Merge branch 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: using correct fifo size for SCIF and SCIFA ports.
  sh: mach-ecovec24: Add motion sensor driver support.

arch/sh/boards/mach-ecovec24/setup.c

@@ -353,6 +353,10 @@ static struct i2c_board_info i2c1_devices[] = {
 	{
 		I2C_BOARD_INFO("r2025sd", 0x32),
 	},
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1c),
+		.irq = 33,
+	}
 };
 
 /* KEYSC */
@@ -1115,6 +1119,10 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTU0, 0);
 	mdelay(20);
 
+	/* enable motion sensor */
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));

drivers/serial/sh-sci.c

@@ -1052,7 +1052,18 @@ static void __devinit sci_init_single(struct platform_device *dev,
 	sci_port->port.ops	= &sci_uart_ops;
 	sci_port->port.iotype	= UPIO_MEM;
 	sci_port->port.line	= index;
+
+	switch (p->type) {
+	case PORT_SCIFA:
+		sci_port->port.fifosize = 64;
+		break;
+	case PORT_SCIF:
+		sci_port->port.fifosize = 16;
+		break;
+	default:
 		sci_port->port.fifosize = 1;
+		break;
+	}
 
 	if (dev) {
 		sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;