ATTR_BDSTASH;
-	else
-		temp &= ~(ATTR_BDSTASH);
-
-	gfar_write(&regs->attr, temp);
-
-	unlock_rx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(bd_stash, 0644, gfar_show_bd_stash, gfar_set_bd_stash);
-
-static ssize_t gfar_show_rx_stash_size(struct device *dev,
-				       struct device_attribute *attr, char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->rx_stash_size);
-}
-
-static ssize_t gfar_set_rx_stash_size(struct device *dev,
-				      struct device_attribute *attr,
-				      const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int length = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
-		return count;
-
-	local_irq_save(flags);
-	lock_rx_qs(priv);
-
-	if (length > priv->rx_buffer_size)
-		goto out;
-
-	if (length == priv->rx_stash_size)
-		goto out;
-
-	priv->rx_stash_size = length;
-
-	temp = gfar_read(&regs->attreli);
-	temp &= ~ATTRELI_EL_MASK;
-	temp |= ATTRELI_EL(length);
-	gfar_write(&regs->attreli, temp);
-
-	/* Turn stashing on/off as appropriate */
-	temp = gfar_read(&regs->attr);
-
-	if (length)
-		temp |= ATTR_BUFSTASH;
-	else
-		temp &= ~(ATTR_BUFSTASH);
-
-	gfar_write(&regs->attr, temp);
-
-out:
-	unlock_rx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(rx_stash_size, 0644, gfar_show_rx_stash_size,
-		   gfar_set_rx_stash_size);
-
-/* Stashing will only be enabled when rx_stash_size != 0 */
-static ssize_t gfar_show_rx_stash_index(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->rx_stash_index);
-}
-
-static ssize_t gfar_set_rx_stash_index(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned short index = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
-		return count;
-
-	local_irq_save(flags);
-	lock_rx_qs(priv);
-
-	if (index > priv->rx_stash_size)
-		goto out;
-
-	if (index == priv->rx_stash_index)
-		goto out;
-
-	priv->rx_stash_index = index;
-
-	temp = gfar_read(&regs->attreli);
-	temp &= ~ATTRELI_EI_MASK;
-	temp |= ATTRELI_EI(index);
-	gfar_write(&regs->attreli, temp);
-
-out:
-	unlock_rx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(rx_stash_index, 0644, gfar_show_rx_stash_index,
-		   gfar_set_rx_stash_index);
-
-static ssize_t gfar_show_fifo_threshold(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->fifo_threshold);
-}
-
-static ssize_t gfar_set_fifo_threshold(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int length = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (length > GFAR_MAX_FIFO_THRESHOLD)
-		return count;
-
-	local_irq_save(flags);
-	lock_tx_qs(priv);
-
-	priv->fifo_threshold = length;
-
-	temp = gfar_read(&regs->fifo_tx_thr);
-	temp &= ~FIFO_TX_THR_MASK;
-	temp |= length;
-	gfar_write(&regs->fifo_tx_thr, temp);
-
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(fifo_threshold, 0644, gfar_show_fifo_threshold,
-		   gfar_set_fifo_threshold);
-
-static ssize_t gfar_show_fifo_starve(struct device *dev,
-				     struct device_attribute *attr, char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->fifo_starve);
-}
-
-static ssize_t gfar_set_fifo_starve(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int num = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (num > GFAR_MAX_FIFO_STARVE)
-		return count;
-
-	local_irq_save(flags);
-	lock_tx_qs(priv);
-
-	priv->fifo_starve = num;
-
-	temp = gfar_read(&regs->fifo_tx_starve);
-	temp &= ~FIFO_TX_STARVE_MASK;
-	temp |= num;
-	gfar_write(&regs->fifo_tx_starve, temp);
-
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(fifo_starve, 0644, gfar_show_fifo_starve,
-		   gfar_set_fifo_starve);
-
-static ssize_t gfar_show_fifo_starve_off(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
-	return sprintf(buf, "%d\n", priv->fifo_starve_off);
-}
-
-static ssize_t gfar_set_fifo_starve_off(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t count)
-{
-	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-	struct gfar __iomem *regs = priv->gfargrp[0].regs;
-	unsigned int num = simple_strtoul(buf, NULL, 0);
-	u32 temp;
-	unsigned long flags;
-
-	if (num > GFAR_MAX_FIFO_STARVE_OFF)
-		return count;
-
-	local_irq_save(flags);
-	lock_tx_qs(priv);
-
-	priv->fifo_starve_off = num;
-
-	temp = gfar_read(&regs->fifo_tx_starve_shutoff);
-	temp &= ~FIFO_TX_STARVE_OFF_MASK;
-	temp |= num;
-	gfar_write(&regs->fifo_tx_starve_shutoff, temp);
-
-	unlock_tx_qs(priv);
-	local_irq_restore(flags);
-
-	return count;
-}
-
-static DEVICE_ATTR(fifo_starve_off, 0644, gfar_show_fifo_starve_off,
-		   gfar_set_fifo_starve_off);
-
-void gfar_init_sysfs(struct net_device *dev)
-{
-	struct gfar_private *priv = netdev_priv(dev);
-	int rc;
-
-	/* Initialize the default values */
-	priv->fifo_threshold = DEFAULT_FIFO_TX_THR;
-	priv->fifo_starve = DEFAULT_FIFO_TX_STARVE;
-	priv->fifo_starve_off = DEFAULT_FIFO_TX_STARVE_OFF;
-
-	/* Create our sysfs files */
-	rc = device_create_file(&dev->dev, &dev_attr_bd_stash);
-	rc |= device_create_file(&dev->dev, &dev_attr_rx_stash_size);
-	rc |= device_create_file(&dev->dev, &dev_attr_rx_stash_index);
-	rc |= device_create_file(&dev->dev, &dev_attr_fifo_threshold);
-	rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve);
-	rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve_off);
-	if (rc)
-		dev_err(&dev->dev, "Error creating gianfar sysfs files\n");
-}