Commit 9aa3558a authored by Takeshi Kihara's avatar Takeshi Kihara Committed by Simon Horman

arm64: dts: renesas: ebisu: Add and enable SDHI device nodes

This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC
and enables SD card slot connected to SDHI0, micro SD card slot
connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board
using the R8A77990 SoC.
Signed-off-by: default avatarTakeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: default avatarMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent f3962b82
...@@ -129,6 +129,15 @@ adv7123_out: endpoint { ...@@ -129,6 +129,15 @@ adv7123_out: endpoint {
}; };
}; };
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator1 { reg_3p3v: regulator1 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "fixed-3.3V"; regulator-name = "fixed-3.3V";
...@@ -180,6 +189,54 @@ x13_clk: x13 { ...@@ -180,6 +189,54 @@ x13_clk: x13 {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <74250000>; clock-frequency = <74250000>;
}; };
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
}; };
&audio_clk_a { &audio_clk_a {
...@@ -410,6 +467,36 @@ pwm5_pins: pwm5 { ...@@ -410,6 +467,36 @@ pwm5_pins: pwm5 {
function = "pwm5"; function = "pwm5";
}; };
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sdhi1_pins: sd1 {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <3300>;
};
sdhi1_pins_uhs: sd1_uhs {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <1800>;
};
sdhi3_pins: sd3 {
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
function = "sdhi3";
power-source = <1800>;
};
sound_pins: sound { sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
function = "ssi"; function = "ssi";
...@@ -531,3 +618,46 @@ &xhci0 { ...@@ -531,3 +618,46 @@ &xhci0 {
status = "okay"; status = "okay";
}; };
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi1 {
pinctrl-0 = <&sdhi1_pins>;
pinctrl-1 = <&sdhi1_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi3 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi3_pins>;
pinctrl-1 = <&sdhi3_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
mmc-hs200-1_8v;
bus-width = <8>;
non-removable;
status = "okay";
};
...@@ -1351,6 +1351,42 @@ usb2_phy0: usb-phy@ee080200 { ...@@ -1351,6 +1351,42 @@ usb2_phy0: usb-phy@ee080200 {
status = "disabled"; status = "disabled";
}; };
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77990",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 314>;
status = "disabled";
};
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-r8a77990",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 313>;
status = "disabled";
};
sdhi3: sd@ee160000 {
compatible = "renesas,sdhi-r8a77990",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 311>;
status = "disabled";
};
gic: interrupt-controller@f1010000 { gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400"; compatible = "arm,gic-400";
#interrupt-cells = <3>; #interrupt-cells = <3>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment