Skip to content

L
linux
Commit 916f2ce3 authored by Mark Brown's avatar Mark Brown
Browse files
Options

ASoC: rt9120: Drop rt9210 audio amplifier support 

This drops the rt9210 support due to a race with a new version being
sent out for some incremental changes.
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent c3de683c
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 560 deletions
Documentation/devicetree/bindings/sound/richtek,rt9120.yaml deleted 100644 → 0
View file @ c3de683c
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/richtek,rt9120.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Richtek RT9120 Class-D audio amplifier
maintainers:
- ChiYuan Huang <cy_huang@richtek.com>
description: |
The RT9120 is a high efficiency, I2S-input, stereo audio power amplifier
delivering 2*20W into 8 Ohm BTL speaker loads. It supports the wide input
voltage range from 4.5V to 26.4V to meet the need on most common
applications like as TV, monitors. home entertainment, electronic music
equipment.
properties:
compatible:
enum:
- richtek,rt9120
reg:
description: I2C device address
maxItems: 1
pwdnn-gpios:
description: GPIO used for power down, low active
maxItems: 1
dvdd-supply:
description: |
Supply for the default on DVDD power, voltage domain must be 3P3V or 1P8V
'#sound-dai-cells':
const: 0
required:
- compatible
- reg
- dvdd-supply
- '#sound-dai-cells'
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
rt9120@1a {
compatible = "richtek,rt9120";
reg = <0x1a>;
pwdnn-gpios = <&gpio26 2 0>;
dvdd-supply = <&vdd_io_reg>;
#sound-dai-cells = <0>;
};
};
sound/soc/codecs/Kconfig
View file @ 916f2ce3
......@@ -191,7 +191,6 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_RT715_SDCA_SDW
imply SND_SOC_RT1308_SDW
imply SND_SOC_RT1316_SDW
imply SND_SOC_RT9120
imply SND_SOC_SDW_MOCKUP
imply SND_SOC_SGTL5000
imply SND_SOC_SI476X
......@@ -1308,15 +1307,6 @@ config SND_SOC_RT715_SDCA_SDW
select REGMAP_SOUNDWIRE
select REGMAP_SOUNDWIRE_MBQ
config SND_SOC_RT9120
tristate "Richtek RT9120 Stereo Class-D Amplifier"
depends on I2C
select REGMAP_I2C
select GPIOLIB
help
Enable support for Richtek RT9120 20W, stereo, inductor-less,
high-efficiency Class-D audio amplifier.
config SND_SOC_SDW_MOCKUP
tristate "SoundWire mockup codec"
depends on EXPERT
......
sound/soc/codecs/Makefile
View file @ 916f2ce3
......@@ -207,7 +207,6 @@ snd-soc-rt711-objs := rt711.o rt711-sdw.o
snd-soc-rt711-sdca-objs := rt711-sdca.o rt711-sdca-sdw.o
snd-soc-rt715-objs := rt715.o rt715-sdw.o
snd-soc-rt715-sdca-objs := rt715-sdca.o rt715-sdca-sdw.o
snd-soc-rt9120-objs := rt9120.o
snd-soc-sdw-mockup-objs := sdw-mockup.o
snd-soc-sgtl5000-objs := sgtl5000.o
snd-soc-alc5623-objs := alc5623.o
......@@ -540,7 +539,6 @@ obj-$(CONFIG_SND_SOC_RT711) += snd-soc-rt711.o
obj-$(CONFIG_SND_SOC_RT711_SDCA_SDW) += snd-soc-rt711-sdca.o
obj-$(CONFIG_SND_SOC_RT715) += snd-soc-rt715.o
obj-$(CONFIG_SND_SOC_RT715_SDCA_SDW) += snd-soc-rt715-sdca.o
obj-$(CONFIG_SND_SOC_RT9120) += snd-soc-rt9120.o
obj-$(CONFIG_SND_SOC_SDW_MOCKUP) += snd-soc-sdw-mockup.o
obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o
obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o
......
sound/soc/codecs/rt9120.c deleted 100644 → 0
View file @ c3de683c
// SPDX-License-Identifier: GPL-2.0
#include <linux/bits.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#define RT9120_REG_DEVID 0x00
#define RT9120_REG_I2SFMT 0x02
#define RT9120_REG_I2SWL 0x03
#define RT9120_REG_SDIOSEL 0x04
#define RT9120_REG_SYSCTL 0x05
#define RT9120_REG_SPKGAIN 0x07
#define RT9120_REG_VOLRAMP 0x0A
#define RT9120_REG_ERRRPT 0x10
#define RT9120_REG_MSVOL 0x20
#define RT9120_REG_SWRESET 0x40
#define RT9120_REG_INTERNAL0 0x65
#define RT9120_REG_INTERNAL1 0x69
#define RT9120_REG_UVPOPT 0x6C
#define RT9120_VID_MASK GENMASK(15, 8)
#define RT9120_SWRST_MASK BIT(7)
#define RT9120_MUTE_MASK GENMASK(5, 4)
#define RT9120_I2SFMT_MASK GENMASK(4, 2)
#define RT9120_I2SFMT_SHIFT 2
#define RT9120_CFG_FMT_I2S 0
#define RT9120_CFG_FMT_LEFTJ 1
#define RT9120_CFG_FMT_RIGHTJ 2
#define RT9120_CFG_FMT_DSPA 3
#define RT9120_CFG_FMT_DSPB 7
#define RT9120_AUDBIT_MASK GENMASK(1, 0)
#define RT9120_CFG_AUDBIT_16 0
#define RT9120_CFG_AUDBIT_20 1
#define RT9120_CFG_AUDBIT_24 2
#define RT9120_AUDWL_MASK GENMASK(5, 0)
#define RT9120_CFG_WORDLEN_16 16
#define RT9120_CFG_WORDLEN_24 24
#define RT9120_CFG_WORDLEN_32 32
#define RT9120_DVDD_UVSEL_MASK GENMASK(5, 4)
#define RT9120_VENDOR_ID 0x4200
#define RT9120_RESET_WAITMS 20
#define RT9120_CHIPON_WAITMS 20
#define RT9120_AMPON_WAITMS 50
#define RT9120_AMPOFF_WAITMS 100
#define RT9120_LVAPP_THRESUV 2000000
/* 8000 to 192000 supported , only 176400 not support */
#define RT9120_RATES_MASK (SNDRV_PCM_RATE_8000_192000 &\
~SNDRV_PCM_RATE_176400)
#define RT9120_FMTS_MASK (SNDRV_PCM_FMTBIT_S16_LE |\
SNDRV_PCM_FMTBIT_S24_LE |\
SNDRV_PCM_FMTBIT_S32_LE)
struct rt9120_data {
struct device *dev;
struct regmap *regmap;
};
/* 11bit [min,max,step] = [-103.9375dB, 24dB, 0.0625dB] */
static const DECLARE_TLV_DB_SCALE(digital_gain, -1039375, 625, -1039375);
static const char * const sdo_select_text[] = {
"None", "INTF", "Final", "RMS Detect"
};
static const struct soc_enum sdo_select_enum =
SOC_ENUM_SINGLE(RT9120_REG_SDIOSEL, 4, ARRAY_SIZE(sdo_select_text),
sdo_select_text);
static const struct snd_kcontrol_new rt9120_snd_controls[] = {
SOC_SINGLE_TLV("MS Volume", RT9120_REG_MSVOL, 0, 2047, 1, digital_gain),
SOC_SINGLE("SPK Volume", RT9120_REG_SPKGAIN, 0, 7, 0),
SOC_SINGLE("PBTL Switch", RT9120_REG_SYSCTL, 3, 1, 0),
SOC_ENUM("SDO Select", sdo_select_enum),
};
static int internal_power_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
snd_soc_component_write(comp, RT9120_REG_ERRRPT, 0);
break;
case SND_SOC_DAPM_POST_PMU:
msleep(RT9120_AMPON_WAITMS);
break;
case SND_SOC_DAPM_POST_PMD:
msleep(RT9120_AMPOFF_WAITMS);
break;
default:
break;
}
return 0;
}
static const struct snd_soc_dapm_widget rt9120_dapm_widgets[] = {
SND_SOC_DAPM_MIXER("DMIX", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_DAC("LDAC", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_DAC("RDAC", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_SUPPLY("PWND", RT9120_REG_SYSCTL, 6, 1,
internal_power_event, SND_SOC_DAPM_PRE_PMU |
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_PGA("SPKL PA", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("SPKR PA", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_OUTPUT("SPKL"),
SND_SOC_DAPM_OUTPUT("SPKR"),
};
static const struct snd_soc_dapm_route rt9120_dapm_routes[] = {
{ "DMIX", NULL, "AIF Playback" },
/* SPKL */
{ "LDAC", NULL, "PWND" },
{ "LDAC", NULL, "DMIX" },
{ "SPKL PA", NULL, "LDAC" },
{ "SPKL", NULL, "SPKL PA" },
/* SPKR */
{ "RDAC", NULL, "PWND" },
{ "RDAC", NULL, "DMIX" },
{ "SPKR PA", NULL, "RDAC" },
{ "SPKR", NULL, "SPKR PA" },
/* Cap */
{ "AIF Capture", NULL, "LDAC" },
{ "AIF Capture", NULL, "RDAC" },
};
static int rt9120_codec_probe(struct snd_soc_component *comp)
{
struct rt9120_data *data = snd_soc_component_get_drvdata(comp);
snd_soc_component_init_regmap(comp, data->regmap);
/* Internal setting */
snd_soc_component_write(comp, RT9120_REG_INTERNAL1, 0x03);
snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x69);
return 0;
}
static const struct snd_soc_component_driver rt9120_component_driver = {
.probe = rt9120_codec_probe,
.controls = rt9120_snd_controls,
.num_controls = ARRAY_SIZE(rt9120_snd_controls),
.dapm_widgets = rt9120_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(rt9120_dapm_widgets),
.dapm_routes = rt9120_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(rt9120_dapm_routes),
};
static int rt9120_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_component *comp = dai->component;
unsigned int format;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
format = RT9120_CFG_FMT_I2S;
break;
case SND_SOC_DAIFMT_LEFT_J:
format = RT9120_CFG_FMT_LEFTJ;
break;
case SND_SOC_DAIFMT_RIGHT_J:
format = RT9120_CFG_FMT_RIGHTJ;
break;
case SND_SOC_DAIFMT_DSP_A:
format = RT9120_CFG_FMT_DSPA;
break;
case SND_SOC_DAIFMT_DSP_B:
format = RT9120_CFG_FMT_DSPB;
break;
default:
dev_err(dai->dev, "Unknown dai format\n");
return -EINVAL;
}
snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT,
RT9120_I2SFMT_MASK,
format << RT9120_I2SFMT_SHIFT);
return 0;
}
static int rt9120_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *param,
struct snd_soc_dai *dai)
{
struct snd_soc_component *comp = dai->component;
unsigned int param_width, param_slot_width;
int width;
switch (width = params_width(param)) {
case 16:
param_width = RT9120_CFG_AUDBIT_16;
break;
case 20:
param_width = RT9120_CFG_AUDBIT_20;
break;
case 24:
case 32:
param_width = RT9120_CFG_AUDBIT_24;
break;
default:
dev_err(dai->dev, "Unsupported data width [%d]\n", width);
return -EINVAL;
}
snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT,
RT9120_AUDBIT_MASK, param_width);
switch (width = params_physical_width(param)) {
case 16:
param_slot_width = RT9120_CFG_WORDLEN_16;
break;
case 24:
param_slot_width = RT9120_CFG_WORDLEN_24;
break;
case 32:
param_slot_width = RT9120_CFG_WORDLEN_32;
break;
default:
dev_err(dai->dev, "Unsupported slot width [%d]\n", width);
return -EINVAL;
}
snd_soc_component_update_bits(comp, RT9120_REG_I2SWL,
RT9120_AUDWL_MASK, param_slot_width);
return 0;
}
static const struct snd_soc_dai_ops rt9120_dai_ops = {
.set_fmt = rt9120_set_fmt,
.hw_params = rt9120_hw_params,
};
static struct snd_soc_dai_driver rt9120_dai = {
.name = "rt9120_aif",
.playback = {
.stream_name = "AIF Playback",
.rates = RT9120_RATES_MASK,
.formats = RT9120_FMTS_MASK,
.rate_max = 192000,
.rate_min = 8000,
.channels_min = 1,
.channels_max = 2,
},
.capture = {
.stream_name = "AIF Capture",
.rates = RT9120_RATES_MASK,
.formats = RT9120_FMTS_MASK,
.rate_max = 192000,
.rate_min = 8000,
.channels_min = 1,
.channels_max = 2,
},
.ops = &rt9120_dai_ops,
.symmetric_rate = 1,
.symmetric_sample_bits = 1,
};
static const struct regmap_range rt9120_rd_yes_ranges[] = {
regmap_reg_range(0x00, 0x0C),
regmap_reg_range(0x10, 0x15),
regmap_reg_range(0x20, 0x27),
regmap_reg_range(0x30, 0x38),
regmap_reg_range(0x3A, 0x40),
regmap_reg_range(0x65, 0x65),
regmap_reg_range(0x69, 0x69),
regmap_reg_range(0x6C, 0x6C)
};
static const struct regmap_access_table rt9120_rd_table = {
.yes_ranges = rt9120_rd_yes_ranges,
.n_yes_ranges = ARRAY_SIZE(rt9120_rd_yes_ranges),
};
static const struct regmap_range rt9120_wr_yes_ranges[] = {
regmap_reg_range(0x00, 0x00),
regmap_reg_range(0x02, 0x0A),
regmap_reg_range(0x10, 0x15),
regmap_reg_range(0x20, 0x27),
regmap_reg_range(0x30, 0x38),
regmap_reg_range(0x3A, 0x3D),
regmap_reg_range(0x40, 0x40),
regmap_reg_range(0x65, 0x65),
regmap_reg_range(0x69, 0x69),
regmap_reg_range(0x6C, 0x6C)
};
static const struct regmap_access_table rt9120_wr_table = {
.yes_ranges = rt9120_wr_yes_ranges,
.n_yes_ranges = ARRAY_SIZE(rt9120_wr_yes_ranges),
};
static int rt9120_get_reg_size(unsigned int reg)
{
switch (reg) {
case 0x00:
case 0x09:
case 0x20 ... 0x27:
return 2;
case 0x30 ... 0x3D:
return 3;
case 0x3E ... 0x3F:
return 4;
default:
return 1;
}
}
static int rt9120_reg_read(void *context, unsigned int reg, unsigned int *val)
{
struct rt9120_data *data = context;
struct i2c_client *i2c = to_i2c_client(data->dev);
int size = rt9120_get_reg_size(reg);
u8 raw[4] = {0};
int ret;
ret = i2c_smbus_read_i2c_block_data(i2c, reg, size, raw);
if (ret < 0)
return ret;
else if (ret != size)
return -EIO;
switch (size) {
case 4:
*val = be32_to_cpup((__be32 *)raw);
break;
case 3:
*val = raw[0] << 16 | raw[1] << 8 | raw[0];
break;
case 2:
*val = be16_to_cpup((__be16 *)raw);
break;
default:
*val = raw[0];
}
return 0;
}
static int rt9120_reg_write(void *context, unsigned int reg, unsigned int val)
{
struct rt9120_data *data = context;
struct i2c_client *i2c = to_i2c_client(data->dev);
int size = rt9120_get_reg_size(reg);
__be32 be32_val;
u8 *rawp = (u8 *)&be32_val;
int offs = 4 - size;
be32_val = cpu_to_be32(val);
return i2c_smbus_write_i2c_block_data(i2c, reg, size, rawp + offs);
}
static const struct regmap_config rt9120_regmap_config = {
.reg_bits = 8,
.val_bits = 32,
.max_register = RT9120_REG_UVPOPT,
.reg_read = rt9120_reg_read,
.reg_write = rt9120_reg_write,
.wr_table = &rt9120_wr_table,
.rd_table = &rt9120_rd_table,
};
static int rt9120_check_vendor_info(struct rt9120_data *data)
{
unsigned int devid;
int ret;
ret = regmap_read(data->regmap, RT9120_REG_DEVID, &devid);
if (ret)
return ret;
if ((devid & RT9120_VID_MASK) != RT9120_VENDOR_ID) {
dev_err(data->dev, "DEVID not correct [0x%04x]\n", devid);
return -ENODEV;
}
return 0;
}
static int rt9120_do_register_reset(struct rt9120_data *data)
{
int ret;
ret = regmap_write(data->regmap, RT9120_REG_SWRESET,
RT9120_SWRST_MASK);
if (ret)
return ret;
msleep(RT9120_RESET_WAITMS);
return 0;
}
static int rt9120_probe(struct i2c_client *i2c)
{
struct rt9120_data *data;
struct gpio_desc *pwdnn_gpio;
struct regulator *dvdd_supply;
int dvdd_supply_volt, ret;
data = devm_kzalloc(&i2c->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->dev = &i2c->dev;
i2c_set_clientdata(i2c, data);
pwdnn_gpio = devm_gpiod_get_optional(&i2c->dev, "pwdnn",
GPIOD_OUT_HIGH);
if (IS_ERR(pwdnn_gpio)) {
dev_err(&i2c->dev, "Failed to initialize 'pwdnn' gpio\n");
return PTR_ERR(pwdnn_gpio);
} else if (pwdnn_gpio) {
dev_dbg(&i2c->dev, "'pwdnn' from low to high, wait chip on\n");
msleep(RT9120_CHIPON_WAITMS);
}
data->regmap = devm_regmap_init(&i2c->dev, NULL, data,
&rt9120_regmap_config);
if (IS_ERR(data->regmap)) {
ret = PTR_ERR(data->regmap);
dev_err(&i2c->dev, "Failed to init regmap [%d]\n", ret);
return ret;
}
ret = rt9120_check_vendor_info(data);
if (ret) {
dev_err(&i2c->dev, "Failed to check vendor info\n");
return ret;
}
ret = rt9120_do_register_reset(data);
if (ret) {
dev_err(&i2c->dev, "Failed to do register reset\n");
return ret;
}
dvdd_supply = devm_regulator_get(&i2c->dev, "dvdd");
if (IS_ERR(dvdd_supply)) {
dev_err(&i2c->dev, "No dvdd regulator found\n");
return PTR_ERR(dvdd_supply);
}
dvdd_supply_volt = regulator_get_voltage(dvdd_supply);
if (dvdd_supply_volt <= RT9120_LVAPP_THRESUV) {
dev_dbg(&i2c->dev, "dvdd low voltage design\n");
ret = regmap_update_bits(data->regmap, RT9120_REG_UVPOPT,
RT9120_DVDD_UVSEL_MASK, 0);
if (ret) {
dev_err(&i2c->dev, "Failed to config dvdd uvsel\n");
return ret;
}
}
return devm_snd_soc_register_component(&i2c->dev,
&rt9120_component_driver,
&rt9120_dai, 1);
}
static const struct of_device_id __maybe_unused rt9120_device_table[] = {
{ .compatible = "richtek,rt9120", },
{ }
};
MODULE_DEVICE_TABLE(of, rt9120_device_table);
static struct i2c_driver rt9120_driver = {
.driver = {
.name = "rt9120",
.of_match_table = rt9120_device_table,
},
.probe_new = rt9120_probe,
};
module_i2c_driver(rt9120_driver);
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
MODULE_DESCRIPTION("RT9120 Audio Amplifier Driver");
MODULE_LICENSE("GPL");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7