diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
index cf2f5240e176d0b1d60f578db6028f143bfea97c..27cc913ca0f569e840762fc600034247819a1937 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -53,7 +53,8 @@ s24c02: s24c02@50 {
};
pinctrl: pin-controller@10000 {
- pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+ pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
+ &pmx_gpio_header_gpo>;
pinctrl-names = "default";
pmx_uart0: pmx-uart0 {
@@ -85,11 +86,16 @@ pmx_dip_switches: pmx-dip-switches {
* ground.
*/
pmx_gpio_header: pmx-gpio-header {
- marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+ marvell,pins = "mpp17", "mpp29", "mpp28",
"mpp35", "mpp34", "mpp40";
marvell,function = "gpio";
};
+ pmx_gpio_header_gpo: pxm-gpio-header-gpo {
+ marvell,pins = "mpp7";
+ marvell,function = "gpo";
+ };
+
pmx_gpio_init: pmx-init {
marvell,pins = "mpp38";
marvell,function = "gpio";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 3056d7168e0bf0f00ffd333b7b400a52d6ddfb3f..375026867342dd6522167e75f4954a4136c993ec 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -316,6 +316,20 @@ xor11 {
};
};
+ crypto: crypto@90000 {
+ compatible = "inside-secure,safexcel-eip97";
+ reg = <0x90000 0x20000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clocks = <&nb_periph_clk 15>;
+ };
+
sdhci1: sdhci@d0000 {
compatible = "marvell,armada-3700-sdhci",
"marvell,sdhci-xenon";
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 52b5341cb270eb119ef08f3bc7d1d1a8a198f134..3ae05eee2c9a4f234fa6cdbf61de52be75e13fca 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -61,7 +61,13 @@ memory@0 {
reg = <0x0 0x0 0x0 0x80000000>;
};
- cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ };
+
+ cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h0-vbus";
regulator-min-microvolt = <5000000>;
@@ -70,7 +76,7 @@ cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
- cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+ cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h1-vbus";
regulator-min-microvolt = <5000000>;
@@ -79,14 +85,14 @@ cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
- cpm_usb3_0_phy: cpm-usb3-0-phy {
+ cp0_usb3_0_phy: cp0-usb3-0-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&cpm_reg_usb3_0_vbus>;
+ vcc-supply = <&cp0_reg_usb3_0_vbus>;
};
- cpm_usb3_1_phy: cpm-usb3-1-phy {
+ cp0_usb3_1_phy: cp0-usb3-1-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&cpm_reg_usb3_1_vbus>;
+ vcc-supply = <&cp0_reg_usb3_1_vbus>;
};
};
@@ -129,11 +135,11 @@ &uart0 {
};
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
status = "okay";
clock-frequency = <100000>;
@@ -156,7 +162,7 @@ expander0: pca9555@21 {
};
};
-&cpm_nand {
+&cp0_nand {
/*
* SPI on CPM and NAND have common pins on this board. We can
* use only one at a time. To enable the NAND (whihch will
@@ -186,7 +192,7 @@ partition@1000000 {
};
-&cpm_spi1 {
+&cp0_spi1 {
status = "okay";
spi-flash@0 {
@@ -214,17 +220,17 @@ partition@400000 {
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_usb3_0 {
- usb-phy = <&cpm_usb3_0_phy>;
+&cp0_usb3_0 {
+ usb-phy = <&cp0_usb3_0_phy>;
status = "okay";
};
-&cpm_usb3_1 {
- usb-phy = <&cpm_usb3_1_phy>;
+&cp0_usb3_1 {
+ usb-phy = <&cp0_usb3_1_phy>;
status = "okay";
};
@@ -235,14 +241,14 @@ &ap_sdhci0 {
non-removable;
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
};
-&cpm_mdio {
+&cp0_mdio {
status = "okay";
phy0: ethernet-phy@0 {
@@ -253,28 +259,28 @@ phy1: ethernet-phy@1 {
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
/* Network PHY */
phy-mode = "10gbase-kr";
/* Generic PHY, providing serdes lanes */
- phys = <&cpm_comphy2 0>;
+ phys = <&cp0_comphy2 0>;
};
-&cpm_eth1 {
+&cp0_eth1 {
status = "okay";
/* Network PHY */
phy = <&phy0>;
phy-mode = "sgmii";
/* Generic PHY, providing serdes lanes */
- phys = <&cpm_comphy0 1>;
+ phys = <&cp0_comphy0 1>;
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
index 0e1a1e5be3998fc08a116911dbb560caaedc4f76..f63b4fbd642b1f58c0b5833f074958be64bc54c1 100644
--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -44,25 +44,46 @@
* Device Tree file for the Armada 70x0 SoC
*/
-#include "armada-cp110-master.dtsi"
-
/ {
aliases {
- gpio1 = &cpm_gpio1;
- gpio2 = &cpm_gpio2;
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
};
};
-&cpm_gpio1 {
+/*
+ * Instantiate the CP110
+ */
+#define CP110_NAME cp0
+#define CP110_BASE f2000000
+#define CP110_PCIE_IO_BASE 0xf9000000
+#define CP110_PCIE_MEM_BASE 0xf6000000
+#define CP110_PCIE0_BASE f2600000
+#define CP110_PCIE1_BASE f2620000
+#define CP110_PCIE2_BASE f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+&cp0_gpio1 {
status = "okay";
};
-&cpm_gpio2 {
+&cp0_gpio2 {
status = "okay";
};
-&cpm_syscon0 {
- cpm_pinctrl: pinctrl {
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
compatible = "marvell,armada-7k-pinctrl";
nand_pins: nand-pins {
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 0ba0bc9425985c10256234d4fd19613a2a9fc253..3318d6b0214be984491f4a52566ce70cc1039144 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -60,6 +60,6 @@ / {
* oscillator so this one is let enabled.
*/
-&cpm_rtc {
+&cp0_rtc {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index b1f6cccc50813123daead7f637d1067ec0177cd9..dba55baff20f1db972c5d4a3f4d6f9d42ca89d53 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -61,46 +61,53 @@ memory@0 {
reg = <0x0 0x0 0x0 0x80000000>;
};
- cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth2;
+ ethernet2 = &cp1_eth0;
+ ethernet3 = &cp1_eth1;
+ };
+
+ cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
- regulator-name = "cpm-usb3h0-vbus";
+ regulator-name = "cp0-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
- cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+ cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
compatible = "regulator-fixed";
- regulator-name = "cpm-usb3h1-vbus";
+ regulator-name = "cp0-usb3h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
- cpm_usb3_0_phy: cpm-usb3-0-phy {
+ cp0_usb3_0_phy: cp0-usb3-0-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&cpm_reg_usb3_0_vbus>;
+ vcc-supply = <&cp0_reg_usb3_0_vbus>;
};
- cpm_usb3_1_phy: cpm-usb3-1-phy {
+ cp0_usb3_1_phy: cp0-usb3-1-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&cpm_reg_usb3_1_vbus>;
+ vcc-supply = <&cp0_reg_usb3_1_vbus>;
};
- cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
+ cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
compatible = "regulator-fixed";
- regulator-name = "cps-usb3h0-vbus";
+ regulator-name = "cp1-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
};
- cps_usb3_0_phy: cps-usb3-0-phy {
+ cp1_usb3_0_phy: cp1-usb3-0-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&cps_reg_usb3_0_vbus>;
+ vcc-supply = <&cp1_reg_usb3_0_vbus>;
};
};
@@ -144,16 +151,16 @@ &uart0 {
};
/* CON6 on CP0 expansion */
-&cpm_pcie0 {
+&cp0_pcie0 {
status = "okay";
};
/* CON5 on CP0 expansion */
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
status = "okay";
clock-frequency = <100000>;
@@ -178,23 +185,23 @@ expander1: pca9555@25 {
};
/* CON4 on CP0 expansion */
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
/* CON9 on CP0 expansion */
-&cpm_usb3_0 {
- usb-phy = <&cpm_usb3_0_phy>;
+&cp0_usb3_0 {
+ usb-phy = <&cp0_usb3_0_phy>;
status = "okay";
};
/* CON10 on CP0 expansion */
-&cpm_usb3_1 {
- usb-phy = <&cpm_usb3_1_phy>;
+&cp0_usb3_1 {
+ usb-phy = <&cp0_usb3_1_phy>;
status = "okay";
};
-&cpm_mdio {
+&cp0_mdio {
status = "okay";
phy1: ethernet-phy@1 {
@@ -202,42 +209,42 @@ phy1: ethernet-phy@1 {
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
/* CON6 on CP1 expansion */
-&cps_pcie0 {
+&cp1_pcie0 {
status = "okay";
};
/* CON7 on CP1 expansion */
-&cps_pcie1 {
+&cp1_pcie1 {
status = "okay";
};
/* CON5 on CP1 expansion */
-&cps_pcie2 {
+&cp1_pcie2 {
status = "okay";
};
-&cps_i2c0 {
+&cp1_i2c0 {
status = "okay";
clock-frequency = <100000>;
};
-&cps_spi1 {
+&cp1_spi1 {
status = "okay";
spi-flash@0 {
@@ -272,14 +279,14 @@ partition@f00000 {
* Proper NAND usage will require DPR-76 to be in position 1-2, which disables
* MDIO signal of CP1.
*/
-&cps_nand {
+&cp1_nand {
num-cs = <1>;
pinctrl-0 = <&nand_pins>, <&nand_rb>;
pinctrl-names = "default";
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
marvell,nand-enable-arbiter;
- marvell,system-controller = <&cps_syscon0>;
+ marvell,system-controller = <&cp1_syscon0>;
nand-on-flash-bbt;
partition@0 {
@@ -297,22 +304,22 @@ partition@1000000 {
};
/* CON4 on CP1 expansion */
-&cps_sata0 {
+&cp1_sata0 {
status = "okay";
};
/* CON9 on CP1 expansion */
-&cps_usb3_0 {
- usb-phy = <&cps_usb3_0_phy>;
+&cp1_usb3_0 {
+ usb-phy = <&cp1_usb3_0_phy>;
status = "okay";
};
/* CON10 on CP1 expansion */
-&cps_usb3_1 {
+&cp1_usb3_1 {
status = "okay";
};
-&cps_mdio {
+&cp1_mdio {
status = "okay";
phy0: ethernet-phy@0 {
@@ -320,16 +327,16 @@ phy0: ethernet-phy@0 {
};
};
-&cps_ethernet {
+&cp1_ethernet {
status = "okay";
};
-&cps_eth0 {
+&cp1_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
};
-&cps_eth1 {
+&cp1_eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
@@ -341,7 +348,7 @@ &ap_sdhci0 {
non-removable;
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
status = "okay";
bus-width = <8>;
non-removable;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index b3350827ee5583a3e4cbbbd416986f8ff7a2403e..626e9d0462c38fd0d4ab8138ad371f1250c32894 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -62,6 +62,12 @@ memory@0 {
reg = <0x0 0x0 0x0 0x80000000>;
};
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp1_eth0;
+ ethernet2 = &cp1_eth1;
+ };
+
/* Regulator labels correspond with schematics */
v_3_3: regulator-3-3v {
compatible = "regulator-fixed";
@@ -84,9 +90,9 @@ v_vddo_h: regulator-1-8v {
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -120,17 +126,17 @@ &ap_sdhci0 {
vqmmc-supply = <&v_vddo_h>;
};
-&cpm_i2c0 {
+&cp0_i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
};
-&cpm_i2c1 {
+&cp0_i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c1_pins>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
i2c-switch@70 {
@@ -157,9 +163,9 @@ sfp_1g_i2c: i2c@2 {
};
};
-&cpm_mdio {
+&cp0_mdio {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_ge_mdio_pins>;
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
status = "okay";
ge_phy: ethernet-phy@0 {
@@ -167,44 +173,44 @@ ge_phy: ethernet-phy@0 {
};
};
-&cpm_pcie0 {
+&cp0_pcie0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_pcie_pins>;
+ pinctrl-0 = <&cp0_pcie_pins>;
num-lanes = <4>;
num-viewport = <8>;
- reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
+ reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
status = "okay";
};
-&cpm_pinctrl {
- cpm_ge_mdio_pins: ge-mdio-pins {
+&cp0_pinctrl {
+ cp0_ge_mdio_pins: ge-mdio-pins {
marvell,pins = "mpp32", "mpp34";
marvell,function = "ge";
};
- cpm_i2c1_pins: i2c1-pins {
+ cp0_i2c1_pins: i2c1-pins {
marvell,pins = "mpp35", "mpp36";
marvell,function = "i2c1";
};
- cpm_i2c0_pins: i2c0-pins {
+ cp0_i2c0_pins: i2c0-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
- cpm_xhci_vbus_pins: xhci0-vbus-pins {
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
- cpm_pcie_pins: pcie-pins {
+ cp0_pcie_pins: pcie-pins {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
- cpm_sdhci_pins: sdhci-pins {
+ cp0_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
marvell,function = "sdio";
};
};
-&cpm_xmdio {
+&cp0_xmdio {
status = "okay";
phy0: ethernet-phy@0 {
@@ -218,83 +224,83 @@ phy8: ethernet-phy@8 {
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
/* Network PHY */
phy = <&phy0>;
phy-mode = "10gbase-kr";
/* Generic PHY, providing serdes lanes */
- phys = <&cpm_comphy4 0>;
+ phys = <&cp0_comphy4 0>;
};
-&cpm_sata0 {
+&cp0_sata0 {
/* CPM Lane 0 - U29 */
status = "okay";
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
/* U6 */
broken-cd;
bus-width = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
status = "okay";
vqmmc-supply = <&v_3_3>;
};
-&cpm_usb3_0 {
+&cp0_usb3_0 {
/* J38? - USB2.0 only */
status = "okay";
};
-&cpm_usb3_1 {
+&cp0_usb3_1 {
/* J38? - USB2.0 only */
status = "okay";
};
-&cps_ethernet {
+&cp1_ethernet {
status = "okay";
};
-&cps_eth0 {
+&cp1_eth0 {
status = "okay";
/* Network PHY */
phy = <&phy8>;
phy-mode = "10gbase-kr";
/* Generic PHY, providing serdes lanes */
- phys = <&cps_comphy4 0>;
+ phys = <&cp1_comphy4 0>;
};
-&cps_eth1 {
+&cp1_eth1 {
/* CPS Lane 0 - J5 (Gigabit RJ45) */
status = "okay";
/* Network PHY */
phy = <&ge_phy>;
phy-mode = "sgmii";
/* Generic PHY, providing serdes lanes */
- phys = <&cps_comphy0 1>;
+ phys = <&cp1_comphy0 1>;
};
-&cps_pinctrl {
- cps_spi1_pins: spi1-pins {
+&cp1_pinctrl {
+ cp1_spi1_pins: spi1-pins {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
};
};
-&cps_sata0 {
+&cp1_sata0 {
/* CPS Lane 1 - U32 */
/* CPS Lane 3 - U31 */
status = "okay";
};
-&cps_spi1 {
+&cp1_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cps_spi1_pins>;
+ pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
@@ -304,7 +310,7 @@ spi-flash@0 {
};
};
-&cps_usb3_0 {
+&cp1_usb3_0 {
/* CPS Lane 2 - CON7 */
usb-phy = <&usb3h0_phy>;
status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 60fe84f5cbcce45819ec5d7ac7c7dce68344aff5..83d2b40e59817e6d720ba872290244e2200d4840 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -59,6 +59,6 @@ / {
* disable it. However, the RTC clock in CP slave is connected to the
* oscillator so this one is let enabled.
*/
-&cpm_rtc {
+&cp0_rtc {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
index b280ddd3c397c7b94260cc97dbae29a1d09ac740..0d36b0fa7153bf3ba61b1ea19df6660897c9e088 100644
--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -44,34 +44,77 @@
* Device Tree file for the Armada 80x0 SoC family
*/
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
-
/ {
aliases {
- gpio1 = &cps_gpio1;
- gpio2 = &cpm_gpio2;
+ gpio1 = &cp1_gpio1;
+ gpio2 = &cp0_gpio2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ spi3 = &cp1_spi0;
+ spi4 = &cp1_spi1;
};
};
+/*
+ * Instantiate the master CP110
+ */
+#define CP110_NAME cp0
+#define CP110_BASE f2000000
+#define CP110_PCIE_IO_BASE 0xf9000000
+#define CP110_PCIE_MEM_BASE 0xf6000000
+#define CP110_PCIE0_BASE f2600000
+#define CP110_PCIE1_BASE f2620000
+#define CP110_PCIE2_BASE f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
+/*
+ * Instantiate the slave CP110
+ */
+#define CP110_NAME cp1
+#define CP110_BASE f4000000
+#define CP110_PCIE_IO_BASE 0xfd000000
+#define CP110_PCIE_MEM_BASE 0xfa000000
+#define CP110_PCIE0_BASE f4600000
+#define CP110_PCIE1_BASE f4620000
+#define CP110_PCIE2_BASE f4640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_BASE
+#undef CP110_PCIE_IO_BASE
+#undef CP110_PCIE_MEM_BASE
+#undef CP110_PCIE0_BASE
+#undef CP110_PCIE1_BASE
+#undef CP110_PCIE2_BASE
+
/* The 80x0 has two CP blocks, but uses only one block from each. */
-&cps_gpio1 {
+&cp1_gpio1 {
status = "okay";
};
-&cpm_gpio2 {
+&cp0_gpio2 {
status = "okay";
};
-&cpm_syscon0 {
- cpm_pinctrl: pinctrl {
- compatible = "marvell,armada-8k-cpm-pinctrl";
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cp0-pinctrl";
};
};
-&cps_syscon0 {
- cps_pinctrl: pinctrl {
- compatible = "marvell,armada-8k-cps-pinctrl";
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cp1-pinctrl";
nand_pins: nand-pins {
marvell,pins =
@@ -91,3 +134,14 @@ nand_rb: nand-rb {
};
};
};
+
+&cp1_crypto {
+ /*
+ * The cryptographic engine found on the cp110
+ * master is enabled by default at the SoC
+ * level. Because it is not possible as of now
+ * to enable two cryptographic engines in
+ * parallel, disable this one by default.
+ */
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index bbc5a4d3acac9f2092d752e9332ef2f46f9325ed..f9b66b81f9fccb31cca162e760cc833fb5db39f9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -58,6 +58,7 @@ aliases {
serial0 = &uart0;
serial1 = &uart1;
gpio0 = &ap_gpio;
+ spi0 = &spi0;
};
psci {
@@ -203,7 +204,6 @@ spi0: spi@510600 {
reg = <0x510600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
- cell-index = <0>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ap_clk 3>;
status = "disabled";
@@ -241,7 +241,7 @@ uart1: serial@512100 {
};
- watchdog: watchdog@600000 {
+ watchdog: watchdog@610000 {
compatible = "arm,sbsa-gwdt";
reg = <0x610000 0x1000>, <0x600000 0x1000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -286,9 +286,9 @@ ap_gpio: gpio@1040 {
};
};
- ap_thermal: thermal@6f808C {
+ ap_thermal: thermal@6f808c {
compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808C 0x4>,
+ reg = <0x6f808c 0x4>,
<0x6f8084 0x8>;
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..c6dd1d81c68de3b1bb467687e76bfd2cd2d016ce
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
deleted file mode 100644
index ecbc76d26dff41fae13552c6bd555c9ddf9de985..0000000000000000000000000000000000000000
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada CP110 Master.
- */
-
-#define ICU_GRP_NSR 0x0
-
-/ {
- cp110-master {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&cpm_icu>;
- ranges;
-
- config-space@f2000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 0xf2000000 0x2000000>;
-
- cpm_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
- clock-names = "pp_clk", "gop_clk", "mg_clk";
- marvell,system-controller = <&cpm_syscon0>;
- status = "disabled";
- dma-coherent;
-
- cpm_eth0: eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- cpm_eth1: eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- cpm_eth2: eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- cpm_comphy: phy@120000 {
- compatible = "marvell,comphy-cp110";
- reg = <0x120000 0x6000>;
- marvell,system-controller = <&cpm_syscon0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpm_comphy0: phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- cpm_comphy1: phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- cpm_comphy2: phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
-
- cpm_comphy3: phy@3 {
- reg = <3>;
- #phy-cells = <1>;
- };
-
- cpm_comphy4: phy@4 {
- reg = <4>;
- #phy-cells = <1>;
- };
-
- cpm_comphy5: phy@5 {
- reg = <5>;
- #phy-cells = <1>;
- };
- };
-
- cpm_mdio: mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>;
- status = "disabled";
- };
-
- cpm_xmdio: mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x10>;
- status = "disabled";
- };
-
- cpm_icu: interrupt-controller@1e0000 {
- compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x10>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
- };
-
- cpm_rtc: rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- cpm_thermal: thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
- };
-
- cpm_syscon0: system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x2000>;
-
- cpm_clk: clock {
- compatible = "marvell,cp110-clock";
- #clock-cells = <2>;
- };
-
- cpm_gpio1: gpio@100 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x100>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&cpm_pinctrl 0 0 32>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- cpm_gpio2: gpio@140 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x140>;
- ngpios = <31>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&cpm_pinctrl 0 32 31>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
- };
-
- cpm_usb3_0: usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 22>;
- status = "disabled";
- };
-
- cpm_usb3_1: usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 23>;
- status = "disabled";
- };
-
- cpm_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 15>;
- status = "disabled";
- };
-
- cpm_xor0: xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>,
- <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cpm_clk 1 8>;
- };
-
- cpm_xor1: xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>,
- <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cpm_clk 1 7>;
- };
-
- cpm_spi0: spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- cell-index = <1>;
- clocks = <&cpm_clk 1 21>;
- status = "disabled";
- };
-
- cpm_spi1: spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- clocks = <&cpm_clk 1 21>;
- status = "disabled";
- };
-
- cpm_i2c0: i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 21>;
- status = "disabled";
- };
-
- cpm_i2c1: i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 21>;
- status = "disabled";
- };
-
- cpm_nand: nand@720000 {
- /*
- * Due to the limiation of the pin available
- * this controller is only usable on the CPM
- * for A7K and on the CPS for A8K.
- */
- compatible = "marvell,armada-8k-nand",
- "marvell,armada370-nand";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 2>;
- marvell,system-controller = <&cpm_syscon0>;
- status = "disabled";
- };
-
- cpm_trng: trng@760000 {
- compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
- reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 25>;
- status = "okay";
- };
-
- cpm_sdhci0: sdhci@780000 {
- compatible = "marvell,armada-cp110-sdhci";
- reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core";
- clocks = <&cpm_clk 1 4>;
- dma-coherent;
- status = "disabled";
- };
-
- cpm_crypto: crypto@800000 {
- compatible = "inside-secure,safexcel-eip197";
- reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mem", "ring0", "ring1",
- "ring2", "ring3", "eip";
- clocks = <&cpm_clk 1 26>;
- dma-coherent;
- };
- };
-
- cpm_pcie0: pcie@f2600000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2600000 0 0x10000>,
- <0 0xf6f00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clocks = <&cpm_clk 1 13>;
- status = "disabled";
- };
-
- cpm_pcie1: pcie@f2620000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2620000 0 0x10000>,
- <0 0xf7f00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9010000 0 0xf9010000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cpm_clk 1 11>;
- status = "disabled";
- };
-
- cpm_pcie2: pcie@f2640000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2640000 0 0x10000>,
- <0 0xf8f00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9020000 0 0xf9020000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cpm_clk 1 12>;
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
deleted file mode 100644
index 6a07c786b7881984d1469cb87ef007189f948fb5..0000000000000000000000000000000000000000
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada CP110 Slave.
- */
-
-#define ICU_GRP_NSR 0x0
-
-/ {
- cp110-slave {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&cps_icu>;
- ranges;
-
- config-space@f4000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 0xf4000000 0x2000000>;
-
- cps_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
- clock-names = "pp_clk", "gop_clk", "mg_clk";
- marvell,system-controller = <&cps_syscon0>;
- status = "disabled";
- dma-coherent;
-
- cps_eth0: eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- cps_eth1: eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- cps_eth2: eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- cps_comphy: phy@120000 {
- compatible = "marvell,comphy-cp110";
- reg = <0x120000 0x6000>;
- marvell,system-controller = <&cps_syscon0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- cps_comphy0: phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- cps_comphy1: phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- cps_comphy2: phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
-
- cps_comphy3: phy@3 {
- reg = <3>;
- #phy-cells = <1>;
- };
-
- cps_comphy4: phy@4 {
- reg = <4>;
- #phy-cells = <1>;
- };
-
- cps_comphy5: phy@5 {
- reg = <5>;
- #phy-cells = <1>;
- };
- };
-
- cps_mdio: mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- clocks = <&cps_clk 1 9>, <&cps_clk 1 5>;
- status = "disabled";
- };
-
- cps_xmdio: mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x10>;
- status = "disabled";
- };
-
- cps_icu: interrupt-controller@1e0000 {
- compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x10>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
- };
-
- cps_rtc: rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- cps_thermal: thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
- };
-
- cps_syscon0: system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x2000>;
-
- cps_clk: clock {
- compatible = "marvell,cp110-clock";
- #clock-cells = <2>;
- };
-
- cps_gpio1: gpio@100 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x100>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&cps_pinctrl 0 0 32>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- cps_gpio2: gpio@140 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x140>;
- ngpios = <31>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&cps_pinctrl 0 32 31>;
- interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- };
-
- cps_usb3_0: usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 22>;
- status = "disabled";
- };
-
- cps_usb3_1: usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 23>;
- status = "disabled";
- };
-
- cps_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 15>;
- status = "disabled";
- };
-
- cps_xor0: xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>,
- <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cps_clk 1 8>;
- };
-
- cps_xor1: xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>,
- <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cps_clk 1 7>;
- };
-
- cps_spi0: spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- cell-index = <3>;
- clocks = <&cps_clk 1 21>;
- status = "disabled";
- };
-
- cps_spi1: spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <4>;
- clocks = <&cps_clk 1 21>;
- status = "disabled";
- };
-
- cps_i2c0: i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 21>;
- status = "disabled";
- };
-
- cps_i2c1: i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 21>;
- status = "disabled";
- };
-
- cps_nand: nand@720000 {
- /*
- * Due to the limiation of the pin available
- * this controller is only usable on the CPM
- * for A7K and on the CPS for A8K.
- */
- compatible = "marvell,armada370-nand",
- "marvell,armada-8k-nand";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 2>;
- marvell,system-controller = <&cpm_syscon0>;
- status = "disabled";
- };
-
- cps_trng: trng@760000 {
- compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
- reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 25>;
- status = "okay";
- };
-
- cps_crypto: crypto@800000 {
- compatible = "inside-secure,safexcel-eip197";
- reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mem", "ring0", "ring1",
- "ring2", "ring3", "eip";
- clocks = <&cps_clk 1 26>;
- dma-coherent;
- /*
- * The cryptographic engine found on the cp110
- * master is enabled by default at the SoC
- * level. Because it is not possible as of now
- * to enable two cryptographic engines in
- * parallel, disable this one by default.
- */
- status = "disabled";
- };
- };
-
- cps_pcie0: pcie@f4600000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4600000 0 0x10000>,
- <0 0xfaf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd000000 0 0xfd000000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clocks = <&cps_clk 1 13>;
- status = "disabled";
- };
-
- cps_pcie1: pcie@f4620000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4620000 0 0x10000>,
- <0 0xfbf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd010000 0 0xfd010000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cps_clk 1 11>;
- status = "disabled";
- };
-
- cps_pcie2: pcie@f4640000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4640000 0 0x10000>,
- <0 0xfcf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd020000 0 0xfd020000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cps_clk 1 12>;
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..a8af4136dbe7924e36678640f0d6f2c05267ff1c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada CP110.
+ */
+
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+
+#include "armada-common.dtsi"
+
+#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000))
+#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000))
+#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
+
+/ {
+ /*
+ * The contents of the node are defined below, in order to
+ * save one indentation level
+ */
+ CP110_NAME: CP110_NAME { };
+};
+
+&CP110_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&CP110_LABEL(icu)>;
+ ranges;
+
+ config-space@CP110_BASE {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
+
+ CP110_LABEL(ethernet): ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
+ <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>;
+ clock-names = "pp_clk", "gop_clk",
+ "mg_clk", "axi_clk";
+ marvell,system-controller = <&CP110_LABEL(syscon0)>;
+ status = "disabled";
+ dma-coherent;
+
+ CP110_LABEL(eth0): eth0 {
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared", "link";
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth1): eth1 {
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared", "link";
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth2): eth2 {
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared", "link";
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ CP110_LABEL(comphy): phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ marvell,system-controller = <&CP110_LABEL(syscon0)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CP110_LABEL(comphy0): phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy1): phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy2): phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy3): phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy4): phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ CP110_LABEL(comphy5): phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
+ CP110_LABEL(mdio): mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
+ <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(xmdio): mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x10>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(icu): interrupt-controller@1e0000 {
+ compatible = "marvell,cp110-icu";
+ reg = <0x1e0000 0x10>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP110_LABEL(rtc): rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ CP110_LABEL(thermal): thermal@400078 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x400078 0x4>,
+ <0x400070 0x8>;
+ };
+
+ CP110_LABEL(syscon0): system-controller@440000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x440000 0x2000>;
+
+ CP110_LABEL(clk): clock {
+ compatible = "marvell,cp110-clock";
+ #clock-cells = <2>;
+ };
+
+ CP110_LABEL(gpio1): gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(gpio2): gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ CP110_LABEL(usb3_0): usb3@500000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x500000 0x4000>;
+ dma-coherent;
+ interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(clk) 1 22>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(usb3_1): usb3@510000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x510000 0x4000>;
+ dma-coherent;
+ interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(clk) 1 23>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(sata0): sata@540000 {
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
+ reg = <0x540000 0x30000>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(clk) 1 15>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(xor0): xor@6a0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&CP110_LABEL(clk) 1 8>;
+ };
+
+ CP110_LABEL(xor1): xor@6c0000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&CP110_LABEL(clk) 1 7>;
+ };
+
+ CP110_LABEL(spi0): spi@700600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700600 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ clocks = <&CP110_LABEL(clk) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(spi1): spi@700680 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&CP110_LABEL(clk) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(i2c0): i2c@701000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(clk) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(i2c1): i2c@701100 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(clk) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(nand): nand@720000 {
+ /*
+ * Due to the limitation of the pins available
+ * this controller is only usable on the CPM
+ * for A7K and on the CPS for A8K.
+ */
+ compatible = "marvell,armada-8k-nand",
+ "marvell,armada370-nand";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(clk) 1 2>;
+ marvell,system-controller = <&CP110_LABEL(syscon0)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(trng): trng@760000 {
+ compatible = "marvell,armada-8k-rng",
+ "inside-secure,safexcel-eip76";
+ reg = <0x760000 0x7d>;
+ interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(clk) 1 25>;
+ status = "okay";
+ };
+
+ CP110_LABEL(sdhci0): sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "axi";
+ clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ CP110_LABEL(crypto): crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197";
+ reg = <0x800000 0x200000>;
+ interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mem", "ring0", "ring1",
+ "ring2", "ring3", "eip";
+ clocks = <&CP110_LABEL(clk) 1 26>;
+ dma-coherent;
+ };
+ };
+
+ CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
+ <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ num-lanes = <1>;
+ clocks = <&CP110_LABEL(clk) 1 13>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
+ <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clocks = <&CP110_LABEL(clk) 1 11>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
+ <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+ msi-parent = <&gic_v2m0>;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* downstream I/O */
+ <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000
+ /* non-prefetchable memory */
+ 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clocks = <&CP110_LABEL(clk) 1 12>;
+ status = "disabled";
+ };
+};