qed: QL41xxx VF MSI-x table

The QL41xxx adapters' PCI allows a single configuration for the
MSI-x table size of all child VFs of a given PF.
The existing code wouldn't cause the management firmware to set
that value, meaning the VFs would retain the default MSI-x table
size.

Introduce a new scheme so that whenever a VF is enabled, driver
would set the number of MSI-x to be the maximum over the various
VFs' needs.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_hsi.h

@@ -11477,6 +11477,7 @@ struct public_drv_mb {
 #define DRV_MSG_CODE_INITIATE_PF_FLR            0x02010000
 #define DRV_MSG_CODE_VF_DISABLED_DONE		0xc0000000
 #define DRV_MSG_CODE_CFG_VF_MSIX		0xc0010000
+#define DRV_MSG_CODE_CFG_PF_VFS_MSIX		0xc0020000
 #define DRV_MSG_CODE_NVM_GET_FILE_ATT		0x00030000
 #define DRV_MSG_CODE_NVM_READ_NVRAM		0x00050000
 #define DRV_MSG_CODE_MCP_RESET			0x00090000
@@ -11640,7 +11641,7 @@ struct public_drv_mb {
 
 #define FW_MSG_CODE_OS_WOL_SUPPORTED            0x00800000
 #define FW_MSG_CODE_OS_WOL_NOT_SUPPORTED        0x00810000
-
+#define FW_MSG_CODE_DRV_CFG_PF_VFS_MSIX_DONE	0x00870000
 #define FW_MSG_SEQ_NUMBER_MASK			0x0000ffff
 
 	u32 fw_mb_param;

drivers/net/ethernet/qlogic/qed/qed_mcp.c

@@ -1801,8 +1801,9 @@ int qed_mcp_get_flash_size(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
-int qed_mcp_config_vf_msix(struct qed_hwfn *p_hwfn,
-			   struct qed_ptt *p_ptt, u8 vf_id, u8 num)
+static int
+qed_mcp_config_vf_msix_bb(struct qed_hwfn *p_hwfn,
+			  struct qed_ptt *p_ptt, u8 vf_id, u8 num)
 {
 	u32 resp = 0, param = 0, rc_param = 0;
 	int rc;
@@ -1832,6 +1833,36 @@ int qed_mcp_config_vf_msix(struct qed_hwfn *p_hwfn,
 	return rc;
 }
 
+static int
+qed_mcp_config_vf_msix_ah(struct qed_hwfn *p_hwfn,
+			  struct qed_ptt *p_ptt, u8 num)
+{
+	u32 resp = 0, param = num, rc_param = 0;
+	int rc;
+
+	rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_CFG_PF_VFS_MSIX,
+			 param, &resp, &rc_param);
+
+	if (resp != FW_MSG_CODE_DRV_CFG_PF_VFS_MSIX_DONE) {
+		DP_NOTICE(p_hwfn, "MFW failed to set MSI-X for VFs\n");
+		rc = -EINVAL;
+	} else {
+		DP_VERBOSE(p_hwfn, QED_MSG_IOV,
+			   "Requested 0x%02x MSI-x interrupts for VFs\n", num);
+	}
+
+	return rc;
+}
+
+int qed_mcp_config_vf_msix(struct qed_hwfn *p_hwfn,
+			   struct qed_ptt *p_ptt, u8 vf_id, u8 num)
+{
+	if (QED_IS_BB(p_hwfn->cdev))
+		return qed_mcp_config_vf_msix_bb(p_hwfn, p_ptt, vf_id, num);
+	else
+		return qed_mcp_config_vf_msix_ah(p_hwfn, p_ptt, num);
+}
+
 int
 qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn,
 			 struct qed_ptt *p_ptt,

drivers/net/ethernet/qlogic/qed/qed_sriov.c

@@ -747,6 +747,35 @@ static void qed_iov_vf_igu_set_int(struct qed_hwfn *p_hwfn,
 	qed_fid_pretend(p_hwfn, p_ptt, (u16) p_hwfn->hw_info.concrete_fid);
 }
 
+static int
+qed_iov_enable_vf_access_msix(struct qed_hwfn *p_hwfn,
+			      struct qed_ptt *p_ptt, u8 abs_vf_id, u8 num_sbs)
+{
+	u8 current_max = 0;
+	int i;
+
+	/* For AH onward, configuration is per-PF. Find maximum of all
+	 * the currently enabled child VFs, and set the number to be that.
+	 */
+	if (!QED_IS_BB(p_hwfn->cdev)) {
+		qed_for_each_vf(p_hwfn, i) {
+			struct qed_vf_info *p_vf;
+
+			p_vf = qed_iov_get_vf_info(p_hwfn, (u16)i, true);
+			if (!p_vf)
+				continue;
+
+			current_max = max_t(u8, current_max, p_vf->num_sbs);
+		}
+	}
+
+	if (num_sbs > current_max)
+		return qed_mcp_config_vf_msix(p_hwfn, p_ptt,
+					      abs_vf_id, num_sbs);
+
+	return 0;
+}
+
 static int qed_iov_enable_vf_access(struct qed_hwfn *p_hwfn,
 				    struct qed_ptt *p_ptt,
 				    struct qed_vf_info *vf)
@@ -771,7 +800,8 @@ static int qed_iov_enable_vf_access(struct qed_hwfn *p_hwfn,
 
 	qed_iov_vf_igu_reset(p_hwfn, p_ptt, vf);
 
-	rc = qed_mcp_config_vf_msix(p_hwfn, p_ptt, vf->abs_vf_id, vf->num_sbs);
+	rc = qed_iov_enable_vf_access_msix(p_hwfn, p_ptt,
+					   vf->abs_vf_id, vf->num_sbs);
 	if (rc)
 		return rc;