Commit 9983822c authored by Fabien Parent's avatar Fabien Parent Committed by Matthias Brugger

arm64: dts: mediatek: add pumpkin board dts

The pumpkin board is  made by Gossamer Engineering and is using
a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A,
Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in),
serial over USB, and an expansion header.

Additionally there is a HDMI port, DSI port, and camera port only
on the MT8167 version of the board.

The board can be powered by battery and/or via a USB Type-C port and
is using a PMIC MT6392.

The eMMC and NAND are sharing pins and cannot be used together.

This commit is adding the basic boot support for the Pumpkin MT8516
board on the eMMC.
Signed-off-by: default avatarFabien Parent <fparent@baylibre.com>
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent 5236347b
......@@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 BayLibre, SAS.
* Author: Fabien Parent <fparent@baylibre.com>
*/
/dts-v1/;
#include "mt8516.dtsi"
#include "pumpkin-common.dtsi"
/ {
model = "Pumpkin MT8516";
compatible = "mediatek,mt8516";
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
};
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 BayLibre, SAS.
* Author: Fabien Parent <fparent@baylibre.com>
*/
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:921600n8";
};
firmware {
optee: optee@4fd00000 {
compatible = "linaro,optee-tz";
method = "smc";
};
};
gpio-keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
volume-up {
gpios = <&pio 42 GPIO_ACTIVE_LOW>;
label = "volume_up";
linux,code = <115>;
wakeup-source;
debounce-interval = <15>;
};
volume-down {
gpios = <&pio 43 GPIO_ACTIVE_LOW>;
label = "volume_down";
linux,code = <114>;
wakeup-source;
debounce-interval = <15>;
};
};
};
&i2c0 {
clock-div = <2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
rst-gpio = <&pio 65 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&tca6416_pins>;
gpio-controller;
#gpio-cells = <2>;
eint20_mux_sel0 {
gpio-hog;
gpios = <0 0>;
input;
line-name = "eint20_mux_sel0";
};
expcon_mux_sel1 {
gpio-hog;
gpios = <1 0>;
input;
line-name = "expcon_mux_sel1";
};
mrg_di_mux_sel2 {
gpio-hog;
gpios = <2 0>;
input;
line-name = "mrg_di_mux_sel2";
};
sd_sdio_mux_sel3 {
gpio-hog;
gpios = <3 0>;
input;
line-name = "sd_sdio_mux_sel3";
};
sd_sdio_mux_ctrl7 {
gpio-hog;
gpios = <7 0>;
output-low;
line-name = "sd_sdio_mux_ctrl7";
};
hw_id0 {
gpio-hog;
gpios = <8 0>;
input;
line-name = "hw_id0";
};
hw_id1 {
gpio-hog;
gpios = <9 0>;
input;
line-name = "hw_id1";
};
hw_id2 {
gpio-hog;
gpios = <10 0>;
input;
line-name = "hw_id2";
};
fg_int_n {
gpio-hog;
gpios = <11 0>;
input;
line-name = "fg_int_n";
};
usba_pwr_en {
gpio-hog;
gpios = <12 0>;
output-high;
line-name = "usba_pwr_en";
};
wifi_3v3_pg {
gpio-hog;
gpios = <13 0>;
input;
line-name = "wifi_3v3_pg";
};
cam_rst {
gpio-hog;
gpios = <14 0>;
output-low;
line-name = "cam_rst";
};
cam_pwdn {
gpio-hog;
gpios = <15 0>;
output-low;
line-name = "cam_pwdn";
};
};
};
&i2c2 {
clock-div = <2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&uart0 {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "peripheral";
usb_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
};
};
&usb0_phy {
status = "okay";
};
&pio {
gpio_keys_default: gpiodefault {
pins_cmd_dat {
pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
<MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
bias-pull-up;
input-enable;
};
};
i2c0_pins_a: i2c0@0 {
pins1 {
pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
<MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
bias-disable;
};
};
i2c2_pins_a: i2c2@0 {
pins1 {
pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
<MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
bias-disable;
};
};
tca6416_pins: pinmux_tca6416_pins {
gpio_mux_rst_n_pin {
pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
output-high;
};
gpio_mux_int_n_pin {
pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
input-enable;
bias-pull-up;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment