Merge branch 'for-upstream' of...

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2019-10-23

Here's the main bluetooth-next pull request for the 5.5 kernel:

 - Multiple fixes to hci_qca driver
 - Fix for HCI_USER_CHANNEL initialization
 - btwlink: drop superseded driver
 - Add support for Intel FW download error recovery
 - Various other smaller fixes & improvements

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/bluetooth/Kconfig

@@ -380,17 +380,6 @@ config BT_ATH3K
 	  Say Y here to compile support for "Atheros firmware download driver"
 	  into the kernel or say M to compile it as module (ath3k).
 
-config BT_WILINK
-	tristate "Texas Instruments WiLink7 driver"
-	depends on TI_ST
-	help
-	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
-	  combo devices. This makes use of shared transport line discipline
-	  core driver to communicate with the BT core of the combo chip.
-
-	  Say Y here to compile support for Texas Instrument's WiLink7 driver
-	  into the kernel or say M to compile it as module (btwilink).
-
 config BT_MTKSDIO
 	tristate "MediaTek HCI SDIO driver"
 	depends on MMC

drivers/bluetooth/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_BT_INTEL)		+= btintel.o
 obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
-obj-$(CONFIG_BT_WILINK)		+= btwilink.o
 obj-$(CONFIG_BT_MTKSDIO)	+= btmtksdio.o
 obj-$(CONFIG_BT_MTKUART)	+= btmtkuart.o
 obj-$(CONFIG_BT_QCOMSMD)	+= btqcomsmd.o

drivers/bluetooth/btintel.c

@@ -709,6 +709,51 @@ int btintel_download_firmware(struct hci_dev *hdev, const struct firmware *fw,
 }
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
+void btintel_reset_to_bootloader(struct hci_dev *hdev)
+{
+	struct intel_reset params;
+	struct sk_buff *skb;
+
+	/* Send Intel Reset command. This will result in
+	 * re-enumeration of BT controller.
+	 *
+	 * Intel Reset parameter description:
+	 * reset_type :   0x00 (Soft reset),
+	 *		  0x01 (Hard reset)
+	 * patch_enable : 0x00 (Do not enable),
+	 *		  0x01 (Enable)
+	 * ddc_reload :   0x00 (Do not reload),
+	 *		  0x01 (Reload)
+	 * boot_option:   0x00 (Current image),
+	 *                0x01 (Specified boot address)
+	 * boot_param:    Boot address
+	 *
+	 */
+	params.reset_type = 0x01;
+	params.patch_enable = 0x01;
+	params.ddc_reload = 0x01;
+	params.boot_option = 0x00;
+	params.boot_param = cpu_to_le32(0x00000000);
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params),
+			     &params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "FW download error recovery failed (%ld)",
+			   PTR_ERR(skb));
+		return;
+	}
+	bt_dev_info(hdev, "Intel reset sent to retry FW download");
+	kfree_skb(skb);
+
+	/* Current Intel BT controllers(ThP/JfP) hold the USB reset
+	 * lines for 2ms when it receives Intel Reset in bootloader mode.
+	 * Whereas, the upcoming Intel BT controllers will hold USB reset
+	 * for 150ms. To keep the delay generic, 150ms is chosen here.
+	 */
+	msleep(150);
+}
+EXPORT_SYMBOL_GPL(btintel_reset_to_bootloader);
+
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
 MODULE_VERSION(VERSION);

drivers/bluetooth/btintel.h

@@ -87,6 +87,7 @@ int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
 int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
 			      u32 *boot_param);
+void btintel_reset_to_bootloader(struct hci_dev *hdev);
 #else
 
 static inline int btintel_check_bdaddr(struct hci_dev *hdev)
@@ -181,4 +182,8 @@ static inline int btintel_download_firmware(struct hci_dev *dev,
 {
 	return -EOPNOTSUPP;
 }
+
+static inline void btintel_reset_to_bootloader(struct hci_dev *hdev)
+{
+}
 #endif

drivers/bluetooth/btrtl.c

@@ -418,7 +418,7 @@ static int rtl_download_firmware(struct hci_dev *hdev,
 		if (IS_ERR(skb)) {
 			rtl_dev_err(hdev, "download fw command failed (%ld)",
 				    PTR_ERR(skb));
-			ret = -PTR_ERR(skb);
+			ret = PTR_ERR(skb);
 			goto out;
 		}
 

drivers/bluetooth/btusb.c

@@ -2182,8 +2182,11 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 * loaded.
 	 */
 	err = btintel_read_version(hdev, &ver);
-	if (err)
+	if (err) {
+		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
 		return err;
+	}
 
 	/* The hardware platform number has a fixed value of 0x37 and
 	 * for now only accept this single value.
@@ -2326,9 +2329,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 
 	/* Start firmware downloading and get boot parameter */
 	err = btintel_download_firmware(hdev, fw, &boot_param);
-	if (err < 0)
+	if (err < 0) {
+		/* When FW download fails, send Intel Reset to retry
+		 * FW download.
+		 */
+		btintel_reset_to_bootloader(hdev);
 		goto done;
-
+	}
 	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
 
 	bt_dev_info(hdev, "Waiting for firmware download to complete");
@@ -2355,6 +2362,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (err) {
 		bt_dev_err(hdev, "Firmware loading timeout");
 		err = -ETIMEDOUT;
+		btintel_reset_to_bootloader(hdev);
 		goto done;
 	}
 
@@ -2381,8 +2389,11 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	set_bit(BTUSB_BOOTING, &data->flags);
 
 	err = btintel_send_intel_reset(hdev, boot_param);
-	if (err)
+	if (err) {
+		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
 		return err;
+	}
 
 	/* The bootloader will not indicate when the device is ready. This
 	 * is done by the operational firmware sending bootup notification.
@@ -2404,6 +2415,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 
 	if (err) {
 		bt_dev_err(hdev, "Device boot timeout");
+		btintel_reset_to_bootloader(hdev);
 		return -ETIMEDOUT;
 	}
 
@@ -2432,6 +2444,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 */
 	btintel_set_event_mask(hdev, false);
 
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version(hdev, &ver);
+	if (err)
+		return err;
+
+	btintel_version_info(hdev, &ver);
+
 	return 0;
 }
 
@@ -2489,8 +2508,6 @@ static int btusb_shutdown_intel_new(struct hci_dev *hdev)
 	return 0;
 }
 
-#ifdef CONFIG_BT_HCIBTUSB_MTK
-
 #define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
 #define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
 
@@ -3051,7 +3068,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
 
 MODULE_FIRMWARE(FIRMWARE_MT7663);
 MODULE_FIRMWARE(FIRMWARE_MT7668);
-#endif
 
 #ifdef CONFIG_PM
 /* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
@@ -3411,7 +3427,6 @@ static int btusb_setup_qca(struct hci_dev *hdev)
 	return 0;
 }
 
-#ifdef CONFIG_BT_HCIBTUSB_BCM
 static inline int __set_diag_interface(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -3498,7 +3513,6 @@ static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
 
 	return submit_or_queue_tx_urb(hdev, urb);
 }
-#endif
 
 #ifdef CONFIG_PM
 static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
@@ -3724,8 +3738,8 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_BCM92035)
 		hdev->setup = btusb_setup_bcm92035;
 
-#ifdef CONFIG_BT_HCIBTUSB_BCM
-	if (id->driver_info & BTUSB_BCM_PATCHRAM) {
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
+	    (id->driver_info & BTUSB_BCM_PATCHRAM)) {
 		hdev->manufacturer = 15;
 		hdev->setup = btbcm_setup_patchram;
 		hdev->set_diag = btusb_bcm_set_diag;
@@ -3735,7 +3749,8 @@ static int btusb_probe(struct usb_interface *intf,
 		data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
 	}
 
-	if (id->driver_info & BTUSB_BCM_APPLE) {
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
+	    (id->driver_info & BTUSB_BCM_APPLE)) {
 		hdev->manufacturer = 15;
 		hdev->setup = btbcm_setup_apple;
 		hdev->set_diag = btusb_bcm_set_diag;
@@ -3743,7 +3758,6 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Broadcom LM_DIAG Interface numbers are hardcoded */
 		data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
 	}
-#endif
 
 	if (id->driver_info & BTUSB_INTEL) {
 		hdev->manufacturer = 2;
@@ -3774,14 +3788,13 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_MARVELL)
 		hdev->set_bdaddr = btusb_set_bdaddr_marvell;
 
-#ifdef CONFIG_BT_HCIBTUSB_MTK
-	if (id->driver_info & BTUSB_MEDIATEK) {
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) &&
+	    (id->driver_info & BTUSB_MEDIATEK)) {
 		hdev->setup = btusb_mtk_setup;
 		hdev->shutdown = btusb_mtk_shutdown;
 		hdev->manufacturer = 70;
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
 	}
-#endif
 
 	if (id->driver_info & BTUSB_SWAVE) {
 		set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
@@ -3807,8 +3820,8 @@ static int btusb_probe(struct usb_interface *intf,
 		btusb_check_needs_reset_resume(intf);
 	}
 
-#ifdef CONFIG_BT_HCIBTUSB_RTL
-	if (id->driver_info & BTUSB_REALTEK) {
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
+	    (id->driver_info & BTUSB_REALTEK)) {
 		hdev->setup = btrtl_setup_realtek;
 		hdev->shutdown = btrtl_shutdown_realtek;
 		hdev->cmd_timeout = btusb_rtl_cmd_timeout;
@@ -3819,7 +3832,6 @@ static int btusb_probe(struct usb_interface *intf,
 		 */
 		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
 	}
-#endif
 
 	if (id->driver_info & BTUSB_AMP) {
 		/* AMP controllers do not support SCO packets */
@@ -3887,15 +3899,13 @@ static int btusb_probe(struct usb_interface *intf,
 			goto out_free_dev;
 	}
 
-#ifdef CONFIG_BT_HCIBTUSB_BCM
-	if (data->diag) {
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) {
 		if (!usb_driver_claim_interface(&btusb_driver,
 						data->diag, data))
 			__set_diag_interface(hdev);
 		else
 			data->diag = NULL;
 	}
-#endif
 
 	if (enable_autosuspend)
 		usb_enable_autosuspend(data->udev);

drivers/bluetooth/btwilink.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Texas Instrument's Bluetooth Driver For Shared Transport.
- *
- *  Bluetooth Driver acts as interface between HCI core and
- *  TI Shared Transport Layer.
- *
- *  Copyright (C) 2009-2010 Texas Instruments
- *  Author: Raja Mani <raja_mani@ti.com>
- *	Pavan Savoy <pavan_savoy@ti.com>
- */
-
-#include <linux/platform_device.h>
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/hci.h>
-
-#include <linux/ti_wilink_st.h>
-#include <linux/module.h>
-
-/* Bluetooth Driver Version */
-#define VERSION               "1.0"
-#define MAX_BT_CHNL_IDS		3
-
-/* Number of seconds to wait for registration completion
- * when ST returns PENDING status.
- */
-#define BT_REGISTER_TIMEOUT   6000	/* 6 sec */
-
-/**
- * struct ti_st - driver operation structure
- * @hdev: hci device pointer which binds to bt driver
- * @reg_status: ST registration callback status
- * @st_write: write function provided by the ST driver
- *	to be used by the driver during send_frame.
- * @wait_reg_completion - completion sync between ti_st_open
- *	and st_reg_completion_cb.
- */
-struct ti_st {
-	struct hci_dev *hdev;
-	int reg_status;
-	long (*st_write) (struct sk_buff *);
-	struct completion wait_reg_completion;
-};
-
-/* Increments HCI counters based on pocket ID (cmd,acl,sco) */
-static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type)
-{
-	struct hci_dev *hdev = hst->hdev;
-
-	/* Update HCI stat counters */
-	switch (pkt_type) {
-	case HCI_COMMAND_PKT:
-		hdev->stat.cmd_tx++;
-		break;
-
-	case HCI_ACLDATA_PKT:
-		hdev->stat.acl_tx++;
-		break;
-
-	case HCI_SCODATA_PKT:
-		hdev->stat.sco_tx++;
-		break;
-	}
-}
-
-/* ------- Interfaces to Shared Transport ------ */
-
-/* Called by ST layer to indicate protocol registration completion
- * status.ti_st_open() function will wait for signal from this
- * API when st_register() function returns ST_PENDING.
- */
-static void st_reg_completion_cb(void *priv_data, int data)
-{
-	struct ti_st *lhst = priv_data;
-
-	/* Save registration status for use in ti_st_open() */
-	lhst->reg_status = data;
-	/* complete the wait in ti_st_open() */
-	complete(&lhst->wait_reg_completion);
-}
-
-/* Called by Shared Transport layer when receive data is available */
-static long st_receive(void *priv_data, struct sk_buff *skb)
-{
-	struct ti_st *lhst = priv_data;
-	int err;
-
-	if (!skb)
-		return -EFAULT;
-
-	if (!lhst) {
-		kfree_skb(skb);
-		return -EFAULT;
-	}
-
-	/* Forward skb to HCI core layer */
-	err = hci_recv_frame(lhst->hdev, skb);
-	if (err < 0) {
-		BT_ERR("Unable to push skb to HCI core(%d)", err);
-		return err;
-	}
-
-	lhst->hdev->stat.byte_rx += skb->len;
-
-	return 0;
-}
-
-/* ------- Interfaces to HCI layer ------ */
-/* protocol structure registered with shared transport */
-static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
-	{
-		.chnl_id = HCI_EVENT_PKT, /* HCI Events */
-		.hdr_len = sizeof(struct hci_event_hdr),
-		.offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
-		.len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
-		.reserve = 8,
-	},
-	{
-		.chnl_id = HCI_ACLDATA_PKT, /* ACL */
-		.hdr_len = sizeof(struct hci_acl_hdr),
-		.offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen),
-		.len_size = 2,	/* sizeof(dlen) in struct hci_acl_hdr */
-		.reserve = 8,
-	},
-	{
-		.chnl_id = HCI_SCODATA_PKT, /* SCO */
-		.hdr_len = sizeof(struct hci_sco_hdr),
-		.offset_len_in_hdr = offsetof(struct hci_sco_hdr, dlen),
-		.len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
-		.reserve = 8,
-	},
-};
-
-/* Called from HCI core to initialize the device */
-static int ti_st_open(struct hci_dev *hdev)
-{
-	unsigned long timeleft;
-	struct ti_st *hst;
-	int err, i;
-
-	BT_DBG("%s %p", hdev->name, hdev);
-
-	/* provide contexts for callbacks from ST */
-	hst = hci_get_drvdata(hdev);
-
-	for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
-		ti_st_proto[i].priv_data = hst;
-		ti_st_proto[i].max_frame_size = HCI_MAX_FRAME_SIZE;
-		ti_st_proto[i].recv = st_receive;
-		ti_st_proto[i].reg_complete_cb = st_reg_completion_cb;
-
-		/* Prepare wait-for-completion handler */
-		init_completion(&hst->wait_reg_completion);
-		/* Reset ST registration callback status flag,
-		 * this value will be updated in
-		 * st_reg_completion_cb()
-		 * function whenever it called from ST driver.
-		 */
-		hst->reg_status = -EINPROGRESS;
-
-		err = st_register(&ti_st_proto[i]);
-		if (!err)
-			goto done;
-
-		if (err != -EINPROGRESS) {
-			BT_ERR("st_register failed %d", err);
-			return err;
-		}
-
-		/* ST is busy with either protocol
-		 * registration or firmware download.
-		 */
-		BT_DBG("waiting for registration "
-				"completion signal from ST");
-		timeleft = wait_for_completion_timeout
-			(&hst->wait_reg_completion,
-			 msecs_to_jiffies(BT_REGISTER_TIMEOUT));
-		if (!timeleft) {
-			BT_ERR("Timeout(%d sec),didn't get reg "
-					"completion signal from ST",
-					BT_REGISTER_TIMEOUT / 1000);
-			return -ETIMEDOUT;
-		}
-
-		/* Is ST registration callback
-		 * called with ERROR status?
-		 */
-		if (hst->reg_status != 0) {
-			BT_ERR("ST registration completed with invalid "
-					"status %d", hst->reg_status);
-			return -EAGAIN;
-		}
-
-done:
-		hst->st_write = ti_st_proto[i].write;
-		if (!hst->st_write) {
-			BT_ERR("undefined ST write function");
-			for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
-				/* Undo registration with ST */
-				err = st_unregister(&ti_st_proto[i]);
-				if (err)
-					BT_ERR("st_unregister() failed with "
-							"error %d", err);
-				hst->st_write = NULL;
-			}
-			return -EIO;
-		}
-	}
-	return 0;
-}
-
-/* Close device */
-static int ti_st_close(struct hci_dev *hdev)
-{
-	int err, i;
-	struct ti_st *hst = hci_get_drvdata(hdev);
-
-	for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
-		err = st_unregister(&ti_st_proto[i]);
-		if (err)
-			BT_ERR("st_unregister(%d) failed with error %d",
-					ti_st_proto[i].chnl_id, err);
-	}
-
-	hst->st_write = NULL;
-
-	return err;
-}
-
-static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
-{
-	struct ti_st *hst;
-	long len;
-	int pkt_type;
-
-	hst = hci_get_drvdata(hdev);
-
-	/* Prepend skb with frame type */
-	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
-
-	BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
-	       skb->len);
-
-	/* Insert skb to shared transport layer's transmit queue.
-	 * Freeing skb memory is taken care in shared transport layer,
-	 * so don't free skb memory here.
-	 */
-	pkt_type = hci_skb_pkt_type(skb);
-	len = hst->st_write(skb);
-	if (len < 0) {
-		BT_ERR("ST write failed (%ld)", len);
-		/* Try Again, would only fail if UART has gone bad */
-		return -EAGAIN;
-	}
-
-	/* ST accepted our skb. So, Go ahead and do rest */
-	hdev->stat.byte_tx += len;
-	ti_st_tx_complete(hst, pkt_type);
-
-	return 0;
-}
-
-static int bt_ti_probe(struct platform_device *pdev)
-{
-	struct ti_st *hst;
-	struct hci_dev *hdev;
-	int err;
-
-	hst = devm_kzalloc(&pdev->dev, sizeof(struct ti_st), GFP_KERNEL);
-	if (!hst)
-		return -ENOMEM;
-
-	/* Expose "hciX" device to user space */
-	hdev = hci_alloc_dev();
-	if (!hdev)
-		return -ENOMEM;
-
-	BT_DBG("hdev %p", hdev);
-
-	hst->hdev = hdev;
-	hdev->bus = HCI_UART;
-	hci_set_drvdata(hdev, hst);
-	hdev->open = ti_st_open;
-	hdev->close = ti_st_close;
-	hdev->flush = NULL;
-	hdev->send = ti_st_send_frame;
-
-	err = hci_register_dev(hdev);
-	if (err < 0) {
-		BT_ERR("Can't register HCI device error %d", err);
-		hci_free_dev(hdev);
-		return err;
-	}
-
-	BT_DBG("HCI device registered (hdev %p)", hdev);
-
-	dev_set_drvdata(&pdev->dev, hst);
-	return 0;
-}
-
-static int bt_ti_remove(struct platform_device *pdev)
-{
-	struct hci_dev *hdev;
-	struct ti_st *hst = dev_get_drvdata(&pdev->dev);
-
-	if (!hst)
-		return -EFAULT;
-
-	BT_DBG("%s", hst->hdev->name);
-
-	hdev = hst->hdev;
-	ti_st_close(hdev);
-	hci_unregister_dev(hdev);
-
-	hci_free_dev(hdev);
-
-	dev_set_drvdata(&pdev->dev, NULL);
-	return 0;
-}
-
-static struct platform_driver btwilink_driver = {
-	.probe = bt_ti_probe,
-	.remove = bt_ti_remove,
-	.driver = {
-		.name = "btwilink",
-	},
-};
-
-module_platform_driver(btwilink_driver);
-
-/* ------ Module Info ------ */
-
-MODULE_AUTHOR("Raja Mani <raja_mani@ti.com>");
-MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION);
-MODULE_VERSION(VERSION);
-MODULE_LICENSE("GPL");

drivers/bluetooth/hci_bcm.c

@@ -445,9 +445,11 @@ static int bcm_open(struct hci_uart *hu)
 
 out:
 	if (bcm->dev) {
+		hci_uart_set_flow_control(hu, true);
 		hu->init_speed = bcm->dev->init_speed;
 		hu->oper_speed = bcm->dev->oper_speed;
 		err = bcm_gpio_set_power(bcm->dev, true);
+		hci_uart_set_flow_control(hu, false);
 		if (err)
 			goto err_unset_hu;
 	}

drivers/bluetooth/hci_ll.c

@@ -621,13 +621,6 @@ static int ll_setup(struct hci_uart *hu)
 
 	serdev_device_set_flow_control(serdev, true);
 
-	if (hu->oper_speed)
-		speed = hu->oper_speed;
-	else if (hu->proto->oper_speed)
-		speed = hu->proto->oper_speed;
-	else
-		speed = 0;
-
 	do {
 		/* Reset the Bluetooth device */
 		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
@@ -639,20 +632,6 @@ static int ll_setup(struct hci_uart *hu)
 			return err;
 		}
 
-		if (speed) {
-			__le32 speed_le = cpu_to_le32(speed);
-			struct sk_buff *skb;
-
-			skb = __hci_cmd_sync(hu->hdev,
-					     HCI_VS_UPDATE_UART_HCI_BAUDRATE,
-					     sizeof(speed_le), &speed_le,
-					     HCI_INIT_TIMEOUT);
-			if (!IS_ERR(skb)) {
-				kfree_skb(skb);
-				serdev_device_set_baudrate(serdev, speed);
-			}
-		}
-
 		err = download_firmware(lldev);
 		if (!err)
 			break;
@@ -677,7 +656,25 @@ static int ll_setup(struct hci_uart *hu)
 	}
 
 	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (speed) {
+		__le32 speed_le = cpu_to_le32(speed);
+		struct sk_buff *skb;
 
+		skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE,
+				     sizeof(speed_le), &speed_le,
+				     HCI_INIT_TIMEOUT);
+		if (!IS_ERR(skb)) {
+			kfree_skb(skb);
+			serdev_device_set_baudrate(serdev, speed);
+		}
+	}
 
 	return 0;
 }

drivers/bluetooth/hci_nokia.c

@@ -520,7 +520,7 @@ static int nokia_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 		err = skb_pad(skb, 1);
 		if (err)
 			return err;
-		skb_put_u8(skb, 0x00);
+		skb_put(skb, 1);
 	}
 
 	skb_queue_tail(&btdev->txq, skb);

drivers/bluetooth/hci_qca.c

@@ -130,8 +130,6 @@ enum qca_speed_type {
  */
 struct qca_vreg {
 	const char *name;
-	unsigned int min_uV;
-	unsigned int max_uV;
 	unsigned int load_uA;
 };
 
@@ -146,8 +144,8 @@ struct qca_vreg_data {
  */
 struct qca_power {
 	struct device *dev;
-	const struct qca_vreg_data *vreg_data;
 	struct regulator_bulk_data *vreg_bulk;
+	int num_vregs;
 	bool vregs_on;
 };
 
@@ -162,7 +160,8 @@ struct qca_serdev {
 	const char *firmware_name;
 };
 
-static int qca_power_setup(struct hci_uart *hu, bool on);
+static int qca_regulator_enable(struct qca_serdev *qcadev);
+static void qca_regulator_disable(struct qca_serdev *qcadev);
 static void qca_power_shutdown(struct hci_uart *hu);
 static int qca_power_off(struct hci_dev *hdev);
 
@@ -518,7 +517,7 @@ static int qca_open(struct hci_uart *hu)
 		} else {
 			hu->init_speed = qcadev->init_speed;
 			hu->oper_speed = qcadev->oper_speed;
-			ret = qca_power_setup(hu, true);
+			ret = qca_regulator_enable(qcadev);
 			if (ret) {
 				destroy_workqueue(qca->workqueue);
 				kfree_skb(qca->rx_skb);
@@ -1188,7 +1187,7 @@ static int qca_wcn3990_init(struct hci_uart *hu)
 	qcadev = serdev_device_get_drvdata(hu->serdev);
 	if (!qcadev->bt_power->vregs_on) {
 		serdev_device_close(hu->serdev);
-		ret = qca_power_setup(hu, true);
+		ret = qca_regulator_enable(qcadev);
 		if (ret)
 			return ret;
 
@@ -1332,10 +1331,10 @@ static const struct hci_uart_proto qca_proto = {
 static const struct qca_vreg_data qca_soc_data_wcn3990 = {
 	.soc_type = QCA_WCN3990,
 	.vregs = (struct qca_vreg []) {
-		{ "vddio",   1800000, 1900000,  15000  },
-		{ "vddxo",   1800000, 1900000,  80000  },
-		{ "vddrf",   1300000, 1350000,  300000 },
-		{ "vddch0",  3300000, 3400000,  450000 },
+		{ "vddio", 15000  },
+		{ "vddxo", 80000  },
+		{ "vddrf", 300000 },
+		{ "vddch0", 450000 },
 	},
 	.num_vregs = 4,
 };
@@ -1343,19 +1342,22 @@ static const struct qca_vreg_data qca_soc_data_wcn3990 = {
 static const struct qca_vreg_data qca_soc_data_wcn3998 = {
 	.soc_type = QCA_WCN3998,
 	.vregs = (struct qca_vreg []) {
-		{ "vddio",   1800000, 1900000,  10000  },
-		{ "vddxo",   1800000, 1900000,  80000  },
-		{ "vddrf",   1300000, 1352000,  300000 },
-		{ "vddch0",  3300000, 3300000,  450000 },
+		{ "vddio", 10000  },
+		{ "vddxo", 80000  },
+		{ "vddrf", 300000 },
+		{ "vddch0", 450000 },
 	},
 	.num_vregs = 4,
 };
 
 static void qca_power_shutdown(struct hci_uart *hu)
 {
+	struct qca_serdev *qcadev;
 	struct qca_data *qca = hu->priv;
 	unsigned long flags;
 
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+
 	/* From this point we go into power off state. But serial port is
 	 * still open, stop queueing the IBS data and flush all the buffered
 	 * data in skb's.
@@ -1367,7 +1369,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
 
 	host_set_baudrate(hu, 2400);
 	qca_send_power_pulse(hu, false);
-	qca_power_setup(hu, false);
+	qca_regulator_disable(qcadev);
 }
 
 static int qca_power_off(struct hci_dev *hdev)
@@ -1383,97 +1385,71 @@ static int qca_power_off(struct hci_dev *hdev)
 	return 0;
 }
 
-static int qca_enable_regulator(struct qca_vreg vregs,
-				struct regulator *regulator)
+static int qca_regulator_enable(struct qca_serdev *qcadev)
 {
+	struct qca_power *power = qcadev->bt_power;
 	int ret;
 
-	ret = regulator_set_voltage(regulator, vregs.min_uV,
-				    vregs.max_uV);
-	if (ret)
-		return ret;
+	/* Already enabled */
+	if (power->vregs_on)
+		return 0;
 
-	if (vregs.load_uA)
-		ret = regulator_set_load(regulator,
-					 vregs.load_uA);
+	BT_DBG("enabling %d regulators)", power->num_vregs);
 
+	ret = regulator_bulk_enable(power->num_vregs, power->vreg_bulk);
 	if (ret)
 		return ret;
 
-	return regulator_enable(regulator);
+	power->vregs_on = true;
 
+	return 0;
 }
 
-static void qca_disable_regulator(struct qca_vreg vregs,
-				  struct regulator *regulator)
+static void qca_regulator_disable(struct qca_serdev *qcadev)
 {
-	regulator_disable(regulator);
-	regulator_set_voltage(regulator, 0, vregs.max_uV);
-	if (vregs.load_uA)
-		regulator_set_load(regulator, 0);
-
-}
+	struct qca_power *power;
 
-static int qca_power_setup(struct hci_uart *hu, bool on)
-{
-	struct qca_vreg *vregs;
-	struct regulator_bulk_data *vreg_bulk;
-	struct qca_serdev *qcadev;
-	int i, num_vregs, ret = 0;
-
-	qcadev = serdev_device_get_drvdata(hu->serdev);
-	if (!qcadev || !qcadev->bt_power || !qcadev->bt_power->vreg_data ||
-	    !qcadev->bt_power->vreg_bulk)
-		return -EINVAL;
-
-	vregs = qcadev->bt_power->vreg_data->vregs;
-	vreg_bulk = qcadev->bt_power->vreg_bulk;
-	num_vregs = qcadev->bt_power->vreg_data->num_vregs;
-	BT_DBG("on: %d", on);
-	if (on && !qcadev->bt_power->vregs_on) {
-		for (i = 0; i < num_vregs; i++) {
-			ret = qca_enable_regulator(vregs[i],
-						   vreg_bulk[i].consumer);
-			if (ret)
-				break;
-		}
+	if (!qcadev)
+		return;
 
-		if (ret) {
-			BT_ERR("failed to enable regulator:%s", vregs[i].name);
-			/* turn off regulators which are enabled */
-			for (i = i - 1; i >= 0; i--)
-				qca_disable_regulator(vregs[i],
-						      vreg_bulk[i].consumer);
-		} else {
-			qcadev->bt_power->vregs_on = true;
-		}
-	} else if (!on && qcadev->bt_power->vregs_on) {
-		/* turn off regulator in reverse order */
-		i = qcadev->bt_power->vreg_data->num_vregs - 1;
-		for ( ; i >= 0; i--)
-			qca_disable_regulator(vregs[i], vreg_bulk[i].consumer);
+	power = qcadev->bt_power;
 
-		qcadev->bt_power->vregs_on = false;
-	}
+	/* Already disabled? */
+	if (!power->vregs_on)
+		return;
 
-	return ret;
+	regulator_bulk_disable(power->num_vregs, power->vreg_bulk);
+	power->vregs_on = false;
 }
 
 static int qca_init_regulators(struct qca_power *qca,
 				const struct qca_vreg *vregs, size_t num_vregs)
 {
+	struct regulator_bulk_data *bulk;
+	int ret;
 	int i;
 
-	qca->vreg_bulk = devm_kcalloc(qca->dev, num_vregs,
-				      sizeof(struct regulator_bulk_data),
-				      GFP_KERNEL);
-	if (!qca->vreg_bulk)
+	bulk = devm_kcalloc(qca->dev, num_vregs, sizeof(*bulk), GFP_KERNEL);
+	if (!bulk)
 		return -ENOMEM;
 
 	for (i = 0; i < num_vregs; i++)
-		qca->vreg_bulk[i].supply = vregs[i].name;
+		bulk[i].supply = vregs[i].name;
+
+	ret = devm_regulator_bulk_get(qca->dev, num_vregs, bulk);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_vregs; i++) {
+		ret = regulator_set_load(bulk[i].consumer, vregs[i].load_uA);
+		if (ret)
+			return ret;
+	}
 
-	return devm_regulator_bulk_get(qca->dev, num_vregs, qca->vreg_bulk);
+	qca->vreg_bulk = bulk;
+	qca->num_vregs = num_vregs;
+
+	return 0;
 }
 
 static int qca_serdev_probe(struct serdev_device *serdev)
@@ -1500,7 +1476,6 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 			return -ENOMEM;
 
 		qcadev->bt_power->dev = &serdev->dev;
-		qcadev->bt_power->vreg_data = data;
 		err = qca_init_regulators(qcadev->bt_power, data->vregs,
 					  data->num_vregs);
 		if (err) {

net/bluetooth/hci_conn.c

@@ -934,6 +934,14 @@ static void hci_req_directed_advertising(struct hci_request *req,
 			return;
 
 		memset(&cp, 0, sizeof(cp));
+
+		/* Some controllers might reject command if intervals are not
+		 * within range for undirected advertising.
+		 * BCM20702A0 is known to be affected by this.
+		 */
+		cp.min_interval = cpu_to_le16(0x0020);
+		cp.max_interval = cpu_to_le16(0x0020);
+
 		cp.type = LE_ADV_DIRECT_IND;
 		cp.own_address_type = own_addr_type;
 		cp.direct_addr_type = conn->dst_type;

net/bluetooth/hci_core.c

@@ -842,8 +842,8 @@ static int hci_init4_req(struct hci_request *req, unsigned long opt)
 	if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) {
 		struct hci_cp_le_write_def_data_len cp;
 
-		cp.tx_len = hdev->le_max_tx_len;
-		cp.tx_time = hdev->le_max_tx_time;
+		cp.tx_len = cpu_to_le16(hdev->le_max_tx_len);
+		cp.tx_time = cpu_to_le16(hdev->le_max_tx_time);
 		hci_req_add(req, HCI_OP_LE_WRITE_DEF_DATA_LEN, sizeof(cp), &cp);
 	}
 
@@ -4440,7 +4440,14 @@ static void hci_rx_work(struct work_struct *work)
 			hci_send_to_sock(hdev, skb);
 		}
 
-		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
+		/* If the device has been opened in HCI_USER_CHANNEL,
+		 * the userspace has exclusive access to device.
+		 * When device is HCI_INIT, we still need to process
+		 * the data packets to the driver in order
+		 * to complete its setup().
+		 */
+		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+		    !test_bit(HCI_INIT, &hdev->flags)) {
 			kfree_skb(skb);
 			continue;
 		}

net/bluetooth/smp.c

@@ -502,15 +502,12 @@ bool smp_irk_matches(struct hci_dev *hdev, const u8 irk[16],
 		     const bdaddr_t *bdaddr)
 {
 	struct l2cap_chan *chan = hdev->smp_data;
-	struct smp_dev *smp;
 	u8 hash[3];
 	int err;
 
 	if (!chan || !chan->data)
 		return false;
 
-	smp = chan->data;
-
 	BT_DBG("RPA %pMR IRK %*phN", bdaddr, 16, irk);
 
 	err = smp_ah(irk, &bdaddr->b[3], hash);
@@ -523,14 +520,11 @@ bool smp_irk_matches(struct hci_dev *hdev, const u8 irk[16],
 int smp_generate_rpa(struct hci_dev *hdev, const u8 irk[16], bdaddr_t *rpa)
 {
 	struct l2cap_chan *chan = hdev->smp_data;
-	struct smp_dev *smp;
 	int err;
 
 	if (!chan || !chan->data)
 		return -EOPNOTSUPP;
 
-	smp = chan->data;
-
 	get_random_bytes(&rpa->b[3], 3);
 
 	rpa->b[5] &= 0x3f;	/* Clear two most significant bits */