scsi: ipr: Remove obsolete check for old CPUs

The IPR driver has a routine to check whether it's running on certain CPU
versions and if so whether the adapter is supported on that CPU.

But none of the CPUs it checks for are supported by Linux anymore.

The most recent CPU it checks for is Power4+ which was removed in commit
471d7ff8 ("powerpc/64s: Remove POWER4 support").

So drop the check. That makes the "testmode" module parameter unused, so
remove it as well.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20231127111740.1288463-1-mpe@ellerman.id.auAcked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/ipr.c

@@ -77,7 +77,6 @@
 static LIST_HEAD(ipr_ioa_head);
 static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL;
 static unsigned int ipr_max_speed = 1;
-static int ipr_testmode = 0;
 static unsigned int ipr_fastfail = 0;
 static unsigned int ipr_transop_timeout = 0;
 static unsigned int ipr_debug = 0;
@@ -193,8 +192,6 @@ module_param_named(max_speed, ipr_max_speed, uint, 0);
 MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320");
 module_param_named(log_level, ipr_log_level, uint, 0);
 MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver");
-module_param_named(testmode, ipr_testmode, int, 0);
-MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations");
 module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries");
 module_param_named(transop_timeout, ipr_transop_timeout, int, 0);
@@ -6416,45 +6413,6 @@ static const struct scsi_host_template driver_template = {
 	.proc_name = IPR_NAME,
 };
 
-#ifdef CONFIG_PPC_PSERIES
-static const u16 ipr_blocked_processors[] = {
-	PVR_NORTHSTAR,
-	PVR_PULSAR,
-	PVR_POWER4,
-	PVR_ICESTAR,
-	PVR_SSTAR,
-	PVR_POWER4p,
-	PVR_630,
-	PVR_630p
-};
-
-/**
- * ipr_invalid_adapter - Determine if this adapter is supported on this hardware
- * @ioa_cfg:	ioa cfg struct
- *
- * Adapters that use Gemstone revision < 3.1 do not work reliably on
- * certain pSeries hardware. This function determines if the given
- * adapter is in one of these confgurations or not.
- *
- * Return value:
- * 	1 if adapter is not supported / 0 if adapter is supported
- **/
-static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
-{
-	int i;
-
-	if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) {
-		for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++) {
-			if (pvr_version_is(ipr_blocked_processors[i]))
-				return 1;
-		}
-	}
-	return 0;
-}
-#else
-#define ipr_invalid_adapter(ioa_cfg) 0
-#endif
-
 /**
  * ipr_ioa_bringdown_done - IOA bring down completion.
  * @ipr_cmd:	ipr command struct
@@ -7385,19 +7343,6 @@ static int ipr_ioafp_page0_inquiry(struct ipr_cmnd *ipr_cmd)
 	type[4] = '\0';
 	ioa_cfg->type = simple_strtoul((char *)type, NULL, 16);
 
-	if (ipr_invalid_adapter(ioa_cfg)) {
-		dev_err(&ioa_cfg->pdev->dev,
-			"Adapter not supported in this hardware configuration.\n");
-
-		if (!ipr_testmode) {
-			ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES;
-			ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
-			list_add_tail(&ipr_cmd->queue,
-					&ioa_cfg->hrrq->hrrq_free_q);
-			return IPR_RC_JOB_RETURN;
-		}
-	}
-
 	ipr_cmd->job_step = ipr_ioafp_page3_inquiry;
 
 	ipr_ioafp_inquiry(ipr_cmd, 1, 0,