brcmfmac: correctly report average RSSI in station info

The rx_lastpkt_rssi field provided by the firmware is suitable for
NL80211_STA_INFO_{SIGNAL,CHAIN_SIGNAL}, while the rssi field is an
average. Fix up the assignments and set the correct STA_INFO bits. This
lets userspace know that the average RSSI is part of the station info.

Fixes: cae355dc ("brcmfmac: Add RSSI information to get_station.")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506132010.3964484-2-alsi@bang-olufsen.dk

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c

@@ -2767,8 +2767,9 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 	struct brcmf_sta_info_le sta_info_le;
 	u32 sta_flags;
 	u32 is_tdls_peer;
-	s32 total_rssi;
-	s32 count_rssi;
+	s32 total_rssi_avg = 0;
+	s32 total_rssi = 0;
+	s32 count_rssi = 0;
 	int rssi;
 	u32 i;
 
@@ -2834,24 +2835,27 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_BYTES);
 			sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
 		}
-		total_rssi = 0;
-		count_rssi = 0;
 		for (i = 0; i < BRCMF_ANT_MAX; i++) {
-			if (sta_info_le.rssi[i]) {
+			if (sta_info_le.rssi[i] == 0 ||
+			    sta_info_le.rx_lastpkt_rssi[i] == 0)
+				continue;
 			sinfo->chains |= BIT(count_rssi);
-				sinfo->chain_signal_avg[count_rssi] =
-					sta_info_le.rssi[i];
 			sinfo->chain_signal[count_rssi] =
+				sta_info_le.rx_lastpkt_rssi[i];
+			sinfo->chain_signal_avg[count_rssi] =
 				sta_info_le.rssi[i];
-				total_rssi += sta_info_le.rssi[i];
+			total_rssi += sta_info_le.rx_lastpkt_rssi[i];
+			total_rssi_avg += sta_info_le.rssi[i];
 			count_rssi++;
 		}
-		}
 		if (count_rssi) {
-			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL);
 			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
-			total_rssi /= count_rssi;
-			sinfo->signal = total_rssi;
+			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL_AVG);
+			sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL);
+			sinfo->filled |=
+				BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL_AVG);
+			sinfo->signal = total_rssi / count_rssi;
+			sinfo->signal_avg = total_rssi_avg / count_rssi;
 		} else if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
 			&ifp->vif->sme_state)) {
 			memset(&scb_val, 0, sizeof(scb_val));